Satellite L300D-243 and WLAN - limited connectivity

I've just got an L300D-243 and it is mostly lovely, but ... when I try to connect to our wireless internet I keep getting a 'limited connectivity' notification. I'm using system pack one so it's not the fault known in system pack 2. It works fine when I use the internet cable, but that kind of defeats the purpose of having a computer I can carry around.
So, can anyone suggest a cure?
Trizia

Hi!
Please check the link posted by Feliks. It seems that it could solve your issue with the WLAN connection.
Furthermore I can recommend installing the newest WLAN driver from Intel. On my Satellite L300 I had some issues with the WLAN connection and a driver update could solve the problem! :)
Bye

Similar Messages

Satellite L300D - Determine the WLAN card

I need help determine what wireless card to get for this L300D 11V PSLC0E-00900DEN laptop.
I have looked on this web site for laptop but do not exist. Model name is different to the one on this site. I assumed this laptop came with wireless built in because it had the sticker on it. Bought just before Christmas for my little brother from pc world.
I cant make out whoever its card bus or express card slot or pc card slot.
Any help would be grateful

This Satellite L300D laptop has a Realtek RTL8187B WLAN card.
The laptop is listed on the Toshiba driver download page and the Realtek driver too. I found exact your model.
http://eu.computers.toshiba-europe.com
The slot on the side is an express card slot.

Port is down down if I connect the cable and its limited connectivity

Dear All,
I have 4506 with WS-X4648-RJ45V+E. If I connect the cable on one port it is showing down down and on PC it is limited connectivity.
Please suggest.
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.02.00.XO RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 22-Sep-11 20:42 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
Image text-base: 0x100A12B4, data-base: 0x13F29B60
ROM: 15.0(1r)SG3
Jawa Revision 7, Winter Revision 0x0.0x3
DLD-03-4506 uptime is 10 weeks, 2 days, 2 hours, 47 minutes
System returned to ROM by power-on
Running default software
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Information for 'WS-X45-SUP7L-E'
License Level: lanbase Type: Permanent
Next reboot license Level: lanbase
cisco WS-C4506-E (MPC8572) processor (revision 4) with 2097152K/20480K bytes of memory.
Processor board ID SPE1625010J
MPC8572 CPU at 1.5GHz, Supervisor 7L-E
Last reset from PowerUp
2 Virtual Ethernet interfaces
244 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Thank You,
Abhisar.

Dear Leo,
TAC has suggested to upgrade IOS because of BUG.
https://tools.cisco.com/bugsearch/bug/CSCsv15915/?reffering_site=dumpcr
Thank You,
Abhisar.

Re: Satellite L300D-243 - CD drive doesn??t reject the CD disk sometimes

Hi
every time I'm using a CD I have to turn off laptop-and switch on after some time because cd won't come out.
Any suggestions.

Hi
Every ODD (CD/DVD drive) contains a tiny whole near the eject button.
If the disk drive wont reject the disk then you could try use and insert a small object (bracket, wire, etc) in order to reject the inserted disk.
But usually this should not happen and if this will happen very often then you should contact the technician because this issue could be related to the hardware issue
Cheers

Windows fails to load on my Satellite L300d-243

When I turn my laptop on windows fails to load. This happened just after a windows update, I dont have installation disks and I cant load into safe mode or anything.
What can I do?

this may be a stupid question but bios is F12?
ive set that to default and the same happens, windows failed to start. A recent hardware of software change might be the cause. To fix problem:
1. Insert your windows installation disc and restart your computer.
2.Choose you language settings, and clich "Next".
3.Click "repair your computer"
If you do not hve this disc, contact your systems admin or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot config data.

