Schannel errors on three of my DC's; Event ID 36887, Alert 46

I too am recieving the elusive schannel errors on three of my DC's, Event ID 36887, Alert 46. They only happen occasionally, at seemingly arbitrary times.
All three are Domain Controllers only; no IIS installed, no Exchange servers. No one logs in to these and browses from them (yes, I checked the event logs). There are no third party browsers installed. I have even tried disabling TLS
in the IE settings, no luck (not sure how or wy that would even work).
I have read as many forum posts as I can on this, and am still no closer to understanding what is going on.
How do I track this down?
EventID : 36887
MachineName : DCXY.Domain.us
Data : {}
Index : 27206
Category : (0)
CategoryNumber : 0
EntryType : Error
Message : The following fatal alert was received: 46.
Source : Schannel
ReplacementStrings : {46}
InstanceId : 36887
TimeGenerated : 3/26/2012 7:21:36 AM
TimeWritten : 3/26/2012 7:21:36 AM
UserName : NT AUTHORITY\SYSTEM
Thanks!

I REALLY NEED HELP! I AM NEW TO THIS LAPTOP, AND I DO NOT UNDERSTAND THIS IN MY EVENT VIEWER, IT SHOWS FATAL ERROR:
Provider
Name]
Schannel
Guid]
{1F678132-5938-4686-9FDC-C8FF68F15C85}
EventID
36887
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
SystemTime]
2014-01-12T21:23:37.220815100Z
EventRecordID
5190
Correlation
Execution
ProcessID]
660
ThreadID]
6336
Channel
System
Computer
5CD3182MR2
Security
UserID]
S-1-5-18
EventData
AlertDesc
40
I REALLY NEED HELP WITH THIS I AM ON A NEW LAPTOP AND DONT UNDERSTAND!! PLEASE ADVISE OR HELP!!

Similar Messages

  • Schannel errors on our Primary DC's; Event ID 36887, Alert 46

    I have one of my 4 Domain Controllers that is getting this EventID 36887 error every 60 seconds since our DC cert auto-renewed itself.  The internal CA is running on an non-DC server.  How do I determine what's triggering this alert so that I can
    squash it?  This alert is from the System Event logs on our Primary 2008 R2 DC (ORLDC01.cnlgroup.com).
    Log Name:      System
    Source:        Schannel
    Date:          1/13/2014 5:06:56 PM
    Event ID:      36887
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      ORLDC01.cnlgroup.com
    Description:
    The following fatal alert was received: 46.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
        <EventID>36887</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2014-01-13T22:06:56.581253200Z" />
        <EventRecordID>493191</EventRecordID>
        <Correlation />
        <Execution ProcessID="552" ThreadID="1848" />
        <Channel>System</Channel>
        <Computer>ORLDC01.cnlgroup.com</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="AlertDesc">46</Data>
      </EventData>
    </Event>

    Hi,
    Based on my research, the error code which means certificate_unknown(46), to find out what triggered this alert. I think you need capture a network trace while getting this error. More information please refer below article:
    How to use Network Monitor to capture network traffic
    http://blogs.msdn.com/b/ssasfaq/archive/2012/09/17/how-to-use-network-monitor-to-capture-network-traffic.aspx
    If there have no impact related this error, we can safely ignore this error. Otherwise, to address this error we might need capture ETL trace and networks trace. It is not an efficient way to work in this community since we may need more resources, if need
    further troubleshooting I would like to suggest you submit a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
    Please visit the below link to see the various paid support options that are available to better meet your needs.
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    Thanks

  • Schannel Event id 36887 - alert code 42 - every 10 seconds

    Hello,
    We 've just installed a new Lync 2013 front end server  (standard) on Windows 2012 R2, migrating from Lync server 2010.
    After moving users to new pool, we got many Schannel errors - every 10 seconds.
    event id 36887
    "A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 42"
    No user is complaining about any trouble but I would like to get ride of those errors.
    Thanks in advance for any input.
    Pierro.

    Most likely these are the certificates that were assigned from your lync 2010 to your clients and are not trusted by lync 2013. you can verify that by using get-csclientcertificate and see the certificates assgined to users.

