SCE 2020 2.5.10 to 3.1.1 upgrade failing
I have tried to upgrade an SCE2020 4xGBE running 2.5.10 version to 3.1.1. It all went ok except the part with the PQI install file.
It's goes to upgrade the application file, but when it gets to
"Assining new SLI... 42%.. it fails and says: Failed to load the eng3119.sli because of some error in function LoadGraphToAllRucs
Any ideas?
Hello,
I've tried resetting the device to it's factory defaults, formatting the file system and many other things. The box is still unusable and the OS can't be upgraded. The error is still the same. There was a single version that installed the PQI but when a traffic passes through the box a watchdog is restarting the system, but i can't remember which one.
You can try with a TAC request...
If they come up with a solution, will greatly appreciate any help.
Regards
Similar Messages
-
I am trying to figure out how to retrieve the output of the comannd "show party all-names" via SNMP.
Does anybody have some suggested OID strings I could try?
here is my sh ver:
sce1#sh ver
System version: Version 3.6.0 Build 716
Build time: Mar 28 2010, 12:34:53 (Change-list 600192)
Software version is: Version 3.6.0 Build 716
Cryptography class: K9
Hardware information is:
rx : 0x0079
dp : 0x1d08
tx : 0x1712
ff : 0x0077
cls : 0x1e05
cpld : 0x0025
lic : 0x0202
lic-drv : 0x02020000
lic-prm : 0x02020000
rev : G001
Bootrom : 2.1.0
L2 cache : Samsung 0.5
lic type : 4GBE
optic mode : MM
Product S/N : CAT1425G00V
Product ID : SCE2020-4XGBE-MM
Version ID : V04
Deviation :
Part number : 800-26601-08
Revision : C1
Software revision : G001
LineCard S/N : CAT1422G00Z
Power Supply type : AC
SML Application information is:
Application file: /tffs0/release_.sli
Application name: Engage SML Version 3.6.0 build 126 (Protocol Pack 21 build 24)
Using Lib - PL_V3.6.0PP_B24
Using Lib - Classifier_V3.6.0_B24
Application help: Entry point of Engage
Original source file: /auto/srbu-proj1/apps/users/obenreph/autoBuild/App/SML/Engage/V3.6.0/src/com/pcube/AppTemplate/Main/template_app_main.san
Compilation date: Mon, April 26, 2010 at 09:04:40
Compiler version: SANc v3.20 Build 14 built on: Tue 08/04/2009 06:58:22.;SME plugin v1.1
Capacity option used: 'EngageDefaultSCE2000'.
Logger status: Enabled
Platform: SCE2000 - 4xGBE
Management agent interface version: SCE Agent 3.6.0 Build 429
Software package file: ftp://ftpserver/C:\Documents and Settings\btadlock\Desktop\scos-v360-b716-sce2000-k9.pkgHi Olaf,
The lwapp APs are not snmp-manageable but the controllers takes care of that. You can poll the WLC via SNMP and it will give you the radio status of all the APs.
I suggest using the Cisco MIB browser tool to find out more about the AIRESPACE mib that the WLC is using.
Nicolas -
Dear Sirs!
What I can change IP address????
I try....
SCE2000(config if)#>ip address 192.168.55.221 255.255.255.0
and get!
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ NOTE: SCE reload is required for the new IP/subnet to take effect !!! +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Error - setting new IP address failed.
Also, I try to erase startup config, but it not erased!
Please help me.
Thank!I was resolved this trouble.
I configured IP and mask, in the VxWorks.
When it boot, I canceled auto boot and use " c - change boot params" command:
inet on ethernet (e) : 192.168.55.55:ffffff00
after this, all work good -
SCE loses Quota Below Threshold events in cutoff redundancy mode
Hi all,
We are implementing a inline cascade topology with 2 SCE 2020 devices and the action on the SCE failure is cutoff and we are experiencing delay in "Quota Below Threshold" events.The events consequently generated upon quota depletion (i.e. "Quota Below Threshold" and "Quota Depleted") do appear, but meanwhile the subscriber experiences temporarily loss of service. The most important implication is that the subscriber loses all open downloading sessions. We haven't experienced such an issue while we were working in the "bypass" redundancy mode.
Here follows an excerpt of our logs which indicate the problem while a subscriber has been downloading a file. The logs are generated by the API quota listeners at the lowest level. The quotas that get replenished each time are 50Mb. The quota threshold was set to 20Mb (from the default 10Mb) in an effort to mask off the problem, but unfortunately it persisted. The downloading rate wasn't high enough to justify a rapid replenishment of quotas.
2011-05-06 17:40:26,499 DEBUG [handlers.SceQuotaListener] Handling Quota event for subscriber xxx with quota 16426 and type QUOTA_EVENT_TYPE_STATUS
2011-05-06 17:40:41,491 DEBUG [handlers.SceQuotaListener] Handling Quota event for subscriber xxx with quota 10161 and type QUOTA_EVENT_TYPE_BELOW_THRESHOLD
2011-05-06 17:41:41,759 DEBUG [handlers.SceQuotaListener] Handling Quota event for subscriber xxx with quota 7668 and type QUOTA_EVENT_TYPE_BELOW_THRESHOLD
[... QBT event ???]
2011-05-06 17:42:41,819 DEBUG [handlers.SceQuotaListener] Handling Quota event for subscriber xxx with quota -910 and type QUOTA_EVENT_TYPE_BELOW_THRESHOLD
2011-05-06 17:42:41,823 DEBUG [handlers.SceQuotaListener] Handling Quota event for subscriber xxx with quota -910 and type QUOTA_EVENT_TYPE_DEPLETED ...
We are of the impression that the quota below threshold or depletion conditions are detected after a small delay of 2-3 seconds. Is it possible that this detection gets delayed somehow under certain conditions?
Thank you in advanceRapid use of quota does explain this behavior but seems like you are already aware of this situation.
Just to be sure, The Threshold should be set by evaluating the volume that the fastest subscriber in the system can consume in 30 seconds period. In your policy this would be both upstream + downstream the fastest subscriber can get (since quota is calculated in both directions). So the volume which the subscriber can consume with such a rate for 30 second period should be a guideline for setting the threshold value (threshold should be set significantly higher than this value).
The QM uses a Sliding Window Model for measuring subscriber consumption -
http://www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/rel36x/qm_sol/01_overview.html#wp1053153
The Remaining Quota interval is configured in the SCA-BB GUI (at the RDRs section). What have you configured it as?
Can you increase the quota replenishment limit to 100megs from 50 megs and leave the below threshold limit to 20 megs.
Also not sure if you already have this but this link and the paragraph below may help:
http://www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/rel355/qm_sol/02_scenarios.html#wp1053156
Maximizing Quota Accuracy
One of the most important aspects of the quota manager is accuracy of the quota levels for any subscriber. When you provision quota using an external server, a trade-off exists between quota accuracy and the number of network messages.
To maximize accuracy, configure the rate of the periodic remaining quota indication to a high value, and configure the size of the quota dosage to a small value. A configuration causes performance degradation due to the high number of messages being generated in the network.
Quota inaccuracies may occur during the changeover from one aggregation period to the next, or due to SCE fail-over. The level of inaccuracy depends on the configuration of the following parameters:
•Rate of the periodic remaining quota indications
•Quota dosage value
During an aggregation period changeover, the following occurs until the first quota indication is received in the new aggregation period:
•Any quota consumed by the subscriber is subtracted from the previous aggregation period.
•The quota dosage value limits the size of any quota error.
•The interval between the remaining quota indications limits the length of time during which consumed quota is subtracted from the previous aggregation period.
In cases of SCE fail-over, the following occurs between the last quota indication in the failed SCE and the first quota indication in the new, active SCE:
•Any quota consumed by the subscriber is not removed from the subscriber buckets.
•The quota dosage value limits the size of any quota error.
•The length of time during which quota is consumed is limited by the interval between the remaining quota indications.
In all cases of inaccuracy, the quota remaining is calculated in favor of the subscriber. The only exception is if the aggregation period changeover occurs when the subscriber quota is already breached.
Shelley. -
SCE Backup fail with Version 3.6.5 Build 489
Hello,
I upgraded my SCE 2020 and now can't do a subscriber backup on local Disk
Subscriber backup failed on SCE 2020 Version 3.6.5 Build 489:
sce#>conf
sce(config)#>interface LineCard 0
sce(config if)#>subscriber export csv-file subsback.csv
0 subscriber(s); 0 error(s)
sce(config if)#>
But I have 1298 subscribers !!!
sce#>show interface linecard 0 subscriber all-names
There are 1298 subscribers in the data-base:
N/A
subscriber1
subscriber2
subscriber3
subscriber1298
sce#>
(These commands worked well with old Firmare 3.5.0 Build 407).
Any idea about the problem ? It's a new Bug ?
Thanks for comments.
Best regards.
SebHi,
This is Shelley from Cisco TAC. I support the SCE.
This is a bug and was identified a few weeks ago. I would like you to open a TAC case so that we can track and monitor user affected by this bug. Once you open the case, we will provide you with the Bug ID as well (at this time it is internal hence cannot share)
Hope this answers your query.(Please mark complete if so and rate.)
Shelley Bhalla
CCIE #20002
Cisco TAC - Carrier services -
SCE pcube-SE-MIB traffic-counters error
Hi,
On both the SCE 1010 and SCE 2020, I am seeing the following error:
#sh snmp MIB pcube-SE-MIB traffic-counters
Error - internal error: was not able to retreive Traffic-Counter information
I am running the following version:
#sh ver
System version: Version 3.6.1 Build 13
Build time: Jul 25 2010, 23:45:29 (Change-list 631208)
Software version is: Version 3.6.1 Build 13
Does anyone know why traffic-counters is returning this error when all of the other pcube-SE-MIB sub-options work?
