SCCM 2012 SP1 - CMEnroll Mac OSX Password Prompt

Hi,
is there a way to automate the certificate enrollment on Mac OSX,
im running cmenroll -s fqdn.of.server -ignorecertchainvalidation -u "[email protected]" but im asked for the password for this account.when i put it in, it gets the certificate as it should, but i would like to automcate this task rather than
going to every Mac to install sccm.
I tried specifying the password using -p but it doesnt recognize that as a command. does anyone know of a way around it, or another way of automating the certificate request that people know of?
Thanks

Thank you Panu
For me the script worked using this syntax:
Putting CMEnroll from the macclient.dmg Tools to /tmp
Using " instead of ' for username
Using \\ instead of \ to send a literal backslash
Have the enter \n on a line by itself
Check EnrollmentServer.log on the SCCM server
#!/usr/bin/expect
spawn /tmp/CMEnroll -s hostname -ignorecertchainvalidation -u "domain\\username"
expect "Please enter your password."
send "PASSWORD"
send "\n"
interact
Successfully tested on SCCM 2012 SP1 CU2 with Mac OS X 10.8.3 CMClient 5.00.7804.1202

Similar Messages

SCCM 2012 SP2 - CMEnroll Mac OSX

Hi,
We're starting deployment testing on Macs with SCCM 2012 SP2.
I was reading below link to automate Mac client install/enroll but still have some difficulties.
http://social.technet.microsoft.com/Forums/en-US/36150605-0711-4617-bcc7-32f786892b35/sccm-2012-sp1-cmenroll-mac-osx-password-prompt?forum=configmanagerdeployment
My idea to automate this process was by using Send UNIX command from ARD. I am able to install (via ARD by sending cmmsetup) command but am having difficulties enrolling via ARD.
I did create a shell script (as per above link) for enrollment, here's the script:
#!/usr/bin/expect
spawn /tmp/SCCM_install/Tools/CMEnroll -ignorecertchainvalidation -s SCCM_server_FQDN -u "DOMAIN\\AD_Account"
expect "Please enter your password."
send "Password"
send "\n"
interact
If i run this script via Terminal, enrollment works fine.
If i try to run same script via Send Unix command from ARD (sudo -s /private/tmp/SCCM_enroll.sh -i) then it fails, here's the output from ARD:
Please enter your password.
System Center Configuration Manager Client for Mac OS X
Version: 5.00.7958.1101
Copyright 2013 Microsoft Corporation
Contacting Server: https://SCCM_server_FQDN/EnrollmentServer/DeviceEnrollmentWebService.svc
Nothing else is being logged, it appears that password was accepted but it's supposed to say
Using username: DOMAIN\AD_Account and a few more lines.
Any suggestions on what else to try?

the problem appears to be related to expect command which doesn't wait enough for enrollment to finish. Solution was to add a few more expect lines containing output from a successful enrollment such as:
expect "System Center Configuration Manager Client for Mac OS X"
expect " Contacting Server: https://SCCM_server_FQDN/EnrollmentServer/DeviceEnrollmentWebService.svc"
expect "Using username: DOMAIN\AD_user"
expect "Successfully enrolled."

SCCM 2012 SP1 and SCEP for Mac

Hello all,
We have SCCM 2012 SP1 with SECP installed and working well for Windows clients.
A request came to me that we have the roughly 10ct Mac computers protected by EndPoint and reporting through SCCM.
Is this possible with what I have now?
Please let me know if you have any clues for me.
Many thanks!