  • Event ID 36887, Schannel 45

    Hi,
    I've been noticing the following in the Event Log:
    Event 36887, Schannel
    The following fatal alert was received: 45
    Log Name - System
    Source - Schannel
    Event ID - 36887
    Level - Error
    User - System
    OpCode: Info
    It points to an expired certificate, the thing is there are no expired certificates on this server.  The one SSL cert that I do have (for our RMM tool/IIS) is good until 2017 and has been on the system since 2012.
    I ran DigiCert's utility for finding expired certificates to confirm this.
    We thought it may be related to ConnectWise (our PSA) and had that certificate re-issued (although it was good for a couple more years also) and it made no change.  I get the errors about once per 5 minutes on this server.  It's running Server
    2008 R2 and is fully patched.
    Any ideas on how I can track down what certificate, if any, is causing this error?
    Thanks,
    Marc

    Hi Marc,
    I am sorry for the delay.
    Are there any related error messages logged under Application Logs?
    If not, then we can safely ignore this message, please refer to some related links below:
    event id 36887, alert 45
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/6cd9c7dd-140a-4779-9d8e-1059f7769cba/event-id-36887-alert-45?forum=winserversecurity
    36887 Event Id
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4b138f13-5c5c-43f5-80b5-bcc50bc4be60/36887-event-id?forum=winservergen
    SSL/TLS Alert Protocol & the Alert Codes
    http://blogs.msdn.com/b/kaushal/archive/2012/10/06/ssl-tls-alert-protocol-amp-the-alert-codes.aspx
    I hope this helps!
    Best Regards,
    Amy Wang

  • SChannel error- The SSL server credential's certificate does not have a private key information property attached to it.

    We have a public SSL certificate that allows for Active Directory sync with LDAPS on port 636 with our email smart host. This was working fine and suddenly stopped working and we are now getting SChannel errors Event ID 36869. There were no changes made
    to the Exchange server, the firewall or the DC which holds the certificate. I have run a new certreq from the DC and then re-keyed the public SSL certificate and re-installed 3 times but the error does not go away and AD Sync with the vendor
    fails. When I run LDP.exe the connection on port 636 fails with "cannot open connection" and the system event log throws the S Channel event 36869 "The SSL server credential's certificate does
    not have a private key information property attached to it"  There is no software firewall set on the DC. When I run Certutil -VerifyStore MY  it shows the current certificates as well as the revoked and expired certificates
    correctly. Certificate 0 is the public cert and is listed with Server and Client authentication, the FQDN of the server is correct and "Certificate is Valid" is listed. The private cert is Certificate 1 and has server and client authentication, the
    FQDN is correct, Private key is not exportable and it ends with Certificate is Valid. I do not see a point in re-keying the cert again until I figure out what the root of the problem is. I have read in some forums that the private cert should not be set to
    expire after the public cert but that does not make a lot of sense when in a situation like this the private cert is of course newer than the public. In fact it is too early to renew the public cert. I have been troubleshooting this for a few days and at this
    point I would have to drop my AD sync with the vendor to LDAP in order to add new users. I do not want to do that for obvious reasons and I do not want to have our spam filtering and email archive service running without Directory sync. Any help would be greatly
    appreciated.

    Hi,
    Have you tried this?
    How to assign a private key to a new certificate after you use the Certificates snap-in to delete the original certificate in Internet Information Services
    http://support.microsoft.com/kb/889651
    Best Regards,
    Amy