#sh snmp MIB pcube-SE-MIB subscriber
subscribersNumIntroduced = 0
subscribersNumFree = 199999
subscribersNumIpAddrMappings = 0
subscribersNumIpAddrMappingsFree = 200000
subscribersNumIpRangeMappings = 0
subscribersNumIpRangeMappingsFree = 7972
subscribersNumVlanMappings = 0
subscribersNumVlanMappingsFree = 0
subscribersNumTpIpRanges = 0
subscribersNumTpIpRangesFree = 0
subscribersNumActive = 0
subscribersNumActivePeak = 1
subscribersNumActivePeakTime = 5 weeks, 5 days, 7 hours, 58 minutes, 16 seconds
subscribersNumUpdates = 2
subscribersCountersClearTime = 5 weeks, 5 days, 8 hours, 1 minutes, 28 seconds
subscribersNumAnonymous = 0
Regards, Brett.Hi Brett,
Did you configure traffic-counter on SCE ?
If there is no configuration of traffic-counter, you can see this error.
Can you try to configure as following ?
SCE2000#>conf
SCE2000(config)#>interface LineCard 0
SCE2000(config if)#>traffic-counter name test count-bytes
SCE2000(config if)#>end
SCE2000#>show snmp MIB pcube-SE-MIB traffic-counters
trafficCounterIndex.1.1 = 1
trafficCounterValue.1.1 = 0
trafficCounterName.1.1 = test
trafficCounterType.1.1 = bytes
Error - internal error: was not able to retreive Traffic-Counter information
SCE2000#>
Thanks,
Keita -
Problems with Sybase Database for Collection Manager in SCE2020
We have problems with Sybase Database for Collection Manager in a SCE2020. The status is:
[root@btl-sce-cm log]# ~scmscm/setup/alive.sh STATUS OK [root@btl-sce-cm monitor]# ./monitor.sh -a -d Test: 01db_up.sh. Status: FAIL. Message: DB is not running Test: 02cm_up.sh. Status: PASS. Message: CM is running Test: 03free_db.sh. Status: PASS. Message: 99% free space in data db Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter TAAdapter [root@btl-sce-cm monitor]# ~scmscm/scripts/dbtables.sh /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: is a directory Executing query ... /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: is a directory [root@btl-sce-cm monitor]# df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00 149559596 138280700 3681636 98% / /dev/sda1 101086 20685 75182 22% /boot none 1036624 0 1036624 0% /dev/shm
We restored the Sybase database, but we have problems to access the database from Collection Manager and we can't obtain reports from SCE 2020.
Here is the info:
Problem Details: The SCA Reporter cannot generate Reports, the CM diagnostics show the following:
[root@btl-sce-cm ~]# ~scmscm/setup/alive.sh STATUS OK
[root@btl-sce-cm ~]# ~scmscm/scripts/dbfree.sh
Name % Data Free % Log Free
Database 55 99
[root@btl-sce-cm ~]# ~scmscm/scripts/dbtables.sh
/home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: No such file or directory Executing query ...
/home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: No such file or directory
[root@btl-sce-cm ~]# ~scmscm/setup/monitor/monitor.sh -d -a
Test: 01db_up.sh. Status: FAIL. Message: DB is not running
Test: 02cm_up.sh. Status: PASS. Message: CM is running
Test: 03free_db.sh. Status: PASS. Message: 55% free space in data db
Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db
Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter
Message was edited by: EMILIO MENCIATomo:
we have problems with our reports in Collection Manager again. We reboot the CM, but the problems continue.
This is the log of the CM. What can be the problem? Thanks tomo
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of User Accounts during current sample period: 3.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of User Accounts since startup: 3.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Configured Number of User Connections during current sample period: 200.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Configured Number of User Connections since startup: 200.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Number of User Connections during current sample period: 15.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Number of User Connections since startup: 18.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of user seat licenses used during current sample period: 1.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of user seat licenses used since startup: 3.
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.78 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.86 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.92 server Error: 1608, Severity: 18, State: 4
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 kernel extended error information: hostname: btllt0012 login: pqb_admin
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server Error: 1608, Severity: 18, State: 4
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel extended error information: hostname: btllt0012 login: pqb_admin
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server Error: 632, Severity: 20, State: 2
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server Attempt to move memory with an incorrect length
of -794444483. Maximum allowed length is 16384.
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel ************************************
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel SQL causing error : =
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel ************************************
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel curdb = 4 tempdb = 2 pstat = 0x10000
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel lasterror = 632 preverror = 0 transtate = 3
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel curcmd = 0 program =
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel extended error information: hostname: btl-sce-cm login: pqb_admin
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d40ca3 pcstkwalk+0x31b(0x9a78fdbc, 0x9a78fb6c, 0x0000270f, 0x00000002, 0x9a78fb6c)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d40832 ucstkgentrace+0x13a(0x68a4006f, 0x00000002, 0x0000270f, (nil), (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08ce346d ucbacktrace+0x5d((nil), 0x00000001, (nil), 0x00000003, 0x20202020)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x082f19b8 terminate_process+0xa5c((nil), 0xffffffff, 0x9a7904c4, 0x08349a96, 0x00000278)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08349acb close_network+0xf(0x00000002, 0x9ced1ea0, 0x9a790544, 0x0834902e, 0x00000006)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08349aad hdl_default+0x45(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0x9a7904fc)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0834902e ex_raise+0x18a(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0xd0a5bd3d)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08357c9b memmove_error+0x27(0xd0a5bd3d, 0x00004000, 0xffffffff, 0x0896b8a4, 0x9e3d7cfc)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0833e54e recvhost+0xbe(0x9a7909ec, 0xd0a5bd3d, 0x00000018, 0x9e44d5d8, 0x9e44d52c)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08339160 recvchars+0x74(0x9ced2a1c, 0xd0a5bd3d, 0x9a7909ec, 0x000000ff, (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0831e237 tdsrecv_declare+0x207(0x00000010, 0x9cecb914, 0x9a7911b4, 0x0832dd5f, (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel [Handler pc: 0x0x0863eca4 ut_handle installed by the following function:-]
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0832e3a9 conn_hdlr+0xe49(0x00000030, 0x9a7911c8, 0x895eed31, (nil), (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d33984 kpexit((nil), (nil), (nil), 0x9a020900, 0x00000070)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel end of stack trace, spid 11, kpid 1755578479, suid 3
AFTER RESTART
ov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel SySAM: Checked out license for 1 ASE_CORE (2010.04040/permanent/148F 853E 92A9 E302).
Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel This product is licensed to: CISCO SYSTEMS, and OEM license from Sybase, Inc.
Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel Checked out license ASE_CORENov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel Adaptive Server Enterprise (Small Business Edition)
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.02 kernel Using config area from primary master device.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.17 kernel Locking shared memory into physical memory.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.22 kernel Internal run-time model set for Linux - Native
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using 1024 file descriptors.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Adaptive Server Enterprise/15.0.2/EBF 14331/P/Linux Intel/Linux 2.4.21-47.ELsmp i686/ase1502/2486/32-bit/FBO/Thu May 24 08:15:50 2007
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Confidential property of Sybase, Inc.Nov 28 09:19:07 localhost messagebus: messagebus startup succeeded
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Copyright 1987, 2007
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Sybase, Inc. All rights reserved.
Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Unpublished rights reserved under U.S. copyright laws.
Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel
Nov 28 09:19:08 localhost rhnsd[27742]: Red Hat Network Services Daemon starting up.
Nov 28 09:19:08 localhost rhnsd: rhnsd startup succeeded
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel This software contains confidential and trade secret information of Sybase,
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Inc. Use, duplication or disclosure of the software and documentation by
Nov 28 09:19:09 localhost cups-config-daemon: cups-config-daemon startup succeeded
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel the U.S. Government is subject to restrictions set forth in a license
Nov 28 09:19:09 localhost haldaemon: haldaemon startup succeeded
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel agreement between the Government and Sybase, Inc. or other written
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel agreement specifying the Government's rights to use the software and any
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel applicable FAR provisions, for example, FAR 52.227-19.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using /opt/sybase as the 'SYBASE' environment variable, found during startup.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel ASE booted on Linux release 2.6.9-78.0.13.ELsmp version #1 SMP Wed Jan 7 17:52:47 EST 2009.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Using '/opt/sybase/ASE-15_0/pqbsyb1.cfg' for configuration information.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Logging ASE messages in file '/opt/sybase/ASE-15_0/install/pqbsyb1.log'.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Platform TCP network is forced to IPv4-only.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.32 kernel ASE booted with TCP_NODELAY enabled.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel SSL Plus v5.0.4 security modules loaded successfully.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel Network and device connection limit is 1009.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server Number of blocks left for proc headers: 12760.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server Proc header memory allocated 2552 pages for each per engine cache
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server Size of the 16K memory pool: 307200 Kb
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server Memory allocated for the default data cache cachelet 1: 307200 Kb
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Enabling Linux Native Kernel asynchronous disk I/O strategy.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Initializing virtual device 0, '/opt/sybase/data/master.dat' with dsync 'on'.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Virtual device 0 started using asynchronous i/o.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.17 server Loaded default Unilib conversion handle.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.56 kernel Worker Thread Manager is not enabled for use in ASE.
Nov 28 09:19:12 localhost fstab-sync[28568]: removed all generated mount points
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mechanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel Unix interval timer enabled for sysclk interrupts.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.85 kernel Begin processing to generate RSA keypair.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel Completed processing to generate RSA keypair.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel Encryption provider initialization succeeded on engine 0.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel engine 0, os pid 27618 online
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 server No active traceflags
Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.08 kernel libomni1 - Component Integration Services: usin
g 'Sybase Client-Library/15.0/P-EBF14165 ESD #7/DRV.15.0.3/Linux Intel/Linux 2.4.21-47.0.1.ELsmp i686/BUILD1500-093/OPT/Wed Dec 13 21:46:44 2006'
Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.10 server Opening Master Database ...
