Scale nine for scalable components?

Is there any way to make a scalable component use scale nine coordinates? It seems that the only options for scaling are to tile or scale (stretch) the image/layer. I'd love to specify the edges so they aren't distorted.
Thanks!

You will need to take your project into Flash Builder to create components that scale. Scale nine, resizable components, and constraint based sizing are not supported Flash Catalyst 1.0
These were pretty big features to bite off for 1.0, so expect them in the next version.
Ty

Similar Messages

[svn:fx-3.x] 10899: Same fix as 10898, just for halo components.

Revision: 10899
Author:   [email protected]
Date:     2009-10-06 14:11:50 -0700 (Tue, 06 Oct 2009)
Log Message:
Same fix as 10898, just for halo components.
QE notes: -
Doc notes: -
Bugs: SDK-23263
Reviewer: Darrell
Tests run: checkintests, rob ran mustella tests for Window/WindowedApplication in the trunk version of this checkin
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23263
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/airframework/src/mx/core/Window.as
    flex/sdk/branches/3.x/frameworks/projects/airframework/src/mx/core/WindowedApplication.as

Quote
Originally posted by Assaf
Why use 3D Mark as a measure memory preformance ?
3D Mark 2003 isn't affected by the system anyway, it's a pure GPU test.
It resaults the same on a PII350 and on a P43.0 with the same VGA card.
Use SANDRA memory bandwidth to test memory bandwidth, your RAM should be running at 333MHz dual channel giving a mak bandwidth of 5333MB/S.
It should be pretty close to that on the FX/opteron because of the efficient memory controller, but not exactly 5333. Anything above 2666MB/S (~2700) means your in dual channel - as it should be with 4 sticks.
Actually, that's not true. People tend to call it "dual channel" because the performance scales to twice as the memory bus data width has been increased to 128 bits wide. Just like you used to have to put 2 32 bit dimms in a Pentium board, you do the same thing for an Opteron. But since we're better programmers now (joke), you can opt to leave a dimm out and fall back to 64 bit wide mode for easier user compatibility.
Trust me, I've got datasheets, and it doesn't say dual channel anywhere. AMD doesn't even us the term "channel."

Prevent creation of reservation for selected components on Production order

Hello all,
I am aware that the production order reservation creation is dependant on the order type, but is it possible to avoid the reservation creation for few components on the order ? Any techincal way? We want to issue our components to a different batch than the one reserved during the production order creation.
Any help will be greatly apprciated.
Thanks,
Swetha

Your material is get reserved for Production order as per the Order start date & Order release. What you can do is make the start date of the Production order & release it. If any other production order are already there & you can re set the ATP of that production order.
Say there is one production order starting 2 days after & your all raw material is blocked for this production order. And the other production is having date after this now you want to give ATP from 1st order to 2nd order. For this 1st make the start date of 2nd prod order before 1st. Then Go to COMAC select both Prod Ord & GO ATP with check reset ATP. You see that ATP is passed from 1st Prd order tp 2nd.
Regards
Abhijit Gautam

Planning of Dependent Requirements for BOM Components in Make to Order scen

Hi Friends - I want to execute a full cycle Make to Stock Scenario with Materials planning using MRP.
The scenario will include BOM Components with Routing.
The process flow I want to execute -
1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
2. Do the product Materials Planning for the Sales Order through MD50
3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
4. Convert Planned Order for Product to Production Order
5. Convert Planned Orders for BOM components to Purchase Requisition
6. Confirm Production Order
To execute this I have done the following
1. I have created a Material Master data for Finished Product (FERT).
2. I have assigned Item Category Group - NORM, and General Item Category group as NORM
3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
4. Now created a Universal (Type 3) BOM for the product with one material component.
5. Now also created a Routing for the Material with two operations having PP01 a control key.
6. Now created a standard sales order for the product.
7. Executed the MD50 for the Sales Order Item.
Now where do I find the BOM components for this material in the Sales Order?
After executing the planning Run MD50 I am only getting the requirements for Product only. I can't see any dependent requirements for the BOM components.
How do I make sure that the BOM components are also planned while the product is planned?
I have checked the component Stock Requirement List - there are no requirements generated from the Sales Order Product BOM.
Pls help me on this. How to do this so that the raw material components are also planned?
Thanks
Purnendu

Hi Dhaval, Sandeep, Ashok - Thanks a lot for your replies.
I have checked the Planned Order Created through Planning Run.
If I click on the Components Tab I am getting following message
No material components were determined
Message no. 61027
Diagnosis
Until now, no BOM explosion has been carried out or no BOM has been created for this material yet.
Procedure
Either explode the bill of material for this material, or
create the components manually by processing the planned order in change mode.
If I try to explode the BOM through Header Menu - Edit> Explode BOM
I am getting the same message.
If I click on the Bill of Material Tab - I am getting the same above messge.
Ashok - I have tried both the Selection Method -
Nil - Selection by Order Quant.
1 - Selection by Explosion Date
But with no effect.
Waiting for your advice.
Thanks and warm regards
Purnendu

