Satellite M40-112: DVD writing takes to long

Hallo, my friends, I've a Satellite M40-112 which was bought 4 months before. Now I have problems with my DVD-Ram, the writing of 4xDVD-RW or 4xDVD-R of a volume of 4.3 G normally takes more than 45 minutes, sometimes even one hour. The transfering of data on DVD-RW or DVD-R of the same volume also takes the similar time. Meanwhile, the CPU occupying rate amounts to 100% when writing or reading the DVD-RW/Rs. I've tried the same jobs on my friends Satellite L20 series, the average CPU occupying rate was normally only 10-20%. Could some experts give me your treasurous suggestions or ideas? Thanks in advance.

Hi my friend
It is very strange. A friend of mine has the same unit and we have created a few DVD movies and burning procedure is much faster. I dont know which burning software you use but please check if the option called simulation is activated. If yes disable this.
Bye

Similar Messages

  • DVD Burning takes so long, first time around - why?

    Hi guys,
    I wonder if anyone can help with a query I have please?
    I use an external DVD burner to burn DVD's for a customer each day (http://eshop.macsales.com/item/OWC/MRF82SD22/).
    The interface I'm using on this particular burner, is the FW800 interface, and burn times for the same job, are typically around 7minutes per session.
    However, (and here's the issue) - first thing every morning, or after a long period of inactivity, a burn will take as long a 18 minutes, then come back to the 7 minute burn time over 3 or 4 burns. If I use it constantly, the burn times sit around 7 minutes all day long . . . . but never first time!
    (I noticed too, that the DVD takes a while to mount on the Desktop at times.)
    This happens constantly, and I've been taking note of this phenomenon for over 3 months.
    iMac is about a 18 months old (2.4Ghz Core 2 Duo/2GB Ram)
    OS is 10.6.8 Snow Leopard
    DVD's are DVD-R
    Filetypes being burned are always .MPG.
    If anyone can explain to me why this may be happening, I'd be very grateful.
    Thanks in advance.

    No replies so I would assume no one has or noticed.  The only thing I thought of, but not sure it applies to your case (which is why I didn't reply but I mention it now anyhow) is perhaps a disk image is created the first time before burning it to the dvd and then reused for additional copies.  The fact that you said you do this throughout the day made me think you couldn't be burning the same thing each time so new disk images would have to be created for those new times which throws out that disk image theory.

  • Upgrade from  FCP 6(motion,DVD,etc) to FCP 7 (motion,DVD,etc) takes so long

    I am just wondering why each "content disk" takes along time - I mean at least an hour but it starts the count at 15 - 40 plus hours.... for each disk. Is there something wrong? Or is this everyones experience. Eventually is rackets down but it just seems overly slow....
    Just asking:)
    Thanks!

    It takes a long time to read and write from the DVDs. There is a lot of material to move around and if you do not have a fast DVD reader ...
    One way to speed things up is to create disk images of all the FCS install disks. Mount all the drives to your desktop and the install time should be 30 minutes or so and you won't have to baby sit the process.
    I have mine stored on a portable firewire drive so they don't take up drive space on the computer.
    I'll usually clone my system drive before a major installation/upgrade procedure so that if things go badly I can revert to the old system and be back working with minimal downtime.
    x

  • Windows 8 does not recognize DVD drive on Satellite P775-112 - code 19

    I have a Satellite P775-112 that was previously running Windows 7.
    This weekend I upgraded to Windows 8 Pro RTM.
    Following the upgrade, the DVD drive is no longer recognized.
    In Device Manager the drive "MAT****A BD-MLT UJ240EF" has a warning symbol, and the Device Status in Properties is "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)".
    I've tried everything I've found on the web without success:
    - Reinstall driver (http://technet.microsoft.com/en-US/library/cc772156)
    - Look for and remove UpperFilters / LowerFilters values in the registry (http://support.microsoft.com/kb/314060) : in my case they weren't present
    I also tried connecting a USB DVD drive to my laptop - it failed with the same Device Status in Device Manager. Which suggests the problem isn't specific to my DVD hardware.
    Any suggestions welcome!
    Thanks

    Hi guys
    Found a solution here:
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
    *Uninstall the Toshiba programs:*
    TOSHIBA Recovery Media Creator
    TOSHIBA Disc Creator
    Then restart your PC using the Power-->Restart option in Windows 8.
    Your CD/DVD should be accessible now.
    For help with uninstalling these programs follow the instructions below
    *To Uninstall a program or application:*
    1. At the START screen type Control Panel
    2. Select Programs --> Uninstall a program
    3. Find the two programs listed above and uninstall these applications
    4. After the application programs are uninstalled restart your computer using the Power-->Restart option in Windows 8
    5. When the computer power back on the CD/DVD drive should be available
    If the CD/DVD drive still does not appear follow the instructions below to uninstall a device driver
    *To uninstall a device driver:*
    1. At the START screen type Device Manager
    2. Select Device Manager > DVD/CD-ROM drives > right click on the device displayed > select Uninstall.
    3. After the driver uninstalls, power down you computer using the restart method. The driver will install automatically when the computer restarts.
    4. The CD/DVD drive should now be shown.

  • My mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    OK. If you believe that.
    When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
    I tell you those are the signs of a disk that is about to die.
    Allan

  • Satellite L505D-S5983 DVD Drive no longer works

    Don't know how long ago this problem started, but whenever a cd or dvd is in the drive, the light flashes on and off. If you double click on the dvd drive in windows explorer, it takes a long time trying to read it, then says no dvd/cd in drive. Anyone else have this problem?

    You're welcome - good to hear it's Ok
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Satellite M40-145: CD/DVD drive won't read some DVDs

    Hello!
    I own a Satellite M40-145 purchased just over one year ago; the DVD driver worked perfectly until three days ago, but today I discovered something... peculiar. It still reads commercial DVDs and burned DVD+R, but apparently it doesn't read burned DVD-Rs anymore. I have tried with different DVD-Rs I burned through the same DVD player, with no success; trying to access the DVD yields a "insert disk in D: drive" message.
    In this case, I'm talking about movies on DVDs. Please tell me there's a way to solve this without sending the computer to customer service...
    I'd hate to think it broke down just days after the expiration date of the warranty.

    Hi
    Well, you can try to remove the drive form the device manger.
    After new reboot the drive should be recognized again. Check then if its possible to read the DVD-R CD.
    But the issue sounds as a lens calibration error. If you use different media the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
    Unfortunately, in such cases only the drive replacement will solve this issue.