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.66 server Loading ASE's default sort order and character set
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.83 server Recovering database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.92 server Started estimating recovery log boundaries for database 'master'.
Nov 28 09:19:14 localhost kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Database 'master', checkpoint=(1831, 20), first=(1831, 20), last=(1831, 32).
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Completed estimating recovery log boundaries for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Started ANALYSIS pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Completed ANALYSIS pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Log contains all committed transactions until 2011/11/27 13:28:54.20 for database master.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Started REDO pass for database 'master'. The total number of log records to process is 13.
Nov 28 09:19:14 localhost fstab-sync[28716]: added mount point /media/cdrecorder for /dev/scd0
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Redo pass of recovery has processed 4 committed and 0 aborted transactions.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Completed REDO pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Recovery of database 'master' will undo incomplete nested top actions.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Started recovery checkpoint for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.38 server Completed recovery checkpoint for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.56 server Started filling free space info for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.24 server Completed filling free space info for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server Started cleaning up the default data cache for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server Completed cleaning up the default data cache for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.42 server Checking external objects.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server Database 'master' is now online.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server The transaction log in the database 'master' will use I/O size of 16 Kb.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.67 server Warning: ASE_HA has no valid license and therefore is not initialized.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.73 server server name is 'pqbsyb1'
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.90 server Activating disk 'sysprocsdev' of size 126976 KB.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel Initializing virtual device 1, '/opt/sybase/data/sysprocs.dat' with dsync 'on'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel Virtual device 1 started using asynchronous i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 server Activating disk 'systemdbdev' of size 49152 KB.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel Initializing virtual device 2, '/opt/sybase/data/sybsysdb.dat' with dsync 'on'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel Virtual device 2 started using asynchronous i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 server Activating disk 'apricot_data1' of size 35082660 KB.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel Initializing virtual device 3, '/opt/sybase_data/apticotdata.dat' with dsync 'off'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel Virtual device 3 started using asynchronous (with DIRECTIO) i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 server Activating disk 'apricot_log1' of size 2980002 KB.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel Initializing virtual device 4, '/opt/sybase_data/apricotlog.dat' with dsync 'off'.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel Virtual device 4 started using asynchronous (with DIRECTIO) i/o.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 server Activating disk 'tempdb_dev' of size 1048576 KB.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel Initializing virtual device 5, '/opt/sybase_data/tempdb.dat' with dsync 'off'.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel Virtual device 5 started using asynchronous i/o.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.30 server Recovering database 'sybsystemdb'.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.32 server Started estimating recovery log boundaries for database 'sybsystemdb'.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Database 'sybsystemdb', checkpoint=(843, 106), first=(843, 106), last=(843, 106).
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Started ANALYSIS pass for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Completed ANALYSIS pass for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemdb.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Completed REDO pass for database 'sybsystemdb'.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Started recovery checkpoint for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.46 server Completed recovery checkpoint for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.58 server Started filling free space info for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.69 server Completed filling free space info for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Started cleaning up the default data cache for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Completed cleaning up the default data cache for database 'sybsystemdb'.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Boot Count: 13
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.81 server Checking external objects.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:14.18 server The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.59 server Completed recovery checkpoint for database 'model'.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.70 server Started filling free space info for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.72 server Completed filling free space info for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server Started cleaning up the default data cache for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server Completed cleaning up the default data cache for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.77 server Checking external objects.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.07 server The transaction log in the database 'model' will use I/O size of 16 Kb.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server Database 'model' is now online.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server The logical pagesize of the server is 16 Kb.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server 0 dump conditions detected at boot time
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server Clearing temp db
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:18.37 server Processed 27 allocation unit(s) out of 262 units (allocation page 6656). 10% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:19.51 server Processed 53 allocation unit(s) out of 262 units (allocation page 13312). 20% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:20.81 server Processed 79 allocation unit(s) out of 262 units (allocation page 19968). 30% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:22.19 server Processed 105 allocation unit(s) out of 262 units (allocation page 26624). 40% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:23.52 server Processed 131 allocation unit(s) out of 262 units (allocation page 33280). 50% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:24.96 server Processed 158 allocation unit(s) out of 262 units (allocation page 40192). 60% completed.
Nov 28 09:19:27 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:27.08 server Processed 184 allocation unit(s) out of 262 units (allocation page 46848). 70% completed.
Nov 28 09:19:29 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:29.94 server Processed 210 allocation unit(s) out of 262 units (allocation page 53504). 80% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.01 server Processed 236 allocation unit(s) out of 262 units (allocation page 60160). 90% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.57 server Processed 262 allocation unit(s) out of 262 units (allocation page 66816). 100% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.84 server The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.86 server Database 'tempdb' is now online.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.06 server Recovering database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.08 server Started estimating recovery log boundaries for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Database 'sybsystemprocs', checkpoint=(6333, 93), first=(6333, 93), last=(6333, 93).
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed estimating recovery log boundaries for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started ANALYSIS pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed ANALYSIS pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemprocs.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started REDO pass for database 'sybsystemprocs'. The total number of log records to process is 1.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed REDO pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Recovery of database 'sybsystemprocs' will undo incomplete nested top actions.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started recovery checkpoint for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.18 server Completed recovery checkpoint for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.20 server Started filling free space info for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.39 server Completed filling free space info for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server Started cleaning up the default data cache for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server Completed cleaning up the default data cache for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.41 server Checking external objects.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.04 server The transaction log in the database 'sybsystemprocs' will use I/O size of 16 Kb.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.09 server Database 'sybsystemprocs' is now online.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel network name localhost.localdomain, interface IPv4, address 10.1.1.33, type tcp, port 4100, filter NONE
Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel network name localhost.localdomain, interface IPv4, address 127.0.0.1, type tcp, port 4100, filter NONE
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the size of '128K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the size of '16K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the '128K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the '16K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server The server will recover databases serially.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.81 server Recovering database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.82 server Started estimating recovery log boundaries for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Database 'apricot', checkpoint=(2358271, 12), first=(2358271, 11), last=(2358275, 172).
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Completed estimating recovery log boundaries for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Started ANALYSIS pass for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Completed ANALYSIS pass for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Log contains all committed transactions until 2011/11/28 09:16:20.68 for database apricot.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Started REDO pass for database 'apricot'. The total number of log records to process is 846.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server Redo pass of recovery has processed 2 committed and 138 aborted transactions.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server Completed REDO pass for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server Recovery of database 'apricot' will undo incomplete nested top actions.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server Started recovery checkpoint for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.29 server Completed recovery checkpoint for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.35 server Started filling free space info for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.47 server Completed filling free space info for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server Started cleaning up the default data cache for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server Completed cleaning up the default data cache for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.55 server Checking external objects.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.30 server The transaction log in the database 'apricot' will use I/O size of 16 Kb.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.31 server Database 'apricot' is now online.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server Recovery has restored the value of 'local async prefetch limit' for '128K' pool in 'default data cache' from '80' to 'DEFAULT'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server Recovery has restored the value of 'local async prefetch limit' for '16K' pool in 'default data cache' from '80' to 'DEFAULT'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.40 server Recovery has restored the original size for '128K' pool and '16K' pool in 'default data cache'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.44 server Recovery complete.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server ASE's default unicode sort order is 'binary'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server ASE's default sort order is:
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server 'bin_iso_1' (ID = 50)
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server on top of default character set:
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server 'iso_1' (ID = 1).
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server Master device size: 240 megabytes, or 122880 virtual pages. (A virtual page is 2048 bytes.)
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel Cannot send, host process disconnected: btl-sce-cm suid: 3
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server Error: 1608, Severity: 18, State: 3
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel extended error information: hostname: btl-sce-cm login: pqb_admin
Nov 28 09:38:27 localhost sshd(pam_unix)[29201]: session opened for user root by (uid=0) -
Hello,
I upgrade the Broadband system, include SCE 2020, CM and SCA BB from 3.0.6 to 3.6.5.
The issue is I when open SCA BB with the configuration file create in 3.0.6, I can´t make any change in the rule.
The only way to make modification is open the SCA BB whitout any configuration and begin to make the rule again.
I think, the old configuration file is awere in the new version, but is not possible work until is change to the new version.
Someone help me to find the way the migration this file too.
Thank you all.Please post in the correct forum for this question:
https://supportforums.cisco.com/community/netpro/service-providers/others -
How to update Portal 10.1.2 to 10.1.4 under multiportal environment ?
I install two portal and one infra.
And Configuring Multiple Middle Tiers with a Load Balancing Router successfully.
The origin portal virsion is 10.1.2.
Now i want to update to 10.1.4 but have somthing wrong after I enter the update commond.
Error message is java.SQLException: IO Exception : connection is reset.
Then I run de upgrade command again , get the different error message
### ERROR: OracleAS Portal 10.1.4 upgrade precheck failed. See /raid/product/OraHome_1/upgrade/temp/portal/precheck.log for details.
Error: Component upgrade failed PORTAL
Error: PORTAL component version is: 10.1.2.0.2 INVALID
FAILURE: Some OracleAS plug-ins report failure during upgrade.
The Portal Upgrade precheck log is follow:
-- Portal Upgrade release information: 10.1.4 Release 1
Upgrade Started in -precheck -force mode at Wed Oct 18 21:22:19 2006
### PHASE 1: Initial setup
Existing temporary directory /raid/product/OraHome_1/upgrade/temp/portal/prechktmp renamed to /raid/product/OraHome_1/upgrade/temp/portal/prechktmp.Wed-Oct-18-21.14.10-2006
Existing log file /raid/product/OraHome_1/upgrade/temp/portal/precheck.log renamed to /raid/product/OraHome_1/upgrade/temp/portal/precheck.log.Wed-Oct-18-21.14.10-2006
Creating /raid/product/OraHome_1/upgrade/temp/portal/prechktmp directory
Creating /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/gen directory
Welcome to the Oracle Portal Production Upgrade
The script will lead you through the upgrade step by step.