Batches not getting for order components at time of order creation

Hi Folks,
My requirement is that when I create a production order and save automatic batch determination should take place for all components. For this I have done all the settings for eg
1) Assigment of batch search proceduree to order type
2) Define batch search strategy,procedure , condition , access sequence
3) Create batch strategy record for order type/ plant/component by COB1
4) Create sort rule and assign to batch strategy record
5) Batch classification is there and value of the sort chracteristic is populated in all batches
6) There is enough available stock in the batch at that storage location
But batch field is not getting populated .. Even if I press the batch determintion button manually
on the component overview screen batch selection screen is appearing but no batches are getting determined for selection .I have checked the selection criteria and it is correct and I was expecting batch 'ZSWETA' to b determined as it is satisfying the selection criteria. I am really wondering why this is happening as I have done all the required config settings but batch determination is not happening..
Can you please help me out of this...
Regards
Suchandra

Hi,
kindly check the following things-:
Material master -: Purchasing View tick in check box of Batch Management
MRP 2 -:Batch Entry(Select 3-Auto Batch entry on Release)
Work Scheduling -: Batch Entry & Batch Management.
hope it will help you to get the auto Batch Number.
Regards,
Mukesh

[svn:fx-trunk] 5170: Round 2 of bug fixes for the Spark skins for Halo components.

Revision: 5170
Author: [email protected]
Date: 2009-03-04 17:50:32 -0800 (Wed, 04 Mar 2009)
Log Message:
Round 2 of bug fixes for the Spark skins for Halo components. Thanks to Alex for help with the data grid issues.
Bugs fixed:
SDK-19655 - Setting rowCount property on DataGrid causes extra blank row to be displayed
SDK-19652 - Items in a DataGrid do not line up after scrolling.
SDK-19605 - disabled Halo ColorPicker with Gumbo skin draws too dark
SDK-19596 - When you have a single button on an Alert, the left edge looks flatter than the right
SDK-19585 - Menus compiled with the halo theme in Flex 4 have a different backgroundColor than in Flex 3
SDK-19665 - Halo List with Gumbo skin doesnt draw the alternating item color all the way to the right edge of the control if VScrollBar is present
SDK-19651 - odd header rendering issue on Halo DataGrid with Gumbo skin
QA Notes: The alert layout code was positioning the buttons/text on sub-pixel boundaries if the width or height of the alert was an odd number of pixels. We always snap to pixel boundaries now, but this may cause bitmap compare issues with Alert.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19655
http://bugs.adobe.com/jira/browse/SDK-19652
http://bugs.adobe.com/jira/browse/SDK-19605
http://bugs.adobe.com/jira/browse/SDK-19596
http://bugs.adobe.com/jira/browse/SDK-19585
http://bugs.adobe.com/jira/browse/SDK-19665
http://bugs.adobe.com/jira/browse/SDK-19651
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/alertClasses/AlertForm.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/ScrollControlBase.as
flex/sdk/trunk/frameworks/projects/halo/defaults.css
flex/sdk/trunk/frameworks/projects/sparkskins/src/mx/skins/spark/ColorPickerSkin.mxml

How do I get a picture to stay when I move and scale it for my home screen?

How do I get a picture to stay when I move and scale it for my home screen?

Unfortunately that seems to be a known bug. And something we have to wait for APple to fix. THere are other threads on the same topic and some people have work arounds so you might want to poke around in the 'more like this' on the right.

Change BgColors, FgColors for all Components in a Container?

Is there a possibility to change the Background Color, the Foreground Color and the Fontsettings for all Components in a Container? Each Component in the Container should get the Colorsettings of the Container...

Just overwrite the add, setBackground(), setForeGround() and the Font-methods of the Container:
public void add(Component c){
super.add(comp);
comp.setBackground(...);
comp.setForeground(...);
//...the Font-stuff
public void setBackground(Color c){
for(int i=0;i< getComponentCount(), ++i){
getComponenetAt(i).setBackground(c);
//the same for setForeground and the Font-methods.

Table for PO components

HI All,
Plz let me know the table used for PO components.
Regards,

Hi,
Use the tables mentioned below in the sequence mentioned to get the components:
MAST -- Material to BOM Link
STKO -- BOM Header
STPO -- BOM item
Regards,
Chandra
Edited by: chandra piminty on Dec 9, 2009 1:09 PM

Sales for BOM components

Dear All,
We have all the components of a finished product in our stock. The product assembly is very simple.
So, very well, we can send the components directly to customer, if he is willing to assemble it himself. This way we can reduce the time to deliver it to customer.
Is there some process like this in SAP where this is possible?
Regards,
Prakash

Hi
If you want to deliver the componentS as well as charge PRICE for the components, then the Item category Group for the Main item should be LUMF and the Item category Group of the Sub-Items(Componenets) should be NORM.
Once the BOM material is exploded in the Sales order, then you will find the Item category of the Main Item as TAP and the Item category of the Sub-item as TAN.

