SCAN IP requirement?
I am building 2node rac in 11gr2. Scan ip requirements is confusing me. Do we need three ip's for SCAN?
Listed below the required ip's for both nodes
2 - public interface, each ip for each node
2 - private interface, each ip for each node
2 - VIP, each ip for each node
SCAN - How many ip's?
Do we need configure the DNS or host file configuration is sufficient ?
user530956 wrote:
I am building 2node rac in 11gr2. Scan ip requirements is confusing me. Do we need three ip's for SCAN?
Listed below the required ip's for both nodes
2 - public interface, each ip for each node
2 - private interface, each ip for each node
2 - VIP, each ip for each node
SCAN - How many ip's?
two NIC is enough.
Do we need configure the DNS or host file configuration is sufficient ?host configuration is enough.
may i know the OS?
Similar Messages
-
Time Machine, Deep event scan at path: /Volumes/Data reason:must scan subdirs|require scan|
Had a data drive failure, replaced it. Restored just that volume's data from TM to the new drive via "cp -a". For some reason just that drive (DATA) forces a full scan at every TM backup. Have also upgraded to 10.8.1 to see it that would fix things, but no.
from .Backup.log:
Running preflight for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 6DA5C1F4-C522-48B2-892A-36362C54F632)
Scanning nodes needing deep traversal
Deep event scan at path: /Volumes/Data reason:must scan subdirs|require scan|
Calculating size of changes
Should copy 61 items (76 KB) representing 18 blocks of size 4096. 510751904 blocks available.
Preflight complete for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 6DA5C1F4-C522-48B2-892A-36362C54F632)
Time elapsed: 0.002 seconds
Mind you at this point, I've excluded all of the contents of DATA from actually being backed up (the 61 items is a separate bug in backupd where it reports file counts incrementally instead of per volume), it was doing a FULL copy every time, regardless of what actually changed.
From everything I've been able to read/find/fiddle with, the part that doesn't make sense is the the "require scan" on the "Deep event" line above. Other people have had problems with full scans, but it's usually something about 'no fsevents db' or "fsevents reset".. this one feels like a setting somewhere telling it to do a full scan, and that's where I'm lost.
The only thing I haven't done yet is fully reset the TM machine drive.. I'll do it, but in theory there should be a reason that will fix this. I.e. a setting on there I could fix instead. I'm not a big fan of reboot/reinstall/... method of fixing things, it just hides the problem instead of solving it.
And to make this into a question.. how do I fix "Data" to be more like my "Video" drive :
Running preflight for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Calculating size of changes
Should copy 58 items (32 KB) representing 7 blocks of size 4096. 510751904 blocks available.
Preflight complete for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Time elapsed: 0.000 seconds
Thoughts?when this one went off, I wasn't even home. only safari, console, terminal and finder running. though there is a cp running to copy things off of the Data drive to an external usb for safety's sake.
syslog:
8/26/12 7:46:56.322 PM com.apple.backupd[4449]: Starting automatic backup
8/26/12 7:46:58.576 PM com.apple.backupd[4449]: Backing up to: /Volumes/Time Machine/Backups.backupdb
8/26/12 7:47:05.840 PM com.apple.backupd[4449]: Forcing deep traversal on source: "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
8/26/12 7:47:06.009 PM com.apple.backupd[4449]: Using file event preflight for Fast
8/26/12 7:47:07.420 PM com.apple.backupd[4449]: Will copy (207 KB) from Fast
8/26/12 7:47:07.421 PM com.apple.backupd[4449]: Using file event preflight for Video
8/26/12 7:47:07.421 PM com.apple.backupd[4449]: Will copy (Zero KB) from Video
8/26/12 7:47:07.733 PM com.apple.backupd[4449]: Deep event scan at path:/Volumes/Data reason:must scan subdirs|require scan|
8/26/12 7:47:07.733 PM com.apple.backupd[4449]: Finished scan
8/26/12 7:47:25.056 PM com.apple.backupd[4449]: Found 2112 files (26.2 MB) needing backup
8/26/12 7:47:25.064 PM com.apple.backupd[4449]: 1.92 GB required (including padding), 2.46 TB available
8/26/12 7:48:31.092 PM com.apple.backupd[4449]: Copied 1258 files (4.3 MB) from volume Fast.
8/26/12 7:48:36.552 PM com.apple.backupd[4449]: Copied 1264 files (4.3 MB) from volume Video.
8/26/12 7:57:01.251 PM com.apple.backupd[4449]: Copied 3328 files (29.6 MB) from volume Data.
8/26/12 7:57:01.571 PM com.apple.backupd[4449]: Using file event preflight for Fast
8/26/12 7:57:02.468 PM com.apple.backupd[4449]: Will copy (46 KB) from Fast
8/26/12 7:57:19.956 PM com.apple.backupd[4449]: Found 2088 files (26.1 MB) needing backup
8/26/12 7:57:19.957 PM com.apple.backupd[4449]: 1.92 GB required (including padding), 2.41 TB available
8/26/12 7:58:04.441 PM com.apple.backupd[4449]: Copied 428 files (263 KB) from volume Fast.
8/26/12 7:58:15.160 PM com.apple.backupd[4449]: Copied 434 files (263 KB) from volume Video.
8/26/12 8:06:45.605 PM com.apple.backupd[4449]: Copied 2498 files (25.6 MB) from volume Data.
8/26/12 8:06:55.112 PM com.apple.backupd[4449]: Created new backup: 2012-08-26-200653
8/26/12 8:07:26.837 PM com.apple.backupd[4449]: Starting post-backup thinning
8/26/12 8:07:26.837 PM com.apple.backupd[4449]: No post-back up thinning needed: no expired backups exist
8/26/12 8:07:26.882 PM com.apple.backupd[4449]: Backup completed successfully.
.Backup.log
2012-08-26-19:47:05 - Starting backup
Previous snapshot:
/Volumes/Time Machine/Backups.backupdb/Peter Drier’s Mac Pro/2012-08-26-192548
Date of Previous snapshot: 1346023548470589
Will use FS events for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Gathering events since 7162257515116441245.
Will use FS events for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Gathering events since 7162257515113311785.
Will traverse "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
=== Starting backup loop #1 ===
Will use IncrementalBackupCopier
Running preflight for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Calculating size of changes
Should copy 48 items (207 KB) representing 50 blocks of size 4096. 600903601 blocks available.
Preflight complete for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Time elapsed: 1.412 seconds
Running preflight for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Calculating size of changes
Should copy 48 items (207 KB) representing 50 blocks of size 4096. 600903601 blocks available.
Preflight complete for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Time elapsed: 0.001 seconds
Running preflight for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Scanning nodes needing deep traversal
Deep event scan at path: /Volumes/Data reason:must scan subdirs|require scan|
Calculating size of changes
Should copy 2112 items (26.2 MB) representing 6400 blocks of size 4096. 600528095 blocks available.
Preflight complete for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Time elapsed: 17.634 seconds
Processing preflight info
Space needed for this backup: 1.92 GB (468018 blocks of size 4096)
Preserving last snapshot /Volumes/Time Machine/Backups.backupdb/Peter Drier’s Mac Pro/2012-08-26-192548
Finished processing preflight info
Copying items from "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Finished copying items for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Time elapsed: 1 minute, 6.000 seconds
Copied 1258 items (4.3 MB)
Gathering events since 7162257515117251301.
Needs new backup due to change in /private/var/db/.dat1161.001
Copying items from "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Finished copying items for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Time elapsed: 4.589 seconds
Copied 1264 items (4.3 MB)
Gathering events since 7162257515113311785.
Copying items from "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Finished copying items for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Time elapsed: 8 minutes, 24.000 seconds
Copied 3328 items (29.6 MB)
=== Starting backup loop #2 ===
Will use IncrementalBackupCopier
Running preflight for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Calculating size of changes
Should copy 23 items (46 KB) representing 11 blocks of size 4096. 588570106 blocks available.
Preflight complete for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Time elapsed: 0.898 seconds
Running preflight for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Calculating size of changes
Should copy 24 items (46 KB) representing 11 blocks of size 4096. 588550912 blocks available.
Preflight complete for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Time elapsed: 1.407 seconds
Running preflight for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Calculating size of changes
Should copy 2088 items (26.1 MB) representing 6360 blocks of size 4096. 588164391 blocks available.
Preflight complete for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Time elapsed: 16.080 seconds
Processing preflight info
Space needed for this backup: 1.92 GB (468003 blocks of size 4096)
Preserving last snapshot /Volumes/Time Machine/Backups.backupdb/Peter Drier’s Mac Pro/2012-08-26-194705.inProgress/220D224E-57C5-4AE7-ACC9-B362141889D7
Finished processing preflight info
Copying items from "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Finished copying items for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Time elapsed: 44.483 seconds
Copied 428 items (263 KB)
Gathering events since 7162257515117277992.
Needs new backup due to change in /Users/drierp/Library/Messages/chat.db-wal
Copying items from "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Finished copying items for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Time elapsed: 10.449 seconds
Copied 434 items (263 KB)
Gathering events since 7162257515113311785.