For questions asked in this script that have appropriate defaults
those defaults will be shown in square brackets after the question.
To accept a default value, simply hit the Return key.
### Set New Variables and Validate Environment Variables
Step started at Wed Oct 18 21:22:19 2006
PERL5LIB set to ../../../perl/lib/site_perl/5.6.1/i686-linux:../../../perl/lib:../../../perl/lib/5.6.1
Check SQL*Plus version
Running upg/frwk/upchkpls.sql### Log shared and environment variables
Step started at Wed Oct 18 21:22:19 2006
Log file: /raid/product/OraHome_1/upgrade/temp/portal/precheck.log
Log dir: /raid/product/OraHome_1/upgrade/temp/portal/prechktmp
Profile dir: /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/gen
Verbose flag: 0
Debug mode: 0
Force flag: 1
Nosave flag: 0
Save flag: 1
Repos flag: 0
Compile flag: 0
Oldver flag: 0
isPatch flag: 0
Will save Tables: 1
Environment variables:
===========================================================
DISPLAY: :0
G_BROKEN_FILENAMES: 1
HISTSIZE: 1000
HOME: /home/oracle
HOSTNAME: portal1.bizmatch.com.cn
IBPATH: /usr/bin
INPUTRC: /etc/inputrc
KDEDIR: /usr
LANG: en_US.UTF-8
LC_CTYPE: en_US.UTF-8
LD_ASSUME_KERNEL: 2.4.19
LD_LIBRARY_PATH: /raid/product/OraHome_1/lib32:/raid/product/OraHome_1/lib:/raid/tmp/jdk/jre/lib/i386/client:/raid/tmp/jdk/jre/lib/i386:/raid/tmp/jdk/jre/../lib/i386:/raid/product/OraHome_1/lib32:/raid/product/OraHome_1/network/lib32:/raid/product/OraHome_1/lib:/raid/product/OraHome_1/network/lib:/raid/product/OraHome_1/lib:/usr/lib:/usr/local/lib
LD_LIBRARY_PATH_64: /raid/product/OraHome_1/lib:/raid/product/OraHome_1/lib32:/raid/product/OraHome_1/network/lib32:/raid/product/OraHome_1/lib:/raid/product/OraHome_1/network/lib:
LESSOPEN: |/usr/bin/lesspipe.sh %s
LIBPATH: /raid/product/OraHome_1/lib32:/raid/product/OraHome_1/lib
LOGNAME: oracle
LS_COLORS: no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL: /var/spool/mail/oracle
NLSPATH: /usr/dt/lib/nls/msg/%L/%N.cat
ORACLE_BASE: /raid/product
ORACLE_HOME: /raid/product/OraHome_1
ORACLE_SID:
PATH: /raid/product/OraHome_1/bin:../../../perl/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/raid/product/OraHome_1/bin:/usr/local/sbin:/usr/bin/X11:/usr/X11R6/bin:/home/oracle/bin:/bin:/sbin:/usr/bin
PERL5LIB: ../../../perl/lib/site_perl/5.6.1/i686-linux:../../../perl/lib:../../../perl/lib/5.6.1
PWD: /raid/tmp/mrua
QTDIR: /usr/lib/qt-3.3
REPCA_ORACLE_HOME: /raid/tmp
SHELL: /bin/bash
SHLIB_PATH: /raid/product/OraHome_1/lib32:/raid/product/OraHome_1/lib
SHLVL: 3
SQLPATH: .:owa:/raid/product/OraHome_1/upgrade/temp/portal/prechktmp/gen:upg/frwk:sql:wwc
SSH_ASKPASS: /usr/libexec/openssh/gnome-ssh-askpass
TERM: xterm
USER: oracle
XAUTHORITY: /root/.Xauthority
XFILESEARCHPATH: /usr/dt/app-defaults/%L/Dt
_: /raid/tmp/jdk/bin/java
### PHASE 2: User inputs
Upgrade phase started at Wed Oct 18 21:22:19 2006
Processing Metadata File: upg/common/inputchk/inputchk.met Running upg/common/inputchk/inputchk.pl ### Verify that the database has been backed up
Step started at Wed Oct 18 21:22:19 2006
Before beginning the upgrade, it is important that you backup your database.
Have you backed up your database (y/n)? [y]: y
Ask user for schema and database details
Enter the name of schema that you would like to upgrade [PORTAL]: portal
Enter the password for the schema that you would like to upgrade [portal]:
Enter the password for the SYS user of your database [CHANGE_ON_INSTALL]:
Enter the TNS connect string to connect to the database [ORCL]: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=portaldb.bizmatch.com.cn)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=IASDB.bizmatch.com.cn)))
Responses to the above questions will now be recorded in the file
upgrade.in. Placeholders are recorded instead of actual passwords,
for security reasons. If you wish, this file can be edited and used
as the standard input for a subsequent run of upgrade.pl.
### Verify database connection information.
Step started at Wed Oct 18 21:22:19 2006
Validating the connection information supplied by the user
Running CheckConnections()Check connection to the Portal repository.
Check connection as SYS to the Portal repository.
Ending CheckConnections() Wed Oct 18 21:22:19 2006
### PHASE 3: Setup
Upgrade phase started at Wed Oct 18 21:22:19 2006
Processing Metadata File: upg/common/setup/setup.met Running upg/common/setup/setup.pl Analyzing the product schema
Running upg/common/setup/upgettbs.sqlPortal SQL script started at Wed Oct 18 21:22:19 2006
Connected.
### Install messaging framework
Step started at Wed Oct 18 21:22:19 2006
Portal SQL script started at Wed Oct 18 21:22:19 2006
Connected.
No errors.
No errors.
Creating sequence 'wwpof_output_id_seq'
Creating sequence 'wwpof_output_script_run_id_seq'
Creating table 'wwpof_output$'
Creating table 'wwpof_msg$'
Creating index 'wwpof_output_idx1' in tablespace PORTAL
Creating index 'wwpof_output_idx2' in tablespace PORTAL
Creating index 'wwpof_output_idx3' in tablespace PORTAL
Creating index 'wwpof_msg_uk1' in tablespace PORTAL
No errors.
No errors.
Granting privileges on POF objects to SYS
Loading /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/upgus.ctl using sqlldr
Copying scripts to de-install message objects.
Get Portal version and determine upgrade sequence
Running upg/common/setup/upgetver.sqlPortal SQL script started at Wed Oct 18 21:22:22 2006
Connected.
Upgrading to version 10.1.4.0.0
Version directories to be traversed: upg/10140
Running upg/common/setup/setseq.pl Set the correct Traversal Sequence
### PHASE 4: Pre upgrade checks
Upgrade phase started at Wed Oct 18 21:22:22 2006
Processing Metadata File: upg/common/prechk/prechk.met Running upg/common/prechk/prechk.pl Set up subscriber iteration
Running upg/common/prechk/upgetsub.sqlPortal SQL script started at Wed Oct 18 21:22:22 2006
Connected.
### Perform pre upgrade checks
Step started at Wed Oct 18 21:22:22 2006
Running upg/frwk/utlchvpd.sqlPortal SQL script started at Wed Oct 18 21:22:22 2006
Connected.
Calling DoPreChecks()Starting precheck at Wed Oct 18 21:22:23 2006
Calling upg/common/prechk/sysuppre.sql
Connected.
Running upg/common/prechk/upgtabs.sqlPortal SQL script started at Wed Oct 18 21:22:23 2006
Connected.
### ERROR: WWU-00013: Tables with UPG_ prefix were found in the OracleAS Portal
### schema.
### Table Name
### UPG_PTL_OBJECTS$
### UPG_PTL_TABLES$
### UPG_WWV_DOCINFO
### CAUSE: The upgrade is terminated when UPG_ prefix tables are present in the
### OracleAS Portal schema.
### ACTION: Back up all tables with the UPG_ prefix, then delete them from the
### OracleAS Portal schema. The script
### /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/dropupg.sql can
### be used for this purpose.
### Check Failed at Wed Oct 18 21:22:23 2006 Continuing as PreCheck mode is specified
Calling upg/common/prechk/wwvcheck.sql
Portal SQL script started at Wed Oct 18 21:22:23 2006
Connected.
# Beginning outer script: prechk/wwvcheck
# Check for invalid Portlet Builder (webview) components.
# Checking if there are too many archive components.
# Checking for missing application schemas.
# Ending outer script: prechk/wwvcheck, 0.31 seconds
Ending precheck at Wed Oct 18 21:22:24 2006
Running upg/common/prechk/upchkobj.sqlPortal SQL script started at Wed Oct 18 21:22:24 2006
Connected.
Running upg/common/prechk/chkmrreg.sqlPortal SQL script started at Wed Oct 18 21:22:24 2006
Connected.
# Beginning outer script: prechk/chkmrreg
# Pre-check to determine that OracleAS Portal is registered with OracleAS Internet Directory
# OracleAS Portal has been wired with OracleAS Internet Directory
# Ending outer script: prechk/chkmrreg, 0.10 seconds
### Connect to OID as Application Entry
Running upg/common/prechk/bindapp.sql . Portal SQL script started at Wed Oct 18 21:22:24 2006
Connected.
# Beginning outer script: prechk/bindapp
#-- Beginning inner script: prechk/bindapp
# Pre-check to test bind to OracleAS Internet Directory Server
# Connecting to OracleAS Internet Directory as the Application Entry
# Connecting to OracleAS Internet Directory as the Application Entry was successful
#-- Ending inner script: prechk/bindapp, 0.14 seconds
# Ending outer script: prechk/bindapp, 0.20 seconds
### Display Tablespace and Parameter Settings
Running upg/common/prechk/../../frwk/upshoset.sql .