  • Satellite M40 does not read from product Recovery DVD

    Hey all.
    I have a bit of a problem that I hope someone can help me.
    My Satellite M40 notebook fell while it was in the bag and the dvd drive stopped working .
    I had it repaired and it plays cds but I can't get the recovery disk to work.
    It opens but for some reason the files are unreadable.
    When I try to press C after turning it on, the computer sounds like it is about to work but then the windows XP icon just appears.
    Can anyone help or offer advice? I'd really appreciate

    I just checked my dvd recording device Sonic and it is not there. The read me file and all are there but the actual program I cannot find. So do I need to download that?
    The Sonic and other additional tools are placed only on the Additional Software CD which should be delivered together with the M40.
    >How do I know which firmware is compatible or goes with my dvd drive? How can I check?
    As already said!!! The firmware could be found on the CD/DVD drive manufacturer site!
    I dont know what drive you have bought and I dont know the drive details!

  • New DVD writer on Satellite M40-193 uses 100% CPU

    Hello anyone,
    recently I have replaced my DVD-writer with a new one. My laptop is a Satellite M40-193 (PSM40E-06M026IT) and the original drive is a Mat****a UJ-831B. I have replaced it with a Sony-Nec Optiarc AD-7633A because I like the slot-in feature and the Labelflash feature.
    Unfortunately it makes me a problem. It will use 100% CPU every time I use it. I cannot figure out the problem. Is there anyone who can help me? It is a software problem or hardware?
    Thank you.

    After six days this is the only help I can get on this forum: "...this optical disc drive is compatible with your notebook model?".
    The ATA communication bus is a standard.
    The exsistence of a compatibility list does not means that ONLY those drives present in the list can work with the relative notebook.
    Those drives are the ones tested and the ones that Toshiba says: "this drive surelly work" but not says "this is the only drive that work".
    In fact I have RESOLVED the question with a little software I have found on another forum and now my drive works perfectly and I have a newer and more featured drive than those in the list.
    Thank you Mike

  • IDVD takes to long 47 to 60 hours to burn/make dvd

    I need help, im trying to burn dvd with a iDVD. But it takes to long mote than 49 hours is ridiculous, please help dont know other program to make cools menus as iDVD, or help me how to fix it please... 

    Hi
    There can be may things that do this. Most common are:
    • Use of old Mac - e.g. PowerMac G3 - a DVD was most often a weekend project
    • HARD DISK SPACE - are running LOW.
    - For SD-Video Materiaal (as on old CRT-TVs) - my minimum is 25Gb free space
    - For HD-Material - 4 - 5 times more are a safe low (100 - 150Gb free spave)
    This space iDVD can not use on other external hard disks - it must be on the Boot (Macintosh HD) Hard Disk.
    • Use of Video-Codecs, Photo and Audio file formats that iDVD (and iMovie) has hard to or even can not use.
    I use:
    - Video-Codec: streamingDV, AIC or HDV
    - Photo - only .jpg (no .bmp or other formats - all converted to .jpg - and a reasonable size)
    - Audio - only .aiff 16 bit 48kHz or 44.1kHz (as on Audio-CDs) - NO .mp3 or directly from iTunes  - all converted to this
    • Material used stored so that iDVD (iMovie) has hard to get it - there are no copy in the project all must be easy to find (e.g. slow net-work storage - can give this problem)
    Yours Bengt W

  • Satellite M40: Sonic RecordNow does not recognize Mat****a CD/DVD drive

    Hello,
    I have a satellite M40. The sonic recordnow (version 7.31) software cannot found cd/dvd recorder.
    I check in the support from toshiba and found a new update for Mat****a dvdram UJ 841S. So I downloaded it. But when I run it, an error message appears: "the target drive is not connected". How can I fix it ?
    The thng is my cd/dvd drive is working ok: i can read videos and music cd. I can burn dvd with dvdx soft. Bu I want to fix sonic.
    Thank uou for your help.
    nat

    Hi
    The firmware update will NOT fix the sonic issue!!!
    The firmware has nothing to do with this problem the firmware contains details and further informations about supported and compatible CDs/DVDs.
    I presume some registry keys or sonic files are corrupt and therefore the drive cannot be recognized correctly by Sonic software.
    I would recommend reinstalling the Sonic software!!!
    But why you dont use the Nero burning program? In my opinion its the best burning software. I use it too and Im very happy!!!
    You should try it

  • Satellite M40: Win XP install after system crash- ser.number problem

    Hello there,
    i would like to ask you what shall i do. I bought new toshiba satellite m40 laptop about 5 years ago in London.
    There was no Win XP recovery cd (no recovery partition on hdd as well), just cd with toshiba drivers in the box. Now my system crashed.
    Took me long time to figure out what it was. (BSOD - "not ACPI compliant") I tried almost everything even HDD format.
    Later on i completely dismanteled laptop, cleaned the dust inside and it works again - no BSOD.
    Now i need to install my WinXP back. So i downloaded WinXP service pack 3 cd-rom and tried to install it.
    It wont take my serial number which i have on a sticker on my toshiba.
    Please help me, what shall i do?
    I paid for WinXP (system was included in price) and now i cannot use it.

    Well, i was in London just few months when i bought that laptop. The guy in the store told me the box include everything - it was the way they got it. I didn't know how it works in London (well except the robb of in an exchange office on victoria train station first day and another one paying for a laptop in Computer store which had branches all around London and the company crashed and did not pay me back) and it was my first (delivered) laptop as well. Of course i asked why there is no Win XP cd (or recovery). I used to have many destops before starting with old good 386@20MHz. I was very well aware that i really need installation cd of windows, do remember loads of system crashes of Win95 and Win98. Maybe somebody took it out of the box, who knows. I am just 100% sure it was not there. So i reconciled myself with it, was a newbee there, didn't want to make problems. My fault. Another one was not buying recovery program (or use of that toshiba recovery creator) to make image of hdd. Those days imaging system was quite a new thing as well-at least for me. Few days ago I tried toshiba support web to find recovery cd, even e-bay, etc. to find and buy it. No chance. I can try to call Toshiba UK support centre, but i guess it will be the same answer.
    You wrote your friend has got one as well, is it the type -225 ? Full name of it is: Toshiba satellite m40 -225. Different number means different hardware, but recovery cd of your friend might be compatible. Would it be possible to ask him to give/sale me an image of that disk? Toshiba support in my country cannot provide help or further info, is not comparable with the UK or US one. But thank you guys for answering me anyway! :-) Any idea welcomed.
    EDIT: BSOD (not ACPI compliant) is unfortunatelly back, laptop works just in really cold (-10 C) environment. Restoration CD would be logical step to go.