Copying items from "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Finished copying items for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Time elapsed: 8 minutes, 30.000 seconds
Copied 2498 items (25.6 MB)
Some filesystem changes made during the course of the backup may not be accounted for. Still busy after 2 retries.
Backup complete.
Total time elapsed: 19 minutes, 47.000 seconds -
Have many digitized slides requiring to be flipped or mirrored. Can't seem to find the method to do it in iPhoto.
Any suggestions appreciated to help me edit these photos.You can do this with Preview, or with any external editor
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto. -
How to SCAN uploaded files for VIRUS in APEX
part 1:
Goal:
Do a virus scan of the uploaded file from APEX application prior to storing the file in custom tables.
The process:
Followed the document from www.developer.com:
Implementing an Anti-Virus File Scan in JEE Applications
By Vlad Kofman
Go to page: 1 2 3 Next
This article will discuss one of the ways to implement antivirus file scanning in Java, particular in the JEE applications. Viruses, Trojan Horses, and different malware and spyware are a real problem for current computer environments, and especially for the Windows operating system. If you are designing any application in Java that has a requirement to be able to upload external files, you have a potential security risk. By uploading, I mean any way to get the external file inside of the corporate firewall be it via HTTP protocol or any other means. It is quite common to have this type of requirement in an enterprise application and with Java being one of the most popular web development platforms, it is unfortunate that this type of gaping security risk is quite often overlooked.
Java's Development Kit (JDK) does not have any means to do the antivirus scan right out of the box. This is primarily because Java is a programming language, and does not have any virus scanning packages. Furthermore, anti-virus software is not Sun's area of expertise or business model. Developing this type of software (or Java package), and more importantly maintaining it, would be a huge task for Sun. Mainly because viruses are constantly evolving and keeping virus definitions up-to-date is a daunting task. Large companies such as McAffee, Symantec, or Zone Labs develop virus detecting and combating products and spend a lot of resources to maintain them.
Application Environment
To implement a virus file scan in Java, a third-party package needs to be used. For the purposes of this article, I will use Symantec Scan Engine (SSE) package, which comes with Java APIs. This package is an application that serves as a TCP/IP server and has a programming interface and enables Java applications to incorporate support for content scanning technologies. For this article, I used Symantec Scan Engine 5.1, which is available as a Unix or Windows install.
If you are using an anti-virus package from the different vendor, you will need to investigate what kind of APIs are available; however, the general approach should be similar. Also, note that my implementation can be used with JEE technology and any modern MVC framework such as Struts or Spring.
The architecture is as follows: A server machine needs to have SSE running at all times. This can be the same machine that hosts your Application Server, but in an enterprise environment this should be a different machine. The Default Port needs to be open through the firewall to allow communication with the scan engine. All JEE applications that need to do file scanning can talk to the SSE server machine through a default port. Also, multiple applications running on different application servers can re-use the same scanning server. For more information, you should refer to the Symantec Scan Engine (SSE) Installation Guide, available on the Symantec web site.
When an external file that needs to be scanned is sent to the SSE via its programming interface (Java APIs using the default port), before any other operation on the file is performed, the SSE returns a result code. For instance, a file is uploaded by an external user into the web email type application as an attachment; then, the SSE API is invoked by the application and the return code of pass or fail determines the outcome of the upload and whether that email can actually be sent. If you have an account on Yahoo mail, you probably have seen that Yahoo is using Norton Antivirus to scan all attachments, although no Java.
Click here for a larger image.
Figure 1: Screen shot from Yahoo
For details on the Scan Engine Server Installationm please see the Symantec Scan Engine (SSE) Implementation Guide from Symantec.
Here are some key things to remember about SSE:
• Java 2 SE Runtime (JRE) 5.0 Update 6.0 or later must be installed on the server before the SSE installation is done.
• After installation, verify that the Symantec Scan Engine daemon is running. At the Unix command prompt (if it's a Unix install), type the following command:
ps –ea | grep sym.
A list of processes similar to the following should appear:
o 5358 ? 0:00 symscan
o 5359 ? 0:00 symscan
If nothing is displayed the SSE process did not start.
If the SSE process did not start, type the following command to restart SSE:
/etc/init.d/symscan restart
• Keeping the virus definition up to date is the most important task and if new updates are not installed, the whole scan becomes ineffective. Symantec automatically downloads the most current file definitions through LiveUpdate. Please make sure that firewall rules are in place to allow the host server to connect to the Symantec update service.
Project Setup
For the purposes of this article, I included a wrapper for the Symantec SSE APIs, av.jar, which has Symantec Java APIs and serves as a client to the SSE server and takes care of all communications with the server. Please refer to the download source section. The av.jar should be included in the Java CLASSPATH to work with the SSE. This jar contains a class called AVClient that takes care of actually sending the files to SSE as byte arrays and returning the result.
In my project setting, I added three variables to be accessed via the System.getProperty mechanism. For example:
AV_SERVER_HOST=192.168.1.150
AV_SERVER_PORT=1344
AV_SERVER_MODE=SCAN
The AV_SERVER_HOST is the host name or IP of the machine where Scan Engine is installed.
The AV_SERVER_PORT is the port where Scan Engine listens for incoming files.
The AV_SERVER_MODE is the scan mode which can be:
• NOSCAN: No scanning will be done (any keyword that does not start with "SCAN" will result in ignoring the call to the Scan Engine and no files will be transferred for scanning).
• SCAN: Files or the byte stream will be scanned, but the scan engine will not try to repair infections.
• SCANREPAIR: Files will be scanned, the scan engine will try to repair infections, but nothing else will be done.
• SCANREPAIRDELETE: Files will be scanned, the scan engine will try to repair infections, and irreparable files will be deleted.
Note: For the file stream (byte array) scanning, the only meaning full values are "SCAN" and "NOSCAN".
Using the SSE Scanning Java APIs
In any class where scan is required, call the scanning API provided in the AVClient object located in the av.jar. The AVClient object will establish connection to the Scan Engine server and has the following APIs:
Figure 2: The significant APIs for the communication with to the Scan Engine Server.
If scanning a file on the file system, in SCAN only mode, use the call that accepts filename only.
If scanning a file on the file system, with SCANREPAIR or SCANREPAIRDELETE, use the call that accepts input and output file names.
If scanning an in-memory file (byte array), use the call accepting byte array.
For example:
import com.av.*;
Initialize setup parameters:
static String avMode =
(System.getProperty("AV_SERVER_MODE") != null)
? (String) System.getProperty("AV_SERVER_MODE") : "NOSCAN";
static boolean scan = avMode.startsWith("SCAN");
static String avServer =
(String) System.getProperty("AV_SERVER_HOST");
static int avPort =
Integer.parseInt( (String) System.getProperty("AV_SERVER_PORT"));
Scan check example for an in-memory file byte array:
public void scanFile(byte[] fileBytes, String fileName)
throws IOException, Exception {
if (scan) {
AVClient avc = new AVClient(avServer, avPort, avMode);
if (avc.scanfile(fileName, fileBytes) == -1) {
throw new VirusException("WARNING: A virus was detected in
your attachment: " + fileName + "<br>Please scan
your system with the latest antivirus software with
updated virus definitions and try again.");
Note that if you are using this code inside of the MVC handler, you can throw a custom VirusException and check for it in the calling method and perform any necessary cleanup. I have included the class in the AV Jar as well.
For example:
catch (Exception ex) {
logger.error(ex);
if (ex instanceof VirusException) {
// do something here
else {
// there was some other error – handle it
For more details on the Scan Engine Client API, please see Symantec Scan Engine Software Developers Guide.
Continuation in part2part 4:
c) Clienttester.java – This is the gui app set to test if the configuration is working or not. This gui uses the method scanfile(inputfile, outputfile) as you can see the result in the outputpane of the jframe.