  • Front End Services won't start with new cert, SChannel error about hostname

    We have an existing Lync 2013 Enterprise system set up, and many of the servers are using certs issues by our local CA. I want to move several of the certs to third-party certificates so that non-domain machines can connect. The first change I'm making is
    on our Edge pool. However, I'm having an issue. Here are the details:
    Our internal domain space is int.domain.com. Our external domain space is domain.com. Our Lync FE server is LS01.int.pool.com and our FE pool is pool01.int.domain.com. I have generated a CSR and requested a certificate from Globalsign with the following
    characteristics:
    SN: pool01.int.domain.com
    SAN: pool01.int.domain.com
    SAN: domain.com (wildcard)
    SAN: int.domain.com (wildcard)
    After applying the new cert using the topology builder, I've rebooted and the Lync Front-End Server service will no longer start. The following SChannel error is in the event logs:
    The certificate received from the remote server does not contain the expected name. It is therefore not possible to determine whether we are connecting to the correct server. The server name we were expecting is ls01.int.domain.com. The SSL connection request
    has failed. The attached data contains the server certificate.
    After reverting back to the original local CA cert, the services start. The local cert has a ton of individual SANs set up but I was under the impression that the wildcard SANs were supported and would be ok for the hostnames.
    Why is it looking for my FE server name and not the pool? Is this an issue with my deployment, or is it with the cert? I'm not sure where to go from here.

    Hey Matt,
    As mentioned above wildcards are only supported for Lync web services such as lyncdiscover, dialin and meeting URL's. It is OK to have wildcards in the certificates SAN, but you must also specifically include the following:
    SN: pool01.int.domain.com (SN must be pool)
    SAN: pool01.int.domain.com (pool must also be included in SAN)
    SAN: lync-fe-001.int.domain.com (the machine name of your front end server)
    This should solve the issue for you.
    Andrew Morpeth
    Lync Server Specialist - Auckland, NZ
    Check out my blog

  • Continuous "36888 Schannel Errors" in System Event Log when NOT connected to Internet

    We are hoping someone will be able to assist with us this very strange issue please ?
    We are using Windows 8.1 x64 Enterprise with Office 2013 and the latest Symantec Endpoint Proctecion v12.1.5 installed. They are managed using SCCM2012 in a large AD domain environment
    When our workstations are NOT connected to the internet (only local intranet) the following errors appear in SYSTEM event log almost continuously (several times a minute).
    Event ID:36888  User: SYSTEM  OpCode:Info  Level:Error  Source:SChannel 
    "A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 70. The Windows Schannel error state is 11."
    The process associated with these events is "Local Security Authority Process"
    When an internet connection is enabled for these machines these 36888 errors will suddenly stop !.
    An event "Error 36887 "A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 40." Is also occurring on these machines but only occasionally.
    As a result, We suspect there must be a process continuously attempting to connect to an internet service and failing ?.
    Some of the things we have tried so far;
    - We have disabled all non-essential services (e.g. Windows Store Service) one by one but this didn't fix.
    - We have tried disabling Tile updates on Start 
    - We have tried a bunch of different Group Policy settings to disable different combinations of TLS/SSL in IE config.
    - We have searched the internet forums and tried some suggested fixes but this combination of error state and error code seems unique ?.
    It doesn't happen on our Windows 7 x64 workstations that have much same apps & configuration.
    Any advice or suggestions would be greatly appreciated !
    Thanks.

    Hi Makes006,
    This Event ID 36888 occurs if a user tries to access a web site using HTTP but specifies an SSL port in the URL.
    We can try clean boot to troubleshoot whether this issue is caused by a third party program .
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135
    If there is no sensible impacts on operating the machines ,we can try to disable this log by modify the following registry key value to 0.
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SecurityProviders\SCHANNEL\EventLogging
    For more information, please refer to the following link:
    How to enable Schannel event logging in IIS
    http://support.microsoft.com/kb/260729
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Schannel errors in logs

    I have a Windows Server 2008 R2 server flooded with Schannel Event ID's 36874 and 36888.  Can someone please help?
    The server is running Exchange 2010.
    Event 36874, Schannel
    An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed.
    Event 36888, Schannel
    The following fatal alert was generated: 40. The internal error state is 1205.

