SB Live Value!(Ct4780) not detected when connected--WinXP Pro--Dell Dimension XPS T8

heya, i recently went down to the US Virgin Island to work on my cousins charter yacht as first mate(from Jan '05 - Aug '05). Anyways getting back on topic, I come home to my desktop PC the way I left it with the case always off because i lost many of the screws for the PCI slots and i would frequently need to reseat the cards; and because i frequently would mess around with an ultra66controller trying to get it to work. now when i got back i booted up my pc and did a quick checkup(devmgmt.msc, msinfo32, services.msc, etc) and for some reason my sound card is not detected. sound & audio devices in the control panel listed no audio device. There is no listing of anything related to the card in sound, video & game ctls.(no WDM compatible entry or anything). I tried to change the PCI slot of the card, but each time to no avail. i am thinking it has something to do with the integrated BIOS sound, or this old Yamaha driver for Dell(i was messing around with an old resource cd and i think i may have installed it a few weeks to a month ago, my memory is blurred thanks to some xanax that night so im not sure if i did. anyone have any ideas?

Hi,
Does the BIOS detect the card? depending on the mboard you do sometimes get a summary of all PCI devices in the system so I'd be checking here to see if it is appearing. After that I'd be checking another computer to see if the card has failed.
If the card passes onother system then there may be a problem with the BIOS NVRAM - some sort of problem that is preventing the card from being detected. Resetting the NVRAM (usually involves moving a jumper on the board) and then restarting after the reset can sometimes do the trick. This is a last step though and I'd suggest verify the card is actually working.
Hope this hel
ps.
John

Similar Messages

T420 - external 24" monitor DVI- Displayport : not detected when connected via KVM switch

Hi,
I've been using a 2port USB KVM Switch from InLine for a long time connecting a mac mini and a macbook pro
to a 24" LCD. Recently I had to replace the MacBookPro with a T420. Unfortunately the T420 does not detect the
monitor, when connected via the KVM switch.
I tried:
A) T420 -> Lenovo Displayport to DVI-Adapter -> KVM-Switch -> 24" monitor: NO SUCCESS
B) T420 -> Thinkpad miniDock Series 3 DVI Port-> KVM Seitch -> 24" monitor : NO SUCCESS
C) T420 ->Thinkpad miniDock Series 3 DVI Port-> 24" monitor - > SUCCESS
D) T420 ->Thinkpad miniDock Series 3 VGA Port -> 24" monitor - > SUCCESS
So I have a workaround, but leaving out the KVM switch is not a long term option.
This is all on Win 7 professional / 64bit
Using config (A) I then installed the Intel HD Graphics Driver version 8.15.10.2342 16 May 2011
SURPRISE: during driver install, the monitor WAS detected!!!
SECOND SURPRISE: after reboot I was back in the old situation where the monitor was NOT DETECTED
CONCLUSION:
Seems like a software issue with the Intel HD Graphice driver.
ANY HINT/COMMENT/HELP highly appreciated!
Thanks,
Michael

hey mgold,
as the T420 works correctly with the external monitor and with the miniDock ; it is sad to say the the KVM switch is non-compatible.
I would recommend that you get in contact with the manufacturer of the KVM. At the same time, try uninstalling the current video drivers of your T420 and see if it makes any difference with the KVM if the T420 is running on a generic driver
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

"Mode not supported" when connecting MacBook Pro to HDTV

When I connect my MacBook Pro to the SAMSUNG widescreen HDTV and hit "Detect Displays", it does detect it as VGA Display and it gives me a bunch of options for resolutions and refresh rates, but there was no "Options" tab where I could check or uncheck "Overscan" and even keeping the refresh rate at 60 Hz, and even trying mirrored and non-mirrored screens, nothing worked. It still said "Mode not supported". I used a dual-link DVI to YPbPr cable which I just bought and my friend can connect his MacBook Pro to his HDTV with the same cable, but it doesn't seem to work for me. What's wrong?

Try using an app like to get the stranince resolution:
SwitchResX – The Most Versatile Tool For Controlling Screen Resolutions On Your Mac
Display Menu from Mac App Store
The monitor specs
Native resolution1440 x 900
Resolution720p
Supported DTV resolutions576i
Supported computer resolutions640 x 480 (VGA)
PC InterfaceVGA (HD-15)
Video InterfaceComponent, composite, HDMI, S-Video, SCART
From:
http://www.cnet.com/products/samsung-le19r86wd-19-lcd-tv/specs/

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone. I've since deleted this podcast with no luck. I've restarted both the phone and the computer, still no luck. One computer is running Vista and the other Windows 7, both have the latest Itunes Update. Anyone have a fix for this?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

Photo Downloader does not detect Thunderbolt connection. Help!

