SAVED REPORT NAME TO BE DISPLAYED IN COLUMN

I have arequirement to display the name of the report in the column , however @{savedreport} does not workwhen refered to in the column.
How can I fetch out the name of the saved request

I want to writeback Column2 along with the report name in the database , what should I doWell then, its simple just hardcode the report name as I have said in one of the column and using writeback. As you are storing column 2 value in DB similarly create another column in database with datatype as varchar2 and point the column node in the writeback XML. like
UPDATE tablename SET col2 = @c{1},NAME = '@{c2}' where col1 = @c{0}
Hope this is clear
Edited by: Deepak Gupta on 01-Sep-2011 00:00

Similar Messages

Substitution string used in custom Report column name does not display in PDF version of report

I am using Apex 4.2.6.00.03, Apex Listener 2 via Glassfish4 and have set up all my applications and reports on this system. We previously used Oracle 10.2, with Apache with a custom fopping document.
My issue is that I have a report that has custom column headings using a substitution string to pull in the begin or end date for the report. When the report is run and displayed, the column headings appropriately display the date. However, when I try to set up the Print to PDF option, the column headings are not displaying correctly.
Is it possible to use a substitution string in the column heading? I am able to use the substitution string in the Page Header and Page Footer and those display correctly.
In the Report Attributes setup I have set the "Strip HTML" to Yes and I have four columns that are using the &"ITEM NAME". string. See below for actual display:
The report column headings in APEX displays correctly (bold is the substitution detail):
Fund Account Description Balance 07/01/2014 Budget/Goal FY 14-15 YTD Actual 02/28/2015 Ending Balance 02/28/2015
In the Print Attributes setup, when I get to the Report Columns section, the Heading column displays the headings as set up in the Report Attributes custom and I am not able to edit these names. See below:
In the version of the report that is Printed to PDF I get the following for display:
Fund Account Description Balance %26amp;P347_BEGIN_DATE. Budget/Goal %26amp;P347_FY. YTD Actual %26amp;P347_END_DATE. Ending Balance %26amp;P347_END_DATE.
Any assistance would be greatly appreciated.
Thanks,
Pat

First, the misspelled word is a test object and not data.
Second, all data display correctly.
Third, text object is displaying the old misspelled word.
Fourth, I have eliminated the possibility that problems in of my pdf export routine cause this issue by exporting directly from Crystal Reports Viewer. I print the report to the crystal report viewer. The report looks good. The text object is spelled correctly. Then I click the Crystal Reports viewer's export button in the left upper corner and I export to both EXCEL and PDF. The excel export looks good. The pdf export is misspelled. All the export occurs internally in Crystal reports.
Fifth, I found outthat all users who have this problem have the ADOBE PDF writer installed. I am just suspicious that ADOBE writer is interferring with Crystal export
Sixth, I cannot recreate this problem on any of our development and test machines. It only happens on end-user laptops.
Seventh, I changed the name of the report that had this problem and created a new version and installed on end-user laptop. The behaviour still persists. User saved the report as both RPT and PDF. RPT export looks good. PDF version has the spelling problem. Data on both reports is up-to-date and good. I copied the same RPT export to my PC and exported it to PDF, the pdf looks good. That is why I think something on the end-users laptops is causing the export to use some cached template.
One more thing I did was to change the report name in VB.NET project, recreated a new package and installed on end-user's laptop. The same exact problem is still there.
I have worked with Crystal Reports more than 15 years and I have never such a weird behaviour before. I know this sounds very weird. We are all baffled by what is happening.

How can we display the list of Report Names in Dashboard Prompt?

How can we display the list of Report Names in Dashboard Prompt?

Hi,
No its not possible to display list of reports in dashboard prompts.
Can do this using SQl results in prompt(we write query checking out report names manualy),but its not easy thing if you are having many report names to be displayed.
Assign points and close your threads if answered.
Refer : http://forums.oracle.com/forums/ann.jspa?annID=939
Regards,
Srikanth

How to display the column names of a table in the output

Hi,
I want to display the name of the columns of the table without using literals in a abap report.
EX: Consider the table KNA1
KUNNR NAME ADDRESS
I want to display the column names in the above fashion without using hardcoded write statements.
Thanking in anticipation

You can use this FM <b>DDIF_FIELDINFO_GET</b> It gives you all the names related to fields in a table -:)
Greetings,
Blag.