  • Satellite M40-237: CD Boot not working + is USB flash drive boot possible

    *Model: Satellite M40-237 (PSM40E)*
    I decided to reinstall windows, my hard drive is currently formatted. So as usual, boot from Windows CD is needed to start instalation but it simply won't boot. I never had problems like this, boot always worked. It is like there is no bootable CD in the drive (but it is bootable and it is working on another PC).
    - i have the latest BIOS
    - BIOS detects optical drive and everything is ok, HDD is primary ODD is secondary
    - i tried selecting boot priority with F12 and/or setting it from BIOS, but it won't work either way
    What could be the problem here? Drive not working properly (i hope it is that and not something worse)? I had some problems with the drive i before (writing...), but it reads CD/DVD's normally and like i said boot was working fine before. I cleaned the lens a little, disconected it and put it back. Is there anything more i can do ?
    I am trying to find someone who has the drive that fits so i can try with that one, but who knows when will that be.
    Now, here is the second question i have related to this. Because my laptop is practically useless currently (i can't install anything), is it possible to boot from:
    a) external USB optical drive
    b) USB flash drive
    Bios on this laptop has no USB boot option, it has HDD / CD / FDD / network. But I've red somewhere that FDD = USB if legacy emulation is enabled.
    If that is correct i should just plug the USB drive and select FDD as boot option ? If i can't find USB optical drive, i was thinking of making USB bootable flash disk and copying windows xp installation on it. So once it boots into DOS i just start setup from the stick.
    tnx

    First of all I have to say that the booting from USB flash memory (USB stick) is not possible and you shouldnt waste the time trying this.
    Regarding your CD/DVD drive booting issue
    Well, its really strange it sounds a little bit like a kind of master/slave/c-sel settings issue. But usually you should get a IDE (#0 or #1) error if one of the devices (HDD or ODD) would be not recognized ?:|
    The whole story sounds mysteriously
    Maybe there is a firmware issue
    Several months ago a friend of mine was not able to boot from the CD.
    He entered the BIOS and set the BIOS back to the default settings.
    This helped
    This is a suggestion but I really dont know if it helps.