I am using Bridge CS5.1 on MacBook OSX 10.8.3. I bought a Seagate Thunderbolt Adapter which works with 2.5" eSATA hard drives (Seagate Backup Plus). Instead of connecting a 2.5" eSATA to this Thunderbolt Adapter to my Mac, I am doubling this thunderbolt connection as a CF card reader by swapping the eSATA portable drive with a CF to eSATA Adapter instead. Photo Downloader does not detect anything connected through thunderbolt!?
When the CF card or portable drive is connected via the TB adapter, it appears in Bridge and Finder. The Canon's Image Browser (Memory Card Utility) detects only the CF card (not the portable drive) as a Camera and downloads the images from the CF card via the thunderbolt adapter with no issues. I would prefer Bridge to download the images due how the folder names are created by Bridge. (I have been using Bridge for few years now and dont want to change the naming convention. Can't seem to find a way for Canon to name it exactly the same as Bridge. It does YYYY_MM_DD amd I cant get rid of the underscores in Canon's software)
How can I get Photo Downloader (File: Get Photos from Camera...) on Bridge CS5.1 to detect the Thunderbolt connection as a Camera?
Excuse my messy desk, here's a pic of the set up with the CF card plugged into the CF to eSATA adapter : and onto the Seagate TB Adapter. and the TB cable goes into the Mac

It works perfectly well. My issue is getting Adobe Bridge 5.1 to recognise the CF card via thunderbolt in photo downloader.
Despite having bought a MacPro just a few months ago I still have no Thunderbolt connection so i can't confirm this.
I do know Photodownloader has not changed a bit since it was presented long time ago and definitively needs a lot of improvement.
It is very possible that Photodownloader is not capable detecting thunderbolt connections and Canon software doing so does almost proof APDL does not do so.
You can try to dive in the user library (by default hidden, use menu Go and press option to reveal it) and in the folder preferences find and delete the Photodownloader plist file manual.
restart photodownloader and try again.
The other option is to use a USB 3.0 or Firewire (both also pretty fast).
The third option is to use Bridge itself for renaming the files you imported manual. Using the sort order creation date and batch rename use the option for shot date (yymmdd-number or other info) and either organize with stacks or create folders.
There is also a nice app (not free but cheap called 'big mean folder machine" from the same team that offers 'A better finder rename'.
Both offer plenty of options that makes life easier, such as producing folders with specific naming and order in no time

My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband. I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition, but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr 12 PER = 05YR etc, that does not really help me :-). It won't print any testpages. H E L P!!!

Hello Elisabeeth,
Welcome to the HP Forums!
I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

Itunes 10.4 not launching when connecting iphone

Snow Leopard 10.6.8. Just updated iTunes to 10.4. iTunes will not launch when connecting the iPhone to my MacBook Pro. Once connected, manually opening iTunes will allow the sync to happen, but only then. iTunes helper app is there in Login items.
Minor inconvenience, but could be a problem if I miss too many syncs due to this.
Any thoughts?

I had the exact same problem upgrading iTunes to 10.4 on Snow Leopard. It looks like there's a problem with iTunesHelper under Login Items. I found the solution here: https://discussions.apple.com/message/15666966 Simply follow the instructions to re-add iTunesHelper to Login Items, restart, and you should be good to go!

Tv not supported when connecting HDMI to ipad 30 pin connector running ios 8

tv not supported when connecting HDMI to ipad-2 30 pin connector running ios 8. Was working fine with ios 7.

Hello,
I need to conect it to either a mouse or an OLED display to transfer the content I was going to use thee standard charging USB to a port splitter and sending it from there but I wanted to check before I did something stupid.
Thanks.
James

My new ipod 6th generation doesn't appear on itunes and does not charge when connecting to iMac...Any suggestions?

My new ipod 6th generation doesn't appear on itunes and does not charge when connecting to iMac...Any suggestions

If you have a PPC iMac, see KB Article: http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
Intel iMac, see KB Article: http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC)
Your iPod is "new" & still under warranty.
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
Or, take your iPod Nano to your local Apple Store or AASP.

MBA battery does not charge when connected. Help!

My MBA battery does not charge when connected to the charger. Ive checked the other threads and followed advice but nothing seems to help.. My battery health info is good, I've tried cleaning the magnetic pins of the charger, reset smc but it still does not charge. The light on the charger is green or does not come on sometimes, and it's the same for a few Power outlets. What else can I do? Would greatly appreciate any help! Thanks.

It recognizes the charger intermittently. After cleaning, it showed the charger as connected but not charging the battery. I will try my friends charger later to see if it works. Thanks for your help!

X-fi fatal1ty device not detected when running speaker selection wizard

Gx-fi fatalty device not detected when running speaker selection wizard? ?
System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
Origional CD fails to detect the card, claiming a supported device is not present.
This card has worked prevously, and is verified as fully functional in windows Vista. ?
Please note Windows Vista can not be used.
I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
does anyone hav a sugestion that is not already posted on this forum.

Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
I'm guessing that the card is pretty much toasted eh?
--Jakk

Emails will not send when connected to wifi

Emails on my iPad and iPhone will not send when connected to wifi, any help would be appreciated

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HT3887 why does my iPhone say device not supported when connecting to my make even after it has successfully paired?

why does my iphone say device not supported when connecting to my mac pro, even though it has already succesfuly paired? I also use a wirless bluetooth keyboard and mouse on the computer successfully.
Also when I turn Bluetooth on on the phone the devices cog never stops turning (forever serching for a device)

iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer.
It couldn't be much easier than that as you don't actually have to do anything more than normal.
This lets you listen to voice memos on your computer and provides a backup if you delete them from iPhone.
Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
USB syncing is far faster than Bluetooth.

Server not responding when connected to Internet

ServerSere ever not responding when connected to internet

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You may have to re enter your Wi-Fi password.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections
iOS: Wi-Fi settings grayed out or dim

Re: Not getting audio from TV when connecting MacBook Pro with all correct cables.

How do I get audio from the TV when connecting MacBook Pro with all the correct cables?

Hi Lynn,
If you're positive you have the correct cables, and positive they work, they must be plugged into an input on the TV made for that purpose, then that input must be selected on the TV's menu.

SB Live Value!(Ct4780) not detected when connected--WinXP Pro--Dell Dimension XPS T8

Similar Messages

Maybe you are looking for