Subscriber independent Processing.
Portal SQL script started at Wed Oct 18 21:22:24 2006
Connected.
# Beginning outer script: prechk/upshoset
Tablespace Usage
TABLESPACE BYTES_USED BYTES_FREE TOTAL BYTES CREATE_BYTES AUT FILE STAT STATUS ENABLED BLOCKS BLOCK_SIZE FILE_NAME
B2B_DT 63766528 20054016 83886080 0 YES AVAILABLE ONLINE READ WRITE 10240 8192 /raid/product/oradata/IASDB/b2b_dt.dbf
B2B_IDX 14942208 26935296 41943040 0 YES AVAILABLE ONLINE READ WRITE 5120 8192 /raid/product/oradata/IASDB/b2b_idx.dbf
B2B_LOB 11141120 30736384 41943040 0 YES AVAILABLE ONLINE READ WRITE 5120 8192 /raid/product/oradata/IASDB/b2b_lob.dbf
B2B_RT 39780352 12582912 52428800 0 YES AVAILABLE ONLINE READ WRITE 6400 8192 /raid/product/oradata/IASDB/b2b_rt.dbf
BAM 6553600 3866624 10485760 0 YES AVAILABLE ONLINE READ WRITE 1280 8192 /raid/product/oradata/IASDB/bam.dbf
DCM 237174784 20709376 257949696 0 YES AVAILABLE ONLINE READ WRITE 31488 8192 /raid/product/oradata/IASDB/dcm.dbf
DISCO_PTM5 1310720 1769472 3145728 0 YES AVAILABLE ONLINE READ WRITE 384 8192 /raid/product/oradata/IASDB/discopltc1.dbf
_CACHE
DISCO_PTM5 1310720 1769472 3145728 0 YES AVAILABLE ONLINE READ WRITE 384 8192 /raid/product/oradata/IASDB/discopltm1.dbf
_META
DSGATEWAY_ 5701632 1572864 7340032 0 YES AVAILABLE ONLINE READ WRITE 896 8192 /raid/product/oradata/IASDB/oss_sys01.dbf
TAB
IAS_META 210567168 30539776 241172480 0 YES AVAILABLE ONLINE READ WRITE 29440 8192 /raid/product/oradata/IASDB/ias_meta01.dbf
OCATS 1769472 5505024 7340032 0 YES AVAILABLE ONLINE READ WRITE 896 8192 /raid/product/oradata/IASDB/oca.dbf
OLTS_ATTRS 2555904 917504 3538944 0 YES AVAILABLE ONLINE READ WRITE 432 8192 /raid/product/oradata/IASDB/attrs1_oid.dbf
TORE
OLTS_BATTR 262144 131072 516096 0 YES AVAILABLE ONLINE READ WRITE 63 8192 /raid/product/oradata/IASDB/battrs1_oid.dbf
STORE
OLTS_DEFAU 3997696 851968 4915200 0 YES AVAILABLE ONLINE READ WRITE 600 8192 /raid/product/oradata/IASDB/gdefault1_oid.dbf
LT
ORABPEL 11993088 29884416 41943040 0 YES AVAILABLE ONLINE READ WRITE 5120 8192 /raid/product/oradata/IASDB/orabpel.dbf
PORTAL 74383360 6946816 78643200 0 YES AVAILABLE ONLINE READ WRITE 9600 8192 /raid/product/oradata/IASDB/portal.dbf
PORTAL_DOC 851968 3276800 4194304 0 YES AVAILABLE ONLINE READ WRITE 512 8192 /raid/product/oradata/IASDB/ptldoc.dbf
PORTAL_IDX 11206656 41156608 52428800 0 YES AVAILABLE ONLINE READ WRITE 6400 8192 /raid/product/oradata/IASDB/ptlidx.dbf
PORTAL_LOG 262144 3866624 4194304 0 YES AVAILABLE ONLINE READ WRITE 512 8192 /raid/product/oradata/IASDB/ptllog.dbf
SYSAUX 235732992 5373952 241172480 0 YES AVAILABLE ONLINE READ WRITE 29440 8192 /raid/product/oradata/IASDB/sysaux01.dbf
SYSTEM 834404352 4390912 838860800 0 YES AVAILABLE SYSTEM READ WRITE 102400 8192 /raid/product/oradata/IASDB/system01.dbf
TEMP 6291456 18874368 25165824 25165824 YES AVAILABLE ONLINE READ WRITE 3072 8192 /raid/product/oradata/IASDB/temp01.dbf
UDDISYS_TS 19988480 28180480 48234496 0 YES AVAILABLE ONLINE READ WRITE 5888 8192 /raid/product/oradata/IASDB/uddisys01.dbf
UNDOTBS1 247201792 4390912 251658240 0 YES AVAILABLE ONLINE READ WRITE 30720 8192 /raid/product/oradata/IASDB/undotbs01.dbf
USERS 327680 4849664 5242880 0 YES AVAILABLE ONLINE READ WRITE 640 8192 /raid/product/oradata/IASDB/users01.dbf
WCRSYS_TS 1703936 15007744 16777216 0 YES AVAILABLE ONLINE READ WRITE 2048 8192 /raid/product/oradata/IASDB/wcrsys01.dbf
Sort Segment Data
TABLESPACE EXTENT_SIZE TOTAL_EXTENTS USED_EXTENTS FREE_EXTENTS MAX_USED_SIZE
TEMP 128 5 0 5 1
SGA Allocation Stats
POOL NAME BYTES
java pool free memory 67108864
Total 67108864
SGA Allocation Stats
POOL NAME BYTES
large pool free memory 8388608
Total 8388608
SGA Allocation Stats
POOL NAME BYTES
shared pool fixed allocation callback 344
shared pool pl/sql source 1156
shared pool table definiti 1712
shared pool alert threshol 2648
shared pool trigger inform 3048
shared pool joxs heap 4220
shared pool policy hash ta 4220
shared pool trigger defini 5980
shared pool KQR S SO 7176
shared pool PLS non-lib hp 12208
shared pool trigger source 18652
shared pool KQR L SO 44032
shared pool repository 76264
shared pool KQR M SO 81408
shared pool parameters 105696
shared pool type object de 194164
shared pool KQR S PO 207136
shared pool VIRTUAL CIRCUITS 649340
shared pool FileOpenBlock 746704
shared pool kmgsb circular statistics 821248
shared pool KSXR pending messages que 841036
shared pool KSXR receive buffers 1032500
shared pool KQR M PO 1675892
shared pool sessions 1835204
shared pool PL/SQL DIANA 2910560
shared pool private strands 2928640
shared pool KTI-UNDO 3019632
shared pool KGLS heap 3105320
shared pool PL/SQL MPCODE 3705484
shared pool row cache 3707272
shared pool ASH buffers 4194304
shared pool event statistics per sess 9094400
shared pool sql area 9234624
shared pool library cache 10361688
shared pool miscellaneous 15820288
shared pool free memory 74540744
Total 150994944
SGA Allocation Stats
POOL NAME BYTES
log_buffer 524288
fixed_sga 778968
buffer_cache 50331648
Total 51634904
Database Parameters
NAME VALUE
O7_DICTIONARY_ACCESSIBILITY FALSE
active_instance_count
aq_tm_processes 1
archive_lag_target 0
asm_diskgroups
asm_diskstring
asm_power_limit 1
audit_file_dest /raid/product/OraHome_1/rdbms/audit
audit_sys_operations FALSE
audit_trail NONE
background_core_dump partial
background_dump_dest /raid/product/admin/IASDB/bdump
backup_tape_io_slaves FALSE
bitmap_merge_area_size 1048576
blank_trimming FALSE
buffer_pool_keep
buffer_pool_recycle
circuits
cluster_database FALSE
cluster_database_instances 1
cluster_interconnects
commit_point_strength 1
compatible 10.1.0.2.0
control_file_record_keep_time 7
control_files /raid/product/oradata/IASDB/control01.ctl, /raid/product/oradata/IASDB/control02
.ctl, /raid/product/oradata/IASDB/control03.ctl
core_dump_dest /raid/product/admin/IASDB/cdump
cpu_count 2
create_bitmap_area_size 8388608
create_stored_outlines
cursor_sharing EXACT
cursor_space_for_time FALSE
db_16k_cache_size 0
db_2k_cache_size 0
db_32k_cache_size 0
db_4k_cache_size 0
db_8k_cache_size 0
db_block_buffers 0
db_block_checking FALSE
db_block_checksum TRUE
db_block_size 8192
db_cache_advice ON
db_cache_size 50331648
db_create_file_dest
db_create_online_log_dest_1
db_create_online_log_dest_2
db_create_online_log_dest_3
db_create_online_log_dest_4
db_create_online_log_dest_5
db_domain bizmatch.com.cn
db_file_multiblock_read_count 16
db_file_name_convert
db_files 200
db_flashback_retention_target 1440
db_keep_cache_size 0
db_name IASDB
db_recovery_file_dest /raid/product/flash_recovery_area
db_recovery_file_dest_size 2147483648
db_recycle_cache_size 0
db_unique_name IASDB
db_writer_processes 1
dbwr_io_slaves 0
ddl_wait_for_locks FALSE
dg_broker_config_file1 /raid/product/OraHome_1/dbs/dr1IASDB.dat
dg_broker_config_file2 /raid/product/OraHome_1/dbs/dr2IASDB.dat
dg_broker_start FALSE
disk_asynch_io TRUE
dispatchers (PROTOCOL=TCP)(PRE=oracle.aurora.server.GiopServer), (PROTOCOL=TCP)(PRE=oracle.a
urora.server.SGiopServer)
distributed_lock_timeout 60
dml_locks 1760
drs_start FALSE
enqueue_resources 1980
event
fal_client
fal_server
fast_start_io_target 0
fast_start_mttr_target 0
fast_start_parallel_rollback LOW
file_mapping FALSE
fileio_network_adapters
filesystemio_options none
fixed_date
gc_files_to_locks
gcs_server_processes 0
global_context_pool_size
global_names FALSE
hash_area_size 131072
hi_shared_memory_address 0
hs_autoregister TRUE
ifile
instance_groups
instance_name IASDB
instance_number 0
instance_type RDBMS
java_max_sessionspace_size 0
java_pool_size 67108864
java_soft_sessionspace_limit 0
job_queue_processes 5
large_pool_size 8388608
ldap_directory_access NONE
license_max_sessions 0
license_max_users 0
license_sessions_warning 0
local_listener
lock_name_space
lock_sga FALSE
log_archive_config
log_archive_dest
log_archive_dest_1
log_archive_dest_10
log_archive_dest_2
log_archive_dest_3
log_archive_dest_4
log_archive_dest_5
log_archive_dest_6
log_archive_dest_7
log_archive_dest_8
log_archive_dest_9
log_archive_dest_state_1 enable
log_archive_dest_state_10 enable
log_archive_dest_state_2 enable
log_archive_dest_state_3 enable
log_archive_dest_state_4 enable
log_archive_dest_state_5 enable
log_archive_dest_state_6 enable
log_archive_dest_state_7 enable
log_archive_dest_state_8 enable
log_archive_dest_state_9 enable
log_archive_duplex_dest
log_archive_format %t_%s_%r.dbf
log_archive_local_first TRUE
log_archive_max_processes 2
log_archive_min_succeed_dest 1
log_archive_start FALSE
log_archive_trace 0
log_buffer 524288
log_checkpoint_interval 0
log_checkpoint_timeout 1800
log_checkpoints_to_alert FALSE
log_file_name_convert
logmnr_max_persistent_sessions 1
max_commit_propagation_delay 0
max_dispatchers
max_dump_file_size UNLIMITED
max_enabled_roles 150
max_shared_servers
nls_calendar
nls_comp
nls_currency
nls_date_format
nls_date_language
nls_dual_currency
nls_iso_currency
nls_language AMERICAN
nls_length_semantics BYTE
nls_nchar_conv_excp FALSE
nls_numeric_characters
nls_sort
nls_territory AMERICA
nls_time_format
nls_time_tz_format
nls_timestamp_format
nls_timestamp_tz_format
object_cache_max_size_percent 10