* clienttester.java
* Created on April 12, 2005, 2:37 PM
* @author george_maculley
package com.av;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class clienttester
implements ActionListener {
// private String ipaddress = "127.0.0.1";
private String ipaddress = "199.209.150.58";
//private String ipaddress = "192.168.0.55";
static JFrame frame;
JFileChooser chooser = new JFileChooser();
TextField pathtofile = new TextField(System.getProperty("user.home"), 30);
// TextField pathtooutfile= new TextField(System.getProperty("user.home"),30);
private int port = 1344;
JButton filechooser = new JButton("Browse to file"); ;
private String originalfilename;
private String outputfilename;
JButton scanbutton = new JButton("Scan");
TextArea outputarea = new TextArea(20, 40);
TextField iptext = new TextField("127.0.0.1", 16);
TextField porttext = new TextField("1344", 5);
AVClient mine;
JRadioButton choosescan = new JRadioButton("SCAN");
// JRadioButton choosedelete= new JRadioButton("SCANREPAIRDELETE");
/** Creates a new instance of gui */
public clienttester() {
public clienttester(java.lang.String ip, java.lang.String infile, java.lang.String outfile, int port) {
this.ipaddress = ip;
this.port = port;
this.originalfilename = infile;
this.outputfilename = outfile;
boolean setValues(java.lang.String ip, java.lang.String infile, java.lang.String outfile, int port) {
this.ipaddress = ip;
this.port = port;
this.originalfilename = infile;
this.outputfilename = outfile;
return (true);
public void actionPerformed(java.awt.event.ActionEvent actionEvent) {
JComponent c = (JComponent) actionEvent.getSource();
if (c == filechooser) {
int retval = chooser.showDialog(frame, null);
if (retval == JFileChooser.APPROVE_OPTION) {
File theFile = chooser.getSelectedFile();
if (theFile != null) {
pathtofile.setText(theFile.getPath());
// pathtooutfile.setText(theFile.getPath());
JOptionPane.showMessageDialog(frame, "You chose this file: " + theFile.getPath());
if (c == scanbutton) {
//return object that can be passed to AVClient
String policy;
int thisport;
int scanresult;
String thisip;
String inputfile;
String outputfile;
outputarea.append("Server: " + iptext.getText() + "\r\n");
if (choosescan.isSelected()) {
policy = "SCAN";
else {
policy = "SCANREPAIRDELETE";
thisport = new Integer(porttext.getText()).intValue();
thisip = iptext.getText();
//mine= new AVClient(iptext.getText(),porttext.getText(),policy);
mine = new AVClient(iptext.getText(), thisport, policy);
if (mine.test() == 1) {
outputarea.append("Sorry. Incorrect parameters specified.\r\n");
System.exit(1);
else {
outputarea.append("Connection to SAVSE initialized.\r\n");
inputfile = pathtofile.getText();
// outputfile=pathtooutfile.getText();
outputfile = "/tmp";
outputarea.append("Scanning file " + inputfile + " \r\n");
if (policy == "SCAN") {
scanresult = mine.scanfile(inputfile);
else {
scanresult = mine.scanfile(inputfile, outputfile);
if (scanresult == 0) {
outputarea.append("File is clean.\r\n");
else if (scanresult == -1) {
outputarea.append("File is infected. \r\n");
else {
outputarea.append("Scan error.\r\n");
void display() {
Frame f = new Frame("SAVSE JAVA ICAP Client");
f.setLayout(new GridLayout(1, 2));
JPanel lpanel = new JPanel(new GridLayout(7, 1));
JPanel ippanel = new JPanel();
JPanel portpanel = new JPanel();
JPanel rpanel = new JPanel();
JPanel outputpanel = new JPanel();
JPanel buttonpanel = new JPanel();
JPanel pathpanel = new JPanel();
// JPanel outpathpanel= new JPanel();
JPanel policypanel = new JPanel();
ButtonGroup policygroup = new ButtonGroup();
filechooser.addActionListener(this);
scanbutton.addActionListener(this);
choosescan.setSelected(true);
policygroup.add(choosescan);
// policygroup.add(choosedelete);
buttonpanel.setBorder(BorderFactory.createTitledBorder("Scan Policy"));
buttonpanel.add(choosescan);
// buttonpanel.add(choosedelete);
pathpanel.setBorder(BorderFactory.createTitledBorder("Path to File"));
pathpanel.add(pathtofile);
f.setSize(new Dimension(650, 400));
f.setBackground(Color.white);
f.setResizable(true);
ippanel.setBorder(BorderFactory.createTitledBorder("SAVSE IP Address"));
ippanel.add(iptext);
outputpanel.setBorder(BorderFactory.createTitledBorder("OUTPUT"));
outputpanel.add(outputarea);
portpanel.setBorder(BorderFactory.createTitledBorder("ICAP Port"));
portpanel.add(porttext);
// outpathpanel.setBorder(BorderFactory.createTitledBorder("Path to Repair File"));
// outpathpanel.add(pathtooutfile);
lpanel.add(ippanel);
rpanel.add(outputpanel);
lpanel.add(portpanel);
lpanel.add(buttonpanel);
lpanel.add(pathpanel);
// lpanel.add(outpathpanel);
lpanel.add(filechooser);
lpanel.add(scanbutton);
f.add(lpanel);
f.add(rpanel);
f.setVisible(true);
public static void main(String[] args) {
clienttester g = new clienttester();
g.display();
d) my2.java – This is the class file I wrote to test that I am able to send a file and scan it and see the output in the JDEVELOPER. In this case the file is stored on the filesystem of the client machine. JDEVELOPER should be able to see the file.
NOTE:
“EICAR.com” is the test file downloaded from Symantec site to test a non malicious virus file. I n order to be able to test it like this, the Antivirus program running on your machine should be disabled, or else Antivirus will kick in and delete the file. In the first place you will not be able to download the test virus file either with anti virus running on the machine you are downloading to.
package com.av;
import java.io.*;
public class my2 {
static int my_return = 0;
* @param fileBytes
* @param fileName
* @return
public static int scanfile(String fileName){
String avMode = "SCAN";
boolean scan = avMode.startsWith("SCAN");
String avServer = "xx";--avserver ip address
int avPort = 1344;
int the_return = 0;
if (scan) {
AVClient avc = new AVClient(avServer,avPort,avMode);
the_return = avc.scanfile(fileName);
if (the_return == -1) {
return (the_return);
} else
return (the_return);
//my_return = the_return;
return (the_return);
public static void main(String[] args) throws Exception {
System.out.println("Hi there in Main");
byte[] b1 = new byte[4];
b1[1] = 68;
my_return = scanfile("c:\\eicar.com");
System.out.println(my_return);
e) Then finally we have my1.JAVA, which takes the filename, and it’s contents in the bytes form and scans the file. The reason for this method is we are not storing the file on the filesystem, it is read into the memory and only if it is clean, it is put into the database or else notify the user.
package com.av;
import java.io.*;
public class my1 {
static int my_return = 0;
static int a_length = 0;
* @param fileBytes
* @param fileName
* @return
public static int scanfile(String fileName,byte[] fileBytes) throws IOException {
String avMode = "SCAN";
boolean scan = avMode.startsWith("SCAN");
String avServer = "xxx";--avserver’s ip address
int avPort = 1344;
int the_return = 0;
if (scan) {
AVClient avc = new AVClient(avServer,avPort,avMode);
// File file = new File(fileName) ;
//byte[] fBytes = getBytesFromFile(file);
the_return = avc.scanfile(fileName, fileBytes);
if (the_return == -1) {
return (the_return);
} else
{return (the_return);}
my_return = the_return;
return (the_return);
// Returns the contents of the file in a byte array.
* @param file
* @return
* @throws IOException
public static byte[] getBytesFromFile(File file) throws IOException {
InputStream is = new FileInputStream(file);
// Get the size of the file
long length = file.length();
// You cannot create an array using a long type.
// It needs to be an int type.
// Before converting to an int type, check
// to ensure that file is not larger than Integer.MAX_VALUE.
if (length > Integer.MAX_VALUE) {
// File is too large
// Create the byte array to hold the data
byte[] bytes = new byte[(int)length];
// Read in the bytes
int offset = 0;
int numRead = 0;
while (offset < bytes.length
&& (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) {
offset += numRead;
// Ensure all the bytes have been read in
if (offset < bytes.length) {
throw new IOException("Could not completely read file "+file.getName());
// Close the input stream and return bytes
is.close();
return bytes;
// public static void main(String[] args) throws Exception {
//System.out.println("Hi there in Main");
// File file = new File() ;
// byte[] b1 = getBytesFromFile(file);
//System.out.println(b1);
// my_return = scanfile(,b1);
//System.out.println(my_return); }
Finally , you have the exceptions file,
e) package com.av;
public class VirusException
extends Exception {
public VirusException() {
super();
public VirusException(String text) {
super(text);
Once you have all these classes, you can use JDEVELOPER , to load these classes into the database: This is as follows:
Right click on the project, which has all these classes.
NEW -> deployment profiles -> load java and stored procedures.
When you are created deployment profile, you have to specify,
Loadjava options.
-f, -v (check the check boxes)
Under privileges:
-s – specify database schema these classes are loaded into
-s – create sysnonym check box
-g – grant to public or any specific users per your policy.
Under Resolver,
-r and –o (check the check boxes)
I accepted the default name storedproc1. Then you right click on the storedproc1.deploy, deploy to whichever database connection you created.
And then, In order to access this java class we need a pl/sql wrapper as follows:
create or replace package my1 is
function mycheck (pfilename in varchar2, psize in number)
return number;
end my1;
create or replace package body my1 is
function mycheck (pfilename in varchar2, psize in number)
return number is
language java
name 'com.av.my1.scanfile(java.lang.String, byte[]) return int';
end my1;
And the code is invoked from sql plus as follows:
Select my1.mycheck(“filename”, “filebytes”) from dual;
One important catch in the above method is to send the filename and filecontents in bytes form. In order to send the file contents as filebytes, you will need another java class and load into the data base as described above.
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStream;
* This program demonstrates how to read a file into a byte array. This method
* reads the entire contents of the file into a byte array.
* @version 1.0
* @author Jeffrey M. Hunter ([email protected])
* @author http://www.idevelopment.info
public class ReadFileIntoByteArray {
* method to convert a byte to a hex string.