Hi,
There is no way to push the SCCM MAC Client to a MAC Computer, you have to install it manually, threre are scripts available on blogs that can assits but still you have to run those scripts manually as well.
The System Center Endpoint Protection client for MAC is indeed a separate download on the volume licensing site, it is not managed through SCCM it is a standalone antivirus software which download it's defenition files directly from the internet. So there
is now way to manage it centrally.
I hope that answered your questions.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Reports not Generated after moving SCCM 2012 SP1 DB on SQL 2012 SP1 cluster

Hi all,
i have moved my SCCM 2012 SP1 DB on SQL 2012 SP1 Failover Cluster,this cluster is a two node cluster.the DB was moved fine and the DB configuration in SCCM Site maintenance was also done successfully.After the migration process,SCCM was working fine created
few collections & packages, then checked the DB on cluster & they were updated successfully.
but when i tried to install report server on my SCCM machine,again there was no instance displayed after entering the cluster name.
I searched this & come across this post :-
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/4479e73e-8a19-4c7e-9418-b36770656b9b/
which says to install report server on the cluster node machine which is currently running the Reporting Service.I tried to install the report server & the instance was detected this time.it was installed successfully.
But when i tried to generate reports I got this error :-
Permissions are fine as i have added SCCMadmin & sccm machine in the local admin of both the nodes.
Please Help.
Thanks,
Pranay.

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
If you look at your second screenshot the Remote errors is not enabled. Use this blog to enable them.
http://www.enhansoft.com/blog/enabling-remote-errors-in-sql
If changing the data source on the report fixed it for a single report. It means that your shared Datasource is having problems. Reset the username and password within CM12 console and this should fix it for every report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site

I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
The error I get in ccmsetup.log is:
<![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
<![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
<![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: CcmRegisterHostingConfiguration.
ErrorMessages:
Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
<![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
<![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
<![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
I have this on my primary and secondary servers as well.
Is upgrading to R2 recommended and will that solve this issue ?
When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.

Try the following steps to specify the hotfix when installing the client.
1. Open an elevated command prompt.
2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
\\servername\SMS_SITE\Client\hotfix folder:
\ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp
Juke Chou
TechNet Community Support

Linking InTune to SCCM 2012 SP1

Hi, I have a question around what is required to link InTune and to our local SCCM 2012 SP1 server.
Is it required to sync our Active Directory objects? What we are hoping to achieve is to simply install the InTune client on our Windows 7/Windows 8 laptops and tablets, then manage updates, antivirus, remote control and inventory data.
We don't need the ability to have users self enroll devices, we will be installing the client in the IT department. We also do not need to provide the ability to users to log in to install applications from a portal. We just want to manage the
devices.
We just want to be able to bring data from the InTune system into our local SCCM database if possible as it ties into our inventory system.
That being said, I've verified our domain in InTune. Do I need to sync Active Directory or can I omit this and set up the InTune subscription in SCCM?
Thanks,
Travis

The official answer is
YES.
http://technet.microsoft.com/en-us/library/jj884158.aspx#bkmk_preq
The device apps prompt the user to log in. If their account isn't present within Azure AD (and therefore InTune), users will not be able to log in. In reality, i suspect some stuff would work, but with cloud services especially, i'd stick to
the official support guidance.
Mike Crowley | MVP
My Blog --
Planet Technologies

SCCM 2012 SP1 - Software Center appears twice in Start Menu

Hi guys,
i just finished implementing a fresh SCCM 2012 SP1 Installation for a customer. The whole OSD works like a charm (except some issues with the latest Windows updates breaking the whole OSD, will open a separate thread for this soon), but after the deployment
the Software Center is appearing twice in the Start Menu (We're using Win7 Enterprise SP1 x86 English with 5 integrated language packs). I first thought this has something to do with the integrated language packs, but both Start Menu entries
are always in the same language.
The strange Thing is, that one entry for the SCCM Software Center is called "Software Center" and the other one "SoftwareCenter" (without a space). We configured 2 Client policies, one with EP-enabled and one without EP. We
deployed the Client Settings to different collections so i don't think that this is causing the Problem?Do you guys have any idea why this is Happening?
Has anyone ever seen this? See a screenshot below:
Thank you.
Cheers
Stefan

Thanks for your Response Thomas.
I don't think it is related to the upgrade to SP1.I think it might be a General issue in SP1. I started with a fresh SCCM 2012 SP1 Installation and i also have 2 Software Center entries in my start menu. If i check the shortcut i can see that one shortcut
was created when i captured my base Image, the other one was created during the Install OS Task Sequence.