  • [Solved] Shutdown/Reboot takes a long time

    I do an upgrade every 5 days or so but it's been a while since I last rebooted--probably around 15-24 days. Since I haven't shutdown/rebooted for a while, I decided to do one today. I noticed that shutdown/reboot takes a long time, around 2-3 minutes whereas before, it would be instant and the behavior seems weird. Upon pressing shutdown or reboot:
    1. Monitors become completely black and searches for a signal (by switching HDMI, DVI, etc). PC still on
    2. After 1 minute, if reboot, I can hear the GPU fans spin like crazy. Shutdown doesn't do this, just quiet.
    3. After waiting another minute, some output shows up really fast and the PC is rebooted or shutdown
    This didn't happen before so I think it's probable that one of the updates did this. Unfortunately, I'm not sure how to tell which one.
    I followed the section "Diagnosing Shutdown Problems" here on how to debug shutdown problems. I've got the systemd shutdown log but I can't tell where the problem is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bea34fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bea35000-0x00000000bea7dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bea7e000-0x00000000bea85fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bea86000-0x00000000bf5f9fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fa000-0x00000000bf5fbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fc000-0x00000000bf60bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf60c000-0x00000000bf615fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf616000-0x00000000bf63afff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf63b000-0x00000000bf67dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf67e000-0x00000000bf7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: MSI MS-7673/P67A-G43 (MS-7673), BIOS V1.11 04/14/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 3 base 23F800000 mask FFF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fce60-0x000fce6f] mapped at [ffff8800000fce60]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23f600000-0x23f7fffff]
    [ 0.000000] [mem 0x23f600000-0x23f7fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f5fffff]
    [ 0.000000] [mem 0x220000000-0x23f5fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbea34fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbe9fffff] page 2M
    [ 0.000000] [mem 0xbea00000-0xbea34fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] [mem 0xbf5fa000-0xbf5fbfff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] [mem 0xbf67e000-0xbf7fffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 0x00000000BEA7E068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000BEA85148 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000BEA7E150 006FF4 (v02 ALASKA A M I 00000015 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x00000000BF60DF80 000040
    [ 0.000000] ACPI: APIC 0x00000000BEA85240 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000BEA852B8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
    [ 0.000000] ACPI: MCFG 0x00000000BEA853C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000BEA85400 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
    [ 0.000000] ACPI: ASF! 0x00000000BEA85438 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23f7f5000-0x23f7f8fff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023edfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbea34fff]
    [ 0.000000] node 0: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] node 0: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f7fffff]
    [ 0.000000] On node 0 totalpages: 2089813
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12143 pages used for memmap
    [ 0.000000] DMA32 zone: 777145 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20448 pages used for memmap
    [ 0.000000] Normal zone: 1308672 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea35000-0xbea7dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea7e000-0xbea85fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea86000-0xbf5f9fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf5fc000-0xbf60bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf60c000-0xbf615fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf616000-0xbf63afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf63b000-0xbf67dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f400000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2057137
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8146392K/8359252K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 212860K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 3299.649 MHz processor
    [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6601.26 BogoMIPS (lpj=10998830)
    [ 0.000022] pid_max: default: 32768 minimum: 301
    [ 0.000025] ACPI: Core revision 20141107
    [ 0.002006] ACPI: All ACPI Tables successfully acquired
    [ 0.229873] Security Framework initialized
    [ 0.229877] Yama: becoming mindful.
    [ 0.230159] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.231159] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.231602] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231738] Initializing cgroup subsys memory
    [ 0.231741] Initializing cgroup subsys devices
    [ 0.231743] Initializing cgroup subsys freezer
    [ 0.231744] Initializing cgroup subsys net_cls
    [ 0.231745] Initializing cgroup subsys blkio
    [ 0.231759] CPU: Physical Processor ID: 0
    [ 0.231759] CPU: Processor Core ID: 0
    [ 0.231762] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.231764] mce: CPU supports 9 MCE banks
    [ 0.231772] CPU0: Thermal monitoring enabled (TM1)
    [ 0.231778] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.231839] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.232422] ftrace: allocating 21171 entries in 83 pages
    [ 0.238717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.271684] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.271688] TSC deadline timer enabled
    [ 0.271700] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.271711] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.271712] ... version: 3
    [ 0.271712] ... bit width: 48
    [ 0.271713] ... generic registers: 8
    [ 0.271714] ... value mask: 0000ffffffffffff
    [ 0.271714] ... max period: 0000ffffffffffff
    [ 0.271715] ... fixed-purpose events: 3
    [ 0.271715] ... event mask: 00000007000000ff
    [ 0.291699] x86: Booting SMP configuration:
    [ 0.291700] .... node #0, CPUs: #1
    [ 0.304842] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.305029] #2 #3
    [ 0.334799] x86: Booted up 1 node, 4 CPUs
    [ 0.334802] smpboot: Total of 4 processors activated (26407.07 BogoMIPS)
    [ 0.336656] devtmpfs: initialized
    [ 0.338107] PM: Registering ACPI NVS region [mem 0xbea35000-0xbea7dfff] (299008 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf60c000-0xbf615fff] (40960 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf63b000-0xbf67dfff] (274432 bytes)
    [ 0.338196] pinctrl core: initialized pinctrl subsystem
    [ 0.338227] RTC time: 18:49:17, date: 04/22/15
    [ 0.338286] NET: Registered protocol family 16
    [ 0.349856] cpuidle: using governor ladder
    [ 0.363177] cpuidle: using governor menu
    [ 0.363192] ACPI: bus type PCI registered
    [ 0.363193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.363233] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.363234] PCI: not using MMCONFIG
    [ 0.363235] PCI: Using configuration type 1 for base access
    [ 0.376685] ACPI: Added _OSI(Module Device)
    [ 0.376686] ACPI: Added _OSI(Processor Device)
    [ 0.376687] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.376688] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.377668] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.378832] ACPI: Dynamic OEM Table Load:
    [ 0.378835] ACPI: SSDT 0xFFFF880235BFDE40 000084 (v01 AMI CST 00000001 MSFT 03000001)
    [ 0.379146] ACPI: Interpreter enabled
    [ 0.379150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.379156] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.379157] ACPI: Using IOAPIC for interrupt routing
    [ 0.379168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.379198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.379380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.379496] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.381659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.381662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.381725] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
    [ 0.381755] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
    [ 0.381757] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
    [ 0.381758] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
    [ 0.381759] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
    [ 0.381932] PCI host bridge to bus 0000:00
    [ 0.381934] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.381935] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.381937] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.381938] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.381939] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.381940] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.381945] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
    [ 0.381993] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    [ 0.382014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.382032] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.382079] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.382098] pci 0000:00:16.0: reg 0x10: [mem 0xfe708000-0xfe70800f 64bit]
    [ 0.382164] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.382218] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.382235] pci 0000:00:1a.0: reg 0x10: [mem 0xfe707000-0xfe7073ff]
    [ 0.382315] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.382339] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.382365] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.382378] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
    [ 0.382443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.382493] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.382628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.382664] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.382689] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
    [ 0.382761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.382787] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.382810] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
    [ 0.382882] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.382908] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.382932] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
    [ 0.383004] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 0.383029] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 0.383056] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.383074] pci 0000:00:1d.0: reg 0x10: [mem 0xfe706000-0xfe7063ff]
    [ 0.383154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.383181] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.383206] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
    [ 0.383340] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
    [ 0.383355] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
    [ 0.383361] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
    [ 0.383366] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
    [ 0.383372] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
    [ 0.383378] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
    [ 0.383384] pci 0000:00:1f.2: reg 0x24: [mem 0xfe705000-0xfe7057ff]
    [ 0.383422] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.383461] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.383473] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit]
    [ 0.383490] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    [ 0.383561] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
    [ 0.383571] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.383579] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
    [ 0.383584] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
    [ 0.383593] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
    [ 0.383621] pci 0000:01:00.0: supports D1 D2
    [ 0.383650] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
    [ 0.383660] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
    [ 0.383708] pci 0000:01:00.1: supports D1 D2
    [ 0.389829] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.389830] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.389832] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.389833] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.389906] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.389985] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
    [ 0.390139] pci 0000:03:00.0: supports D1 D2
    [ 0.390140] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.396493] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
    [ 0.396501] pci 0000:00:1c.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.396502] pci 0000:00:1c.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.396503] pci 0000:00:1c.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.396504] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.396505] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.396506] pci 0000:00:1c.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.396507] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.396651] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.396745] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
    [ 0.396772] pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
    [ 0.396910] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.403155] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.403160] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.403227] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.403248] pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.403279] pci 0000:06:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.403298] pci 0000:06:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.403403] pci 0000:06:00.0: supports D1 D2
    [ 0.403404] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.409816] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.409819] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.409826] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.410049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.410074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.410098] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.410122] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.410146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.410218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.410250] ACPI: Enabled 3 GPEs in block 00 to 3F
    [ 0.410300] vgaarb: setting as boot device: PCI:0000:01:00.0
    [ 0.410301] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.410302] vgaarb: loaded
    [ 0.410303] vgaarb: bridge control possible 0000:01:00.0
    [ 0.410339] PCI: Using ACPI for IRQ routing
    [ 0.415815] PCI: pci_cache_line_size set to 64 bytes
    [ 0.415855] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.415856] e820: reserve RAM buffer [mem 0xbea35000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf5fc000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