Query Report - To display additional column in list selection box.

Hi,
There is query report where i want to display the additional column in list selection.
Below is the system query report, where parameter passed is card code.
When the cardcode - list selection is clicked system displays 2 columns i.e. Customer Code & No. of Records.
Now in the same list selection; is it possible to display the customer name along with cardcode only for reference.
SELECT T0.DocDate, T1.SlpName, T2.Name, T0.DocDueDate, T0.DocNum, (CASE WHEN T0.DocStatus = 'O' THEN 'Open' ELSE 'Closed' END) AS Status, T0.DocTotal FROM OQUT T0 LEFT JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode LEFT JOIN OCPR T2 ON T0.CntctCode = T2.CntctCode WHERE T0.CardCode = N'[%0]' ORDER BY T0.DocNum DESC
Kindly let me know the details.
Thanks & Regards,
Yogesh Jadav

Hi Yogesh Jadav,
The answer is NO. You may only display either code or name but not both.
Thanks,
Gordon

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

Displaying 2 columns in a single column using HTML section of reports.

Hi Team,
I have a requirement in which we need to display 2 columns in the same column of OBIEE report. At present we have 2 columns as 2 different columns.
For example if i have a column A which is used as @A in html section i need the new column to have @A + @B where B is another column in database.
Can i concatenate 2 columns in a single column ?
Thanks,
Ritesh

first select column 1 and column 2 in criteria.
go to reaults are add narrater view.
in narrater view type.
@1@2[br/]
set number of rows
this should work in narrator.
Edited by: user10615659 on May 20, 2013 4:30 PM

In query, turkish column name is not displayed correctly?

In my characteristic and key figure infoobjects , i used turkish characters for explanation but in Bex they are displayed as illegal characters for column names.
How can i correct this or where would i make a mistake?
Thanks.

Hi Tuncer,
I am dealing with the same problem you had.
Turkish characters in the column names, infocube names are not displayed although in BW turkish characters are displayed properly. Did you solve your problem about Turkish characters in column names.
If you could solve, I would be glad to hear your solution.
Thank you.
Mehmet Cekdemir

My iPhone 4s will not display my saved contact names anymore. What to do?

All of a sudden, my iPhone 4s will not display any of my saved contacts names or pictures. It only shows the number. However, it will show my facebook contacts names and info. I currently have iOS 7.1.1. I I've tried turning my phone off and them back on and still nothing. How do I get it to show my contacts again?

Hi Haleynichole_99!
I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using the Apple Support Communities!
Cheers,
Braden

Displaying the column names in a spreadsheet

Hello All,
I am downloading data from SAP into a spreadsheet using the FM MS_EXCEL_OLE_STANDARD_DAT. The data is coming fine.
But I need to display the column names too in the spreadsheet. Could anyone please tell me how to do that.
Thanks in advance.
Regards
Indrajit

Hi Pawan,
I am using the following piece of code.
TYPES: BEGIN OF ty_fieldname,
                 text(20) TYPE c,
              END OF ty_fieldname.
DATA: gs_fieldname TYPE ty_fieldname.
           gt_fieldname TYPE STANDARD TABLE OF ty_fieldname.
gs_fieldname-text = 'Material'.
APPEND gs_fieldname TO gt_fieldname.
gs_fieldname-text = 'Ad Size'.
APPEND gs_fieldname TO gt_fieldname.
gs_fieldname-text = 'Classification Group'.
APPEND gs_fieldname TO gt_fieldname.
gs_fieldname-text = 'Old Ceiling'.
APPEND gs_fieldname TO gt_fieldname.
gs_fieldname-text = 'Message Type'.
APPEND gs_fieldname TO gt_fieldname.
gs_fieldname-text = 'Message'.
APPEND gs_fieldname TO gt_fieldname.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
      EXPORTING
        file_name                 = p_file
        data_sheet_name           = text-014
      TABLES
        data_tab                  = gt_rate
        fieldnames                = gt_fieldname
      EXCEPTIONS
        file_not_exist            = 1
        filename_expected         = 2
        communication_error       = 3
        ole_object_method_error   = 4
        ole_object_property_error = 5
        invalid_pivot_fields      = 6
        download_problem          = 7
        OTHERS                    = 8.
I am getting a short dump on this which says -
"Only flat, character-type data objects are supported at the argument
position "dest" for the statement
"WRITE src TO dest".
In this case, the operand "dest" has the non-character-type or deep type
"P". The current program is flagged as a Unicode program. In the Unicode
context, type X fields are seen as non-character-type, as are
structures that contain non-character-type components."
Indrajit