* @param data the byte to convert
* @return String the converted byte
public static String byteToHex(byte data) {
StringBuffer buf = new StringBuffer();
buf.append(toHexChar((data >>> 4) & 0x0F));
buf.append(toHexChar(data & 0x0F));
return buf.toString();
* Convenience method to convert an int to a hex char.
* @param i the int to convert
* @return char the converted char
public static char toHexChar(int i) {
if ((0 <= i) && (i <= 9)) {
return (char) ('0' + i);
} else {
return (char) ('a' + (i - 10));
* Returns the contents of the file in a byte array
* @param file File this method should read
* @return byte[] Returns a byte[] array of the contents of the file
private static byte[] getBytesFromFile(File file) throws IOException {
InputStream is = new FileInputStream(file);
System.out.println("\nDEBUG: FileInputStream is " + file);
// Get the size of the file
long length = file.length();
System.out.println("DEBUG: Length of " + file + " is " + length + "\n");
* You cannot create an array using a long type. It needs to be an int
* type. Before converting to an int type, check to ensure that file is
* not loarger than Integer.MAX_VALUE;
if (length > Integer.MAX_VALUE) {
System.out.println("File is too large to process");
return null;
// Create the byte array to hold the data
byte[] bytes = new byte[(int)length];
// Read in the bytes
int offset = 0;
int numRead = 0;
while ( (offset < bytes.length)
( (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) ) {
offset += numRead;
// Ensure all the bytes have been read in
if (offset < bytes.length) {
throw new IOException("Could not completely read file " + file.getName());
is.close();
return bytes;
* @param filename
public static byte[] chk_file(String filename) {
byte[] fileArray = null;
try {
fileArray = getBytesFromFile(new File( filename));
} catch (IOException e) {
e.printStackTrace();
if (fileArray != null) {
for (int i=0; i<fileArray.length; i++) {
System.out.println(
"fileArray[" + i + "] = " +
((int)fileArray[i] < 9 ? " " : "") +
( ((int)fileArray[i] > 9 && (int)fileArray[i] <= 99) ? " " : "") +
fileArray[i] + " : " +
" HEX=(0x" + byteToHex(fileArray) + ") : " +
" charValue=(" + (char)fileArray[i] + ")");
return fileArray;
* Sole entry point to the class and application.
* @param args Array of String arguments.
public static void main(String[] args) {
byte[] fileArray = null;
try {
fileArray = getBytesFromFile(new File("c:\\eicar.com"));
} catch (IOException e) {
e.printStackTrace();
if (fileArray != null) {
for (int i=0; i<fileArray.length; i++) {
System.out.println(
"fileArray[" + i + "] = " +
((int)fileArray[i] < 9 ? " " : "") +
( ((int)fileArray[i] > 9 && (int)fileArray[i] <= 99) ? " " : "") +
fileArray[i] + " : " +
" HEX=(0x" + byteToHex(fileArray[i]) + ") : " +
" charValue=(" + (char)fileArray[i] + ")");
Having main method helps you to run the file in JDEVELOPER or using JAVA.
DO not forget to load this class into the database.
And you create the pl/sql wrapper again as follows:
create or replace FUNCTION TOBY (pfilename in varchar2) RETURN VARCHAR2 iS
language java name
'ReadFileIntoByteArray.chk_file(java.lang.String) return byte[]';
And you call the function from sqlplus as follows:
Sql>Set serveroutput on size 20000;
Sql> call dbms_java.set_output(20000);
Sql> Select toby(“filename”) from dual; --
this file should be accessible, I mean you will not be able to send a file on your pc, from sql plus as sql/plus is running on your db server.
You will be able to see the output in sql plus:
If you are running it from the APEX:
When we use file browser widget from APEX, the file is stored in APEX_APPLICATION_FILES table. And we retrieve that into a variable and pass this variable to the function as follows:
DECLARE
scan_failed EXCEPTION;
x varchar2(400);
z number;
BEGIN
select filename into x from wwv_flow_files where name = :P1_FILE_NAME;
select my1.mycheck(x,toby(x)) into z from dual;
if z = 0 then
:P1_SUBJECT:= 'PASSED';
else
:P1_SUBJECT:= 'FAILED';
end if;
:P1_SCAN_RESULT := '** Scanning File **';
IF UPPER(:P1_SUBJECT) = 'PASSED' THEN
BEGIN
:P1_SCAN_FLAG := 'PASSED';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** File passed scan **';
END;
ELSIF UPPER(:P1_SUBJECT) = 'FAILED' THEN
BEGIN
:P1_SCAN_FLAG := 'FAILED';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** File failed scan **';
END;
ELSE
BEGIN
:P1_SCAN_FLAG := 'UNKNOWN';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** Scan Is Not Conclussive **';
END;
END IF;
--IF :P1_SCAN_FLAG = 'FAILED'
-- THEN RAISE scan_failed;
--END IF;
EXCEPTION
WHEN OTHERS THEN
DELETE from APEX_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
RAISE_APPLICATION_ERROR (-20000, 'seb OTHERS error encountered - file upload not allowed. Possible virus detected !');
raise;
END;
ACKNOWLEDMENTS:
1) JOHN SCOTT – who suggested this ICAP API in one of the threads which is my initial starting point in this direction.
2) VLAD KOFMAN who wrote the article on WWW.DEVELOPER.com
3) Mr. KIRAN –One of the engineers from Metalink, who helped me at every step of getting this java programs and pl/sql wrappers working. But for him, I would have not completed my project. -
[SOLVED] Can't Scan with HP OfficeJet 4500
My cups says at http://localhost:631/printers/HP_Officejet_4500_G510g-m this:
HP_Officejet_4500_G510g-m
HP_Officejet_4500_G510g-m (Idle, Accepting Jobs, Not Shared)
Description: HP Officejet 4500 G510g-m
Location:
Driver: HP Officejet 4500 g510g-m hpijs, 3.14.10 (color, 2-sided printing)
Connection: usb://HP/Officejet%204500%20G510g-m?serial=CN21CG201N05CQ&interface=1
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
and it prints fine.
But I can't scan now. I could before. This is what I see in my terminal:
$ sudo hp-check
Saving output in log file: /home/kirk/hp-check.log
HP Linux Imaging and Printing System (ver. 3.14.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if
the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP
supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and
run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: arch distro is not found in AUTH_TYPES
warning: unknown- version is not supported. Using unknown-0 versions dependencies to verify and install...
| SYSTEM INFO |
Kernel: 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 GNU/Linux
Host: arch
Proc: 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 GNU/Linux
Distribution: unknown
Bitness: 64 bit
| HPLIP CONFIGURATION |
HPLIP-Version: HPLIP 3.14.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.14.10
html=/usr/share/doc/hplip-3.14.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.14.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: No such file or directory
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
| External Dependencies |
policykit Admin-Policy-framework OPTIONAL - 0.112 OK -
gs Ghostscript REQUIRED 7.05 9.15 OK -
network Network-wget OPTIONAL - 1.16 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.24 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus REQUIRED - 1.8.10 OK -
cups CUPS REQUIRED 1.1 2.0.1 OK 'CUPS Scheduler is running'
xsane SANE-GUI OPTIONAL 0.9 0.999 OK -
| General Dependencies |
error: reportlab Python-PDF-Lib OPTIONAL 2.0 - MISSING 'reportlab needs to be installed'
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
error: pil Python-Image-Lib OPTIONAL - - MISSING 'pil needs to be installed'
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.11.3 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.20 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
python-devel Python-SDK REQUIRED 2.2 3.4.2 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.11.3 OK -
cups-devel CUPS-SDK REQUIRED - 2.0.1 OK -
sane-devel SANE-SDK REQUIRED - 1.0.24 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.24 OK -
cups-image CUPS-Image-Lib REQUIRED - 2.0.1 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
| Compile Time Dependencies |
gcc gcc-Compiler REQUIRED - 4.9.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 4.1 OK -
| Python Extentions |
cupsext CUPS-Extension REQUIRED - 3.14.10 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.10 OK -
hpmudext IO-Extension REQUIRED - 3.14.10 OK -
| Scan Configuration |
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.10 OK -
| DISCOVERED SCANNER DEVICES |
/^Cerror: User exit
Done.