object_cache_optimal_size 102400
olap_page_pool_size 0
open_cursors 300
open_links 4
open_links_per_instance 4
optimizer_dynamic_sampling 2
optimizer_features_enable 10.1.0.5
optimizer_index_caching 0
optimizer_index_cost_adj 100
optimizer_mode ALL_ROWS
os_authent_prefix ops$
os_roles FALSE
parallel_adaptive_multi_user TRUE
parallel_automatic_tuning FALSE
parallel_execution_message_size 2148
parallel_instance_group
parallel_max_servers 40
parallel_min_percent 0
parallel_min_servers 0
parallel_server FALSE
parallel_server_instances 1
parallel_threads_per_cpu 2
pga_aggregate_target 33554432
plsql_code_type INTERPRETED
plsql_compiler_flags INTERPRETED, NON_DEBUG
plsql_debug FALSE
plsql_native_library_dir
plsql_native_library_subdir_count 0
plsql_optimize_level 2
plsql_v2_compatibility FALSE
plsql_warnings DISABLE:ALL
pre_page_sga FALSE
processes 150
query_rewrite_enabled TRUE
query_rewrite_integrity enforced
rdbms_server_dn
read_only_open_delayed FALSE
recovery_parallelism 0
remote_archive_enable true
remote_dependencies_mode TIMESTAMP
remote_listener
remote_login_passwordfile EXCLUSIVE
remote_os_authent FALSE
remote_os_roles FALSE
replication_dependency_tracking TRUE
resource_limit FALSE
resource_manager_plan
resumable_timeout 0
rollback_segments
serial_reuse disable
service_names IASDB.bizmatch.com.cn
session_cached_cursors 0
session_max_open_files 10
sessions 400
sga_max_size 281018368
sga_target 0
shadow_core_dump partial
shared_memory_address 0
shared_pool_reserved_size 7549747
shared_pool_size 150994944
shared_server_sessions
shared_servers 1
skip_unusable_indexes TRUE
smtp_out_server
sort_area_retained_size 0
sort_area_size 65536
sp_name IASDB
spfile /raid/product/OraHome_1/dbs/spfileIASDB.ora
sql92_security FALSE
sql_trace FALSE
sql_version NATIVE
sqltune_category DEFAULT
standby_archive_dest ?/dbs/arch
standby_file_management MANUAL
star_transformation_enabled FALSE
statistics_level TYPICAL
streams_pool_size 0
tape_asynch_io TRUE
thread 0
timed_os_statistics 0
timed_statistics TRUE
trace_enabled TRUE
tracefile_identifier
transactions 440
transactions_per_rollback_segment 5
undo_management AUTO
undo_retention 900
undo_tablespace UNDOTBS1
use_indirect_data_buffers FALSE
user_dump_dest /raid/product/admin/IASDB/udump
utl_file_dir
workarea_size_policy AUTO
All Portal DBMS jobs
JOB LOG_USER PRIV_USER SCHEMA_USER
17 PORTAL PORTAL PORTAL
18 PORTAL PORTAL PORTAL
27 PORTAL PORTAL PORTAL
28 PORTAL PORTAL PORTAL
43 PORTAL PORTAL PORTAL
Details of all Portal DBMS jobs
JOB WHAT
17 begin execute immediate 'begin wwctx_sso.cleanup_sessions(
p_hours_old => 168 ); end;' ; exception when others then
null; end;
18 wwsec_api_private.rename_users;
27 wwv_context.sync;
28 wwv_context.optimize(CTX_DDL.OPTLEVEL_FULL,1440,null);
43 begin execute immediate 'begin wwutl_cache_sys.process_background_inv
al; end;' ; exception when others then wwlog_api.log(p_
domain=>'utl', p_subdomain=>'cache', p_name=>'background
', p_action=>'process_background_inval', p_information =
> 'Error in process_background_inval '|| sqlerrm);end;
Database version details
BANNER
Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Prod
PL/SQL Release 10.1.0.4.2 - Production
CORE 10.1.0.4.0 Production
TNS for Linux: Version 10.1.0.4.0 - Production
NLSRTL Version 10.1.0.4.2 - Production
# Ending outer script: prechk/upshoset, 1.83 seconds
### Log invalid DB objects in the temporary directory.
List count of invalid objects in the database in /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/dbinvob1.log
Running upg/frwk/dbinvobj.sqlPortal SQL script started at Wed Oct 18 21:22:26 2006
Connected.
### Install Schema Validation Utility
Running upg/common/prechk/svuver.sql . Portal SQL script started at Wed Oct 18 21:22:26 2006
Connected.
# Beginning outer script: prechk/svuver
#-- Beginning inner script: prechk/svuver
# Portal Schema Version = 10.1.2.0.2
# Version of schema validation utility being installed = 101202
# Load the Schema Validation Utility
Installed version of schema validation utility: 10.1.2.0.6
Schema Validation Utility version: 10.1.2.0.6 will be installed.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWUTL_SCHEMA_COMMON:
44/9 PL/SQL: Statement ignored
44/16 PLS-00905: object PORTAL.WWSBR_SITE_DB is invalid
70/9 PL/SQL: Statement ignored
70/17 PLS-00905: object PORTAL.WWPOB_API_PAGE is invalid
96/10 PL/SQL: Statement ignored
96/18 PLS-00905: object PORTAL.WWV_THINGDB is invalid
122/10 PL/SQL: Statement ignored
122/18 PLS-00905: object PORTAL.WWV_THINGDB is invalid
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWUTL_ATTR_VALIDATION:
740/9 PL/SQL: SQL Statement ignored
778/26 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWUTL_PAGE_GROUP_VALIDATION:
366/9 PL/SQL: SQL Statement ignored
372/31 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
1447/13 PL/SQL: SQL Statement ignored
1458/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
1624/13 PL/SQL: SQL Statement ignored
1635/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
1783/13 PL/SQL: SQL Statement ignored
1794/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
1896/13 PL/SQL: SQL Statement ignored
1907/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
2009/13 PL/SQL: SQL Statement ignored
2020/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
2126/13 PL/SQL: SQL Statement ignored
2137/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
No errors.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWUTL_PAGE_VALIDATION:
137/9 PL/SQL: SQL Statement ignored
144/53 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
258/21 PL/SQL: SQL Statement ignored
260/43 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
277/17 PL/SQL: SQL Statement ignored
279/39 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
322/9 PL/SQL: SQL Statement ignored
327/25 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
353/25 PL/SQL: Statement ignored
353/40 PLS-00905: object PORTAL.WWPOB_API_PAGE is invalid
362/29 PL/SQL: SQL Statement ignored
369/42 PL/SQL: ORA-06575: Package or function WWPOB_API_PAGE is in an
invalid state
376/33 PL/SQL: Statement ignored
376/48 PLS-00905: object PORTAL.WWPOB_API_PAGE is invalid
385/21 PL/SQL: SQL Statement ignored
388/39 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
1214/21 PL/SQL: SQL Statement ignored
1216/42 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
1262/9 PL/SQL: SQL Statement ignored
1266/30 PL/SQL: ORA-06575: Package or function WWPOB_API_PAGE is in an
invalid state
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWUTL_REGION_VALIDATION:
237/9 PL/SQL: SQL Statement ignored
249/41 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWUTL_STYLE_VALIDATION:
414/9 PL/SQL: SQL Statement ignored
424/44 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
584/21 PL/SQL: Statement ignored
584/52 PLS-00905: object PORTAL.WWSBR_SITE_DB is invalid
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWUTL_THING_VALIDATION:
2129/32 PL/SQL: Item ignored
2130/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
2131/32 PL/SQL: Item ignored
2132/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
2133/32 PL/SQL: Item ignored
2134/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
2135/31 PL/SQL: Item ignored
2136/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
2137/31 PL/SQL: Item ignored
2138/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
2139/31 PL/SQL: Item ignored
2140/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
2151/32 PL/SQL: Item ignored
2151/42 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
2152/32 PL/SQL: Item ignored
2152/42 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
2153/32 PL/SQL: Item ignored
2153/42 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
2202/17 PL/SQL: SQL Statement ignored
2212/27 PL/SQL: ORA-06575: Package or function WWSBR_THING_TYPES is in an
invalid state
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWUTL_ITEM_VALIDATION:
322/9 PL/SQL: SQL Statement ignored
338/30 PL/SQL: ORA-06575: Package or function WWPOB_API_PAGE is in an
invalid state
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWUTL_PORTLET_VALIDATION:
155/13 PL/SQL: SQL Statement ignored
163/36 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
170/13 PL/SQL: SQL Statement ignored
178/36 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
invalid state
459/9 PL/SQL: SQL Statement ignored
467/31 PL/SQL: ORA-06575: Package or function WWSBR_SITEBUILDER_PROVIDER
is in an invalid state
581/9 PL/SQL: SQL Statement ignored
584/21 PL/SQL: ORA-06575: Package or function WWSBR_SITEBUILDER_PROVIDER
is in an invalid state
588/9 PL/SQL: SQL Statement ignored
591/29 PL/SQL: ORA-06575: Package or function WWSBR_SITEBUILDER_PROVIDER
is in an invalid state
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWUTL_DBPROV_VALIDATION:
341/25 PL/SQL: Item ignored
341/45 PLS-00302: component 'URL' must be declared
559/17 PL/SQL: Statement ignored
559/17 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
562/17 PL/SQL: Statement ignored
564/40 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
No errors.
