Schedule line date is not updating in line with P.O confirmation.

hi,
when sales order created for individual requirements it automatically creates P.R and this P.R is converted to P.O.
whenever this P.O is updated with confirmation category like acknowledgement or inbound delivery it should update Sales order schedule line for the delivery date. but this is not happening, what is the configuration required for this.
Kindly reply.
Regards,
Venkatesh

hi,
when stock is not available then the customer order is booked as special requirement and P.R created against that order. Then the P.R is converted in to P.O and P.O is updated by O.A or Inbound delivery but the delivery dates from O.A or inbound does not update the sales order schedule line.
Regards,
Venkatesh

Similar Messages

Deactivation date is not updating in Asset Master after retirement (ABAON)

Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.J

Dear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J

Data is not updated in the database

hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
     TextField ccod,cname,add,phno,conp,email,fax;
     Label l1,l2,l3,l4,l5,l6,l7;
     Button save,exit;
     Connection con;
     ResultSet rs;
     Statement stmt;
     String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
    super("CustomerDetails");
    setSize(700,750);
    setLayout(null);
    setBackground(new java.awt.Color(245, 117, 105));
    l1=new Label("Customercode");
    l2=new Label("CompanyName");
    l3=new Label("Address");
    l4=new Label("PhoneNumber");
    l5=new Label("Contact person");
    l6=new Label("EmailAddress");
    l7=new Label("FaxNumber");
    l1.setBounds(20,100,100,70);
    l2.setBounds(20,180,100,70);
    l3.setBounds(20,270,100,70);
    l4.setBounds(20,340,100,70);
    l5.setBounds(20,420,100,70);
    l6.setBounds(20,500,100,70);
    l7.setBounds(20,580,100,70);
    ccod=new TextField();
    cname=new TextField();
    add=new TextField();
    phno=new TextField();
    conp=new TextField();
    email=new TextField();
    fax=new TextField();
    ccod.setBounds(200,120,150,50);
    cname.setBounds(200,200,150,50);
    add.setBounds(200,280,150,50);
    phno.setBounds(200,360,150,50);
    conp.setBounds(200,440,150,50);
    email.setBounds(200,520,150,50);
    fax.setBounds(200,600,150,50);
    Button save= new Button("Save");
    Button exit= new Button("Exit");
    save.setBounds(200,680,100,40);
    exit.setBounds(350,680,100,40);
    add(l1);
    add(ccod);
    add(l2);
    add(cname);
    add(l3);
    add(add);
   add(l4);
   add(phno);
   add(l5);
   add(conp);
   add(l6);
   add(email);
   add(l7);
   add(fax);
   add(save);
   add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
      String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      con=DriverManager.getConnection("jdbc:odbc:prism");
      stmt=con.createStatement();
      rs=stmt.executeQuery(query);
      stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
   Customerdetails cud= new Customerdetails();
}

This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M

Data is not updating in DB Table

Hi...All
we have done the RFC-JDBC Synchronous scenario, we are getting the success messages into SXMB_MONI ,in the CCM also it was showing success. but data is not updating in to the Database Table. client want to see the response data in the Database Table only.
pls help me this is very urgent.
Regards,
Pasi.

Hi,
If everything is working fine in XI there is some problem in database end only while query gets executed. Try debuging the sql query which you have by giving log statement and see what the query generated is.
Got to your receiver jdbc communication chalnnel , Advance mode > Additional parameters,
Enter logSQLStatement in the name column and true in the value column
To view the SQL log Click on the message ID of the communication channel monitoring.
or, alternatively, in Runtime workbench, click your message> details> audit log tab.
Run the interface once more. Check the communication channel now. It will show the actual insert statement which is trying to insert into the DB and then you can figure out what is the query being fired to database and see if it is fine.
Copy the same query and run in databse. you will be able to find the exact problem.
thanks
amit
reward point if answer is useful

When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.

Hi,
When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.
Active directory attribute co have value vietnam but in FIM Portal country attribute have value VIET NAM
we simply mapped AD Attribite to FIM Attribute for inbound
co===>country
why this happen
Regards
Anil Kumar

Anil, please check what do you have in metaverse. It seems that you have attribute flow precedence configured in a way that doesn't export to FIM Portal.
Let's say you have flows like:
(AD MA)
Import flow: (AD) description -> (metaverse) description
(FIM MA)
Import flow (FIM) description -> (metaverse) description
Export flow (FIM) description <- (metaverse) description
And you have higher precedence from FIM. Then, you would never have FIM value updated - even if value in AD changes. It would be exported to FIM only when you don't have this attribute filled in FIM.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

Last stock update Date Tab not updating in ICH

Hi Team
I observed that in ICH screen Last stock update Tab is not going to update every time while demand and stock information coming from ECC to ICH.
There is no stock inconsistency. All stock tab information are updating correctly in ICH compare to ECC system.
Only this Last stock update tab Date are not updating.
What is the reason behind this?
Could you please help me to resolve this?
Regards
Virendra Kumar
09769396038

Hi Virendra
It is a bug, please report to SAP and get fix
which version you are using and what is the patch level?
1341691 should be helpful check out
Best Regards
Vinod

Time/date will not update

After updating software, the time/date will not update. My network is fine and I can get to the internet fine. Also will not accept my apple ID

Try restarting the Apple TV by removing ALL the cables for 30 seconds.