I kill it because it just hangs. The issue appears to be "reportlab needs to be installed" but I beleve I have all the packages installed:
$ sudo pacman -Qs pyth
local/cython 0.21.1-1
C-Extensions for Python
local/gnome-python 2.28.1-9
PyGNOME Python extension module
local/libftdi 1.2-1
A library to talk to FTDI chips, optional python bindings.
local/libreoffice-still-common 4.2.7-2 (libreoffice-still)
Common files for LibreOffice maintenance branch
local/pygtk 2.24.0-5
Python bindings for the GTK widget set
local/pygtksourceview2 2.10.1-5
Python bindings for gtksourceview2
local/pyorbit 2.24.0-5
Python bindings for ORBit2
local/pyqt4-common 4.11.3-1
Common PyQt files shared between python-pyqt4 and python2-pyqt4
local/python 3.4.2-1
Next generation of the python high-level scripting language
local/python-atspi 2.12.0-1
Python 3 bindings for at-spi
local/python-bsddb 6.0.1-3
Python interface for BerkeleyDB
local/python-cairo 1.10.0-4
Python bindings for the cairo graphics library
local/python-dbus 1.2.0-4
Python 3.3 bindings for DBUS
local/python-dbus-common 1.2.0-4
Common dbus-python files shared between python-dbus and python2-dbus
local/python-gobject 3.14.0-2
Python 3 bindings for GObject
local/python-pyqt4 4.11.3-1
A set of Python 3.x bindings for the Qt toolkit
local/python-reportlab 3.1.8-1
A proven industry-strength PDF generating solution
local/python-setuptools 1:7.0-1
Easily download, build, install, upgrade, and uninstall Python packages
local/python-sip 4.16.4-1
Python 3.x SIP bindings for C and C++ libraries
local/python-xdg 0.25-2
Python library to access freedesktop.org standards
local/python-xlib 0.15rc1-6
A fully functional X client library for Python programs
local/python2 2.7.8-2
A high-level scripting language
local/python2-beaker 1.6.4-2
Caching and sessions WSGI middleware for use with web applications and stand-alone Python scripts and applications
local/python2-bonobo 2.28.1-9
Python bindings for interacting with Bonobo
local/python2-boto 2.34.0-1
A Python interface to Amazon Web Services (AWS)
local/python2-bsddb 6.0.1-3
Python interface for BerkeleyDB
local/python2-cairo 1.10.0-2
Python2 bindings for the cairo graphics library
local/python2-crypto 2.6.1-2
Collection of cryptographic algorithms and protocols, implemented for use from Python 2.
local/python2-dbus 1.2.0-4
Python 2.7 bindings for DBUS
local/python2-distutils-extra 2.38-2
Enhancements to the Python build system
local/python2-ecdsa 0.11-2
Implementation of ECDSA in Python
local/python2-gconf 2.28.1-9
Python bindings for interacting with GConf
local/python2-gnomecanvas 2.28.1-9
Python bindings for the GNOME Canvas
local/python2-gnomekeyring 2.32.0-15
Python bindings for libgnome-keyring
local/python2-gnomevfs 2.28.1-9
Python bindings for interacting with gnome-vfs
local/python2-gnupginterface 0.3.2-2
A Python interface to GNU Privacy Guard (GnuPG).
local/python2-gobject 3.14.0-2
Python 2 bindings for GObject
local/python2-gobject2 2.28.6-11
Python 2 bindings for GObject2
local/python2-keybinder2 0.3.0-2
Library for registering global keyboard shortcuts - Python 2 bindings
local/python2-keyring 4.0-2
Store and access your passwords safely.
local/python2-libgnome 2.28.1-9
Python bindings for libgnome
local/python2-lockfile 0.10.2-1
Platform-independent file locking module
local/python2-mako 1.0.0-1
Hyperfast and lightweight templating for the Python2 platform
local/python2-markupsafe 0.23-1
Implements a XML/HTML/XHTML Markup safe string for Python
local/python2-notify 0.1.1-13
Python bindings for libnotify
local/python2-numpy 1.9.1-1
Scientific tools for Python
local/python2-paramiko 1.15.1-1
Python module that implements the SSH2 protocol
local/python2-pyqt4 4.11.3-1
A set of Python 2.x bindings for the Qt toolkit
local/python2-pysqlite 2.6.3-4
A Python DB-API 2.0 interface for the SQLite embedded relational database engine
local/python2-sip 4.16.4-1
Python 2.x SIP bindings for C and C++ libraries
local/python2-wnck 2.32.0-15
Python bindings for libwnck
local/python2-xdg 0.25-2
Python library to access freedesktop.org standards
local/sip 4.16.4-1
A tool that makes it easy to create Python bindings for C and C++ libraries
local/wxpython 3.0.2.0-1
A wxWidgets GUI toolkit for Python
and I just reinstalled some and rebooted.
I am a bit lost as to what's wrong.
Last edited by CaptainKirk (2014-12-05 12:23:09)In reality I couldn't print either. Not sure what really fixed it, but it seemed that adding hpoj from AUR and rebooting did it. I then readded the printer and now all works.
-
I was emailed a scanned document and am having trouble trying to edit it in Preview. Do I need to download software to edit it, even if its not from a scanner attached to my computer? If I have to, are there any free applications or is Vuescan the only option? I doubt I would use it very often to justify buying it.
thanks.To truly edit text in a scanned document requires using OCR software. VueScan is probably the least expensive alternative. To OCR a PDF image file you can try PDF Pen Pro - both at VersionTracker or MacUpdate.
-
Why the full table scans in this query on a complex view?
Does someone have an idea of why the FTSs are in here? As I mentioned before, it seems to be using the indexes where I figured it would. I just don't see why it needs to FTS ALL tables involved in the view to put the combined result sets together.
Thanks
Here's the plan
PLAN_TABLE_OUTPUT
Plan hash value: 4040654044
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 3060 | 116K| 1404 (2)| 00:00:17 |
|* 1 | FILTER | | | | | |
| 2 | VIEW | V_MOD2_V3 | 305K| 11M| 1259 (2)| 00:00:16 |
| 3 | UNION-ALL | | | | | |
| 4 | TABLE ACCESS FULL | MOD_TAB1 | 101K| 4880K| 420 (2)| 00:00:06 |
| 5 | TABLE ACCESS FULL | MOD_TAB2 | 101K| 4880K| 420 (2)| 00:00:06 |
| 6 | TABLE ACCESS FULL | MOD_TAB3 | 101K| 4880K| 420 (2)| 00:00:06 |
|* 7 | VIEW | V_MOD2_V3 | 3 | 156 | 6 (0)| 00:00:01 |
| 8 | UNION-ALL | | | | | |
|* 9 | TABLE ACCESS BY INDEX ROWID| MOD_TAB1 | 1 | 53 | 2 (0)| 00:00:01 |
|* 10 | INDEX UNIQUE SCAN | MOD_TAB1_PK | 1 | | 1 (0)| 00:00:01 |
|* 11 | TABLE ACCESS BY INDEX ROWID| MOD_TAB2 | 1 | 53 | 2 (0)| 00:00:01 |
|* 12 | INDEX UNIQUE SCAN | MOD_TAB2_PK | 1 | | 1 (0)| 00:00:01 |
|* 13 | TABLE ACCESS BY INDEX ROWID| MOD_TAB3 | 1 | 53 | 2 (0)| 00:00:01 |
|* 14 | INDEX UNIQUE SCAN | MOD_TAB3_PK | 1 | | 1 (0)| 00:00:01 |
| 15 | SORT AGGREGATE | | 1 | 13 | | |
| 16 | VIEW | V_MOD2_V3 | 219K| 2792K| 139 (6)| 00:00:02 |
| 17 | UNION-ALL | | | | | |
|* 18 | INDEX FAST FULL SCAN | MOD_TAB1_ST_IDX | 101K| 398K| 51 (6)| 00:00:01 |
|* 19 | INDEX FAST FULL SCAN | MOD_TAB2_ST_IDX | 101K| 398K| 52 (6)| 00:00:01 |
|* 20 | INDEX RANGE SCAN | MOD_TAB3_ST_IDX | 16000 | 64000 | 35 (0)| 00:00:01 |
Message was edited by:
GaffAlas, ALL of that was in the original post I put up a few weeks ago. I meant to reply to it in the message you saw but instead I "edited" it and the original post is now gone!
Suffice it to say that the 3 tables that make up the view are identical, have the proper columns indexed and have statistics generated. The view you see the explain plan for is a view that just does a "UNION ALL" of each of the 3 mod_tab tables.
As I figured it would, a query on the view uses the indexes to figure out which rows of each underlying table have data for the result set based on the "where" clause , and that is where you see the index range scan, etc. What I don't understand is the part in bold. Assuming all rows in all tables that make up the view have been indentified by these index range scans, what requires the 3 full table scans at the end? The explain plan in SQL Developer (Raptor) will show why each of the other things is there, but not the full table scans.
I am getting a few hundred result set rows out of 100,000-200,000 rows altogether so I can't imagine a full table scan on any of these underlying tables being the right way to go (and look at the cost in the plan).
Thanks -
I thought I would be able to scan bar codes with my iPad 2 but cannot because it only has a fixed-lens camera. Bar code scanning apps require auto-focus cameras. Can I upgrade the camera within the iPad2 to auto-focus? If not, can I add a peripheral auto-focus camera and plug it in the the usb port?
Your not able to upgrade the camera, it's not really there for photos . Also there is no USB port on the iPad just a cable that connects to you computer.
-
Time Machine backup requires significantly more space than size of hard drive + external
I can't seem to figure out what is going on here. I recently purchased a new Macbook Pro with a 1T SSD hard drive, upgrading from an older MB Pro with a 500 GB hard drive. In the past I've used Time Machine to back up my hard drive and an external hard drive with RAW format photos and video footage that totals 441.56 GB. My internal internal hard drive currently is 487 GB, and I've used a 1TB time machine back up without problem to date.
