Satellite L850 running Win 8 - Cannot get BT working

Hi,
just bought a new Satellite L850 running windows 8,
Can not get Bluetooth working.
I have downloaded Bluetooth driver and BT stack, driver seems to install ok but still no Bluetooth anywhere too be seen. The BT Stack for Toshiba tells me that it will not work with my operating system.
Can not find a download of BT stack for windows 8.
need help with this one
Thanks

According notebook specification your notebook has BT but originally it was delivered with Win7 so I presume with Win7 there is no problem.
Ive also checked support for your notebook model and obviously it is not supported for Win8 and drivers are not listed for this machine.
Have you used Win8 drivers offered for other models?
Maybe stupid comment now but I recommend you to stay with Win7.

Similar Messages

Satellite Pro A200 PSAE1E: Cannot get hotkeys working on Win XP

Hi,
I have a Satellite Pro A200 PSAE1E which came with Vista on it, I have reinstalled it with Win XP Pro installed the relevant drivers from the Toshiba download page but cannot get the hot keys working.
I have installed the controls and control driver but this does not seem to work. Have seen a posting about 'common module' somewhere but can't seem to find any links to download it on the download page.
Can anybody help?
Many thanks
Iain

The Controls utility and the Controls driver allow you to customize and preset TOSHIBA special button settings. But these are not a FN keys!!!
You need to install the Hotkey Utility if you want to use the FN keys.
Further hint:
Its important that all Toshiba drivers and Utilities are installed in the right order.
On the Toshiba driver page you will find a txt file called installation instruction.
Please install all the drivers and tools in the order mentioned in this instruction!
Greetings

Question: I cannot start my iPhone 4. It just "died". I connected it ti my Mac, but tha Mac doesn´t recognise it. Any ideas how to wake the phone.The battery is fine, I just cannot get it working!

Question: I cannot start my iPhone 4. It just "died". I connected it ti my Mac, but tha Mac doesn´t recognise it. Any ideas how to wake the phone.The battery is fine, I just cannot get it working!

See Here for
Frozen or unresponsive iPhone
Try this first... You will not lose any Data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
If that does not work... try letting the battery fully drain.
Then Charge for an Hour and try the suggestions again.

Have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lis

have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lists be printed

Hello, Edward and thank you for your note.
I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
Regards,
Mike

HP Photosmart C4580 Wireless - cannot get to work

I just had to get a new computer and new printer. While I was at it, I established a wireless network. I am running Windows Vista 64-bit on the new computer (Gateway) and have an HP Photosmart C4580 printer with wireless capabilities. I cannot get the printer to work consistently. Everytime I reinstall it, it works fine until either it or the computer goes to sleep or shuts down. Then it doesn't work anymore. Reinstall...it works...sleep, it stops working...vicious cycle.
I have spent HOURS with HP Chat trying to fix this, and even more time trying to find a solution myself. This is my first HP product and I must say that I'm about at my wit's end with it. I find it hard to believe that I am the only one on earth with a similar problem, yet I can find no help anywhere. I'm sure that I'm doing something wrong, but I don't have enough experience to figure it out and cannot seem to find anyone who does.
I would appreciate any help I can get at this point. This is my last resort before I give up and go back to Dell!!!
This question was solved.
View Solution.

I have a couple of questions and some suggestions:
Is the IP address of the printer, the computer or both changing over time?
I recommend setting a DHCP reservation for the computer and the printer. Log on to your wireless-router, look for LAN setup, address reservation. You should see a list of clients connected to the wireless-router. Set reservations for at least the printer and the computer.
Uninstall the SW (sorry about this) and reinstall.
With the IP address of the computer and the printer now fixed, the SW shouldn't have any trouble finding the printer when it wakes from sleep (I hope).
BTW -- unless you're using a very inexpensive surge protector, the printer should be fine connected to it. I think the advice to plug the printer directly into the wall as a way to fix SW problems is quite interesting.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Cannot get sound working on vectra vl400

