SCCM 2012 - SUP - updates not showing as downloaded when they actualy are

Hello. I have a strange problem.
I have collected my updates by year to have an overview of what is still updates..
In the console I have 4 updates showing as not downloaded.
If I highlight these and choose to download I get this
So appearantly it works. However these continue to show as not downloaded. R
My WSUS installation uses a SQL database on a proper sql server.
Help needed

Nothing happened in the logfile. I have no clue to what is happening. What I ended up doing was that I recreated the Software Update Group with the exact same updates and downloaded it again. Problem solved. The views in the console are made from SQL
queries. Guess the download process just didnt finish its sql job.
Old log history is of course gone but I will post the logfile here if/when it happens again.

Similar Messages

CC Bridge slow-. adjustment brushes not showing size, adjustments when done blind are slow to react

I am running Imac 2.7 GHz    16 gb ram    600 gb hard drive available
adjustment brushes not showing size, adjustments when done blind are slow to react.

Bridge is far more than a file browser.   Bridge does what lightroom does.
When working with Raw files, there are tools,   **adjustment brushes** that allow you to dodge and burn raw files.
These brushes are size adjustable and now with CC, I can not see the size of the tool I am using.
So you might want to look at Bridge differently, as it is a very powerful tool.
Anyone else have a similar experience with CC version of Bridge?

SCCM 2012 R2 Update not Downloading

Hi
i had install SCCM 2012 R2 and WSUS on the same server and i configure the software update point component .(End Point Protection) when I'm trying
to download software update, i click on All software updates repository right click and run synchronization i cant see any update.
wsyncmgr.log :
Thread terminated by service request. $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:41:50.922-330><thread=5384 (0x1508)>
SMS_EXECUTIVE started SMS_WSUS_SYNC_MANAGER as thread ID 5976 (0x1758). $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:46:27.078-330><thread=2736 (0xAB0)>
Log level 2 $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:46:27.309-330><thread=5976 (0x1758)>
Wakeup by SCF change $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 15:19:48.428-330><thread=5976 (0x1758)>
Please help

WCm log error
Remote configuration failed on WSUS Server.   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=BDC.mydomain.com SITE=NAV PID=2648 TID=5680 GMTDATE=Tue Jul 15 08:11:13.273 2014 ISTR0="BDC.mydomain.com" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=0   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
Setting new configuration state to 3 (WSUS_CONFIG_FAILED)   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
Waiting for changes for 49 minutes   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