I used Time Machine to install on the new system and it worked flawlessly, except that the Time Machine backups wouldn't continue. Time Machine--even when left overnight--would get hung up on Preparing Files to Back Up. So, I reformatted the Time Machine disk (lost the old backups) and attempted to back up from scratch. I then got a message that I need 3.37 TB to complete my new Time Machine back up, though the total size of the back up on disk is ~930 GB. I've read that Time Machine needs 20% - 30% overhead on disk to work well, but I can't figure out why it would require 3x the back up size. I'm hesitant to purchase a new 4 TB external hard drive as I suspect this is a software issue. I've tried reformatting the disk twice more (three total), rebooting my computer, etc. but I keep getting the 3.37 TB message. I'm operating Mavericks OS 10.9.4.
I would be grateful for insight on this.
Best,
AlexHi Linc, thanks for taking a look at this problem. I just reinitiated a backup to make sure it's most up-to-date. Without the external hard drive, I was able to complete a simple backup. After plugging the external in again, here's the log I got:
8/6/14 11:34:03.228 PM com.apple.backupd[78806]: Starting automatic backup
8/6/14 11:34:03.660 PM com.apple.backupd[78806]: Backing up to /dev/disk2s2: /Volumes/Time Machine/Backups.backupdb
8/6/14 11:34:04.538 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78808]) Job appears to have crashed: Bus error: 10
8/6/14 11:34:04.538 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:34:04.556 PM ReportCrash[78796]: Saved crash report for MessageCenter[78808] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233404_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:34:10.462 PM com.apple.backupd[78806]: Forcing deep traversal on source: "Media" (device: /dev/disk1s2 mount: '/Volumes/Media' fsUUID: BB6ACCE1-B004-3647-9721-0CE726FAA059 eventDBUUID: 0AC9DC0D-5BE3-4574-94C6-4B041C9C4A26)
8/6/14 11:34:10.469 PM com.apple.backupd[78806]: Deep event scan at path:/Users/Alex/Pictures/Aperture Library.aplibrary/Database/apdb reason:contains changes|must scan subdirs|fsevent|missed reservation|file event|
8/6/14 11:34:10.573 PM com.apple.backupd[78806]: Finished scan
8/6/14 11:34:10.573 PM com.apple.backupd[78806]: Not using file event preflight for Macintosh HD
8/6/14 11:34:14.674 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78820]) Job appears to have crashed: Bus error: 10
8/6/14 11:34:14.674 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:34:14.693 PM ReportCrash[78796]: Saved crash report for MessageCenter[78820] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233414_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:34:24.815 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78821]) Job appears to have crashed: Bus error: 10
8/6/14 11:34:24.815 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:34:24.835 PM ReportCrash[78796]: Saved crash report for MessageCenter[78821] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233424_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:34:34.954 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78822]) Job appears to have crashed: Bus error: 10
8/6/14 11:34:34.954 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:34:34.978 PM ReportCrash[78796]: Saved crash report for MessageCenter[78822] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233434_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:34:45.091 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78823]) Job appears to have crashed: Bus error: 10
8/6/14 11:34:45.091 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:34:45.109 PM ReportCrash[78796]: Saved crash report for MessageCenter[78823] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233445_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:34:55.119 PM ReportCrash[78825]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
8/6/14 11:34:55.242 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78824]) Job appears to have crashed: Bus error: 10
8/6/14 11:34:55.242 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:34:55.275 PM ReportCrash[78825]: Saved crash report for MessageCenter[78824] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233455_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:35:05.377 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78826]) Job appears to have crashed: Bus error: 10
8/6/14 11:35:05.377 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:35:05.395 PM ReportCrash[78825]: Saved crash report for MessageCenter[78826] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233505_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:35:15.514 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78828]) Job appears to have crashed: Bus error: 10
8/6/14 11:35:15.514 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:35:15.533 PM ReportCrash[78825]: Saved crash report for MessageCenter[78828] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233515_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:35:25.653 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78829]) Job appears to have crashed: Bus error: 10
8/6/14 11:35:25.653 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:35:25.672 PM ReportCrash[78825]: Saved crash report for MessageCenter[78829] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233525_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:35:35.789 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78830]) Job appears to have crashed: Bus error: 10
8/6/14 11:35:35.789 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:35:35.809 PM ReportCrash[78825]: Saved crash report for MessageCenter[78830] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233535_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:35:45.923 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78831]) Job appears to have crashed: Bus error: 10
8/6/14 11:35:45.923 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:35:45.942 PM ReportCrash[78825]: Saved crash report for MessageCenter[78831] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233545_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:35:55.950 PM ReportCrash[78833]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
8/6/14 11:35:56.071 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78832]) Job appears to have crashed: Bus error: 10
8/6/14 11:35:56.071 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:35:56.105 PM ReportCrash[78833]: Saved crash report for MessageCenter[78832] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233556_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:36:06.210 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78834]) Job appears to have crashed: Bus error: 10
8/6/14 11:36:06.210 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:36:06.229 PM ReportCrash[78833]: Saved crash report for MessageCenter[78834] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233606_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:36:10.023 PM WindowServer[109]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
8/6/14 11:36:10.135 PM WindowServer[109]: CGXMuxCapture: Starting
8/6/14 11:36:10.136 PM WindowServer[109]: CGXMuxCapture: Acquired
8/6/14 11:36:10.136 PM WindowServer[109]: Display 0x4280882 captured by conn 0xdf03
8/6/14 11:36:14.010 PM WindowServer[109]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280882 device: 0x7f8682f01ec0 isBackBuffered: 1 numComp: 3 numDisp: 3
8/6/14 11:36:16.346 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78836]) Job appears to have crashed: Bus error: 10
8/6/14 11:36:16.346 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:36:16.365 PM ReportCrash[78833]: Saved crash report for MessageCenter[78836] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233616_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:36:19.883 PM WindowServer[109]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 10.86 seconds (server forcibly re-enabled them after 1.00 seconds)
8/6/14 11:36:20.172 PM com.apple.SecurityServer[15]: Killing auth hosts
8/6/14 11:36:20.172 PM com.apple.SecurityServer[15]: Session 100055 destroyed
8/6/14 11:36:20.213 PM WindowServer[109]: CGXMuxCapture: Released
8/6/14 11:36:20.213 PM WindowServer[109]: Display 0x4280882 released by conn 0xdf03
8/6/14 11:36:20.237 PM WindowServer[109]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280882 device: 0x7f8682f01ec0 isBackBuffered: 1 numComp: 3 numDisp: 3
8/6/14 11:36:26.343 PM com.apple.prefs.backup.remoteservice[78837]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
8/6/14 11:36:26.396 PM com.apple.prefs.backup.remoteservice[78837]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
8/6/14 11:36:26.512 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78838]) Job appears to have crashed: Bus error: 10
8/6/14 11:36:26.512 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:36:26.536 PM ReportCrash[78833]: Saved crash report for MessageCenter[78838] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233626_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:36:26.614 PM com.apple.prefs.backup.remoteservice[78837]: Bogus event received by listener connection:
<error: 0x7fff74e8fb50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff74e8fe60> { length = 18, contents = "Connection invalid" }
8/6/14 11:36:30.840 PM iTunes[637]: Entered:_AMMuxedDeviceDisconnected, mux-device:840
8/6/14 11:36:30.840 PM iTunes[637]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:840
8/6/14 11:36:30.841 PM iTunes[637]: tid:1aa47 - Mux ID not found in mapping dictionary
8/6/14 11:36:30.841 PM iTunes[637]: tid:1aa47 - Can't handle disconnect with invalid ecid
8/6/14 11:36:36.647 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78842]) Job appears to have crashed: Bus error: 10
8/6/14 11:36:36.647 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:36:36.666 PM ReportCrash[78833]: Saved crash report for MessageCenter[78842] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233636_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:36:46.781 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78843]) Job appears to have crashed: Bus error: 10
8/6/14 11:36:46.781 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:36:46.800 PM ReportCrash[78833]: Saved crash report for MessageCenter[78843] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233646_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:36:56.814 PM ReportCrash[78845]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
8/6/14 11:36:56.936 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78844]) Job appears to have crashed: Bus error: 10
8/6/14 11:36:56.936 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:36:56.997 PM ReportCrash[78845]: Saved crash report for MessageCenter[78844] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233656_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:37:07.081 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78846]) Job appears to have crashed: Bus error: 10
8/6/14 11:37:07.081 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:37:07.099 PM ReportCrash[78845]: Saved crash report for MessageCenter[78846] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233707_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:37:17.224 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78847]) Job appears to have crashed: Bus error: 10
8/6/14 11:37:17.224 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:37:17.243 PM ReportCrash[78845]: Saved crash report for MessageCenter[78847] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233717_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:37:27.361 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78849]) Job appears to have crashed: Bus error: 10