SCCM 2012 SP1 errors when downloading updates

Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 SP1 MDT task sequence fails on reboot does not retain ip

we are having a sccm 2012 sp1 server that used for installation of win 8.1 Enterprise , the task sequence works perfectly fine but when we run the same task on HP Elite 8300 system having Intel 82579LM Adapter from Windows XP , after the reboot the
task fails as no ip address is assigned the NIC , We did download the WInPE Adapter drivers from HP site and injecting to the x86 Boot Image (6.2.9200) however the task still fails ,
Our environment uses all static ip address , the same task as mentioned earlier has worked fine with Different brands of HP elite 8200/8100 , infact the elite 8200 also uses the same NIC card
Find below the smsts.log file
Main error in the log file is
No physical network adapters found   OSDNetSettings   2/12/2014 1:02:38 AM   2064 (0x0810)
Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 169.254.181.151.   TSMBootstrap   2/12/2014 1:05:41 PM   1984 (0x07C0)
Xtract from LOG
SMSTSRebootDelay=60   Reboot   2/12/2014 1:01:56 AM   3496 (0x0DA8)
SMSTSRebootMessage=A new Microsoft Windows operating system is being installed. The computer must restart to continue.   Reboot   2/12/2014 1:01:56 AM   3496 (0x0DA8)
SMSTSRebootRequested=WinPE   Reboot   2/12/2014 1:01:56 AM   3496 (0x0DA8)
Process completed with exit code 0   TSManager   2/12/2014 1:01:56 AM   1876 (0x0754)
!--------------------------------------------------------------------------------------------!   TSManager   2/12/2014 1:01:56 AM   1876 (0x0754)
Successfully completed the action (Restart to Windows PE) with the exit win32 code 0   TSManager   2/12/2014 1:01:56 AM   1876 (0x0754)
Set authenticator in transport   TSManager   2/12/2014 1:01:56 AM   1876 (0x0754)
Set a global environment variable _SMSTSLastActionRetCode=0   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Set a global environment variable _SMSTSLastActionSucceeded=true   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Clear local default environment   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Updated security on object E:\_SMSTaskSequence.   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Save the current environment block   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Executing command line: "bcdedit.exe"   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
CreateProcess failed. Code(0x80070002)   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Command line execution failed (80070002)   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Staging boot image UNB0003A   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
ResolveSource flags: 0x00000000   TSManager   2/12/2014 1:01:59 AM   1876 (0x0754)
SMSTSPersistContent: . The content for package UNB0003A will be persisted   TSManager   2/12/2014 1:01:59 AM   1876 (0x0754)
Set authenticator in transport   TSManager   2/12/2014 1:01:59 AM   1876 (0x0754)
WinHttp credentials set   TSManager   2/12/2014 1:01:59 AM   1876 (0x0754)
List of files to be downloaded   TSManager   2/12/2014 1:01:59 AM   1876 (0x0754)
Downloaded file from http://unb-ho-sccmdb.exch1.mas.unb.com:80/SMS_DP_SMSPKG$/UNB0003A/sccm?/WinPE.UNB0003A.wim to E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim    TSManager   2/12/2014 1:02:22 AM   1876
(0x0754)
VerifyContentHash: Hash algorithm is 32780   TSManager   2/12/2014 1:02:22 AM   1876 (0x0754)
Found boot image E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim   TSManager   2/12/2014 1:02:25 AM   1876 (0x0754)
Copying boot image locally...   TSManager   2/12/2014 1:02:25 AM   1876 (0x0754)
Failed to find ADK installation root registry key   TSManager   2/12/2014 1:02:32 AM   1876 (0x0754)
Opening image file E:\_SMSTaskSequence\WinPE\sources\boot.wim   TSManager   2/12/2014 1:02:32 AM   1876 (0x0754)
Applying image 1 to volume E:\_SMSTaskSequence\WinPE   TSManager   2/12/2014 1:02:32 AM   1876 (0x0754)
Closing image file E:\_SMSTaskSequence\WinPE\sources\boot.wim   TSManager   2/12/2014 1:02:35 AM   1876 (0x0754)
Capturing WinPE bootstrap settings   TSManager   2/12/2014 1:02:35 AM   1876 (0x0754)
Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}   TSManager   2/12/2014 1:02:35 AM   1876 (0x0754)
Executing command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}   TSManager   2/12/2014 1:02:35 AM   1876 (0x0754)
==============================[ OSDNetSettings.exe ]===========================   OSDNetSettings   2/12/2014 1:02:36 AM   2064 (0x0810)
Command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}   OSDNetSettings   2/12/2014 1:02:36 AM   2064 (0x0810)
No adapters found with non-empty DNSDomainSuffixSearchOrder   OSDNetSettings   2/12/2014 1:02:36 AM   2064 (0x0810)
Adapter "ROOT\SYMC_TEEFER2MP\0000" not found   OSDNetSettings   2/12/2014 1:02:38 AM   2064 (0x0810)
No physical network adapters found   OSDNetSettings   2/12/2014 1:02:38 AM   2064 (0x0810)
OSDNetSettings finished: 0x00000000   OSDNetSettings   2/12/2014 1:02:38 AM   2064 (0x0810)
Process completed with exit code 0   TSManager   2/12/2014 1:02:38 AM   1876 (0x0754)
Installing boot image to hard drive   TSManager   2/12/2014 1:02:38 AM   1876 (0x0754)
Backing up existing boot system before trying to set up new boot system   TSManager   2/12/2014 1:02:38 AM   1876 (0x0754)
BootLoader::backup: C:\, E:\_SMSTaskSequence\backup   TSManager   2/12/2014 1:02:39 AM   1876 (0x0754)
BootLoader::restore: E:\_SMSTaskSequence\WinPE, C:\   TSManager   2/12/2014 1:02:43 AM   1876 (0x0754)
Saving bcd store to E:\_SMSTaskSequence\WinPE\boot\BCD   TSManager   2/12/2014 1:02:43 AM   1876 (0x0754)
Executing command line: "E:\_SMSTaskSequence\WinPE\SMS\bin\i386\bootsect.exe" /NT60 SYS /MBR   TSManager   2/12/2014 1:02:45 AM   1876 (0x0754)
Process completed with exit code 0   TSManager   2/12/2014 1:02:46 AM   1876 (0x0754)
Updated security on object E:\_SMSTaskSequence.   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Save the current environment block   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Updated security on object C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Updated security on object D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Updated security on object E:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Updated security on object E:\_SMSTaskSequence.   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Save the current environment block   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Expand a string: %_SMSTSMDataPath%\Logs   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