SCCM 2012 R2 - Updates not installing

Hi all,
I have a SCCM 2012 R2 setup at a customer which has problems with distributing updates to the Windows 7 computers in the environment. The update group (with updates that are 100% sure required) is deployed to some test computers but the updates don't get
installed. It is also configured to be able to install the updates without looking at any maintenance windows. I see in the reporting that the updates are required, so in my opinion they should get installed.
I've checked the registry and the Windows Updates registry keys are pointing towards the right server (my SCCM primary site server). I've created a new software update group with fewer updates, same problem.
What I find in the UpdatesDeployment.log on one of the test machines is rather strange:
Assignment {8209BD9C-A86C-460B-99B3-CD6364F8BD1B} has total CI = 2
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment ({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) reconnected to the existing job ({779CA9E2-ABB8-43E1-B8AE-F4A94BA8C761}) successfully.
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment {c076f100-c2f7-43f9-a3f9-51fd33872b94} has total CI = 216
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment ({c076f100-c2f7-43f9-a3f9-51fd33872b94}) reconnected to the existing job ({A9758363-1871-4BD9-86D9-1BE0D82531AE}) successfully.
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
OnPolicyModify for assignment ({8209BD9C-A86C-460B-99B3-CD6364F8BD1B})...
UpdatesDeploymentAgent 29/09/2014 15:23:18
2740 (0x0AB4)
Work in progress for assignment {8209BD9C-A86C-460B-99B3-CD6364F8BD1B}, forced trigger (TriggerEnforce) will be attempted when done
UpdatesDeploymentAgent 29/09/2014 15:23:18
2740 (0x0AB4)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 29/09/2014 15:30:32
4532 (0x11B4)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 29/09/2014 15:30:32
4000 (0x0FA0)
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>'
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Removing scan history to force non cached results
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Assignment({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Assignment({c076f100-c2f7-43f9-a3f9-51fd33872b94}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Evaluation initiated for (0) assignments. UpdatesDeploymentAgent
29/09/2014 15:46:47 4836 (0x12E4)
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>True</UseCachedResults></SoftwareUpdatesMessage>'
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Assignment({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Assignment({c076f100-c2f7-43f9-a3f9-51fd33872b94}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Evaluation initiated for (0) assignments. UpdatesDeploymentAgent
29/09/2014 17:06:31 6032 (0x1790)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT START Event
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Suspend activity in presentation mode is selected
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
At least one user has elected to suspend non-business hours activity when in presentation mode. Checking for presentation mode.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Proceeding to non-business hours activites as presentation mode is off.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Auto install during non-business hours is disabled or never set, selecting only scheduled updates.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
A user-defined service window(non-business hours) is available. We will attempt to install any scheduled updates.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Attempting to install 0 updates UpdatesDeploymentAgent
29/09/2014 22:00:00 3240 (0x0CA8)
No actionable updates for install task. No attempt required.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Updates could not be installed at this time. Waiting for the next maintenance window.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT END Event
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
No current service window available to run updates assignment with time required = 1
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
Attempting to cancel any job started at non-business hours.
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
There are several updates found in the assignment (2 in the first, 216 in the second). Some of them are required but still the log says: No actionable updates.
The SERVICEWINDOWEVENT events originate from the business hours set in the client settings I suppose?
But I don't get why the log sais "No current service window available to run updates assignment with time required = 1"
Any advice?
Kind regards,
Bert

Hi,
What's the status in Software Center on clients?
Please check ScanAgent.log, WUAHandler.log, UpdatesHandler.log and Windowsupdate.log on the client to see if there is any helpful information.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Deploy SCCM 2012 Monthly updates (not with ADR), updates get expired

Hi,
I’m looking howto use monthly updates in SCCM 2012 R2. This post is showing howto with automatic deployment rules (ADR), but I’d need to do this without ADR.
http://www.windows-noob.com/forums/index.php?/topic/6799-using-system-center-2012-configuration-manager-part-9-deploying-monthly-updates/
What I do:
1.filter on updates I need
2.add them to an update group
3.distribute these updates as mandatory to our default windows 7 collection
Now everything works fine until some updates in the update group get expired. Then no updates are distributed anymore. Please advise.
J.
Jan Hoedt

Leave the expired updates and group the remaining updates (create software group fo these) and deploy to your clients.
Search the updates in sccm console: Add criteria: Expired NO
Have a look in this post (Software updates deployment without ADR)
http://www.windows-noob.com/forums/index.php?/topic/4467-using-sccm-2012-rc-in-a-lab-part-6-deploying-software-updates/
Thanks, Prabha G

On OS 5, the contacts with international format do not show the names when they call me. any idea why?

I have updated my Iphone 4 software to OS5, and since then the names of the people who call me stopped to appear and only their number is showing. after checking, i found out that the contatcs whom local phone number is saved in an international format are affected by this problem. if i save them without the country code, then their names appear.
Also, some non local numbers that are saved in the format of 00966--------- instead of +966 ------- are also not showing the name of my contact when they call me.
any idea about this knowing that the older OS version didn't have an issue with this?
Thanks

This is the same problem I have. I thought it was my phone only, but now I realize it is a common thing. I hope they release a fix to this, as they did in 2007 & 2007 when 3G was released. Will be waiting and good luck to us all.

Why does my facetime on my ipod touch say, "not available for facetime" when they actually are?, Why does my facetime on my ipod touch say, "not available for facetime" when they actually are?

Everytime I try to facetime my brother (we both have ipod touches) facetime always says, "user not available for facetime" but they are! i see that a lot of people are having this same problem, but people are giving answers to others and I try all of the answers, but none of them are working for me! Does anybody have any ideas on how to fix my ipod touch facetime? I can facetime my other brother's iphone, but i can't facetime my other brother's ipod touch! Any ideas?! Help Me!