8/6/14 11:37:27.361 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:37:27.379 PM ReportCrash[78845]: Saved crash report for MessageCenter[78849] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233727_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:37:35.193 PM com.apple.usbmuxd[40]: _SendAttachNotification Device fc:25:3f:70:c5:7c@fe80::fe25:3fff:fe70:c57c._apple-mobdev2._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
8/6/14 11:37:37.496 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78851]) Job appears to have crashed: Bus error: 10
8/6/14 11:37:37.496 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:37:37.515 PM ReportCrash[78845]: Saved crash report for MessageCenter[78851] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233737_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:37:47.636 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78852]) Job appears to have crashed: Bus error: 10
8/6/14 11:37:47.636 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:37:47.656 PM ReportCrash[78845]: Saved crash report for MessageCenter[78852] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233747_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:37:57.665 PM ReportCrash[78855]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
8/6/14 11:37:57.785 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78854]) Job appears to have crashed: Bus error: 10
8/6/14 11:37:57.785 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:37:57.845 PM ReportCrash[78855]: Saved crash report for MessageCenter[78854] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233757_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:38:07.920 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78856]) Job appears to have crashed: Bus error: 10
8/6/14 11:38:07.920 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:38:07.939 PM ReportCrash[78855]: Saved crash report for MessageCenter[78856] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233807_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:38:18.056 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78859]) Job appears to have crashed: Bus error: 10
8/6/14 11:38:18.056 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:38:18.076 PM ReportCrash[78855]: Saved crash report for MessageCenter[78859] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233818_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:38:28.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=78861[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
8/6/14 11:38:28.205 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78860]) Job appears to have crashed: Bus error: 10
8/6/14 11:38:28.205 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:38:28.225 PM ReportCrash[78855]: Saved crash report for MessageCenter[78860] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233828_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:38:38.341 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78862]) Job appears to have crashed: Bus error: 10
8/6/14 11:38:38.341 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:38:38.360 PM ReportCrash[78855]: Saved crash report for MessageCenter[78862] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233838_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:38:48.481 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78863]) Job appears to have crashed: Bus error: 10
8/6/14 11:38:48.481 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:38:48.499 PM ReportCrash[78855]: Saved crash report for MessageCenter[78863] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233848_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:38:58.507 PM ReportCrash[78865]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
8/6/14 11:38:58.628 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78864]) Job appears to have crashed: Bus error: 10
8/6/14 11:38:58.628 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:38:58.664 PM ReportCrash[78865]: Saved crash report for MessageCenter[78864] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233858_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:39:08.768 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78866]) Job appears to have crashed: Bus error: 10
8/6/14 11:39:08.768 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:39:08.787 PM ReportCrash[78865]: Saved crash report for MessageCenter[78866] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233908_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:39:18.907 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78868]) Job appears to have crashed: Bus error: 10
8/6/14 11:39:18.907 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:39:18.926 PM ReportCrash[78865]: Saved crash report for MessageCenter[78868] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233918_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:39:29.043 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78869]) Job appears to have crashed: Bus error: 10
8/6/14 11:39:29.043 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:39:29.063 PM ReportCrash[78865]: Saved crash report for MessageCenter[78869] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233929_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:39:33.045 PM com.apple.backupd[78806]: Deep event scan at path:/Volumes/Media reason:must scan subdirs|require scan|
8/6/14 11:39:33.046 PM com.apple.backupd[78806]: Finished scan
8/6/14 11:39:33.046 PM com.apple.backupd[78806]: Not using file event preflight for Media
8/6/14 11:39:35.803 PM com.apple.backupd[78806]: Found 70992 files (587.73 GB) needing backup
8/6/14 11:39:35.834 PM com.apple.backupd[78806]: 611.31 GB required (including padding), 518.88 GB available
8/6/14 11:39:35.834 PM com.apple.backupd[78806]: No expired backups exist - deleting oldest backups to make room
8/6/14 11:39:39.185 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78870]) Job appears to have crashed: Bus error: 10
8/6/14 11:39:39.185 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:39:39.204 PM ReportCrash[78865]: Saved crash report for MessageCenter[78870] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233939_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:39:47.777 PM com.apple.backupd[78806]: Deleted backup /Volumes/Time Machine/Backups.backupdb/Alex Edmunds’s MacBook Pro/2014-08-06-041205 containing 29.2 MB; 518.92 GB now available, 611.31 GB required
8/6/14 11:39:47.777 PM com.apple.backupd[78806]: Removed 1 expired backups so far, more space is needed - deleting oldest backups to make room
8/6/14 11:39:49.315 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78872]) Job appears to have crashed: Bus error: 10
8/6/14 11:39:49.315 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:39:49.334 PM ReportCrash[78865]: Saved crash report for MessageCenter[78872] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233949_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:39:50.722 PM com.apple.backupd[78806]: Deleted backup /Volumes/Time Machine/Backups.backupdb/Alex Edmunds’s MacBook Pro/2014-08-06-050217 containing 16.4 MB; 518.93 GB now available, 611.31 GB required
8/6/14 11:39:50.722 PM com.apple.backupd[78806]: Removed 2 expired backups so far, more space is needed - deleting oldest backups to make room
8/6/14 11:39:54.321 PM com.apple.backupd[78806]: Deleted backup /Volumes/Time Machine/Backups.backupdb/Alex Edmunds’s MacBook Pro/2014-08-06-060415 containing 37.3 MB; 518.97 GB now available, 611.31 GB required
8/6/14 11:39:54.321 PM com.apple.backupd[78806]: Removed 3 expired backups so far, more space is needed - deleting oldest backups to make room
8/6/14 11:39:59.342 PM ReportCrash[78874]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
8/6/14 11:39:59.381 PM com.apple.backupd[78806]: Deleted backup /Volumes/Time Machine/Backups.backupdb/Alex Edmunds’s MacBook Pro/2014-08-06-070639 containing 108.3 MB; 519.09 GB now available, 611.31 GB required
8/6/14 11:39:59.381 PM com.apple.backupd[78806]: Removed 4 expired backups so far, more space is needed - deleting oldest backups to make room
8/6/14 11:39:59.467 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78873]) Job appears to have crashed: Bus error: 10
8/6/14 11:39:59.467 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:39:59.507 PM ReportCrash[78874]: Saved crash report for MessageCenter[78873] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-233959_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:40:02.467 PM com.apple.backupd[78806]: Deleted backup /Volumes/Time Machine/Backups.backupdb/Alex Edmunds’s MacBook Pro/2014-08-06-080909 containing 91.3 MB; 519.18 GB now available, 611.31 GB required
8/6/14 11:40:02.467 PM com.apple.backupd[78806]: Removed 5 expired backups so far, more space is needed - deleting oldest backups to make room
8/6/14 11:40:02.467 PM com.apple.backupd[78806]: Deleted 5 backups containing 282.4 MB total; 519.18 GB now available, 611.31 GB required
8/6/14 11:40:02.467 PM com.apple.backupd[78806]: Backup date range was shortened: oldest backup is now Aug 6, 2014
8/6/14 11:40:03.163 PM com.apple.backupd[78806]: Backup failed with error 7: Not enough available disk space on the target volume.
8/6/14 11:40:09.597 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78877]) Job appears to have crashed: Bus error: 10
8/6/14 11:40:09.597 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:40:09.616 PM ReportCrash[78874]: Saved crash report for MessageCenter[78877] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-234009_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:40:19.731 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78878]) Job appears to have crashed: Bus error: 10
8/6/14 11:40:19.731 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:40:19.749 PM ReportCrash[78874]: Saved crash report for MessageCenter[78878] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-234019_Alex-Edmundss-M acBook-Pro.crash
8/6/14 11:40:29.863 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist[78879]) Job appears to have crashed: Bus error: 10
8/6/14 11:40:29.863 PM com.apple.launchd[1]: (cn.com.zte.MessageCenter.plist) Throttling respawn: Will start in 10 seconds
8/6/14 11:40:29.882 PM ReportCrash[78874]: Saved crash report for MessageCenter[78879] version ??? to /Library/Logs/DiagnosticReports/MessageCenter_2014-08-06-234029_Alex-Edmundss-M acBook-Pro.crash -
Can't scan with snow leopard and canon pixma 850
I think I downloaded the newest driver but though I can print wirelessly I con't see my scanner utility so I can't scan. Ideas?
The inability to scan is caused by a limitation with the Airport device. The USB port of the AirPort Base Station and Time Capsule does not support printer utilities or other special features, such as scanning, that requires a direct proprietary connection.
-
How conclusive is the packet scanning used by Cicso IPS? Would I be correct in suggesting that no uploaded file scan is required by the receiving server application if the packets passed through the IPS? Can viruses be properly detected piece meal (e.g. in packets) or, to ensure all known viruses are caught, do I again need to run virus software on the entire file?
I agree. It may stop some network worms that rely on buffer overflows to infect their target hosts, but you don't typically have ports open on the edge of your network that would allow that traffic to pass anyway. Maybe its helpful stopping some spyware/adware downloaded via malicious java applets, vbscript, and images - but that is also better stopped by strict policies on your machines.