Hi all
I got a old vectra vl400 with no hard drive. I install a hard drive and I am running OS windows xp pro. I got the drivers for the chipset but ran in to problems with the sound drivers I cound not find any drivers for XP for the on-board sound. So I disable this in setup and installed a cheap pci sound card but again I cannot get this to work. If anyone has any ideas please let me know.
regards stephen

Well, it's a laptop, so they're build in. But to be sure I tested in Win8 (it's a dualboot) and there it works.
$ pactl list sinks short
0 alsa_output.pci-0000_00_03.0.hdmi-stereo module-alsa-card.c s16le 2ch 44100Hz IDLE
1 alsa_output.pci-0000_00_1b.0.analog-stereo module-alsa-card.c s16le 2ch 44100Hz IDLE
edit: sorry, pasted the wrong lines first.
$ pactl list sources short
0 alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
1 alsa_output.pci-0000_00_1b.0.analog-stereo.monitor module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
Last edited by mke21 (2015-01-18 21:16:16)

Messages (that came w Moutain Lion) will not deliver my messages anymore - cannot get it work. Anyone else having this issue?

Messages (the old iChat) was working great when I first downladed Mountain Lion. Since a few days ago, I cannot get messages to send any messages on my MacBook Pro and it won't send some messages on my iPhone (some work, some don't). I have tried quitting the program and restarting it, I have tried restarting the computer. I've gone into preferences and cannot find anything in there to change or fix...I'm at a loss as to why this is happening. Anyone w/ any ideas or help would be greatly appreciated!!

My problem is somewhat similar. I just replaced my iMac with a Retina MBP, and mostly everything migrated (except for a couple apps like XCode) and it's running fine, pretty much identical to the iMac. Messages was working fine on iMac (both have Mountain Lion latest update), and I'm getting all my messages fine on the RMBP, but every message I send errors out and resending errors out, haven't been able to get one delivered since I switched.
Is there any way to debug what is causing the time out error? I'm logged into my accounts properly, have restarted messages several times, turned off the original iMac in case of error, etc.
Edit: But I didn't reboot my RMBP, and of course, guess what? That fixed it. '
My guess is that because I had the iMac still running on the same network as sort of a twin to the new computer, it might have caused some sort of confusion that wasn't worked out until I restarted fresh with the iMac off. You would think that would only cause problems with recieving, not sending, but that's my theory.

APEX Oracle 11g HTTP Server - Cannot get SSL working

I have installed APEX on Oracle 11g with the Oracle HTTP Server on MS Windows server.
Data base up and running, APEX up an running.
All works as expected on port 7777
When I try 4443 I get error message re self signed certificate by Oracle, but if I click through error message I get an https connection.
I want to replace default cert with a locally signed cert, and get SSL working on 4443, then switch to port 443.
I have used the Oracle Wallet manager, generated a CSR, had this signed by my corproate CA, and installed the corporate CA cert and the newly signed server cert into the wallet (with Auto Login Set) and saved it in:
D:\orahttp\Oracle_WT1\instances\apex\config\OHS\ohs1\keystores\infosec2wallet
This creates two files: ewallet.p12 and cwallet.sso
I then manually add the group/users "SYSTEM" and "Administrators" to these two files to match the security tab on the default wallet.
I T then go to the ssl.conf file located at:
D:\orahttp\Oracle_WT\instances\apex\config\OHS\ohs1\ssl.conf
and changed the entry:
#SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/default"
SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/infosec2wallet"
I then stop and start the Oracle HTTP Server - ohs1 from the start menu.
Then I try to connect from my desk top machine using the following URL:
https://us-pghinfosec2.ariba.com:4443/pls/apex/f?p=101:1:
I get the clasic MS IE Message:
==========
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Diagnose Connection Problems
More information
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.
For offline users
You can still view subscribed feeds and some recently viewed webpages.
To view subscribed feeds
Click the Favorites Center button , click Feeds, and then click the feed you want to view.
To view recently visited webpages (might not work on all pages)
Click Tools , and then click Work Offline.
Click the Favorites Center button , click History, and then click the page you want to view.
==========
I am at a loss as to what to do. It acts like Oracle HTTP can not open my wallet.
I suspect it needs the password to the wallet but I cannot find any place to specify the password, and Auto Login should have addressed that issue.
Any insights welcome.
Thanks - Elton Hay