Satellite L300D - Overheating and turn off

If I mean computers start and I a play to play would like turn off he after certain time simply in such a way. ask urgently for assistance

Hi
To be honest your posting is hard to understand and I dont know what you mean exactly. Furthermore you should also post some more details about your OS, drivers, BIOS and installed games or applications where this happen.
But if your notebook is overheating I would recommend cleaning it using compressed air spray as per description:
http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm

Satellite P50T-A-125 - Wi-Fi Connectivity issues

I am having major issues connecting to WiFi with a Satellite P50t-A-125 laptop.
We have 3 of these laptops in the house, but only having WiFi connectivity problems with one of them.
It doesn't matter where the laptop is located (i.e. house, hotel, overseas etc ), the problem is the same.
It will connect to the WiFi local 'hot spot' / hub, but will not connect to the internet and the "limited connectivity" message comes up.
This is a very annoying and time consuming problem, any help or advice in resolving it would be greatly appreciated.
Best regards - SSG.

Hi
I think you should start with WLan driver update.
Mostly such limited connection issues could be solved by Wlan driver updates.
From my knowledge the notebook was equipped with Intel Wireless-N 7260 Plus Bluetooth Wlan card
The newest driver for this Intel page could be downloaded from Intel website:
[Intel Wireless-N 7260|https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+ Networking&ProductLine=Intel%C2%AE+Wi-Fi+Products&ProductProduct=Intel%C2%AE+Wireless-N+7260&ProdId=3713&LineId=1784&FamilyId=1783]
Feedback appreciated

Satellite L300D-21P - Installation of Windows Vista 32bit failed

Hi!
I have recently bought a Toshiba Satellite L300D-21P and now I wanted to install Windows Vista Business 32bit.
But the installation always stops at the point where the screen says "Completing installation ... ".
Do you have any idea what I have to do to solve this problem?
Thank you very much for your answers!
Greetz
Stefan

If you are using the Toshiba Recovery disk then you dont need to install SATA drivers.
If you are using Microsoft disk then you will need the SATA drivers.
But if the error message says that the installation is complete then the HDD has been recognized properly and you should not need the SATA drivers in such case.
> From where do I get the SATA-drivers?
It looks like your notebook supports AMD CPU and ATI chipset.
Graphic card driver contains the chipset driver and the necessary SATA drivers.
The graphic card driver contains the different folder and the drivers are placed in folder:
Packages\Drivers\SBDrv\Filter\NB

Wireless guest users are getting limited connectivity.

Could anyone help please, I have a wireless guest solution consist of :
WLC located internal in the network – all the AP are associated with that WLC-.
Anchor WLC located in the DMZ . the guest SSID are tunneled from the internal WLC to the Anchor WLC, the DHCP service for guest users is on the Anchor WLC.
NAC guest server to authenticate the guest users.
The solution was working properly but now we have a problem that if any one tried to connect to the guest SSID if he is authorized or not , the user will get IP address from the DHCP pool and now as you know most of people has smart phones and they try to get internet access. Now only 5 or 6 people authenticated with NAC gest server and the DHCP pool become full because too many people tried to connect even they do not authenticate.
so if any user trys to cnnect he will not get IP address from the anchor controller and getting limited connectivity.
if I add static IP address on my Laptop , I will be redirected to the authentication page and can access normally.
I am working in big environment 7,000 users so I can’t go with increasing the DHCP pool because the problem will not be solved.
I hope if anyone can help in this case.
Thanks in advance.

This is a pitfall and raising the eyebrows.. currently we do not have anyother option other than using a WPA-PSK + WEB AUTH
that is..
PSK will block the users to just grab an IP and sit!! , if the user enters a valid PSK, he will get the IP address and followed by the Web auth process!! this may help u as of now.. or just a work around.. to overcome the IP exhaustion..
Please rasie a PER with your accounts team to raise the severity on this issue if u have the contract n all with us!!
Please dont forget to rate the usefull posts!!
Regards
Surendra

Limited Connectivity for users

Hi all,
We have 2 WLC connected with 7 RAPs and 16 MAPs , but some users connected to some APs don't get the DHCP IP and showing limited connectivity.
But when I restart the APs ,they are able to connect sucessfully.
The configurations of CoreSwitch,Access Switches and WLC screenshots are herewith attached.
Any help appreciated.
Sudeesh

Which APs are you restarting? The Maps or the Raps?
One thing you should check is the mesh path back to the RAP before & after the reboot of the AP. That may shed some light on the issue if the MAP initially has an efficient path back to the RAP but then degrades after a while. Is the issue happening in a specific area?

