Satellite L775D-S7222 clock will not keep correct time

When I turn on/leave my computer on my time will change anywhere from 5 minutes to about 5 days ahead. It happens everytime I use my computer. I change the time constantly and also have tried changing time zones and changing the websites in which the time can be synced from. Its a small problem but it is very aggravating! I've heard that this could be a hardware problem, but hopefully that is not the case!

Try DFU mode and then restore to factory settings/new iPod. Not from backup
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If you still then have the problem yo have a hardware problem
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

Satellite A105-S4211 Will not keep correct Time

I have a Satellite A105-S4211 running Windows XP SP2. A few months back, it stopped keeping the correct system time. I suspected it was the CMOS battery. How do I replace the battery? Can it be replaced?

Try DFU mode and then restore to factory settings/new iPod. Not from backup
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If you still then have the problem yo have a hardware problem
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Satellite L775D (Windows 7) Will not boot

The message "Windows has encountered a problem with a device connected to your computer"
Status: 0xc00000e9

Having Googled what an ISO file..
Sorry about that. It's very hard for us to guess the computer knowledge of the people we help.
Burn a CD or DVD from an ISO file
-Jerry

Nano 6th gen. will not keep accurate time.

Every time I turn it on the time is wrong and the second hand is stuck.

The audio system in some cars is apparently not compatible with the touch devices. I am not sure why. My Honda won't accept my 1G iPod Touch, but does accept the new nano (fortunately, because as tiny as it is, that's all it is useful for to me).

Prime Optical Server not keeping correct time.

OK this is an issue that I have been having since we loaded Optical Prime 9.3.1. I thought it might have been solved in OP 9.6, it hasn't. We are running both on two separate Red Hat 5.8 servers that are spot on to the NTP server we have. The NTP is tied to a GPS Strat 1 source. We have tried every setting we can think of. It's not a small drift either. Current time on both RH servers is 1956 UTC. the 9.3.1 OP says 0207 UTC tomorrow, and the 9.6 OP server shows 0443 UTC tomorrow. It is frustrating to my Techs and me. I have told them to use the NE alarm time on the screen for tracking tickets.
I need help. it is causing problems with data collection and analysis. things I can do in CPO I have to collect from 117 different NE's.
Thanks for any suggestions,
Steve

try tp cheack nymber of ntp procceses and leave only one like in example:
[root@CPO ~]# ps -ef | grep -v grep | grep "ntp" | wc -l
2
[root@CPOn ~]# ps -ef | grep -v grep | grep "ntp"
ntp 2040 1 0 Jan23 ? 00:00:01 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g
root 2051 2040 0 Jan23 ? 00:00:01 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g
Stop CPO - opticalctl stop
[root@CPO ~]# kill -9 2051
[root@CPO ~]# ps -ef | grep -v grep | grep "ntp"
ntp 2040 1 0 Jan23 ? 00:00:01 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g
[root@CPO ~]# ps -ef | grep -v grep | grep "ntp" | wc -l
1
Cheack command "prefer" after IP of NTP server in /etc/ntp.config file.
Start CPO - opticalctl start

Ever since the update to the IOS7 my ipod will not keep the time. I have reset everything you could reset I have even reset it back to factory settings. I have tried setting the time and date to automatic and manual multiple times but nothing is working.

Please help!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My clock in the menu bar will not keep time.

My clock in the menu bar will not keep time.
However, if I click on it and open Date & Time and do nothing more, it adjusts to the current time but still doesn't work as the seconds aren't advancing. I close Date & Time but the clock stays highlighted/selectted, which is also strange.
Any suggestions as to how to get my clock running again?

Hi Peter,
Not certain, but I'd try this...
You've probably got a couple of corrupt preference files.
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/<yourname>/Library/Preferences/ com.apple.systemuiserver.plist
/Users/<yourname>/Library/Preferences/ByHost/com.apple.systemuiserver.xxx.plist
where 'xxx' is a 12 digit (hexadecimal) numeric string.
This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).
reboot

Windowed CLOCK does not update correctly

My floating desktop clock [digital with date] is one hour earlier than it should be and will not update correctly on startup. The time shown is correct if I switch to the menubar version, as is the time in the time update slot on the Time & Date tab in Preferences. But the analog clock below the time update slot shows one hour earlier also. Am not sure how long this has been a problem since I haven't traveled to a different timezone in two months. At this stage in the lifecycle of Tiger, these kinds of petty annoyances should NOT be occurring as new issues.
14" iBook G4 Mac OS X (10.4.6) 768-Mb RAM

klimew,
Welcome to Apple Discussions.
Go to System Preferences>International>Formats>Times
and explore the Customize...features.
Since you are new to Apple Discussions, you may not
have noticed that there is a Tiger Forum. If my
suggestion is unproductive, you may want to repost
your question in the Tiger Forums: Finder, Dock & Dashboard.
;~)
Thanks for the info but the answer does not lie in International. It's a bug in my clock and apparently only for EDT for some cities, like New York NY (my closest city for the summer). When I switch to Ottawa Canada IN THE SAME TIME ZONE everything is OK. Weirdski.
14" iBook G4 Mac OS X (10.4.6) 768-Mb RAM

Computer clock will not auto update

My clock will not update time. Keeps losing time daily. I can go in and it updates but not automatically.
Is there a setting I am missing?
Thanks for help.
grntech

Back up all data.
If you're running "iStat Menus," disable or remove it, then log out and log back in. Otherwise continue as below.
Triple-click the line below on this page to select it:
~/Library/Preferences/com.apple.systemuiserver.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Move the selected file to the Desktop, leaving the window open. Log out, log back in, and test. If there's no change, put the file you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the file you moved. You may need to recreate some of your settings for optional menu-bar items.