Hello Lakshmi,
>
I got your point but in our case HTTP Server and Oracle Database (APEX) running on different machines.
Oracle HTTP Server running on a Windows 2003 server and Oracle Database running on Sun Solaris machine.
So do i need to change Oracle 10g HTTP Server? do i need to install Oracle 11g HTTP SErver?
Please let me know if my question is not clear.
>
<ul><li>
I got your point but in our case HTTP Server and Oracle Database (APEX) running on different machines.Did I missed something?
You should have mentioned this additional information in the original question itself.
</li>
<li>Oracle HTTP Server running on a Windows 2003 server and Oracle Database running on Sun Solaris machine.As long as [url http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/otn_install.htm#BHAFJJDA]dads.conf is configured correctly there should not be a problem with this.
From Original question:
We are having Oracle APEX 3.1 version on Oracle 10g Database and Oracle 10g HTTP Server as web server in our organization.How did this setup of APEX worked?(i.e. on different machines)
If you still have doubt about this you can do the setup and find out before upgrading.
</li>
<li>So do i need to change Oracle 10g HTTP Server? do i need to install Oracle 11g HTTP SErver?This question is answered in the above post. As long as you fulfill the [url http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/pre_require.htm#CFHIIJBE]HTTP Server Requirements for APEX 4.2 (Also we are discussing this long about only Oracle 10g HTTP Server but which version?)
</li></ul>
Hope now I am more clear!
Regards,
Kiran

Cannot get Ethernet work on my MBP991

hi:
Sorry, I created this new topic since I still could not find any relevant solutions to my problem that I cannot get my Ethernet connection work on my Mac Book Pro 991 which was bought a month a ago, after searching for a couple of similar discussion. None of them seemed working for me. My problem is when I plug a Ethernet cable ( Cat-5) to the port, I cannot see it ever becomes active ,just keeping inactive for the Link status (showing " Cable Unplugged") from either "ifconfig en0" or "Network" preference dialog. I've done the following trials :
1. delete "SystemConfigurations" and restore the default ones. Not work
2. set the service order ,put Ethernet to the first while turning off Airport .not work
3. manually set Ethernet to "10base" "100base" and "1000base" to see if it works from one of them. not work
Since the router is within the neighbors' room , I cannot see if the led is light in the router for the port connecting the cable ,but I'm sure the cable works just fine with my another PC. And I checked kernel log and system log, no foundings. Because I'm current in the trip ,I might turn to Apple Store for more support ,but I'd like to know what might be the cause for such problem ,driver issue?
Btw, I'm running on OS X 10.6.1 ,with no issue found in latest Apple Hardware Test and I'm not doing PMU/PRAM reset since I feel that should not work as well.
Nevo

Try a new cable.

Cannot get NDES working on Server 2012 R2 at all.