    [ 0.415858] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
    [ 0.415918] NetLabel: Initializing
    [ 0.415919] NetLabel: domain hash size = 128
    [ 0.415919] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.415927] NetLabel: unlabeled traffic allowed by default
    [ 0.415940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.415942] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.417956] Switched to clocksource hpet
    [ 0.420722] pnp: PnP ACPI init
    [ 0.420798] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
    [ 0.420799] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.420800] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.420801] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.420802] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [ 0.420804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.420902] system 00:01: [io 0x0a00-0x0a0f] has been reserved
    [ 0.420903] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.420993] pnp 00:02: [dma 0 disabled]
    [ 0.421016] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.421032] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.421058] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.421059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421149] system 00:05: [io 0x0400-0x0453] could not be reserved
    [ 0.421150] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.421151] system 00:05: [io 0x1180-0x119f] has been reserved
    [ 0.421152] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.421153] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.421154] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
    [ 0.421155] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.421157] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.421158] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.421187] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.421188] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.421295] pnp: PnP ACPI: found 7 devices
    [ 0.427004] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.427006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.427007] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.427009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427011] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.427026] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.427044] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
    [ 0.427053] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.427056] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.427063] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.427064] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.427070] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427075] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.427076] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427077] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.427077] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.427078] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427079] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427080] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427081] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.427082] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
    [ 0.427083] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427084] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
    [ 0.427085] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427086] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
    [ 0.427087] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
    [ 0.427087] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427088] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427089] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427090] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
    [ 0.427091] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
    [ 0.427092] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427107] NET: Registered protocol family 2
    [ 0.427218] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.427305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.427411] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.427422] TCP: reno registered
    [ 0.427428] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427446] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427479] NET: Registered protocol family 1
    [ 0.427627] pci 0000:01:00.0: Video device with shadowed ROM
    [ 0.427703] PCI: CLS 64 bytes, default 64
    [ 0.427731] Unpacking initramfs...
    [ 0.458276] Freeing initrd memory: 3368K (ffff88003795c000 - ffff880037ca6000)
    [ 0.458282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.458284] software IO TLB [mem 0xbaa35000-0xbea35000] (64MB) mapped at [ffff8800baa35000-ffff8800bea34fff]
    [ 0.458388] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.458447] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458451] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458455] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458459] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458489] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.458503] Scanning for low memory corruption every 60 seconds
    [ 0.458643] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.458653] Initialise system trusted keyring
    [ 0.458879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.459596] zpool: loaded
    [ 0.459598] zbud: loaded
    [ 0.459684] VFS: Disk quotas dquot_6.5.2
    [ 0.459702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.459788] Key type big_key registered
    [ 0.459886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.459910] io scheduler noop registered
    [ 0.459911] io scheduler deadline registered
    [ 0.459926] io scheduler cfq registered (default)
    [ 0.460230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.460238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.460245] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
    [ 0.460245] vesafb: scrolling: redraw
    [ 0.460246] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.460257] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
    [ 0.507010] Console: switching to colour frame buffer device 175x65
    [ 0.553487] fb0: VESA VGA frame buffer device
    [ 0.553501] intel_idle: MWAIT substates: 0x1120
    [ 0.553502] intel_idle: v0.4 model 0x2A
    [ 0.553502] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.553594] GHES: HEST is not enabled!
    [ 0.553630] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.574150] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.574369] Linux agpgart interface v0.103
    [ 0.574402] rtc_cmos 00:03: RTC can wake from S4
    [ 0.574506] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.574530] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.574537] Intel P-state driver initializing.
    [ 0.574635] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.575069] TCP: cubic registered
    [ 0.575206] NET: Registered protocol family 10
    [ 0.575527] NET: Registered protocol family 17
    [ 0.576245] Loading compiled-in X.509 certificates
    [ 0.576267] registered taskstats version 1
    [ 0.577040] Magic number: 11:338:848
    [ 0.577156] rtc_cmos 00:03: setting system clock to 2015-04-22 18:49:17 UTC (1429728557)
    [ 0.577255] PM: Hibernation image not present or could not be loaded.
    [ 0.577672] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 0.577674] Write protecting the kernel read-only data: 8192k
    [ 0.578177] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 0.578369] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 0.586926] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.594161] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.594538] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.594602] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.596674] ACPI: bus type USB registered
    [ 0.596690] usbcore: registered new interface driver usbfs
    [ 0.596697] usbcore: registered new interface driver hub
    [ 0.596714] usbcore: registered new device driver usb
    [ 0.596929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.597010] ehci-pci: EHCI PCI platform driver
    [ 0.597090] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.597095] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.597107] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.598329] SCSI subsystem initialized
    [ 0.600997] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.601009] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe707000
    [ 0.601141] libata version 3.00 loaded.
    [ 0.607823] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.607929] hub 1-0:1.0: USB hub found
    [ 0.607934] hub 1-0:1.0: 2 ports detected
    [ 0.608004] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608009] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
    [ 0.608319] hub 2-0:1.0: USB hub found
    [ 0.608327] hub 2-0:1.0: 2 ports detected
    [ 0.608382] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608384] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
    [ 0.608386] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.608389] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 0.608405] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.611688] hub 3-0:1.0: USB hub found
    [ 0.611696] hub 3-0:1.0: 2 ports detected
    [ 0.612303] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.612313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000
    [ 0.621118] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.621236] hub 4-0:1.0: USB hub found
    [ 0.621248] hub 4-0:1.0: 2 ports detected
    [ 0.621321] ahci 0000:00:1f.2: version 3.0
    [ 0.634481] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
    [ 0.634487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    [ 0.668448] scsi host0: ahci
    [ 0.668750] scsi host1: ahci
    [ 0.669100] scsi host2: ahci
    [ 0.669412] scsi host3: ahci
    [ 0.669697] scsi host4: ahci
    [ 0.669967] scsi host5: ahci
    [ 0.670051] ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 30
    [ 0.670054] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 30
    [ 0.670057] ata3: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705200 irq 30
    [ 0.670059] ata4: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705280 irq 30
    [ 0.670061] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 30
    [ 0.670064] ata6: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705380 irq 30
    [ 0.914200] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.927545] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 0.987472] ata5: SATA link down (SStatus 0 SControl 300)
    [ 0.987497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987521] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 0.987543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987563] ata6: SATA link down (SStatus 0 SControl 300)
    [ 0.987584] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 0.987877] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.988115] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S243D, SB00, max UDMA/100
    [ 0.988210] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988214] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
    [ 0.988217] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.988682] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988746] ata1.00: configured for UDMA/133
    [ 0.988881] ata3.00: configured for UDMA/100
    [ 0.989027] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
    [ 0.989649] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
    [ 0.989653] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.990752] ata2.00: disabling queued TRIM support
    [ 0.990755] ata2.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
    [ 0.990757] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.992466] ata4.00: configured for UDMA/133
    [ 0.994299] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.997177] ata2.00: disabling queued TRIM support
    [ 1.000401] ata2.00: configured for UDMA/133
    [ 1.000669] scsi 1:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
    [ 1.001813] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S243D SB00 PQ: 0 ANSI: 5
    [ 1.011521] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
    [ 1.015296] ata1.00: Enabling discard_zeroes_data
    [ 1.015310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.015364] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.015367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.015385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015513] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
    [ 1.015517] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.015524] ata1.00: Enabling discard_zeroes_data
    [ 1.015532] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.015618] sd 3:0:0:0: [sdc] Write Protect is off
    [ 1.015621] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.015636] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.015641] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.015657] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015779] sda: sda1 sda2
    [ 1.016099] ata1.00: Enabling discard_zeroes_data
    [ 1.016176] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.016225] sdb: sdb1
    [ 1.016696] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.022237] sdc: sdc1 sdc2
    [ 1.022726] sd 3:0:0:0: [sdc] Attached SCSI disk
    [ 1.025940] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.025945] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.026137] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.038098] hub 1-1:1.0: USB hub found
    [ 1.038285] hub 1-1:1.0: 6 ports detected
    [ 1.051455] hub 4-1:1.0: USB hub found
    [ 1.051648] hub 4-1:1.0: 8 ports detected
    [ 1.298000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.303924] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
    [ 1.317239] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
    [ 1.443336] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.443537] systemd[1]: Detected architecture 'x86-64'.
    [ 1.443740] systemd[1]: Set hostname to <arch>.
    [ 1.460317] tsc: Refined TSC clocksource calibration: 3300.020 MHz
    [ 1.473794] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
    [ 1.497743] systemd[1]: Unit type .busname is not supported on this system.
    [ 1.537625] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.537643] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.537662] systemd[1]: Reached target Remote File Systems.
    [ 1.537672] systemd[1]: Starting Remote File Systems.
    [ 1.537692] systemd[1]: Reached target Encrypted Volumes.
    [ 1.537701] systemd[1]: Starting Encrypted Volumes.
    [ 1.537748] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.537759] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.537800] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.537810] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.538002] systemd[1]: Created slice Root Slice.
    [ 1.538014] systemd[1]: Starting Root Slice.
    [ 1.538060] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.538070] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.538120] systemd[1]: Listening on Journal Socket.
    [ 1.538134] systemd[1]: Starting Journal Socket.
