Schedul periodic jobs in SM36

HI All,
I have a requirement like this;
Two background jobs are to be scheduled, Job A, Job B. Both jobs will run daily.
Job A will run at 8pm, and job B will run after completion of Job A.
Through SM36 I have scheduled job A to run at 8pm, periodic, daily and Job B after job A.
This is not working, as Job A is running daily at 8 but Job B has ran only on the day when I scheduled it.
Job B is not running daily after Job A completes.
Please suggest.

Hi,
Create a event for job A and give the event name in the After event of Job B.
This will make the job B to run after the job A .
Hope this helps.

Similar Messages

I want to revoke rights so users cannot schedule periodic jobs

We do encourage users to run reports in Background but we want to prevent them from scheduling periodic jobs.
We want to have more controll over periodic jobs as we observed that users schedule them and then forget about them.
Morover this has become our audit recommendation.
As far as I can see there is no standard way to do it.
Has anyone managed to achieve it?

Hi..
while searching for the answer i have seen following interesting point.chk whether this will help you..
A job is eligible to start when both of the following are true:
The start condition specified for the job is met.
The job has been released to run.
No job can be run until it has been released, even those scheduled to start immediately. To monitor and control what jobs are submitted to run in background processing, the system can be configured so an administrator can check jobs before releasing them to run.
The release requirement can also be turned off on a per-user basis. Trusted users can be given a special authorization (authorization object S_BTCH_JOB (Batch Processing: Operations on Batch Jobs), value RELE) which will automatically and immediately release any job scheduled by that user.
http://help.sap.com/saphelp_nw2004s/helpdata/en/20/2d513897110872e10000009b38f889/content.htm
thank you
<b><removed_by_moderator></b>

How to schedule a job in SM36

Hello,
With SAP R/3 4.6C on windows/oracle, I have 2 dependents jobs.
The first one must run in the afternoon and will be schedule by a user and the second one must run during the night only if job 1 had been run by user.
Is it possible to do that with the option "After job" and by ticking "Start status-dependent" ?
thank you,
Alexandre

These will be helpful
http://help.sap.com/saphelp_nw70/helpdata/EN/ef/2c513897110872e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/20/2d513897110872e10000009b38f889/content.htm
http://www.abaplearning.com/abap-tutorials/data-interfaces/5-abap-data-interfaces/71-job-scheduling

How to schedule perioding BG job after job

My requirement is i need to schedule periodic job on daily basis, suppose i have 2 jobs A and B...then i need to start job B only and only if job A is finished..
Can you please guide me..

You cannot specify a job as "periodic" if it is scheduled to start after a job. Refer [http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm]
You can achieve in 2 ways:
1. Create a single job & define 2 steps.
2. Use SAP Event to trigger the second job. At the end of the first job raise an event which will trigger the first job.
BR,
Suhas

Scheduling background job on Logon group

Hi All,
We have 4 logon groups configured in SMLG, while scheduling the job in SM36 ->Target server field i am able to see only one group and other indivdual servers not all the Groups configured in SMLG.
Is there any option i have to check to let all the groups configured in SLMG to diaply in SM36 for scheduling so that i can select the Logon group. I tried giving the logon group names manually which are not listed in Target server field it's giving the error group not exist..
Please suggest..how to make all the Groups configured in SMLG to get displayed in SM36 for scheduling jobs...
Thanks,
Subhash.G

Target server field is Name of an SAP instance at which a background job should be run. The name has the following format: <host name>_<SAP System name>_<SAP System number>, where host name is the name of the server computer on which the instance is running, as specified in the system profile parameter SAPLOCALHOST.
The name of each instance is specified in the system profile parameter rdisp/myname.
Example: hs0123_C11_55
In programming: As the table field EXECSERVER, shows the target instance selected by the user for running a job. As the table field REAXSERVER, shows the SAP instance at which a job was actually run.
Hope this is clear.
Thank you,
Shyam

Solution Manager - ChaRM question - Scheduling periodic transports

Hi
We have a requirement to schedule transports to QAS at every 15 minutes. In the schedule manager, I don't see the option for specifying the time in hours or minutes. The minimum is a day. We tried to schedule the job through SM36 with program, /TMWFLOW/SCMA_TRORDER_IMPORT. It's just running,but not importing the transports. Any guidance is appreciated

No longer required

Set several printers as output devices when scheduling a job

Hi experts,
I am working on ECC 6.0. I am scheduling background jobs through sm36 and I must configure 3 different printers as output devices, that is to say the output must go to 3 printers at the same time. I can not find how to do it. Could you please help me ?
many thanks,
Best regards,
Guislain Libessart