I absolutely cannot get this to work. I simply cannot figure out what I am either doing wrong or missing.
Neither site works and in the event log I get the following:
The Network Device Enrollment Service cannot retrieve one of its required certificates (0x80070057).
The Network Device Enrollment Service cannot be started (0x80070057).
It seems like I've read every site on this and tried everything but simply cant make it work. Have not tried on 2008 r2. Below is what I have done if someone can help me I would be grateful.
I tried adding more permissions than needed on local machine certs, templates, and domain level as well
Tried the http://support.microsoft.com/kb/2800975 where you move the ExtensionlessUrlHandler-ISAPI-4.0_64bit below
the static file.
I tried using and not using the use local profile in IIS for the SCEP pool
Both the ndesservice acccount and admin account have full control on everything.
I also tried to leave the default settings in the reg for the templates.
This is the NDES log out put when turned on:
========================================================================
402.534.948: Begin: 7/23/2014 4:01 PM 32.507s
402.539.0: taskhost.exe
402.543.0: GMT - 5.00
2005.220.0: certca.dll: 6.3:9600.16384 retail
2005.220.0: certenroll.dll: 6.3:9600.16384 retail
2004.621.0:<2014/7/23, 16:01:32>: 0x80070005 (WIN32: 5 ERROR_ACCESS_DENIED)
2004.642.0:<2014/7/23, 16:01:32>: 0x80070006 (WIN32: 6 ERROR_INVALID_HANDLE)
402.379.949: End: 7/23/2014 4:01 PM 32.585s
402.534.948: Begin: 7/24/2014 2:31 PM 03.904s
402.539.0: taskhost.exe
402.543.0: GMT - 5.00
2005.220.0: certca.dll: 6.3:9600.16384 retail
2005.220.0: certenroll.dll: 6.3:9600.16384 retail
2004.621.0:<2014/7/24, 14:31:3>: 0x80070005 (WIN32: 5 ERROR_ACCESS_DENIED)
2004.642.0:<2014/7/24, 14:31:6>: 0x80070006 (WIN32: 6 ERROR_INVALID_HANDLE)
402.379.949: End: 7/24/2014 2:31 PM 06.122s
EVENT LOG
HTTP Error 500.0 - Internal Server Error
Detailed Error Information:
Module   IsapiModule
Notification   ExecuteRequestHandler
Handler   ISAPI-dll     Error Code   0x80070057
Requested URL
   http://localhost:80/certsrv/mscep_admin/mscep.dll
Physical Path
   C:\Windows\system32\CertSrv\mscep\mscep.dll
Logon Method   Negotiate
Logon User   FARAWAY\NdesService
INSTALL STEPS
SETUP DOMAIN ACCTS:
Created Domain acct ndesservice (added to ndes server admin group and IIS group)
Created Domain acct ndesadmin (added to Enterprise Admins and ndes server admin group)
Ndes Server Profile Added
-Logged on as ndesservice account so profile is created on ndes server
DOMAIN CA (Server 2008 r2)
-Applied kb2483564 to 2008 r2 domain CA
-Duplicated (Exchange Enrollment Agent (Offline request),Cep Encryption,IPSec (Offline request) templates)
Added ndesservice, ndesadmin, and ndes server with read and enroll on all three
-All three cer copies prefixed with ndes
-Issued Certs
-CA properties (added ndesservice account and ndes machine acct read and request)
-Added ndesservice account to local admin group
Set SPN for ndesservice domain account
-setspn –s http/gimli.faraway.com faraway\NdesService)
NDES SERVER (Server 2012 R2)
Installed NDES under CA Role using ndesadmin account (member of enterprrise admins group)
-Added Request Filtering in IIS (tried with adding and without)
-Added .Net extensability options (tried with adding and without)
Post Deployment on NDES Server
-set creds to configure role services to faraway\ndesadmin
-Set service account to faraway\ndesservice
-Set ca to pippin.faraway.com\farway (it picked this up automatically)
-Entered cert info left keys at defualt of 2048
NDES Server Registry changes
-HKLM\Software\Microsoft\Cryptography\MSCEP (changed templates from default of IPSECIntermediateOffline to NDESIPSECIntermediateOffline
also tried the template name NDESIPSec(Offlinerequest) from the copy
-Added faraway\ndesservice account full control of MSCEP and below
-HKLM\Software\Microsoft\Cryptography\MSCEP\EnforcePassword (change from 1 to 0)
Ndes Server IIS applicattion Pool Identity
-IIS SCEP App pool set Load User profile from false to true
NDES Server Certificates
There were two Certs created when the role was installed in the machines personal store. I dont think I am supposed to do anything here other than add permissions?
-Added ndesservice account and machine account with full control
Both the CA and NDES server have been restarted multiple time. Am I doing this right and missing something in IIS 8.5? I Hope I provided enough info.