    [ 1.538265] systemd[1]: Created slice User and Session Slice.
    [ 1.538276] systemd[1]: Starting User and Session Slice.
    [ 1.545589] systemd[1]: Listening on Journal Audit Socket.
    [ 1.545747] systemd[1]: Created slice System Slice.
    [ 1.545765] systemd[1]: Starting System Slice.
    [ 1.546248] systemd[1]: Mounting Huge Pages File System...
    [ 1.546789] systemd[1]: Mounting Debug File System...
    [ 1.546970] systemd[1]: Created slice system-dhcpcd.slice.
    [ 1.546987] systemd[1]: Starting system-dhcpcd.slice.
    [ 1.547561] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 1.548678] systemd[1]: Starting Setup Virtual Console...
    [ 1.549285] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.550613] systemd[1]: Starting Load Kernel Modules...
    [ 1.550645] systemd[1]: Started File System Check on Root Device.
    [ 1.551159] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 1.551679] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.551836] systemd[1]: Created slice system-getty.slice.
    [ 1.551850] systemd[1]: Starting system-getty.slice.
    [ 1.551870] systemd[1]: Reached target Slices.
    [ 1.551883] systemd[1]: Starting Slices.
    [ 1.551931] systemd[1]: Listening on udev Kernel Socket.
    [ 1.551941] systemd[1]: Starting udev Kernel Socket.
    [ 1.551986] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 1.551997] systemd[1]: Starting Journal Socket (/dev/log).
    [ 1.552492] systemd[1]: Starting Journal Service...
    [ 1.552545] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.552561] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.552600] systemd[1]: Listening on udev Control Socket.
    [ 1.552611] systemd[1]: Starting udev Control Socket.
    [ 1.552659] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.552669] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.552689] systemd[1]: Reached target Login Prompts.
    [ 1.552701] systemd[1]: Starting Login Prompts.
    [ 1.553185] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.553231] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.553249] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.554439] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    [ 1.555736] systemd[1]: Mounting Temporary Directory...
    [ 1.556329] systemd[1]: Mounted POSIX Message Queue File System.
    [ 1.556363] systemd[1]: Mounted Huge Pages File System.
    [ 1.556388] systemd[1]: Mounted Debug File System.
    [ 1.556779] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 1.557030] systemd[1]: Started Setup Virtual Console.
    [ 1.557256] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 1.557431] systemd[1]: Mounted Temporary Directory.
    [ 1.558591] hub 1-1.5:1.0: USB hub found
    [ 1.558901] hub 1-1.5:1.0: 4 ports detected
    [ 1.560366] vboxdrv: Found 4 processor cores.
    [ 1.561065] vboxdrv: fAsync=0 offMin=0x2ca offMax=0x6c0c
    [ 1.561137] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 1.561139] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
    [ 1.561712] systemd[1]: Started Load Kernel Modules.
    [ 1.568012] systemd-journald[149]: Failed to set file attributes: Inappropriate ioctl for device
    [ 1.569830] systemd[1]: Started udev Coldplug all Devices.
    [ 1.575918] systemd[1]: Mounted FUSE Control File System.
    [ 1.576374] systemd[1]: Mounting Configuration File System...
    [ 1.576805] systemd[1]: Starting Apply Kernel Variables...
    [ 1.576856] systemd[1]: Started Rebuild Dynamic Linker Cache.
    [ 1.582712] systemd[1]: Started Rebuild Hardware Database.
    [ 1.582739] systemd[1]: Started First Boot Wizard.
    [ 1.582757] systemd[1]: Started Create System Users.
    [ 1.583212] systemd[1]: Starting Load/Save Random Seed...
    [ 1.583784] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 1.584599] systemd[1]: Mounted Configuration File System.
    [ 1.587256] systemd[1]: Started Load/Save Random Seed.
    [ 1.589801] systemd[1]: Started Apply Kernel Variables.
    [ 1.607967] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 1.608452] systemd[1]: Starting udev Kernel Device Manager...
    [ 1.608476] systemd[1]: Reached target Local File Systems (Pre).
    [ 1.608492] systemd[1]: Starting Local File Systems (Pre).
    [ 1.626961] usb 1-1.6: new low-speed USB device number 5 using ehci-pci
    [ 1.637443] systemd[1]: Started udev Kernel Device Manager.
    [ 1.649393] systemd[1]: Started Journal Service.
    [ 1.653641] systemd-journald[149]: Received request to flush runtime journal from PID 1
    [ 1.813303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 1.813310] ACPI: Power Button [PWRB]
    [ 1.813368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 1.813371] ACPI: Power Button [PWRF]
    [ 1.817850] wmi: Mapper loaded
    [ 1.855141] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.872038] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 1.872046] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 1.877249] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 8c:89:a5:16:c4:7d, XID 0c900800 IRQ 32
    [ 1.877252] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 1.880259] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
    [ 1.907839] [drm] Initialized drm 1.1.0 20060810
    [ 1.910066] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 1.911296] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.912890] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 1.913064] fuse init (API version 7.23)
    [ 1.914070] usblp 1-1.4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x024A
    [ 1.914093] usbcore: registered new interface driver usblp
    [ 1.916048] AVX version of gcm_enc/dec engaged.
    [ 1.916050] AES CTR mode by8 optimization enabled
    [ 1.924639] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
    [ 1.925198] usbcore: registered new interface driver usbhid
    [ 1.925200] usbhid: USB HID core driver
    [ 1.926129] sound hdaudioC0D1: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
    [ 1.926132] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.926133] sound hdaudioC0D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 1.926134] sound hdaudioC0D1: mono: mono_out=0x0
    [ 1.926136] sound hdaudioC0D1: dig-out=0x11/0x1e
    [ 1.926137] sound hdaudioC0D1: inputs:
    [ 1.926139] sound hdaudioC0D1: Front Mic=0x19
    [ 1.926140] sound hdaudioC0D1: Rear Mic=0x18
    [ 1.926142] sound hdaudioC0D1: Line=0x1a
    [ 1.934672] iTCO_vendor_support: vendor-support=0
    [ 1.934826] [drm] radeon kernel modesetting enabled.
    [ 1.935110] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.935141] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 1.935229] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.939587] r8169 0000:06:00.0 enp6s0: renamed from eth0
    [ 1.939661] gpio_ich: GPIO from 436 to 511 on gpio_ich
    [ 1.941371] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
    [ 1.941824] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 1.941825] AMD IOMMUv2 functionality not available on this system
    [ 1.943447] CRAT table not found
    [ 1.943449] Finished initializing topology ret=0
    [ 1.943479] kfd kfd: Initialized module
    [ 1.943669] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
    [ 1.943670] fb: switching to radeondrmfb from VESA VGA
    [ 1.943685] Console: switching to colour dummy device 80x25
    [ 1.943797] random: nonblocking pool is initialized
    [ 1.943880] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1787:0x2307).
    [ 1.943890] [drm] register mmio base: 0xFE620000
    [ 1.943891] [drm] register mmio size: 131072
    [ 1.943923] ATOM BIOS: CAYMAN
    [ 1.943974] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
    [ 1.943975] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
    [ 1.943977] [drm] Detected VRAM RAM=2048M, BAR=256M
    [ 1.943977] [drm] RAM width 256bits DDR
    [ 1.944037] [TTM] Zone kernel: Available graphics memory: 4075924 kiB
    [ 1.944038] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 1.944039] [TTM] Initializing pool allocator
    [ 1.944043] [TTM] Initializing DMA pool allocator
    [ 1.944058] [drm] radeon: 2048M of VRAM memory ready
    [ 1.944059] [drm] radeon: 1024M of GTT memory ready.
    [ 1.944068] [drm] Loading CAYMAN Microcode
    [ 1.946470] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.946562] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.946609] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.946674] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 1.946720] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 1.946769] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.946769] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 1.946809] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 1.946849] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 1.951281] [drm] Internal thermal controller with fan control
    [ 1.955166] [drm] radeon: dpm initialized
    [ 1.955974] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 1.956619] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:04CA:005B.0004/input/input15
    [ 1.957600] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
    [ 1.957733] intel_rapl: Found RAPL domain package
    [ 1.957736] intel_rapl: Found RAPL domain core
    [ 1.978933] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 1.979020] radeon 0000:01:00.0: WB enabled
    [ 1.979022] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880234d8bc00
    [ 1.979798] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 1.979800] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880234d8bc04
    [ 1.979801] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880234d8bc08
    [ 1.979802] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880234d8bc0c
    [ 1.979804] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880234d8bc10
    [ 1.979805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.979806] [drm] Driver supports precise vblank timestamp query.
    [ 1.979807] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
    [ 1.979844] radeon 0000:01:00.0: radeon: using MSI.
    [ 1.980067] [drm] radeon: irq initialized.
    [ 1.998991] [drm] ring test on 0 succeeded in 2 usecs
    [ 1.998999] [drm] ring test on 3 succeeded in 4 usecs
    [ 1.999006] [drm] ring test on 4 succeeded in 4 usecs
    [ 2.010399] hid-generic 0003:04CA:005B.0004: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input0
    [ 2.012308] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:005B.0005/input/input16
    [ 2.069928] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:1028.0006/input/input17
    [ 2.080530] Adding 4194300k swap on /mnt/LinuxStorage/swap. Priority:-1 extents:4 across:4464636k FS
    [ 2.116506] hid-generic 0003:04CA:005B.0005: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input1
    [ 2.116542] logitech-hidpp-device 0003:046D:1028.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.2:1
    [ 2.118008] mousedev: PS/2 mouse device common for all mice
    [ 2.175912] [drm] ring test on 5 succeeded in 2 usecs
    [ 2.175917] [drm] UVD initialized successfully.
    [ 2.176481] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 2.176922] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 2.177365] [drm] ib test on ring 4 succeeded in 0 usecs
    [ 2.328709] [drm] ib test on ring 5 succeeded
    [ 2.329264] [drm] Radeon Display Connectors
    [ 2.329265] [drm] Connector 0:
    [ 2.329266] [drm] DP-1
    [ 2.329267] [drm] HPD5
    [ 2.329268] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 2.329268] [drm] Encoders:
    [ 2.329269] [drm] DFP1: INTERNAL_UNIPHY2
    [ 2.329269] [drm] Connector 1:
    [ 2.329270] [drm] DP-2
    [ 2.329270] [drm] HPD4
    [ 2.329271] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 2.329271] [drm] Encoders:
    [ 2.329272] [drm] DFP2: INTERNAL_UNIPHY2
    [ 2.329272] [drm] Connector 2:
    [ 2.329273] [drm] HDMI-A-1
    [ 2.329273] [drm] HPD6
    [ 2.329274] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 2.329274] [drm] Encoders:
    [ 2.329275] [drm] DFP3: INTERNAL_UNIPHY1
    [ 2.329275] [drm] Connector 3:
    [ 2.329276] [drm] DVI-D-1
    [ 2.329276] [drm] HPD1
    [ 2.329277] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 2.329277] [drm] Encoders:
    [ 2.329278] [drm] DFP4: INTERNAL_UNIPHY1
    [ 2.329278] [drm] Connector 4:
    [ 2.329279] [drm] DVI-I-1
    [ 2.329279] [drm] HPD3
    [ 2.329280] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 2.329280] [drm] Encoders:
    [ 2.329281] [drm] DFP5: INTERNAL_UNIPHY
    [ 2.329282] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 2.408814] [drm] fb mappable at 0xC0475000
    [ 2.408816] [drm] vram apper at 0xC0000000
    [ 2.408816] [drm] size 8294400
    [ 2.408817] [drm] fb depth is 24
    [ 2.408818] [drm] pitch is 7680
    [ 2.408899] fbcon: radeondrmfb (fb0) is primary device
    [ 2.435470] Console: switching to colour frame buffer device 240x67
    [ 2.438497] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 2.438498] radeon 0000:01:00.0: registered panic notifier
    [ 2.449565] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
    [ 2.459456] Switched to clocksource tsc
    [ 2.490495] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.687833] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687846] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687870] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
    [ 20.764979] r8169 0000:06:00.0 enp6s0: link up
    [ 20.764992] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
    [ 256.173829] device-mapper: uevent: version 1.0.3
    [ 256.173991] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
    [ 256.713510] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 256.718933] JFS: nTxBlock = 8192, nTxLock = 65536
    [ 256.730155] ntfs: driver 2.1.31 [Flags: R/W MODULE].
    [ 256.800019] raid6: sse2x1 7801 MB/s
    [ 256.856622] raid6: sse2x2 11630 MB/s
    [ 256.913233] raid6: sse2x4 15648 MB/s
    [ 256.913234] raid6: using algorithm sse2x4 (15648 MB/s)
    [ 256.913235] raid6: using ssse3x2 recovery algorithm
    [ 256.913829] xor: automatically using best checksumming function:
    [ 256.946535] avx : 32756.400 MB/sec
    [ 256.954986] Btrfs loaded
    [ 603.210136] watchdog watchdog0: watchdog did not stop!
    [ 603.211033] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
    [ 603.244960] systemd-journald[149]: Received SIGTERM from PID 1 (systemd-shutdow).
    [ 603.321496] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
    [ 603.325328] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0
    [ 603.325462] systemd-shutdown[1]: Unmounting file systems.
    [ 603.393079] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402416] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402433] systemd-shutdown[1]: All filesystems unmounted.
    [ 603.402438] systemd-shutdown[1]: Deactivating swaps.
    [ 603.402507] systemd-shutdown[1]: All swaps deactivated.
    [ 603.402511] systemd-shutdown[1]: Detaching loop devices.
    [ 603.403097] systemd-shutdown[1]: All loop devices detached.
    [ 603.403101] systemd-shutdown[1]: Detaching DM devices.
    [ 603.403156] systemd-shutdown[1]: All DM devices detached.
    [ 603.412388] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    Would appreciate some input regarding this. Thanks!
    EDIT: This is on gnome 3.16. Not sure if that matters.
    Last edited by devrepublic (2015-05-13 03:24:19)