Driver up dates Satellite L775D-S7222!

Hi I need some advise. I have two free programs telling me My AMD driver needs up dating. But when I use device manager to up date; after up dating AMD with either program, it finds and installs a different version??? The reason for this message is after up dating the AMD driver with Slim Driver, I started to get a error in my reliability history. I have very little knowledge about these things and I'm confused. I'm going to attach some screen shots and hope some one here can tell me what's going on.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture48.JPG ‏170 KB
Capture49.JPG ‏104 KB
Capture50.JPG ‏111 KB
Capture51.JPG ‏207 KB

Hi CB! Thanks for your reply. My main goal was to show what part Reliability History played in this. I agree with you about not fixing some thing that isn't broke. I like to try different things; learn from them, and pass it forward. I always have a back up plan that I can revert back to. Also both these programs have a feature to roll back the driver just like the option in Device Manager has. I hope you looked at my screen shots!!
http://technet.microsoft.com/en-us/library/cc749583%28v=ws.10%29.aspx
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Satellite L775D-S7222 standby modes stalls the computer

sometimes trying to put the laptop in standby mode FN+F3 stalls the laptop. the screen goes blank and nothing else works, the only option is to hard reset . when this happens most lights stays on and even after removing the power cord the power on light stays lit.
update to the latest BIOS , still the same.

Satellite L775D-S7222
it is a month old laptop. I called them up, their response was to send the laptop back
It's usually suggested that you restore the hard disk to its original out-of-the-box contents using Toshiba recovery media.
That tells you if there's a software problem.
I believe this could be windows 7 issue. have a friend who has Dell and has similar problems .
Not much of a sample size.
On July 12, 2011, the sales figure was refined to over 400 million end-user licenses and business installations.
-Jerry

My Satellite A25-S279 (WinXP) will not connect to the internet wirelessly since UVerse was installed

My Satellite A25-S279 (WinXP) will not connect to the internet wirelessly since UVerse was installed. (Rather, I should say
it 'connects', then immediately disconnects.) When I had regular DSL, there was no problem, but since UVerse installation,
I can connect ONLY with the ethernet cable.
Thinking it was my 'old' computer, I took it to the local computer place---they were able to connect instantly (wirelessly) AND maintain connection. Sooo...I've told this to ATT, & had 2 different techs out here, both of whom were very patient & tried EVERYTHING they could think of, & both of whom failed to fix the problem. They maintain that it is NOT the fault of the modem/router, but is some 'miscommunication' between my laptop & the modem/router.
Is that possible? Is there a setting I need to change on the laptop? If it worked BEFORE UVerse, and if it STILL works at the Computer store, and if it works WITH the cable, why won't it connect wirelessly?
Thank you SO much for any thoughts!

It is possible. While it's not common, sometimes you could have a working router and a working wireless card in a laptop, but they just don't communicate. It sounds like that might be the problem unfortunately.
- Peter

Adobe Illustrator file will not display correctly when logged in as a user

I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

Components will not resize correctly in Catalyst

Download PSD: http://dl.dropbox.com/u/814249/campusariel.psd
Download FXP: http://dl.dropbox.com/u/814249/campusariel.fxp
I am completely new to Flash Catalyst (any and all versions). I am currently using Photoshop CS5.5 to design and Catalyst 5.5 to import and translate into a flash project. I recently picked up a job creating an interactive application for a college campus. I have attached my two project files for anyone who can help to view to see what is wrong. I have also attached inline screenies for those who cannot/will not download.
Here is my problem: I created the attached PSD in Photoshop with what I thought were the correct layers and groups/folders. I am hoping to achieve the following effect: when a user rolls over the purple buttons, multiple similar copies of that button that are initially hidden beneath the visible one popup in sequence above the rolled over purple button.
Ex. State 1:
Animation/Action Sequence to the following:
The purple popup objects will have their own text content and will be buttons themselves that a user clicks to change to a different state with more specific information.
Not only am I unsure of how to create such animation/action sequence, my purple components (whether I actually convert them to components in Catalyst or not) will not resize correctly. NOTE: I did click the resizable option when importing the PSD into Catalyst. The following effect occurs both ways. I add constraints to all objects by selecting all, right clicking, and choosing add constraints to all; the following occurs when stretched inwards using the resize test handle:
and this when stretched out:
When viewed using CTRL+Enter, the application is nowhere near resized in the browser window. I must be missing something, especially being new to Catalyst. I tried flattening the image in Photoshop, which obviously allowed the image to be easily resizable in Catalyst and the test browser window. However, I cannot use my separate elements when flattened; flattening defeats the purpose of Catalyst if I'm not mistaken.
Any guidance?
Message was edited by: joshlev

Hi Martin - Those are really good questions! I did check and the image is uploaded. I assume I can see the image in my one browser because of the cache since I could not see it on several computers that I had never pulled the site up on before.
And actually I have it working now. Nancy had a good idea to check to see if I saved it as CMYK instead of RGB. When I went to go open the file on my computer Photoshop and Fireworks had an error in opening it. They had a problem opening the one I downloaded from the ftp too. It just looks like somehow the file became corrupted! Not sure how, but that seems like what the problem was since I have a new image up there now and it's working fine again.
Thanks for all your help!
Liz

HT1349 itune will not install correctly on my PC Error message reads "service 'apple mobile device' failed to start

itune will not install correctly on my PC Error message reads "service 'apple mobile device' failed to start

Hello cynthialane,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best of luck,
Mario

Satellite L775D-S7222 clock will not keep correct time

Similar Messages

Maybe you are looking for