Hi,
I am really sorry, about those responses but it is possible. You will have to create a POOL printer for the same.
Goto SPAD
Create a New Printer with
Device type : It should be common for all those actual printer where the printing will happen.
Device Class : Device Pool
(When you set this Device Class It will open one more tab "Device Pool" and the tab "Acces Method" will no more be there)
Goto the "Device Pool" Tab Add the printers to which the print will redirected to. And choose the option "Send to All Devices in Pool".
Now assign this POOL printer to the background job from which you want to print the outout to all those printers.
Regards,
Sanujit

Restrict Periodic jobs scheduling from SM36 or any other t-code

HI,
We would like to restrict users from scheduling periodic background jobs. Immediate jobs will be fine.
And also one more concerns is that user should not be able to directly execute any report or transaction in background periodically.
In short immediate jobs will be fine but users should not be able to set periodic jobs by any T-code.
Thanks,
Chandresh Pranami

If you search for "btcoptions" you will find a comprehensive discussion about this, and a development suggestion in the wiki.
I attempted the same and ended up recreating the UI from scratch and scheduling the report + variant from a parameter transaction they are authorized for, but the user can navigate in many transactions showing this option.
A compensating control when retiring users and central batch administration with monitoring is easier.
Cheers,
Julius

Schedule periodic Dunning job in SAP

When i execute the program: RF150SMS
I am getting the message:
Dunning run 08/04/2009 DUNNI for template not found
Message no. FM016
I am not sure If i am executing the correct program
Could you please tell how would it be possible to schedule a periodic job for printing dunning ?
Or Any advise on how to schedule the dunning job in SAP
Thank you

Hi ,
U don't need to schedule a server proxy ...as the proxy will kick in automatically as soon as the message is processed by file adapter .
Since yours is File to proxy scenario...
and you want to execute it overnight ..
You will have to control when the file is processed by XI file adapter.
Here what you can do ..
Let's just say your file gets placed in a Folder 'A' ...and your file communication channel is configured to pick files from folder B.
Write an abap code on xi box ..(or you can use a V.B. script)
which will move the file from folder A to Folder B.This code can easily be scheduled..so that it you can get files in folder B from where XI processig will kick in .
(job scheduling can be done sm36 ..use the wizard)

Job Scheduling in Solution Manager - Error creating Periodic Job

Hi all,
I am in the process of testing the Job Scheduling functionality using the Solution Manager. I have setup the criteria manager, ec. in the satellite system, and done the config in Solman as well.
I am able to successfully setup up a 'on-time' job.
it's only when I try to setup a periodic job, I end up getting following error
Any thoughts? Is there any piece of config that's missing? All the SICF services needed for this functionality are running fine.
Thanks for the help.
500 Internal Server Error
Error when processing your request
What has happened?
The URL https://fsspsm.target.com:/sap/bc/webdynpro/sap/wd_ags_ejr_job_req_gaf_app was not called due to an error.
Note
The following error text was processed in the system PSM : Message was not created
The error occurred on the application server fsspsmap01_PSM_00 and in the work process 1 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Function: BAPI_NOTIFICATION_CREATE of program SAPLDSWP_NOTIF
Method: MSG_SUBMIT of program CL_DSMOP_BSP_NOTI_MODEL=======CP
Method: SUBMIT_REQ_CRM_DATA of program CL_AGS_EJR_JOB_REQUEST_FACTORYCP
Method: SUBMIT of program CL_AGS_EJR_JOB_REQUEST_FACTORYCP
Method: PROCESS_SCENARIO_PERIODIC of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: PROCESS_JOB_SCENARIO of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: IF_AGS_EJR_JSM_PROC_FPM_CTRL~AFTER_PROCESS_EVENT of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: AFTER_PROCESS_EVENT of program /1BCWDY/K54G9RCMK7J4Z427H49S==CP
Method: IWCI_IF_FPM_APP_CONTROLLER~AFTER_PROCESS_EVENT of program /1BCWDY/K54G9RCMK7J4Z427H49S==CP
Method: CALL_UIBB_PROCESS_EVENT of program CL_FPM========================CP

Hello,
This is the basic Job Scheduling functionality and not the Redwood Job scheduling, correct?
Have you performed the IMG Activiteis in SPRO?
See the following Help link:
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/c5/7edcbd58ce4e29bc1baf1c4761d71f/frameset.htm
Change a job
You can change the scheduling of a job as long as it has not been completed. Proceed as follows:
Make changes.
Note
When you change a periodic job, the system searches for the changeable successor and only changes this successor.
If there is more than one changeable job with the same name, the system does not change any of these jobs.
End of the note.
Save your entries.
To release the job in the target system, select Release.
You go to the transaction SM37 in the target system.
You just may want to ensure HTTP Services have been enabled. I realize you said the services workin SICF, but this needs to be verified as 500 Internal Server Error most often means the HTTP services are not activated.
Regards,
Paul

Problem in periodic job scheduling in LBWE

hi,
i have activated the Material movements datasource 2LIS_03_BF. Filled up the set up table.
now when i try to schedula a job in jobcontrol, under the tab *immediate* the immediate start check box is checked and disabled. the periodic job check boxat the bottom is unchecked and disabled.
the periodic values button which has to be near the check button is not present.
i even tried for other datasources, the periodic job is disabled in all and periodic values button is not found.
could anyone suggest me on this issue.