    ksu wrote:Thanks alot for the input guys. Since I want to start from scratch anyways I'll definitively dig deeper into the subject. BTRFS snapshot feature and RAID1 by simply mirroring two partitions sound awesome, and the subvolume feature seems to be exactly what I need for my USB setup, giving me alot of flexibility. But if there are really that many reports of random data loss then I'll also do some research into that direction to see what this is all about. I admit I'm a linux noob, but it's a lot of fun to learn all this stuff.
    Be sure to read this: https://btrfs.wiki.kernel.org/index.php/Gotchas
    From my own experience, I can say that:
    1. I've never had an issue nor data loss with BTRFS RAID1 root partition on a single disk (other than the first issue on the above list).
    2. I had recurring problems with BTRFS RAID1 non-root partition on a single disk not being able to mount (had to reboot random number of times to get it to mount). However, I suspect this was caused not just by BTRFS but the combination of BTRFS+LVM+dmcrypt which is a rather complex and unusual setup. I had somewhat similar issue with ZFS.
    3. I had BTRFS checkdisk report strange, non-critical, unfixable errors on my non-raid BTRFS root partition, but it never corrupted or lost any data. I simply copied the data to another partition, recreated the root partition and all was fine again.
    4. The last time I lost data on a single partition because of BTRFS was 17 months ago. The last time BTRFS snapshot saved me from losing data was yesterday.
    5. I migrated from BTRFS to ZFS for my backup server and will possibly do so for my work machines. ZFS is more elegant, mature and I have seen no complaints of losing data because of it. However, ZFS is complicated and somewhat restrictive to setup for a data partition, and many times more difficult to setup as root partition. I would not consider it for a non-permanent USB installation.
    6. What we committed here is a massive thread hijacking.
    Last edited by Lockheed (2015-04-24 05:27:51)