<![LOG[LOGGING: Finalize process ID set to 780]LOG]!><time="01:04:01.537+480" date="02-12-2014" component="TSBootShell" context="" type="1" thread="784" file="tslogging.cpp:1495">
   1/1/1601 12:00:00 AM   1995266923 (0x76ED5B6B)
==============================[ TSBootShell.exe ]==============================   TSBootShell   2/12/2014 1:04:01 AM   784 (0x0310)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'   TSBootShell   2/12/2014 1:04:01 AM   784 (0x0310)
Debug shell is enabled   TSBootShell   2/12/2014 1:04:01 AM   784 (0x0310)
Waiting for PNP initialization...   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(3)\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
WinPE boot path: E:\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
Booted from fixed disk   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
Found config path E:\_SMSTaskSequence   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
Restoring boot system from E:\_SMSTaskSequence\backup   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
Successfully loaded the BCD boot system   TSBootShell   2/12/2014 1:04:05 AM   796 (0x031C)
Successfully loaded an exported NTLDR boot system   TSBootShell   2/12/2014 1:04:05 AM   796 (0x031C)
BootLoader::restore: E:\_SMSTaskSequence\backup, C:\   TSBootShell   2/12/2014 1:04:05 AM   796 (0x031C)
Successfully merged logs from cache.   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Loading bootstrap settings from E:\_SMSTaskSequence\WinPE   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Loading saved WinPE settings   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00450037004500350042004200360039002D0036003100390038002D0034003500350035002D0042003500430041002D003600430034003600410032004200350045004200370038007D00'   TSBootShell
2/12/2014 1:04:06 AM   796 (0x031C)
Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Configuring WinPE bootstrap settings   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Creating WinPE answer file   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Setting hive location to "X:\windows\system32"   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Getting namespace "Microsoft-Windows-Setup" for architecture "x86"   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Configuring global network settings   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Join type:    TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
DNS domain: exch1.mas.unb.com   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
DNS domain search order:    TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
IP filter sec enabled: false   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
No adapters found in environment. Performing global configuration only.   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Writing configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Successfully saved configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Executing command line: wpeinit.exe -winpe   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
The command completed successfully.   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
Starting DNS client service.   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
Finalizing network settings   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
No adapters found in environment. Performing global finalization only.   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
Finalizing global network settings   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
DNS domain: exch1.mas.unb.com   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
DNS domain search order:    TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
DNS for WINS enabled: false   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
LMHosts file enabled: true   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
Host lookup file:    TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
WINS scope ID:    TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
The command completed successfully.   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
==============================[ TSMBootStrap.exe ]==============================   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL'   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Failed to open PXE registry key. Not a PXE boot.   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Resuming Task Sequence in WinPE   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'   TSMBootstrap
2/12/2014 1:05:40 AM   1984 (0x07C0)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'   TSMBootstrap
2/12/2014 1:05:40 AM   1984 (0x07C0)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Loading the Task Sequencing Environment from "E:\_SMSTaskSequence\TSEnv.dat".   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Updating the local data path in the Task Sequencing Environment.   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Setting LogMaxSize to 1000000   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Setting LogMaxHistory to 1   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Setting LogLevel to 0   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Setting LogEnabled to 1   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Setting LogDebug to 1   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Command line for extension .exe is "%1" %*   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Set command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Executing command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
==========[ TsProgressUI started in process 2004 ]==========   TsProgressUI   2/12/2014 1:05:41 AM   2008 (0x07D8)
Command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:W
In dire need of help,
I have already gone through the below articles on the NET
http://social.technet.microsoft.com/Forums/systemcenter/en-US/0fe5cded-51cf-487a-97e3-837fb3426a3e/install-software-updates-in-osd-reboots-leaves-clients-in-provisioning-mode?forum=configmgrosd
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c590e486-d3ca-423f-8953-e596160f3567/updates-hang-during-osd-kb2509007-not-working-for-me?forum=configmgrosd
Awating response,
Hasan Reza

