SBWP: The content of message is not display

Hi,
The user use SBWP inbox. There the message is not display the content of the message.
There I uninstalled and install again the SAP GUI and Windows, but there has been the same. Only the head of message is displayed.
There can only print the content of message.
What I have to do to display the content?
Regards,
Betta

nyet wrote:
Sir,
When forwarding SMS as email, the content of the SMS is stored as an attachment called <primary_text.txt> file, it's double pain since the receiving person can not read the attachment via Z10 since the device can not open *.txt> file extension.
If it's possible, please restore this functionality back to the way of OS 6/7, which put the content of the SMS in the body of email, since I do rely on this feature heavily.
Leo 
How exactly are you trying to forward an SMS as an email?
You can forward the SMS to an email address of your choice and that`s when your SMS will be converted to MMS, and sent to the email address of your choice . The recepient should get your message as "[email protected] carrier.com   
Another way of doing it is to select "Share" instead of forward. Then a list of options will open that includes your email address. Select your email address and the selected text message will be added as "body.txt" and after this, you just have to enter the recepient email address and subject line (optional).
The recepient will receive the email with a "body.txt" attachment that can be downloaded and open in or with the "Notepad" on PC

Similar Messages

  • My messages are not displaying, in the body of the message?

    When going to mail I see messages but the body of the message does not display.

    Try closing the Mail app completely and see if they show when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Error Message is not displayed on the pop screen for chain end chain

    Hi,
    I have called a screen in one of the standard program using enhancmenets,
    and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
    but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
    regards
    afzal

    Hi,
    have you tried option "LIKE" with instruction MESSAGE.
    Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
    And instead of using a MESSAGE instruction, why to not use a popup ?
    Like using one of these function modules (for instance):
    TMS_BCU_POPUP_TO_CONFIRM
    POPUP_TO_CONFIRM_STEP
    POPUP_TO_DECIDE
    FC_POPUP_ERR_WARN_MESSAGE
    etc...
    If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
    Regards
    Mickael

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • Warning messages are not displayed in confirmation

    Hi,
    We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
    Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
    Thank you
    Natarajan

    Hi Muthu,
    Thanks for your reply. We raised the OSS message for this issue. As per  the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
    In the DELETE mode, the system will display only the first EXPRESS
    ERROR message and not WARNING messages.
    Inorder to maintain an error message as EXPRESS, the FIELD_NAME
    (i.e ls_message-field_name) has to be assigned with the value
    EXPRESS.
    For example,
    ls_message-msgty = 'E'.
    ls_message-msgid = 'ZF'.
    ls_message-msgno = '000'.
    ls_message-field_name = 'EXPRESS'
    Kindly note that in the DELETE mode, the system does not display
    EXPRESS message with msgty = 'W'.
    Only EXPRESS message with msgty = 'E' is recognised and displayed.
    The Warning messages will be displayed only during the CHECK mode.
    Thank You
    Natarajan

  • Some Text Messages do not display when using large font on iphone

    When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

    Hi Peter
    Actually, Captivate does have an essentially unlimited number
    of undo levels. But that number may appear to be different. The
    number of levels starts when you begin editing the project. If you
    close and re-open a project, that starts the undo process over.
    I've tested and I gave up after about 280 or so undos.
    Where Captivate doesn't allow an undo, it normally warns you
    with a rather catastrophic looking dialog.
    Cheers... Rick

  • LSO_CHECK_BOOKING custom error messages are not displayed

    Hi,
    Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
    Is there a way for me to display my custom error message instead of the predefined SAP message?
    Thanks a lot.
    Cheers,
    James

    Hi James,
    You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
    Learning Portal:
    The framework of the existing design of the Learning Portal does not
    allow customer specific error messages to be displayed in the portal.
    Only a generic message will be displayed when prebooking in the learning
    portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
    application does not expect to raise an exception from the BADI. If the
    BADI processing is assumed to be unsuccessful, the messages filled by
    the BADI will be ignored and a general error message will be displayed
    in the portal.
    So this is basically a design limitation.
    Administrator Portal:
    Have you tried e.g. the following notes?
    SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
    SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
    Regards,
    Agnes