  • Satellite M40-256 - error while booting via CD

    Hello,
    a well-known friend owns Satellite M40-256 which has Windows problem (error while updating/handling by her children).
    She doesn't own an external Toshiba FDD or ODD. Also this portable has no built-in FDD. Buying one only for this issue? NO
    The boot priority has been changed to: CD-network-HDD.
    I've tried another non Toshiba branded ODD (in BIOS not mentioned/found)
    The original ODD works/boots in another pc (via adapter) very great.
    Ive tried several CD/DVDs to boot from (no error displayed): instant-Linux like knoppix, suse, other windows CDs, recovery CD, ... no success
    Every time the same result: the laptop has a black screen, the ODD speeds up and after about 3 to 5 seconds windows starts with the black-white progress bar.
    I also tried to press C to force booting from CD.
    Some time ago, I had only access to windows in secured mode. But after uninstalling some updates it ends in a licence problem. This issue can be only solved by booting windows-cd via cd.
    It has a Toshiba bios 1.00 (interesting, seems quite old).
    I've trying at the moment to boot via network. Does the Toshiba show some messages about succeeding/failing at boot via network or CD?
    Has setting the execution bit an influence on behaviour?
    Does anybody know a solution booting windows?
    Thanks in advance

    Thanks for help.
    I will look for an other ODD from Toshiba trying for boot.
    Does the toshiba bios show messages about booting via cd or network? Even choosing network ends in a faulty Windows boot.
    After choosing an item there's no message while booting
    As I mentioned: the most interesting issue is ODD works/boots well via adapter in a normal pc and also after windows has been started (secured mode). But no boot possible.
    I suspect meanwhile BIOS or Mainboard. But is there a chance for update in secured mode? (the only thing it starts is "secured with prompt"). Cats bites itself in tail.
    BIOS also was saved with default setup. Nothing changed.
    In event viewer I've found entry about probs with hard-drive and controller.
    Does a destructive data processing influence the toshiba bios

Maybe you are looking for