Basically the IPS is good for recognizing and stopping network intrusions and in some cases extrusions. However if one of your users is uploading or downloading a malicious or confidential file over https/ssl, the IPS won't be able to see it anyway. -
Network Scan: IP "AND" AD OU Search
i dont think so. the entry has to be either an ip address or an OU.
Is it possible to have the network scan function require two search criteria?
I would like to scan for computers that are both in a specific OU in Active Directory as well as a specific IP range. Is this possible? One example is that we have an OU that includes systems from different locations. Each location has their own SW server. So, I would effectively like to do an AND function in the search.
This topic first appeared in the Spiceworks Community -
Unable to email scans because of Avail
I am unable to email a scan document on new HP Deskjet 1512...reason:internet email accounts not supported. I use Gmail...is there a way around this?
Hi,
Scanning to Email directly from the HP Scan software require an email client software installed on your PC, it cannot connect to an Internet based interface such as Gmail.
You may download and install a free email client and set the Gmail account on it, there are several free mail clients such as Windows Live Mail or Mozilla Thunderbird as example.
Once installing a such be sure to select to set it as the default email client, the installation should offer to do so.
Then set your Gmail account within the client and then you may select Scan to Email from the HP Software.
You may follow these steps to set up Gmail on Thunderbird:
http://www.guidingtech.com/2219/set-up-gmail-in-thunderbird/
And the following for Windows Live Mail:
http://www.freeemailtutorials.com/windowsLiveMail/setupEmailAccounts/setupGmailAccount.htm
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
hi guys
i want to do a scan mode for a CompactRIO and my friend has not the hardware (cRIO) so i want to know if the Scan Mode requires the hardware or not and if it's possible to make a virtual cRIO plz help help helpHello,
You can use a certain level of “simulation” capabilities…more like setting up off line devices as explained in Document ID: 3W6EFRLX.
Unfortunately in Scan mode these features won’t help much if you truly want to simulate the behavior of your program but if you only want to start building the application and preparing the VIs before getting the hardware then it should help you get started.
Also, you can try to work around the limitation by running your RT VI on the windows Host and the module related logic on FPGA with simulated IO.
I hope this helps
Alejandro | Academic Program Engineer | National Instruments -
Configuring HP LaserJet 100 (scanner doesn't work)
Hi,
I've been trying to get my printer+scanner to work. Printing works fine, but can't get the scanning to work.
It is a network printer. Currently it's configured via 'hp-setup', but I've tried configuring it through CUPS web interface, and it's the same problem.
Here's what I get from 'xsane':
And from 'scanimage -L':
% scanimage -L
device `hpaio:/net/HP_LaserJet_100_colorMFP_M175nw?ip=10.2.0.10' is a Hewlett-Packard HP_LaserJet_100_colorMFP_M175nw all-in-one
device `v4l:/dev/video0' is a Noname HP HD Webcam virtual device
Here's the output from 'hp-doctor':
% hp-doctor
HP Linux Imaging and Printing System (ver. 3.14.6)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: arch distro is not found in AUTH_TYPES
Checking for Deprecated items....
error: This distro (i.e unknown 0.0) is either deprecated or not yet supported.
The diagnosis is limited on unsupported platforms. Do you want to continue?(y=yes*, n=no):
Checking for HPLIP updates....
error: HPLIP upgrade is disabled by Archlinux for security reasons, see https://bugs.archlinux.org/task/38083 - if you like to upgrade HPLIP, use the Archlinux software package manager pacman.
Done.
error: Failed to upgrade latest HPLIP. Is hp-upgrade already running (i.e. foreground or background)?
Checking for Dependencies....
warning: unknown-0.0 version is not supported. Using unknown-0 versions dependencies to verify and install...
| SYSTEM INFO |
Kernel: 3.14.6-1-ARCH #1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014 GNU/Linux
Host: sablade
Proc: 3.14.6-1-ARCH #1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014 GNU/Linux
Distribution: unknown 0.0
Bitness: 64 bit
| HPLIP CONFIGURATION |
HPLIP-Version: HPLIP 3.14.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro 0.0 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.14.6
html=/usr/share/doc/hplip-3.14.6
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.14.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.14.6
Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hp:/net/HP_LaserJet_100_colorMFP_M175nw?ip=10.2.0.10"
printer_name =
working_dir = .
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[upgrade]
notify_upgrade = false
last_upgraded_time = 1402934982.23681
pending_upgrade_time = 0
[installation]
date_time = 17/06/14 09:15:12
version = 3.14.6
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
| External Dependencies |
policykit Admin-Policy-framework OPTIONAL - 0.112 OK - gs Ghostscript REQUIRED 7.05 9.14 OK - network Network-wget OPTIONAL - 1.15 OK - scanimage Shell-Scanning OPTIONAL 1.0 1.0.24 OK - avahi-utils avahi-utils OPTIONAL - 0.6.31 OK - dbus DBus REQUIRED - 1.8.4 OK - cups CUPS REQUIRED 1.1 1.7.3 OK 'CUPS Scheduler is running'
xsane SANE-GUI OPTIONAL 0.9 0.999 OK -
| General Dependencies |
error: reportlab Python-PDF-Lib OPTIONAL 2.0 3.1.8 MISSING 'reportlab needs to be installed' libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.11 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.19 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK - python-devel Python-SDK REQUIRED 2.2 3.4.1 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.11 OK - cups-devel CUPS-SDK REQUIRED - 1.7.3 OK - sane-devel SANE-SDK REQUIRED - 1.0.24 OK - libusb USB-Lib REQUIRED - 1.0 OK - sane Scan-Lib REQUIRED - 1.0.24 OK - cups-image CUPS-Image-Lib REQUIRED - 1.7.3 OK - libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
| Compile Time Dependencies |
gcc gcc-Compiler REQUIRED - 4.9.0 OK - libtool Build-tools REQUIRED - 2.4.2 OK - make GNU-Build-tools REQUIRED 3.0 4.0 OK -
| Python Extentions |
cupsext CUPS-Extension REQUIRED - 3.14.6 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.6 OK -
hpmudext IO-Extension REQUIRED - 3.14.6 OK -
| Scan Configuration |
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.6 OK -
| DISCOVERED SCANNER DEVICES |
device `hpaio:/net/HP_LaserJet_100_colorMFP_M175nw?ip=10.2.0.10' is a Hewlett-Packard HP_LaserJet_100_colorMFP_M175nw all-in-one
device `v4l:/dev/video0' is a Noname HP HD Webcam virtual device
| DISCOVERED USB DEVICES |
No devices found.
| INSTALLED CUPS PRINTER QUEUES |
HP_LaserJet_100_colorMFP_M175nw
Type: Printer
Device URI: hp:/net/HP_LaserJet_100_colorMFP_M175nw?ip=10.2.0.10
PPD: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175nw.ppd
PPD Description: HP LaserJet 100 color MFP M175 Postscript (recommended)
Printer status: printer HP_LaserJet_100_colorMFP_M175nw is idle. enabled since Mon 16 Jun 2014 16:56:01 BST
Required plug-in status: Installed
error: Unable to communicate with device (code=12): hp:/net/HP_LaserJet_100_colorMFP_M175nw?ip=10.2.0.10 <-- I'm
error: unable to open channel guessing here is
error: Communication status: Failed the problem -->
| PERMISSION |
Checking Permissions....
Permissions are correct.
Checking for Configured Queues....
Queue(s) configured correctly using HPLIP.
Checking for HP Properitery Plugin's....
Plugin's already installed
Checking for Printer Status....
error: 'HP_LaserJet_100_colorMFP_M175nw' Printer is either Powered-OFF or Failed to communicate.
Turn On Printer and re-run hp-doctor
Diagnose completed...I've had similar problems, installing python-pillow and python2-pyqt package, as mentioned elsewhere in this forum, solved the problem.
I can now use simple scan for scanning, when before it only detected my webcam.
Last edited by pagadder (2014-09-30 07:06:31)
Maybe you are looking for
-
2 Logical Host, 2 Web Servers, Big Problem?
I am setting up a sun HA cluster using 2 E4500 servers. I have created 2 logical hosts, each one needs to host a Netscape iPlanet 4.0 web server sitting at port 80. Each logical host is serving up web applications for different clients. If I need to
-
How to create a menu in the canvas
Hi, I want to create a menu in my canvas, like this: http://nsa30.casimages.com/img/2013/01/14/130114030406639595.png
-
Why is my MacBook Air screen white?
I Tried turning on my MacBook Air today and when the screen lit up it didn't load anything, all there is is a white screen. I have tried turning it on and off but it doesn't make a difference. It was working normally yesterday and had no problems wit
-
Send query's result via SMS (BW3.0b)
Hi we need to send query's results via sms. We're going to use reporting agent (we configured an exception in bex and created a follow up action). Now I can only send a SAP office message. In order to send a sms, could you help me to understand which
-
Jdev database adapter config wizard
hi, i'm using JDeveloper 10.1.2 and mySQL Server 4.1 i realized that i have to use JDeveloper to be able to set up DBAdapters for my BPEL process .. anyway, i created a new PartnerLink, i click on the Define Adapter Service icon, then i get the ADAPT