Well Finally I sorted my issue ,
Just want to share the solution, may be it would be helpful to some one else and save some times
The problem was that the Xp images has lot of hidden NIC installed , this would not allow the system to work with the correct NIC card and Ip address (System -> View Hidden Devices) , what I did 2 things
1) Copied the OSD Script folder from the SCCM Server to the Client pc and ran that ztigather.wsf and captured the output , it was evident that it showed capturing multiple adapters , (There are some blogs that pointed out that OSD can capture only one nic
due to the only one Adapter0 section being defined in the ZTIgather.xml file,)
2) I open the registry at the xp pc navigated to HKLM-> System ->Current Control Set-> Services-> TCPIP -> Parameters-> Interfaces ->
Expect for the NIC card that had the Ip address assigned I deleted all other nic card's guid,
As then post running deleting the old scanstate (USMTUTIL /rd c:\statestore) , reran the task and VOILA..
All worked fine , below are the two post I followed , though notvery relevant but they were helpful and help me reached the conclusion.
Thanks,
Hasan Reza.
http://systemscenter.ru/mdt2012.en/ztigatherwsf.htm
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8acb7cd1-7028-4ffe-86c9-eb43041cf8b3/how-do-i-get-rid-of-second-169254xx-ipv4-address-on-windows-server-2008-sp2-x86?forum=winservergen

SCCM 2012 SP1 - Offline Servicing failure - Failed to find or access the update binaries to be applied on the image

Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:52:49        8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite'        SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49        8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
UnMounting Image (Commit Changes = 0) ...        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
Completed processing image package PackageID. Status = Failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Updated history for image package PackageID in the database        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Schedule processing failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Processing completed for Schedule with ID 16777237        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0        SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04        8272 (0x2050)
Schedule processing thread stopped        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:05        8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.

Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu

Office 2013 Professional Plus - 32 bit Deployment takes an unacceptable time to deploy in SCCM 2012 - SP1 CU3

We recently migrated over to SCCM 2012 SP1 - CU3 the first of the year from SCCM 2007 SP2. We have used SCCM in the past to deploy Office 2010 and had deployed Office 2013 to our IT Dept. before moving over to SCCM 2012. The deployment went as
expected. Now that we are ready to start deploying Office 2013 to our corporate workstations, the deployment time is running 4.5 hours to 5.5 hours from the local site server DP. I am afraid to find out what time we are looking at for remote DP's.
The three factors that are different is that our SCCM site server is virtual, it is running 2012 for the OS, and obviously SCCM 2012-SP1 - CU3. We are using the same package source files. Previous to a successful deployment we were
seeing hash mismatch errors which MS support pointed us to the nic driver on the VM was using E1000E and to change it to a VMX something driver.
So I guess my question is anyone else out there deploying Office 2013 ProPlus - 32 bit from this type of environment? Our previous deployment time for office was a little over an hour (not five hours). Any suggestions where to look to improve
the deployment time?
I am expected to deploy this in one week and have been working on these issues for weeks.

I see now that you are using a combination of scripts and ConfigMgr package/program.
The AppEnforce.log file is for use with the new ConfigMgr Application model.
Is there any reason that you don't use the new model for deploying Office 2013? It's a single step process and perfect for it. If you use the Office Customisation Tool you can customise what you like. The process will then uninstall Office 2010 and install
Office 2013.
This is how you do it
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_9368.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Management Point fails after installing SCCM 2012 SP1

I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
1. Newly built Windows Server 2012 box
2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
[19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
[19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
[19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result.
Would really appreciate some help if anyone's fixed this issue

I'm still struggling, I've uninstalled MP
<04/16/14 08:06:59> SMSMP Setup Started....
<04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
<04/16/14 08:06:59> Deinstalling the SMSMP
<04/16/14 08:06:59> No versions of SMSMP are installed. Returning Success.
<04/16/14 08:06:59> ~RoleSetup().
Ran the command, Invoke-Command {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
Checked Namespace Instances to ensure '= ccm' is not longer there.
Rebooted Server and re-installed MP but it still fails
<04/16/14 08:37:26> ====================================================================
<04/16/14 08:37:26> SMSMP Setup Started....
<04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
<04/16/14 08:37:26> Installing Pre Reqs for SMSMP
<04/16/14 08:37:26> ======== Installing Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP
<04/16/14 08:37:26> Pre Req MSXML60 found.
<04/16/14 08:37:26> No versions of MSXML60 are installed. Would install new MSXML60.
<04/16/14 08:37:26> Enabling MSI logging. msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi
<04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
<04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
<04/16/14 08:37:26> Pre Req SqlNativeClient found.
<04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
<04/16/14 08:37:26> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Installing the SMSMP
<04/16/14 08:37:26> Passed OS version check.
<04/16/14 08:37:26> IIS Service is installed.
<04/16/14 08:37:26> No versions of SMSMP are installed. Installing new SMSMP.
<04/16/14 08:37:26> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<04/16/14 08:37:26> mp.msi exited with return code: 1603
<04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
<04/16/14 08:37:26> ~RoleSetup().
On checking I don't seem to have anything in IIS, no default web site.
I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
Any assistance would be greatly appreciated.
Thanks

SCCM 2012 SP1 - OS Deployment - hash could not be matched for the downloded content