How to display hidden columns in Management Cockpit Reports

Hi all,
I need to display columns with zero values in a management cockpit report graph. I think the report had been set to hide columns without values and only brings charactesitics whose values are not equal to zero.
Could anyone help?
Thanks in advance.
Sezin

HI,
After you are executing the report, on columns right click & select filter options-> if 0 values will be there then you can filter it by 0 & get the report

Can we sort saved report list by name

Hi,
I have interactive reports and users can open this interactive report and according to their different requirements they can save this report(as a public) with different names.
Ex: interactive reports
Reports(lov) :1.Primary report
2.xxx test
3.yyyy
4.abcd test
5.zzzz test
Can we sort saved report list by name?
Could you please guide me to achieve this requirement.
Thanks in advance.
Regards
Narender B

Narender wrote:
Hi,
I have interactive reports and users can open this interactive report and according to their different requirements they can save this report(as a public) with different names.
Ex: interactive reports
Reports(lov) :1.Primary report
2.xxx test
3.yyyy
4.abcd test
5.zzzz test
Can we sort saved report list by name?
Could you please guide me to achieve this requirement.It's a lot easier to do so if the following information is provided (as has been repeatedly pointed out to you):
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
Sorting of the saved report list by report name was introduced in APEX 4.1.

ME2N report displaying more columns in Background than foreground.I want same columns in Background as Foreground

Hi All,
ME2N report displaying more columns in Background than foreground.I want same columns in Background as Foreground having 10 columns.Already i have created the default variant in foreground when i execute the report in background by proving the same variant it is displaying more columns almost 70 columns.Kindly suggest and guide me how to restrict the report to get same columns in background as in foreground.
Kindly provide is there any OSS Note available.
Thanks,
Prashanth Reddy

I do not think it is possible to assign default layout for background job.
System will show you all field for background job for transaction ME2N.
Actually the screen layout is assigned with t-code (ME2N)
When the report is running in foreground, then system will take the screen layout for the t-code.
But when you run the background, then system will run the program directly (does not take the t-code). So the default screen layout will not fetch during running the background job.
For more details have a look into the thread Selecting layout in selection screen

Displaying Report name in the PDF File.

HI,
I want to print the report in the PDF format.
I executed one report and i am trying to print that report in PDF format.
But in that PDF format it is not showing any report name.
Can any body suggest me how can i get the report name in the PDF file.
Thanks in Advance.
BR
Rajesh

hi suri,
chk this link..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6dd54713-0c01-0010-8691-a3576b9a95d9
go thru these threads for more details..
Reg converting the BW report in PDF format
PDF Report
assign pts if helpful..

Displaying the report name in the 'No results' view

Hi guys,
This is 10.1.3.4.1
In the *'No results' view*: is it possible to retrieve and show the Answers request name dynamically?
I've found two threads:
Changing the default No results text
http://forums.oracle.com/forums/thread.jspa?messageID=8312398&#8312398
Show Report Title (Header) when no results
http://forums.oracle.com/forums/thread.jspa?messageID=4575238&#4575238
but those solutions require a customisation on a report by report basis, and the request name must be hardcoded.
Ideally, I'd like to have something like:
'Results not found for report <script type="text/javascript"> print report.name </script>'
which I can actually put in the noresults.xml file, and would affect all the requests which include the 'No results' view. Replacing the dashboard section or hardcoding the request name in the No Results view is just not maintainable.
Any ideas or recommendations?
Thanks, regards.
Alex.-

hi Alex,
Ideally, I'd like to have something like:
'Results not found for report <script type="text/javascript"> print report.name </script>'First thing is No Results view ll not accept the "HTML/Java script",so we cant achieve the above syntax
Second ....there is not option available in No Results to show dynamic names
u can do that in title view but as you said manual work ll be there
Thanks,
Saichand Varanasi

SAVED REPORT NAME TO BE DISPLAYED IN COLUMN

Similar Messages

Maybe you are looking for