  • My 160 g ipod classic wont synk past 4 gigs and when it gets to 4 gigs it erasis all the content a message unknown error occurd (13011)

    my 160 g ipod classic will not sync past 4 gigs and when it gets to 4 gigs it erasis all the content a message unknown error occurd (13011) i have formated it with windows and restored it several times nothing works should i toss it and buy a new one or is it me doing somthing wrong

    Thanks everyone, lots of good suggestions here.
    I did briefly consider trying the idea of grouping smaller loads of playlists to upload, but I also noticed that each time I ejected then re-synched the iPod a few more gigs of music would upload.
    So I just kept at it until most (nearly all) of my music made it onto the thing.
    This seems like a really rudimentary thing for Apple to fix - but more fundamentally, this shouldn't happen at ALL. When they market a new product, having such a basic issue plague it seems very Microsoft-like.
    Up to this point I've never been disappointed with anything Apple has ever done.
    This issue is purely and simply bad design and slipshod programming. I hope they fix it in the extremely near future.
    Thanks again for all your help and suggestions guys!
    Cheers
    Dex

  • The Wireless Network tile is not displayed in Windows Mobility Center

    In my Vista X64 Enterprise that besides this behavior runs perfect i lose the The Wireless Network tile, Microsoft has even a KB about this see http://support.microsoft.com/kb/934555
    +The Wireless Network tile is not displayed in Windows Mobility Center on mobile PC that is running Windows Vista+
    Point is that i have the latest drivers (from Windows Update) on my MBP for my AR5008X and i installed the lastest bootcamp update (2.1) On a Fresh Vista installation the tile works for a day and then it's gone, it shouldn't disappear.
    How can i recover this tile, i turn of wireless often so i need this option!!?
    Message was edited by: piojo

    Nobody has the issue that when press Windows X (to get the mobility center) finding that the Wireless TILE is missing?

  • I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7. Please confirm. iPhone

    I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
    Please confirm.
    iPhone 4, iOS 7

    Hello jayanand,
    You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    Allen

  • Tried to "Open As" in PS a NEF file I modified in LR.  Got the following error message:  "Could not complete your request because the file format module cannot parse the file."  I can "Open" the file in PS, but then the changes I made in LR (and saved in

    Tried to "Open As" in PS a NEF file I modified in LR.  Got the following error message:  "Could not complete your request because the file format module cannot parse the file."  I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file.  HELP!

    If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
    There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
    Gene

  • The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

    I have a 2 server SharePoint farm.
    All outgoing emails were working fine.
    I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
    The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Even if I setup Alert on some list, it doesn't send email.
    I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
    What could be the cause of this and how to fix it?
    EDIT
    I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

    This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
    AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
    I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

  • Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

    Hi all,
    I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
    I am having a variable named filename and archivefilename and two fileconnections  one is originalfiles and archivefiles
    archivefilename=replace( @[User::filename],"datafiles","archive")
    orginalfiles connection is an expression =@user:filename
    archivefies connection is an expression=@user:archivefilename
    the filename comes from reading the folder that contains those files
    public void Main()
                string[] filenames;
                filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
                Array.Sort(filenames);
                Dts.Variables["filelist"].Value = filenames;
                Dts.TaskResult = (int)ScriptResults.Success;
    The folder c:\luminis\archive\ exists
    why I am getting this error
    My filesystem task : destinationpathvariable =false
    destinationconnection:archivefile
    overwrite=true
    operation=movefile
    issourcepathvariable=false
    sourceconnection=original file
    why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
    sohairzaki

    there may be 2 problem...
    1> specify a target directory only, not with the file name. 
    OR
    2> Try using the unc,path format \\computername\sharename\
    let us know your observation...
    Let us TRY this | Mail me
    My Blog :: http://quest4gen.blogspot.com/

  • My sent messages are not displayed...what happened and how do I restore?

    My sent messages are not displayed...what happened and how do I restore?

    http://kb.mozillazine.org/Disappearing_mail

  • Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

    Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

Maybe you are looking for