Using FaceTime
http://support.apple.com/kb/ht4319

SCCM 2012 MOF changes not showing up on clients

Just updated my configuration.mof for getting a registry entry for a windows build rev. and it checked out well using MOFCOMP -CHECK Configuration.mof and then swapped it out with the live configuration.mof file. I then imported the reporting class
into SCCM HWInv GUI and it checked out fine. Dataloader created the tables/views in the SCCM DB and all seems well.
However, my clients are not picking up the HW inventory class updates and are not reporting in. Its been over a day so it shouldn't be replication. Where should I look to troubleshoot this?
Please help.
Thanks
Dave

Take a look at these two blogs. The first one is from the site server to the client. The second one is from the client to the site server.
http://be.enhansoft.com/post/2014/02/20/Inventory-Workflow-From-Client-Agent-Settingssms_defmofconfigurationmof-to-the-Client.aspx
http://be.enhansoft.com/post/2013/07/25/Troubleshooting-Inventory-Flow.aspx
http://www.enhansoft.com/

Whenever I download anything , my download box in tools is behaving very odd. It does not show my downloads as they are being downloaded (1) and (2), it is automatically clearing them be fore I can decide where and how to open them. Any help?

If I download files, pictures, programs, etc. the download box pops up, but rather than remaining in a list(?) so I can download later , it just pops up and then disappears. This does not allow me to scan for virus', nor does it allow me to decide , or find, the download easily. It also clears the list, even if I don't want to clear the list ! What up?

What email program are you using? And what do you mean by "Safari mail"?

Treo not showing KNOWN people when they call. And another issue.....

When people/numbers that are IN my phonebook call me, my phone just shows the number and it says Unknown caller... After the call is complete...it doesn't ask me to add the unknown number(even though that option is checked in the phone preferences) Whats going on with my phone?
Thank you
Post relates to: Treo 755p (Sprint)

Hello!
Appears that a preference settings file for the phone app is not working. Using Sprint right? Try to soft reset the phone first and if that is a nogo, try a hard reset and resync the phone to get the data back. Be sure to hotsync your phone first to back it up for the hard reset does erase ALL data off the phone.
Post relates to: Treo 650 (Unlocked GSM)
Message Edited by thetreoguy on 08-20-2008 01:28 PM

Why does my iPhone say that certain songs are not on my iPhone when they clearly are?

Using the new "Purchased" button on the bottom of the iTunes app on my iPhone, when I tap "Not On This iPhone", it lists songs that are definitely on my iPhone. Is there a way to fix this?
Furthermore, there are 47 pending downloads that I want to clear from the Downloads list. Is there any way to clear them or am I going to have to download them all and delete them?

The "streaming" that iTunes Match does is not the traditional streaming we are used to. iOS 6 actually downloads the song to non-permanent memory on the iOS device in a cache. The advantage of this is it then makes the tracks available for listening to again without having to stream it again. You can clear out the cache by either power cycling the device or disabling/enabling iTM. I prefer doing the former.

SCCM 2012 SP1 Update to CU5 not showing version 1600 for clients updated !

Recently upgraded SCCM 2012 SP1 and its showing a version of 5.0.7804.1600 as it should be. Pushed out the CU 5 client manager update to few machines and they are also showing .1600 as the version, however in SCCM 2012 manager itself it is not updating the
status of those machines from say .1000 or .1400 to .1600. Why is this happening and any solution for it ? I have also updated the CM on the server hosting the SCCM and is current to .1600 version.

Because the client agent version is returned from clients via heartbeat discovery which only occurs by default every 7 days. Thus, you need to be patient. Note that I generally recommend reducing the heartbeat cycle to at least once a day partly for
this reason.
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2012 software update point not sync with Microsoft Updat,

Hi
Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error. can any one suggest/help me how to resolve this issue.
WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

am just trying to tracert catalog.update.microsoft.com
from my wsus server but it is failed, would that be the reason/
Regards,
Madhan

Why is the software update not showing up in general settings?

Why does my software update not show up in general settings?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

SCCM 2012 - SUP - updates not showing as downloaded when they actualy are

Similar Messages

Maybe you are looking for