No errors.
### Invoke Schema Validation Utility in Report Mode
Running upg/common/prechk/../../frwk/svurun.sql . Portal SQL script started at Wed Oct 18 21:22:31 2006
Connected.
# Beginning outer script: prechk/svurun
#-- Beginning inner script: frwk/svurun
declare
ERROR at line 1:
ORA-20000:
ORA-06512: at "PORTAL.WWPOF", line 440
ORA-06512: at line 45
ORA-20000:
ORA-06512: at "PORTAL.WWPOF", line 440
ORA-06512: at "PORTAL.WWUTL_SCHEMA_VALIDATION", line 263
ORA-04063: package body "PORTAL.WWUTL_PAGE_GROUP_VALIDATION" has errors
ORA-06508: PL/SQL: could not find program unit being called
Connected.
# Run the report mode of the schema validation utility
#---- Beginning inner script: wwutl_schema_validation.validate_all
# Running the validation in report mode
# Schema Validation Utility Version = 10.1.2.0.6
# Validate Page Groups
# Handling exception
# ERROR: When executing schema validation utility
# ERROR: ORA-06508: PL/SQL: could not find program unit being called
# ----- PL/SQL Call Stack -----
object line object
handle number name
0x5c4fef28 434 package body PORTAL.WWPOF
0x5bb96e20 263 package body PORTAL.WWUTL_SCHEMA_VALIDATION
0x5bb96e20 297 package body PORTAL.WWUTL_SCHEMA_VALIDATION
0x5b885fe4 18 anonymous block
# Handling exception
# ERROR: When running the schema validation utility
# ERROR: ORA-20000:
ORA-06512: at "PORTAL.WWPOF", line 440
ORA-06512: at "PORTAL.WWUTL_SCHEMA_VALIDATION", line 263
ORA-04063: package body "PORTAL.WWUTL_PAGE_GROUP_VALIDATION" has errors
ORA-06508: PL/SQL: could not find program unit being called
# ----- PL/SQL Call Stack -----
object line object
handle number name
0x5c4fef28 434 package body PORTAL.WWPOF
0x5b885fe4 45 anonymous block
### ERROR: Exception Executing upg/common/prechk/../../frwk/svurun.sql REPORT PRECHK for Subscriber: 1
### Check Failed at Wed Oct 18 21:22:31 2006 Continuing as PreCheck mode is specified
### PHASE 5: Version specific user inputs
Upgrade phase started at Wed Oct 18 21:22:31 2006
Processing Metadata File: upg/10140/inputchk/inputchk.met ###
### PHASE 6: Version specific pre upgrade checks
Upgrade phase started at Wed Oct 18 21:22:31 2006
Processing Metadata File: upg/10140/prechk/prechk.met ###
### PHASE 7: Pre upgrade common information gathering
Upgrade phase started at Wed Oct 18 21:22:31 2006
Processing Metadata File: upg/common/info/info.met ### Log portal configuration info in the temporary directory.
Running upg/common/info/ptlinfo.sql . Portal SQL script started at Wed Oct 18 21:22:31 2006
Connected.
# Beginning outer script: info/ptlinfo
# Ending outer script: info/ptlinfo, 0.13 seconds
Metadata File upg/10140/info/info.met does not exist.
### PHASE 8: Verify user inputs
Upgrade phase started at Wed Oct 18 21:22:32 2006
Processing Metadata File: upg/common/verfyinp/verfyinp.met Running upg/common/verfyinp/verfyinp.pl The following details have been determined:
General Details
===========================================================
Log File Name : /raid/product/OraHome_1/upgrade/temp/portal/precheck.log
RDBMS Version : 10.1.0
Product Version : 10.1.2.0.2
Oracle PL/SQL Toolkit Schema : SYS
Oracle PL/SQL Toolkit version : 10.1.2.0.2
O7 accessibility : FALSE
Schema Details
===========================================================
Name : portal
Connect String : (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=portaldb.bizmatch.com.cn)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=IASDB.bizmatch.com.cn)))
Tablespace Details
===========================================================
Default Tablespace : PORTAL
Temporary Tablespace : TEMP
Document Tablespace : PORTAL_DOC
Logging Tablespace : PORTAL_LOG
Index Tablespace : PORTAL
### ERROR: WWU-00030: Pre-Check mode encountered the following errors:
### 184 : ### ERROR: WWU-00013: Tables with UPG_ prefix were found in the OracleAS Portal
### 706 : 44/16 PLS-00905: object PORTAL.WWSBR_SITE_DB is invalid
### 708 : 70/17 PLS-00905: object PORTAL.WWPOB_API_PAGE is invalid
### 710 : 96/18 PLS-00905: object PORTAL.WWV_THINGDB is invalid
### 712 : 122/18 PLS-00905: object PORTAL.WWV_THINGDB is invalid
### 719 : 778/26 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 727 : 372/31 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 731 : 1458/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 735 : 1635/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 739 : 1794/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 743 : 1907/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 747 : 2020/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 751 : 2137/28 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 761 : 144/53 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 765 : 260/43 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 769 : 279/39 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 773 : 327/25 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 777 : 353/40 PLS-00905: object PORTAL.WWPOB_API_PAGE is invalid
### 779 : 369/42 PL/SQL: ORA-06575: Package or function WWPOB_API_PAGE is in an
### 783 : 376/48 PLS-00905: object PORTAL.WWPOB_API_PAGE is invalid
### 785 : 388/39 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 789 : 1216/42 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 793 : 1266/30 PL/SQL: ORA-06575: Package or function WWPOB_API_PAGE is in an
### 801 : 249/41 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 809 : 424/44 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 813 : 584/52 PLS-00905: object PORTAL.WWSBR_SITE_DB is invalid
### 819 : 2130/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
### 821 : 2132/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
### 823 : 2134/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
### 825 : 2136/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
### 827 : 2138/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
### 829 : 2140/13 PLS-00905: object PORTAL.WWSBR_THING_TYPES is invalid
### 831 : 2151/42 PLS-00320: the declaration of the type of this expression is
### 835 : 2152/42 PLS-00320: the declaration of the type of this expression is
### 839 : 2153/42 PLS-00320: the declaration of the type of this expression is
### 843 : 2212/27 PL/SQL: ORA-06575: Package or function WWSBR_THING_TYPES is in an
### 851 : 338/30 PL/SQL: ORA-06575: Package or function WWPOB_API_PAGE is in an
### 859 : 163/36 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 863 : 178/36 PL/SQL: ORA-06575: Package or function WWSBR_SITE_DB is in an
### 867 : 467/31 PL/SQL: ORA-06575: Package or function WWSBR_SITEBUILDER_PROVIDER
### 871 : 584/21 PL/SQL: ORA-06575: Package or function WWSBR_SITEBUILDER_PROVIDER
### 875 : 591/29 PL/SQL: ORA-06575: Package or function WWSBR_SITEBUILDER_PROVIDER
### 883 : 341/45 PLS-00302: component 'URL' must be declared
### 885 : 559/17 PLS-00320: the declaration of the type of this expression is
### 889 : 564/40 PLS-00320: the declaration of the type of this expression is
### 904 : ERROR at line 1:
### 905 : ORA-20000:
### 906 : ORA-06512: at "PORTAL.WWPOF", line 440
### 907 : ORA-06512: at line 45
### 908 : ORA-20000:
### 909 : ORA-06512: at "PORTAL.WWPOF", line 440
### 910 : ORA-06512: at "PORTAL.WWUTL_SCHEMA_VALIDATION", line 263
### 911 : ORA-04063: package body "PORTAL.WWUTL_PAGE_GROUP_VALIDATION" has errors
### 912 : ORA-06508: PL/SQL: could not find program unit being called
### 922 : # ERROR: When executing schema validation utility
### 923 : # ERROR: ORA-06508: PL/SQL: could not find program unit being called
### 933 : # ERROR: When running the schema validation utility
### 934 : # ERROR: ORA-20000:
### 935 : ORA-06512: at "PORTAL.WWPOF", line 440
### 936 : ORA-06512: at "PORTAL.WWUTL_SCHEMA_VALIDATION", line 263
### 937 : ORA-04063: package body "PORTAL.WWUTL_PAGE_GROUP_VALIDATION" has errors
### 938 : ORA-06508: PL/SQL: could not find program unit being called
### 947 : ### ERROR: Exception Executing upg/common/prechk/../../frwk/svurun.sql REPORT PRECHK for Subscriber: 1
### Check Failed at Wed Oct 18 21:22:32 2006 Continuing as PreCheck mode is specified
Pre-Check Completed at Wed Oct 18 21:22:32 2006Hi,
Its good that u pasted the complete log file. In your environment you have to run this upgrade tool only once from any of the middle tier.