    Hi,
    Please refer to the similar threads below:
    Schannel Error ID 36888
    getting Schannel 36874 errors on my CAS/HT servers
    If the above is not helpful, please feel free to let me know.
    Best regards,
    Susie

  • Error Occured - Three state workflow

    http://www.eggheadcafe.com/software/aspnet/33106814/error-occured--three-state-workflow.aspx
    I faced this issue and was able to resolve it. I am hoping this will
    be helpful to someone who might get into trouble using the default
    three state workflow.
    I created a list and tried to use the default Three state workflow.
    The workflow was enabled to start as soon as a new list item was
    created. It started and the status was "Error Occurred". Being a Java
    guy I didn't know where to look for this error. I checked the Event
    Viewer but not much help. Is there a log file for Project Server
    application?
    Here is the reason why this happened. I had to go through most of my
    fields in the custom list to understand what was causing this problem.
    I had a field called Owner and I had enabled this option "Allow
    multiple selections: ". This caused something to break in the
    workflow. I am assuming it cannot handle a Person/Group field that
    allows multiple selections even though none of the list items actually
    had multiple persons selected.
    Hopefully this will help someone in the future if they enable any
    Person/Group field to have multiple selections.
    Kamlesh.

    http://www.eggheadcafe.com/software/aspnet/33106814/error-occured--three-state-workflow.aspx
    I faced this issue and was able to resolve it. I am hoping this will
    be helpful to someone who might get into trouble using the default
    three state workflow.
    I created a list and tried to use the default Three state workflow.
    The workflow was enabled to start as soon as a new list item was
    created. It started and the status was "Error Occurred". Being a Java
    guy I didn't know where to look for this error. I checked the Event
    Viewer but not much help. Is there a log file for Project Server
    application?
    Here is the reason why this happened. I had to go through most of my
    fields in the custom list to understand what was causing this problem.
    I had a field called Owner and I had enabled this option "Allow
    multiple selections: ". This caused something to break in the
    workflow. I am assuming it cannot handle a Person/Group field that
    allows multiple selections even though none of the list items actually
    had multiple persons selected.
    Hopefully this will help someone in the future if they enable any
    Person/Group field to have multiple selections.
    Kamlesh.

  • Schannel errors after installing November's KB2992611

    I am getting these errors...event 36887...
    A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 49.
    on my Server 2102 R2 after installing November's patches.   Microsoft released another patch, KB3018238 to fix these errors but some sites, for example...
    https://community.shavlik.com/docs/DOC-23698
    say that this patch does not apply to Server 2012 R2.  Is this correct?  If so, how do I resolve these errors on my R2 server?  They are generated mostly when I am use RDP to access the server.

    Hi,
    In brief, if "A fatal alert was received from the remote endpoint" is logged, it means that this error was not caused by the local computer, it was caused by the remote server. If we want to find why this error occurs, we need to check the
    event log of the remote server.
    Cipher suites are used for encryption and decryption.  The TLS negotiation can succeed under the condition that the server and client support at least one same cipher suit.
    To check and change the cipher suit used by computer, please refer to the link below,
    How to restrict the use of certain cryptographic algorithms and protocols in Schannel.dll
    https://support.microsoft.com/kb/245030?wa=wsignin1.0
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Schannel Errors 36874 and 36888

    Greetings,
    The scenario is the following: 1 Windows Server 2008 R2 SP1 (patched up to date).
    There are two errors that shows every 10 seconds:
    Log Name:      System
    Source:        Schannel
    Date:          19/07/2012 14:59:58
    Event ID:      36874
    Task Category: None
    Level:         Error
    Keywords:      
    User:          SYSTEM
    Computer:      Server.Mydomain.com
    Description:
    An SSL 3.0 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
        <EventID>36874</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2012-07-19T19:59:58.511146300Z" />
        <EventRecordID>5908</EventRecordID>
        <Correlation />
        <Execution ProcessID="484" ThreadID="524" />
        <Channel>System</Channel>
        <Computer>Server.Mydomain.com</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="Protocol">SSL 3.0</Data>
      </EventData>
    </Event>
    Log Name:      System
    Source:        Schannel
    Date:          19/07/2012 14:59:58
    Event ID:      36888
    Task Category: None
    Level:         Error
    Keywords:      
    User:          SYSTEM
    Computer:      Server.Mydomain.com
    Description:
    The following fatal alert was generated: 40. The internal error state is 107.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
        <EventID>36888</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2012-07-19T19:59:58.511146300Z" />
        <EventRecordID>5909</EventRecordID>
        <Correlation />
        <Execution ProcessID="484" ThreadID="524" />
        <Channel>System</Channel>
        <Computer>Server.Mydomain.com</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="AlertDesc">40</Data>
        <Data Name="ErrorState">107</Data>
      </EventData>
    </Event>
    Note: This server has IIS installed (requirement for web console of System Center Operations Manager 2012)
    The questions are:
    Is this behavior normal?
    if no
    How to fix this problem?
    Thanks in advance!