Logging same NC code for multiple components

Hi,
When logging NC codes in SAP ME 6.0 it is possible to log the same NC Code (defect) against many ref-des for
multiple components.
However when logging a secondary code (Action) for the previous primary NC Code all the choosen ref-des and components
don't get copied..
Is this how it is supposed to work or is there a setting somewhere so that all ref-des and components gets copied?
Best Regards,
Johan Nordebrink

Hi Johan,
The matter of your question is related to Ref Des List re-desinged for 6.0.
Overall situation looks like a design gap because:
- no explicit statement in the documentation describing the case of copying multiple Ref Des'es;
- the case of 1-to-1 relation between Component and Ref Des is mentioned in the context of auto-population of these feilds on tabbing out if one of the field is populated;
- the case of single Ref Des is widely referenced in the context of VTR that is a new feature in 6.0.
So, if you need this to be reviewed by Product Mgmt (maybe they agreed to identify this as a bug), as usually you should either ask your SAP ME Consulting representative or submit a support ticket (depending on whom you pefer to talk with ).
Regards,
Sergiy

Subcontracting PO - Batch number to be made mandatory for the components

Hi All,
I have a situation in Subcontracting PO. The components which are sent to vendor need to be updated with Batch number. Is there any User Exit / Configuration available, which can provide a error message to the user when ever he tries to save the PO without the batch number entered for the components.
SAP allows to save the SC-PO, if the batch numbers are not entered for the components which are batch managed. I have checked the PO Fields in Customizing, which has control of the Batch number for the header material in the material data tab & not for the components which will be available after the BOM icon is clicked.
Appreciate if you experts provide a solution / work around for the above scenario, as the client is a pharma client & they need to exactly match the batch which has been sent out for making Finished product with the Sub contracting vendor.
Thanks for your help & awaiting your reply at the earliest.
Regards,
Sathya Padmanabhan

Hi,
you shoudl definitively check out SAP best Practices for Pharmaceuticals, which can be foubnd in the helpportal:
http://help.sap.com/bp_pharmav1600/Pharma_US/index.htm
Go to the Business Information area....there are some subcontracting scenarios....
Oliver

How to create new scale basis for shipment costs without modification?

Hi,
at the moment I am trying to create a new scale basis for shipment costs.
It is not a problem to create a new scale basis in table view V_TVFRFQ. The creation of an Append structure in the communication structure KOMK is easy, too.
The problem is the following:
When creating a scale for a scale basis with transaction VS01, the system picks some screens out of function group V57S. For my new scale basis there is of course no screen in this standard function group.
So my question:
How to create/generate a screen to create scales for my new scale basis without a modification of function group V57S?
To me it makes no sense that SAP offers a possibility to create customer owned scale bases but then gives the customer no possibility to create an input screen for that scale basis without modification. Therefore I think it should be possible to generate such a screen in some way.
If you have some idea, let me know.
Thanks!
Christian

Hi Christian,
We are currently facing exactly the same problem you described in your message in January 2009. I see that you have marked this as "answered", and was wondering if you would mind explaining how you overcame this issue?
Any assistance would be hugely appreciated.
Many thanks,
Kaushik

Restriction on memory scope for UI components binding

Hello
I'm using JDeveloper 11g 10.1.1.3
I found in the Fusion Developer's Guide for Oracle ADF (14 Getting Started with ADF Task Flows) next thing:
<i>
Restrict the scope of the managed bean that you reference through a UI component's binding attribute to backingBean or request scope. Instances of UI components cannot be serialized. Objects in scopes other than backingBean and request are expected to be serializable. For this reason, you should not bind UI components to managed beans that have a scope other than backingBean or request. Note that JDeveloper defaults the binding attribute for UI components and region fragments to use the backingBean scope.
</i>
By now I often have binded UI components to the managed beans with pageFlowScope or viewScope, but I have not got problem with that.
So, question is: what is the case that managedBean with view or pageFlow (even or session) memory scope will be needed to be serialized?
When could I get the problems with that?
Anatolii

For more details you may have a look at section 20.4.3 here:
http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/web_getstarted.htm#CACCFIII
http://download.oracle.com/docs/cd/E17904_01/web.1111/b31973/gs_jdev.htm#ADFUI11666
Dimitar

Why no SCALE option for lightbox images?

Need SCALE options for lightbox images!
Must have SCALE DOWN option.
Images must scale down to display correctly on a smaller screen.
Currently Muse Lightbox FAILS on smaller browser screens.
Adobe please include this feature ASAP!

Thanks for the reply
The problem with the Fullscreen Lightbox is that the images scale up and pixelate on a larger browser viewport.
(To avoid this requires a very large image that makes loading slow)
So for Fullscreen Lightbox I would like a SCALE DOWN ONLY option (requested previously). Then the images would not scale up above 100% and would float centred on larger browser viewports (FIT PROPORTIONALLY option used).
And for the standard lightbox a scale option, as requested above, would mean the image doesn't overflow on a smaller browser viewport.
The reason for asking for scale options is to keep images looking their best at 100%, and downscaling for smaller browser ports.

Scale nine for scalable components?

Similar Messages

Maybe you are looking for