And with respect to your error that u got in precheck is quite simple. All u have to do is just run this script from by connecting to portal schema using sqlplus.
Run dropupg.sql
Location-------- /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/dropupg.sql
Later you re-run the upgrade tool and let me know the status.
Good luck
Tanmai -
Hi All,
I have 10 years of data for Order Management that was loaded as Full. I am running nightly incremental loads.
I needed to replace the fiscal month calendar with the one client is using, i.e July is first month and June is month 12.
I placed the fiscal_month.csv file that client provided.
Since the year extends beyond 2010, I made the refresh date for the date dimensions NULL.
I changed the $$END_DATE parameter for SIL_DayDimension task to 2020 and pushed it to references.
The ETL fails to truncate W_DAY_D after the changes and I get unique constraint errors. Any reason why? Thanks for your responsesWell if you check the DAC tasks, then you'll see that only the SIL_DayDimension_UpdateFlag runs for incremental loads.
If you want to reload the W_DAY_D, then you need to reset the refresh date of the TARGET tables which then in turn will propagate to W_DAY_D. I.e.: The target tables for tasks starting with SIL_DayDimension*.
Alternatively (and that's what I do normally), create a Subject Area explicitely for W_DAY_D and its staging tables. This way you can run a reload of that table as often as you want through its own execution plan.
HTH.
Chris -
Hello i am wondering if i can get a faster upload speed?? faster then 5 Meg up ?? i really need it for video confranceing !!!i will pay a bit more.
Are you currently on Max Turbo or Power?
You can check your eligiblity for higher tiers by going into your MyAT&T account.
Go here -
https://www.att.com/olam/passthroughAction.myworld?actionType=Manage
Once logged in, hover over the "Internet" tab. As one of the options, you should see "Change Plan." Click on that and see if there's a higher plan available.
You may also call AT&T at 800.288.2020 and contact the sales department to discuss upgrading your plan.
-
SCE vlan translation with connection-mode inline on-failure bypass
Hi guys,
Can anyone tell me the behaviour of the SCE (1010 or 2020) in a failure scenario when configured with the following commands?
connection-mode inline on-failure bypass
VLAN translation increment value 5
While the SCE is in failure mode, will the VLAN increment between the SUB and NET ports still be applied (ie. applied in hardware while the control engine is being bypassed), or will all frames be passed from the SUB to the NET ports unaltered?
Regards,
Brett.Reading through the CLI :
int LineCard 0
connection-mode inline on-failure bypass
VLAN translation ?
decrement Vlan will be decremented on network port and incremented on subscriber port
increment Vlan will be incremented on network port and decremented on subscriber port
So on traffic that is either coming in on either the network side or sub side will get either incremeneted or decremented for vlan translation.
Is there a need to do this ? what scenario are you considering using it in ? if the traffic is bypassed as is shown why you need to further massage it ? -
Posting period 005 2020 is not open when perfomr /dbm/cashdesk cancellation
Hi Expert,
Currently our SAP DBM on patch7 & SP04 (latest), now i would like to cancel cash document in /dbm/cashdesk and system come out with error as below:
Posting period 005 2020 is not open
Message no. F5201
Diagnosis
Period 005 of fiscal year 2020 is not open for posting for the variant of posting period 5000.
System Response
Processing cannot be continued.
Procedure
The error can have several causes. In order to eliminate the error, proceed as follows:
1. Check whether the posting date was entered correctly. The system determines the posting period by means of the date.
2. Check whether the required posting period is open for posting for the variant of posting period 5000 and account type +. Make sure that the period is open for posting.
To do this, specify a period interval in which the required period for the variant of posting period 5000 and account type + is contained.
You make these settings in Customizing of Financial Accounting (New) under Financial Accounting Global Settings (New) -> Ledgers -> Fiscal Year and Posting Periods - > Posting Periods -> Open and Close Posting Periods.
I able to post cashdesk document in customer incoming payment tab and i cannot cancel due to posting period 05 & year 2020 not open.
Currently we are in 05 2011 not 2020, is any expert can advice where to set cashdesk fiscal year configure?
I need to open FI period until 05 2020, then my cash document cancellation is successful.
Thanks
regards,
ng chong chuanHi,
First check the Current period in OMSY trx...for your Comp code..
Then go to MMPV and enter Comp code, Period & Year
and execute...
Ex: if the current period in OMSY for your Comp code is 01,2008
then you need to enter period 02, 2008 in MMPV trx...
so, that period 01 will be closed & Period 02 will be opened automatically...
You need to close periods one by one like this..
until the period you want use...
Remember you can not Roll back the closed period
Be careful in closing the MM period in PRD client.
Thx
Raju -
Performance blocker on cFP-2020: file-I/O! How to improve?
Hi all,
after resolving my serial-communication problems I still have a performance problem. The code is way too slow which causes e.g. the ftp-server on the fieldpoint to not respond anymore to requests from my PC. I always get timeouts. I also frequently get loop-finished-late events within my two state-machines. I have now used the timing and performance monitor to sse which vi is taking so much time. The result: A file-I/O vi that writes data and log-entries into three different log-files. With a former verion I simply used one vi that appends a string to an existing file. However, since this function disappeared with LV8.2 I had to rewrite the code to use the following sequence of LV-functions:
- file open
- set pointer to the end
- write string
- file close
My vi shich calls this sequence is horribly slow - execution time per run is about 200ms and the top of the list in the performance monitor. Are there any suggestions on how to improve this code? I simply want to add a string to the end of the log-file......
The vi is attached. There are two features in the code which are not self-explanatory: The first sub-vi generates a new file if is used for longer than a preset time (15 minutes in my case). So the create-time of the file is stored in the filename and whenever the current time exceeds create-time plus 15 min. A new file name is created. For simplicity, the name is stored only for the first of the three log-files. The other two are created by string operations from the first filename. Second, whenever a file is "created", that means is does not exist yet, a data-header is written to the file, before data is appended.
Can you see simple improvements here that will accelerate this code? Maybe open the file only once and then append data subsequently and only close it when a new file is created? But I do not need all three files all the times, there may be situations where only one file is needed, and the others need not be created at all.
Thanks,
Olaf
Attachments:
makedatalogfiles.vi 42 KBRavens Fan wrote:
I think moving the open file, move to end of file, and close file out of the loop would certainly help. These functions could be associated with or built into your "determine new file" VI. Since the file paths get passed into the loops, you could pass them through with shift registers so that you can close them after the loops end.
One other thing to look at is your initialize array and insert into array functions. I believe insert into array is one of the costlier functions. Build array would be better. And initializing a much larger array and using replace array subset is better yet. But if you wind up with more elements than you had originally initialized for, you will have to use build array to enlarge it. I would recommend searching the Labview forum for insert into array, build array, and replace array subset for threads that do a better job explaining the differences and advantages of each.
Thanks, that improved the performance of this vi by about two orders of magnitude. The application is now much more stable.
However, I cannot connect to the cFP-2020 anymore by ftp. I even swithed the fieldpoint to boot without vi.
To be specific, I can access the cFP and cd into all directories except for the directory with the data. I assume that there is a large
amount of files in it now, but used to work before even with lots of files. The only thing that might be not so nice is that there is a space
in the folder name, but that has been like that for years now and used to work.
Is there any reason (corrupted file or something like that) that can cause the ftp to fail on this specific directory?
Thanks,
Olaf
...at least I am very close now to a satisfying and running system.... :-) -
Previously I could view my appointments/reminders in my calendar. This feature is no longer available. I know I have a reminder in the year 2020. Where can I view my appointments/reminders?
Reminders is a separate app from Calendars.
Appointments are in Calendar and remonders are in Reminder.
Maybe you are looking for
-
Deploying a jdev adf app on standalone weblogic issues
Dear all, Sorry for my post which is very long but i will try to give you all information. I am currently developing a full stack ADF application (with BC4J to access the database) using Jdev 11g last release (5407) When working in JDev, my applicati
-
How to make a circle from image?
hello, I have an image I created that is sort of straight, but I want to turn it into a circle, so I can make a frame. What's the best way to accomplish that? My image is sort of like this: Thank you!
-
Vendor International Name in DME file
Hello All, I am configuring DME payment file for Taiwanese client who use chinese charecters. Requirement- They need the vendor name to be displayed in chinese language (maintained in international Version in master data) and rest all other payment d
-
lost i-tunes library after downloading and installing latest version of i-tunes and quick-time. how does one go about restoring music library without reloading complete 16gb of data?
-
HT201303 No me acepta mi tarjeta, me pide el codigo de seguridad de la tarjeta
Quiero comprar una aplicacion y no se puede porque rayos si pongo los datos que necesitan Cuando introdusco el numero que corresponde a mi tarjeta me dice que no se puede que esta rechazada porque lo intente desde mi iphone y antes hise las compras d