I've got a newly deployed SCCM 2012 SP1 running on Windows Server 2012. The W2K12 runs as vm on ESX 5.1. I'm having very odd issues with OS deployment. The TS keeps failing when processing SCCM client installation - it downloads the package but then it fails
straight away with the 80091007 - hash values couldn't be matched error - some extract from smsts.log attached below. It's very consistent, it happens every time - it downloads and applies the image fine straight after that it bombs out.
What is very interesting is that it works perfectly fine when I deploy vms (on the same or different host) - the issue seems to be be only affecting physical machines (laptops desktops). This might suggest some network issues (vSwitch with Cisco switches) but
the config on the switch is very simple and this shouldn't be the case.
I had a few virtualised SCCM 2007 installations (ESX 5 and 4) and it always worked with no problems.
I tried to recreate the package (changing source directory), turn binary differential replication on and off, copy the content of the package to the dist point or not copy. Push client installation (or other package deployments) work fine
When I tried to deploy with no download - sometimes it works but most of the time I'd get the files/folder corrupt error (can't remember the No)
This is starting to drive me crazy - There are some significant changes in the way SCCM 2012 is validating package integrity (like Content Lib folder) but the consistency of this problem is just very odd.
Anyone has any clues?
thanks
- Downloaded file from http://GTKVMGMT05.GTK.LOC...m?/x64/wic_x64_enu.exe to C:\_SMSTaskSequence\Packages\GTK0000C\x64/wic_x64_enu.exe
- Download done setting progress bar to 100
VerifyContentHash: Hash algorithm is 32780
c:\_smstasksequence\packages\GTK0000c\i386 is a directory. Setting directory security
c:\_smstasksequence\packages\GTK0000c\x64 is a directory. Setting directory security
- Hash could not be matched for the downloded content. Original ContentHash = 5EF3A189C48F3469440A83026EC8ECD36EAD6EAF3B5D35663F8201BDE175413C, Downloaded ContentHash = FA4516EDD2D7907F8FA472A3E1B717DF2DD4A0976CD4CEAE11045EE62EC8C661
0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2999)
- DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3106)
- DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3331)
ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3221)
TS::Utility::ResolveSource(sClientPackageID, sClientPackagePath), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\basesetuphook.cpp,1655)
- Failed to resolve package source "GTK0000C"
- Exiting ConfigureEx: 0x80091007
- BaseSetupHook::configure(sWindowsDir), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\osdsetuphook.cpp,292)
- Failed to configure OSD setup hook (0x80091007)
- Failed to configure OSD setup hook (0x80091007)

is this the only indication of a problem in your smsts.log file ? did you apply the
authenticode hotfix or have you
downloaded the SP1 media after that hotfix was applied ?
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

Hi,
I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily.
I just installed Office 2013 on this system and have activated it as necessary. The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM. I have other systems with
Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
What can I check to try and determine what the problem is?
Thanks in advance,
Nick

Yes, the 8.1 system is a member of collection where the update deployment is targeted.
Are there any specific logs I should check in the client? If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

SCCM 2012 SP1 - R2 Upgrade Incl Windows ADK for Windows 8.1 Update

Hi All
I Need some advice
We are preparing for the upgrade SCCM 2012 SP1 -> SCCM 2012 R2
Quick steps:
1 Uninstall ADK 8.0
2 Install ADK 8.1
3 Upgrade SCCM 2012 SP1 -> SCCM 2012 R2
4 Install CU1 SCCM 2012 R2
5 Upgrade Clients to SCCM 2012 R2
6 Upgrade Clients to SCCM 2012 R2 CU1 with WSUS (SCUP)
But today I read the following article
http://blogs.technet.com/b/configmgrteam/archive/2014/04/03/understanding-the-adk-for-windows-8-1-update-and-configmgr-osd.aspx
How does this update fit in the upgrade process (add step 7 and install this update on the SCCM Server) , or is it better to leave this update because windows PE5.1 is not supported yet.
I hope someone can give me some good advice
regards and thx in advance
Johan

Hi All
So I can also use the ADK 8.1 Update with the installation , so my quick steps will be than for the upgrade SCCM 2012 SP1 -> SCCM 2012 R2
1 Uninstall ADK 8.0
2 Install the ADK 8.1 UPDATE
3 Upgrade SCCM 2012 SP1 -> SCCM 2012 R2
4 Install CU1 SCCM 2012 R2
5 Upgrade Clients to SCCM 2012 R2
6 Upgrade Clients to SCCM 2012 R2 CU1 with WSUS (SCUP)
Regards
Johan

SCCM 2012 SP1 - CMEnroll Mac OSX Password Prompt

Similar Messages

Maybe you are looking for