Satellite A300-243 - Easy Keys & Recovery Disc don't work

Hi, I just bought a new Toshiba Satellite A300 243 and I decided to reinstall system to Vista Ultimate 64 bit (because of the 4GB ram usage).
It took me a few hours, but in the end I found all needed drivers and everything is working fine, except one thing - those multimedia keys (I think they're called Easy Keys). Start, Stop, Next track and Preview track works fine, but the first (by default used for toggling illumination) and the second (by default used for starting W Media Player) just don't work. I have installed the latest version of VAP for 64 bit Vista and in Toshiba Button Support I'm not able to change anything. The list, where normally I'm able to choose a key to edit its function, is empty. I found a few similar problems on this forum, but without any useful answer - lookes like the only way is to use the Toshiba Recovery option, and at this point I'm getting to my second problem.
The second problem is in Toshiba Recovery Disc Creator and Toshiba HDD Recovery tool. At first, before I reinstalled Vista to 64 bit version I wanted to create Recovery Disc, but Toshiba Recovery Disc Creator just didn't started. Then I found the HDD Recovery option, and I read, that this tool is placed on a hidden partition, so I thought I will be able to recover the old system with this tool in case of any compication. So I reinstalled the system and wanted to go back to 32 bit, because it looked like its slower and at first I wasn't able to find all necessary drivers. And what a surprise - Recovery tool disappeared!
Now the only thing I'm missing on 64 bit version is those two multimedia keys.
And the last question - is there any chance to get a Recovery Disc with Vista 64 bit?

Hello
As you said for the easy keys or also called illumination buttons you need the Toshiba Value Added Package. The Satellite A300-243 belongs to the PSAG8E series and therefore you can find all drivers and tools on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Before you install the VAP, make sure that all drivers are installed and SP1 for Vista at least. Then you can install it and normally then you can use the FN keys, illumination buttons, etc.
Make also sure that you have installed the newest BIOS for your notebook.
About your problem with the recovery disk creator and HDD recovery option I can only say that these features are only available on the preinstalled Vista version. That means if you upgrade to Vista 64bit you cant use the HDD recovery option anymore and also the recovery disk creator.
So if the recovery disk creator doesnt work you should use the HDD recovery option but this is not stored on a hidden partition. These files are stored on the second partition of HDD in the folder HDDrecovery. The hidden partition that you mean belongs is a Vista feature: http://en.wikipedia.org/wiki/Windows_Recovery_Environment
But just one question: Did you already create a recovery disk?
Greets

Limited connectivity with LAN cable & WLan after Win and IE7 update

Dear all,
It's been now 2 days i'm trying to fix a new bug on my Satellite P100. I don't know if it's linked but yesterday I got the automatic install of IE7 and KB (914440 and 915865).
And since the restart of my computer i can't connect to the network neither through the ethernet cable or the wifi one. The network is present but the computer never gets an IP from my router and the dhcp. I have another computer running fine on this router.
When I use configfree util, and try a repair I have a freeze.
I have now unsinstall IE7 and the two KB, zonealarm. But still no changes, i always get this limiting or not existing connectivity.
Do you have any ideas on what I could test ?
Thanks you very much in advance
Phil

Hi
Hmm. Did you try to reinstall the LAN and WLan drivers???
I found some nice advices in the internet It seems that some MS updates could have a bad influence on some drivers or change the registry entries and therefore some system troubles could appear.
What Lan card did you use?? Intel?? On the Toshiba driver page I found tosh lan driver and intel lan driver so if you use a Intel card you could also check the Intel website for an update..

Satellite L50Dt-A: WLan drops out or shows "limited" connection

My wireless internet connection is was fine until last week - now it regularly drops out or shows "limited" connection.
Other computers including an ipad and printer are on the same connection but are not experiencing the same problems as my new Toshiba
Can anyone assist please?

Hi
What windows system do you have?
Did you update the system probably from Win 8 to Win 8.1?
Did you try to update the Wlan driver?
If not do that!
Mostly such symptoms could be solved by new WLan driver reinstallation or update.