    Hi,
    This error can be received due to an incompatible browser problem and SSL 3.0 connection request cannot be handled.
    As discussed, we can modify that registry key to disable the additional secure channel event logging if every works fine.
    Also we can check the thread below. It mentioned another scenario in which the "The following fatal alert was generated: 40. The internal error state is 107." error could be received:
    Why does Window's SSL Cipher-Suite get restricted under certain SSL certificates?
    http://serverfault.com/questions/166750/why-does-windows-ssl-cipher-suite-get-restricted-under-certain-ssl-certificates
    (Note: Since the site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.)
    Regards
    Kevin

  • Schannel errors - appears to be causing blue screens

    Hi guys
    Every once in a while (a few times a month) our RDS server (server 200r82 hyper-v VM) decides to blue screen and restart.
    Each and every time it crashes, we notice hundreds and hundreds of schannel errors appearing just before the crash (event ID 36888)
    Well, it did it again this afternoon, and over the last 12 hours we noticed 1008 instances of this error, with 60 odd messages appearing within 0.2 seconds of each other, and 2 minutes before the crash.
    I also noticed that just before the crash, there were a handful of services which hung seconds before the logged unexpected shutdown event. These services are as follows.
    - UmRDPService
    - WPDBusEnum
    - UxSMS
    - Audio Endpoint Builder
    After the crash, it doesnt log any Schannel errors. although, saying this now and just checking again, it looks like its logged 127 instances of the same schannel error, starting from after around 2 hours of bringing the server back online.
    Do these Schannel errors cause blue screens/crashes? Or is it something else I should be looking at... I'm at a loss, as there's not a lot more in the way of logs that seem to be telling me what's going on..

    Hi EsDood,
    Would you please let me know complete message of Event ID
    36888? For Event ID 36888, it generally occur if a user tries to access a web site using HTTP but specifies an SSL port in the URL. Please check the Schannel tracing log if find relevant clues.
    How to enable Schannel event logging in IIS
    Please also refer to following thread and check if can help you.
    Schannel
    error, Event ID 36888? - IS there a way to Identify what causes Schannel to log error?
    In addition, I noticed that a BSOD issue occurred on the Windows Server 2008 R2. Troubleshoot this kind of
    kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Did you get any dump files? If get, please refer to
    KB315263 and check if can help you.
    If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
    To obtain the phone numbers for specific technology request, please refer to the web site listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Exchange 2013 event ID 36888 SChannel error 12 and 1203

    I am running Windows Server 2012 STD with Exchange 2013 installed on the same server. I know that Microsoft doesnt recommend to do this, but I had no choice. Errors are follow:
    A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 12.
    A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
    - System
    - Provider
    [ Name] Schannel
    [ Guid] {1F678132-5938-4686-9FDC-C8FF68F15C85}
    EventID 36888
    Version 0
    Level 2
    Task 0
    Opcode 0
    Keywords 0x8000000000000000
    - TimeCreated
    [ SystemTime] 2014-11-25T23:30:34.120233400Z
    EventRecordID 121125
    Correlation
    - Execution
    [ ProcessID] 1064
    [ ThreadID] 20184
    Channel System
    Computer server
    - Security
    [ UserID] S-1-5-18
    - EventData
    AlertDesc 10
    ErrorState 12
    System
    - Provider
    [ Name] Schannel
    [ Guid] {1F678132-5938-4686-9FDC-C8FF68F15C85}
    EventID 36888
    Version 0
    Level 2
    Task 0
    Opcode 0
    Keywords 0x8000000000000000
    - TimeCreated
    [ SystemTime] 2014-11-26T05:45:22.650086300Z
    EventRecordID 121230
    Correlation
    - Execution
    [ ProcessID] 1064
    [ ThreadID] 45336
    Channel System
    Computer SERVER
    - Security
    [ UserID] S-1-5-18
    - EventData
    AlertDesc 10
    ErrorState 1203
    Process ID 1064 is Isass.exe
    I found somewhere that error 1203 could be ignored, but nothing about error 12. 
    Server is running with selfsigned SAN certificate, hosted 2 exchange domains (10 mailboxes, 5 local, 5 linked for remote domain connected via external 2 way non transitive domain trust).
    Thank you very much for any advise.
    Regards,
    Jan
    Šerý