Hi,
Did you initialize delta for 2LIS_03_BF from BI? If not, first initialize the delta and try to schedule V3 job from LBWE.
By default *Immediate start * check box will be in disable mode. If you want to run it immediately just click on Save button.
If you want to schedule it for future date and time then click on Date/time button then enter schedule start date and time and click on Save button.For more details about scheduling options please look at following link.
http://help.sap.com/saphelp_nw04/helpdata/EN/c4/3a7fae505211d189550000e829fbbd/frameset.htm
hope it works...
regards,
Raju
Edited by: VaraPrasadraju Potturi on Aug 3, 2009 8:54 AM
Edited by: VaraPrasadraju Potturi on Aug 3, 2009 9:02 AM

How to schedule ETL jobs to run periodically after BI Apps is up and runnin

Hi,
How do you schedule ETL jobs to run periodically after BI Apps is install and configured? Is there document out there that explains how the ETL scheduling is setup?
Thanks

Using DAC we can schedule the ETL to run periodically. In DAC Execute -> Scheduler you can set the date and time for the ETL which need to be scheduled. You can get detail information in guide 'Oracle® Business Intelligence Data Warehouse Administration Console User’s Guide'

Want to schedule a Job (Strt Cond after JOB which should be periodically !!

Transactions : SM36 SM37 SM37C SM62 S64 SE38
Requirement
JOBA should execute program PROG1 with variant VARPROG1 in background everyday @ 10 AM.
JOBB should execute program PROG2 with variant VARPROG2 in background after JOBA
JOBC should execute program PROG3 with variant VARPROG3 in background after JOBB
JOBD should execute program PROG4 with variant VARPROG4 in background after JOBC.
When i schedule the above jobs for one day ..It works fine !!
We Require when JOBA scheduled daily / JOBB / JOBC / JOBD should should follows,
which will not happen with a option : "Start Condition : After a JOB"
irrespective technical i scheduled 1st job daily and JOBB / JOBC / JOBD as mentioned above. Result : !st dya all jobs got executed and 2nd day only 1st job got released ans got executed.
How can we acheive this ??
Rgds

Hi,
You follow the below process.
1) Define a BG job in your system with Daily Frequency and have four variants in that jobs such a way.
Step-1 ---program PROG1 with variant VARPROG1
Step -2 ---program PROG2 with variant VARPROG2
Step-3 - program PROG3 with variant VARPROG3
Step -4 program PROG4 with variant VARPROG4
If you define the job in this way, this will ensure that Prog -2 will only start when Prog -1 will be over and similarly other will also follow the sequence and in this way you achieve the Daily frequency also.
With Regards,
Saurabh

How to schedule batch jobs to run after another periodically?

Hi good people,
I want to schedule batch jobs to run periodically one after another.
Here is the problem:
I have scheduled JOB1 to run once a week and I scheduled JOB2 to run after that job (JOB1). The problem is that JOB2 runs only after the first time that JOB1 runs. The second time the JOB1 runs the JOB2 is not started. I presume that the reason for that is that JOB2 is tied to the job number for the JOB1, and since a new job (with the new number) is created every week, the JOB2 is only tied to the first instance of JOB1.
So does anyone have an idea how to get JOB2 to automatically run every week after JOB1? One idea is to use events, but that I'm hoping that there is a bit cleaner solution..
Best Regards,
Armin

Hi
Try scheduling both JOB1 & JOB2 in a single job in steps.
First schedule JOB1 & then give JOB2 in steps.
Kindly check the following link to do job scheduling in steps:
http://help.sap.com/saphelp_47x200/helpdata/en/c4/3a7ed1505211d189550000e829fbbd/frameset.htm
In the above help documentation, look for the topic <b>"job steps"</b> in
"Background Processing: Concepts and Features"
hope it helps!
best regards,
Thangesh

Standard SAP periodic job to schedule import of requests in target system?

Hello Folks,
Is SAP standadard job available to schedule periodic import of requests available in the target system. I know it is not advisable to do something like this, but i remeber some one telling me there is one available.
Regards,
Prashant

Thanks for you replies folks... so...there's no standard job available. Its got be scripts at OS level, and ofcourse scheduling "import all" options....
but as we agree, this is not a recommended option.
Have a good day...
regards,
Prashant

Schedul periodic jobs in SM36

Similar Messages

Maybe you are looking for