Learning a lot lol. Never had to do either IIS tracing or capi logging. Turned it on.
This is the log
Level
Date and Time
Event ID
Task Category
Information
7/25/2014 12:25
81
Verify Trust
Information
7/25/2014 12:25
90
X509 Objects
Information
7/25/2014 12:25
30
Verify Chain Policy
Information
7/25/2014 12:25
11
Build Chain
Information
7/25/2014 12:25
41
Verify Revocation
Information
7/25/2014 12:25
40
Verify Revocation
Information
7/25/2014 12:25
41
Verify Revocation
Information
7/25/2014 12:25
51
Retrieve Object from Cache
Information
7/25/2014 12:25
50
Retrieve Object from Cache
Information
7/25/2014 12:25
40
Verify Revocation
Information
7/25/2014 12:25
10
Build Chain
Information
7/25/2014 12:25
80
Verify Trust
Error
7/25/2014 12:24
30
Verify Chain Policy
Error
7/25/2014 12:24
11
Build Chain
Information
7/25/2014 12:24
90
X509 Objects
Information
7/25/2014 12:24
41
Verify Revocation
Information
7/25/2014 12:24
40
Verify Revocation
Error
7/25/2014 12:24
41
Verify Revocation
Error
7/25/2014 12:24
42
Reject Revocation Information
Error
7/25/2014 12:24
42
Reject Revocation Information
Information
7/25/2014 12:24
51
Retrieve Object from Cache
Information
7/25/2014 12:24
50
Retrieve Object from Cache
Information
7/25/2014 12:24
40
Verify Revocation
Information
7/25/2014 12:24
10
Build Chain
Information
7/25/2014 12:24
70
Acquire Certificate Private Key
Information
7/25/2014 12:24
90
X509 Objects
Error
7/25/2014 12:24
30
Verify Chain Policy
Error
7/25/2014 12:24
11
Build Chain
Information
7/25/2014 12:24
90
X509 Objects
Information
7/25/2014 12:24
41
Verify Revocation
Information
7/25/2014 12:24
40
Verify Revocation
Error
7/25/2014 12:24
41
Verify Revocation
Error
7/25/2014 12:24
53
Retrieve Object from Network
Information
7/25/2014 12:24
52
Retrieve Object from Network
Error
7/25/2014 12:24
42
Reject Revocation Information
Information
7/25/2014 12:24
53
Retrieve Object from Network
Information
7/25/2014 12:24
52
Retrieve Object from Network
Error
7/25/2014 12:24
42
Reject Revocation Information
Information
7/25/2014 12:24
51
Retrieve Object from Cache
Information
7/25/2014 12:24
50
Retrieve Object from Cache
Information
7/25/2014 12:24
40
Verify Revocation
Information
7/25/2014 12:24
10
Build Chain
Information
7/25/2014 12:24
70
Acquire Certificate Private Key
Information
7/25/2014 12:24
90
X509 Objects

BCM4318 Cannot get to work on Acer Aspire 5100

Ok so I just installed Arch on my Aspire 5100 and it has a PCI BCM4318 Wireless LAN card. I cannot get it to work or find networks with ndiswrapper or anything. I am using gnome and it keeps telling me I don't have the firmware installed when I followed every possible guide for the card. Also, I can't get any other user accounts I've made to work with startx, and I'm doing a big no no by using starx with root.

You might want to check if you somehow ended up with your files at $HOME being owned by root. This might prevent you from starting X.
As for the wireless driver, I have no idea, sorry.