    Hi Jan,
    Based on my research for the Event 36888, the issue may be caused by not standard or corrupted behavior of web browsers or users, such as user use HTTP protocol to access Exchange service which is a SSL site on port 443.
    Please check whether there is a HTTP redirect configured in your IIS Manager of Exchange server. Also reset web browsers to have a try. Here are some similar thread for this issue:
    https://social.technet.microsoft.com/Forums/forefront/en-US/92c63737-c2a3-41f7-8878-3b0cf5ee95ff/new-install-event-log-schannel-event-id-36888?forum=Forefrontedgegeneral
    http://ficility.net/2013/10/21/exchange-2013-exchange-2010-windows-server-2012-schannel-event-id36888-1203-tlsssl-error-the-root-cause/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Regards,
    Winnie Liang
    TechNet Community Support

  • EVENT 36888, Schannel A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252.

    I keep losing my network connection for a few seconds at a time.  Not  a big deal unless I just spent time filling in a form and have to redo it.
    Getting:
    A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252. Using windows 8.  I just installed the new ARRIS
    TG862 provided by Comcast. 
    Any Ideas?
    Also get the following errors in my events:
    The name "WORKGROUP      :1d" could not be registered on the interface with IP address 10.0.0.2. The computer with the IP address 10.0.0.3 did not allow the name to be claimed by this computer.
    Realtek PCIe GBE Family Controller is disconnected from network.
    Any help is appreciated

    Hi,
    Critical Kernel-power event ID 41 is used appear after PC restarts or randomly restarts with error
    BugcheckCode listed or a cold reboot. Do you get BSOD and some dump files?
     Default location is %SystemRoot%\Minidump. You can upload it to skydrive, then paste link here.
    How to use Skydrive
    http://www.wikihow.com/Use-SkyDrive
    Kernel-PnP event ID 219: A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction, you can unplug any external devices (except mouse and keyboard, but please keep the latest drivers), and
    check device status in device manager, please also keep the all latest driver update of your PC.
    And for error 36888, I found a similar thread, please refer to this link
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4c5430f5-43f6-41b4-97d3-03cfb3efa70b/schannel-error-event-id-36888-is-there-a-way-to-identify-what-causes-schannel-to-log-error?forum=winserverDS
    Regards
    Yolanda
    TechNet Community Support

  • Error starting the Planning application, review the event log for details

    We are using the Hyperion Demo and there was a problem suddenly cropped up.
    While rebooting the system error is displayed saying - Atleast one of the driver is not installed.
    VMware is used to access the Hyperion Demo and when Planning application is started it gives the following error:
    Error starting the Planning application, review the event log for details
    We were using this Demo from some weeks and was able to access the workspace and others but from few days this issue is faced.
    Immediate response is highly appreciated as we are planning for a user demo in the weekend.
    Thanks,
    Ravi Kanth

    Hi Nofog / Goodwin,
    OLDAP is not running.
    Following errors are displayed:
    When VMWare is restarted: At least one service or driver failed during system startup. Use Event viewer to examine the Event log for details.
    OpenLDAP: Windows could not start the hyperion S9 OpenLDAP on Local Computer. For more information review the system even log. If this is not the microsoft service contact the service vendor, and refer to service specific code 21.
    Event log: The Hyperion S9 OpenLDAP service terminated with service - specific - erro 21 (0x15).
    Please let me know your email ids so that to send the screen shots.
    Thanks,
    Ravi

Maybe you are looking for