Cannot connect to wireless on Satellite L300D-13S

Bought this new laptop Satellite L300D-13S
The wireless doesn't seem to work, the switch and light are on and the divice manger shows theres nothing wrong with the driver my hub seems to be working fine with my older laptop etc so i think my hubs ok. Is this a commen problem?
Its a BT home Hub if that helps and if i use the cable from the hub to the laptop it works fine and conects up with out a problem, please help

Hello,
To connect your notebook to the router wirelessly should not be big problem. The principle on all Toshiba notebooks is the same.
At first be sure the WLAN card is installed properly. The status can be checked in device manager.
Be sure the WLAN card is also enabled properly Move the WLAN switch to ON position (WLAN LED must be ON). After doing this use FN+F8 key combination and be sure option ON is chosen.
So now the WLAN card should be enabled properly.
Click on START > Connect To and Connect to a network window will be shown. On the right side click on refresh button and hopefully available WLANs will be listed. If your favourite WLAN is listed there click on it and then on Connect button. On the next step enter WLAN key (if the network is encrypted) and you should have connect to the router.
If the WLAN is not visible then it can be because of false settings on the router. If your router is not so old check WLAN settings there and enable automatic mode (data transfer speed). Maybe your old notebook has WLAN card A/B and new one runs on G (54 MBit/s transfer speed). Be sure this mode is enabled too.

Satellite L300D will not recognize USB Disc unless WLAN is disabled

I have a venerable Satellite L300D running Vista SP2. I also have a Fujitsu 40Gb SATA disk drive from my old laptop in a USB 2.0 caddy, with dual USB plugs to draw more current.
I can connect the USB caddy successfully to my Windows 7 laptop through a single USB plug on a USB 2.0 socket so I know it works.
On the Satellite L300D it sets up the Generic USB disc in device manager, but does not register the 2 disk partitions as filestore in Windows Explorer. In fact when you try and expand COMPUTER in explorer it times out.
I noticed that the WLAN (Realtek TL8187B) is on the same USB 2.0 Controller, so I disabled it. This switched off my Wireless, but immediately Windows Explorer fired into life and I could access the partitions (D: and G:) and could even run check disk (no fails) and defragment it. As soon as I ENABLE the WLAN driver the disc fails to register.
I have updated the Realtek drivers from the Toshiba web site, but I would like a solution that allows me to use the disc AND the WLAN at the same time.
Anyone any ideas?

Thanks for getting back to me.
I use both USB drives and a Toshiba external HDD and SyncToy to backup my files - both without trouble. The Toshiba HDDworks fine today - in Device Manager it is recognised as "TOSHIBA External USB 3.0 USB Device" (even though I dont have USB 3.0 ports on my laptop) and is recognised by Partition manager as disc D:. The Disc caddy is recognised as "Generic USB Disk USB Device" - but not by Partition Manager - both use the same driver and hang off the same controller. The Caddy disc works fine on my other laptop (Windows 7) and once I've disabled the WLAN.
I had not done any specific driver downloads other than let Windows Update do its thing. It has taken me to Vista SP2 and I note that the "Standard Enhanced PCI to USB Host Controller" (above the USB Root Hub and USB Mass Storage Device in the Device Mgr hierarchy) are at File Version: 6.0.6002.18465(vistasp2_gdr.110505-037).
Since I noticed the recognition problems and interaction with WLAN, I have done some attempted repairs (1) downloaded the latest Toshiba realtek WLAN drivers "6.1162.0610 built by : Win DDK" (realtek_wlan_20100225.zip) - but it was failing before then. (2) I have also upgraded the BIOS to version 1.80. (3) The only other change I've made is to change the driver on the PCI bus from AMD (3GIO) Filter Driver to PCI Bus on advice from another forum.
When you say "remove the WLAN driver, reinstall the chipset driver and install the WLAN driver again" what exactly do you mean? EG in deveice manager - select WLAN - do uninstall ; what do you mean by chipset? - uninstall the Controller as well or some other device?
RgdsColin

Satellite L300D-243 and WLAN - limited connectivity

Similar Messages

Maybe you are looking for