Satellite L850 PSKACA: Win 8 AMD Catalyst Manager & Control Center instal

Satellite L850 PSKACA-03S011
Hi There
After installing Windows8 pro upgrade I have the following issue and not sure how to fix this
Was said I had to reinstall in windows 8
AMD CATALYST INSTALL MANAGER & ATI CATALYST CONTROL CENTRE
I need the info how to install these drivers AND LINK TO THE CORRECT DRIVERS TO DOWNLOAD
Please if someone can help
Tks Gill

Hmm it seems that just few Win 8 drivers are released for this unit.
Ive got another idea.
Win 8 supports and provides an own repair and fix options.
Here an useful and interesting information:
+Windows 8 Recovery & Repair+
http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
There are different ways to recover or repair a PC which are:
1. Refresh
2. Reset
3. Recovering using a recovery media
4. System Image Recovery
5. System Restore
6. Automatic Repair
7. Command Line
I would recommend trying the first option called *Refresh:*
The "Refresh" option is primarily a repair method. It is a great method of returning your PC to a known good state while preserving your files and a great deal of your configuration. With the "Refresh your PC" option, user accounts, data files, and some settings are preserved on your PC without the need to create a backup, or make choices about what to keep or remove

Problem's with sound driver on Satellite A200 running Win XP SP3

Hi Guys
I recently bought a Satellite A 200 PSAE7. I got it downgraded to Win XP.
Everything worked perfectly until last night. I restarted the laptop and i had no sound. I tried to reinstall the Realtek sound drivers, it succeeds, ask for a restart but the sound is still not working. I tried everything, removing the drivers through add/remove programs, and device manager and then reinstalling it. When i restart it tells me "PCI device detected" after i installed the sound drivers. But the sound doesn't work.
Any advice?

Yes, its possible to remove the installed XP SP3. I did it last time too.
In your case you have to remove the Sp3 firstly to be able to reinstall the mentioned XP patches.
Found some people here how had the same problem unfortunately there is not other solution as to remove the SP3, then to remove the sound card and the high definition devices from the device manager and after the installation of KB888111 and KB835221 you should follow with further installation of sound driver.

Cannot get audio working on Mac Pro in Windows XP

Hey all, I've got a Mac Pro (late 2006, 3GHz), and I'm running Windows XP. Trying to get audio working, installed BootCamp using the Leopard Install DVD, but no dice. No sound at all, not audio devices showing up in Device Manager/Control Panel, you know the usual places.
Ive retried the installer, when it gets to SigmaTel audio drivers it says "An Instance of this installer is already running". I'm assuming that's a bad thing but I don't know how to fix it....

I may have a solution for you.
Install *[_THIS WINDOWS UPDATE_|http://files.filefront.com/kb835221exe/;9494950;/fileinfo.html]* while in windows.
Once you have installed the above update then repair your bootcamp driver by inserting the Leopard disk and choosing repair. This will repair the drivers. Once this is done, you audio should work.
Axel F.

Satellite L450D 11X - How to get WLAN working again?

Hello,
I've recently had problems with my 4 year old L450D 11X machine with everything slowing up.
I seem to have sorted this problem by reinstalling Windows 7.
Now I can only get access to broadband via an Ethernet cable. I've downloaded the Realtek RTL802E/8103 Drivers and run them to see if that will solve the problem, but it didn't work.
I'd be grateful for any suggestions to how I can get the wireless connection back.
Thanks

Thank you for your reply.
I managed to get it working again after downloading a further Realtek Driver which was highlighted as missing in one of the systems files.
I had tried the F8 key before but with no luck.
I had had a problem with the machine for a couple of months and had restored factory settings a couple of times, but it kept slowing up.
So I then got hold of another copy of the Windows 7 and that so far has worked except for the problem with the broadband access.

Satellite L850 running Win 8 - Cannot get BT working

Similar Messages

Maybe you are looking for