System status NTUP (Dates are not updated)

Hi Guys,
WBS Element has the system status NTUP (Dates are not updated) the option to untick this is greyed out and it is preventing the posting of a journal.
Could you please let me know how to remove this system status.
Regards,
Abdul Rehman

Hi Amit,
Thanks for your reply,
WBS is released and there is no user status as well but besides NTUP another system status is there i.e ACPT(Order accepted) is this is causing any problem for genral postings?
Could you please also let me know how status NTUP got activated when i am checking in the change log it is not showing any name.
WBS is very much an account assignment element.
Regards,
Abdul Rehman.

Statistical delivery date is not updating automatically or by default

When creating the PO delivery date of a item in PO,is picking,but statistical delivery date is not updating automatically or by default. I am not getting this automatically .Its need for vendor evaluation.

Hi,
Check on it:-
Statistical Delivery date vs Confirmed Delivery date
pherasath

Has anybody noticed that Last played dates do not update?

I have recently noticed that the playcounts and last played dates are not updating. When you play a song it does not update the last played date.
Did anyone come across with this issue

Yep, same for me. When i play on my iPhone, it doesn't update in iTunes using iTunes Match.

Asset Line items are not updating in table ANEP

Hi friends,
I found that asset line items are not getting updated in ANEP table,.
This is my precedure for posting of depreciation.
I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
Where is the mistake in my process..
thanks in advance..
Naveen

HI Naveen
The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
ANEA should be the solution you are looking for.
Hope it helps!
Cheers
Z

Line Item Text not updated in SPL

Hi All,
Can anyone help me in this regard.
When we change the Line Item Text in FI document the same has not been updated in SPL. Can anyone know the required configuration to be done in order to populate the changed items in SPL.
Any help is highly appreciated.
Thanks,
Srini

HI,
a text change in general ledger line item will not be forwarded to spec. ledger automatically (as the change of a line item text triggers no posting to spec. ledger).
But as you know the document relationship from GL doc. to SL doc go to the corresponding SL doc. and change the text if this is really needed (don't understand why the line item text is that important).
Best regards, Christian

Data is not updating in database when workflow is completed........

Hi all,
   I am working on ESS leave request workflow.
   After the approval is being made by the agent, the relevant data is not getting updated in the database. There is no entry regarding the leave period in PA20.
Is it a workflow issue???
Is it something related with commit work???

Hi
Did you try to run and check, the report RPTARQPOST report from the back end. This report is resposnible to post the data into the workflow and complete the workflow. But as you mentioend that the workflow is getting completed then in this case I think you might be already scheduled the above report. Did you check with any kind of authorizations with the user under which the background job or the user who is runnig the report.
There could also be a possibility that the applied user might not have right authorizations to manupulate Absences Infotype 2001. PLease check teh roles associated with the users in PFCG txn.
Regards
Pavan

Sales order request date could not updated by the interface.

Hi Experts.
Please refer to following scenario:
1.Sales order line with quantity 1000.
2.Customer wants to split the order quantity to 200 & 800, by the same time, need to specify the request date for the newly added line (With quantity 800)
But the request date always defaulted from the order header level.
Refer to the following scripts:
INSERT INTO oe_headers_iface_all
order_source_id,
orig_sys_document_ref,
operation_code,
created_by,
creation_date,
last_updated_by,
last_update_date,
change_reason,
ORG_ID,
CHANGE_SEQUENCE,
FORCE_APPLY_FLAG
VALUES
0, -- order_source_id
'OE_ORDER_HEADERS_ALL372793', -- orig_sys_document_ref
'UPDATE', -- operation_code
12613, -- created_by
SYSDATE, -- creation_date
12613, -- last_updated_by
SYSDATE, -- last_update_date
'SYSTEM',
204,
2,
'Y'
INSERT INTO oe_lines_iface_all
order_source_id,
orig_sys_document_ref,
orig_sys_line_ref,
orig_sys_shipment_ref,
operation_code,
ordered_quantity,
created_by,
creation_date,
last_updated_by,
last_update_date,
change_reason,
org_id,
CHANGE_SEQUENCE,
inventory_item_id,
OVERRIDE_ATP_DATE_CODE
VALUES
(0, -- order_source_id
'OE_ORDER_HEADERS_ALL372793', -- orig_sys_document_ref
'OE_ORDER_LINES_ALL687228', -- orig_sys_line_ref
'OE_ORDER_LINES_ALL687228.1', -- orig_sys_shipment_ref
'UPDATE', -- operation_code
800,
12613, -- created_by
SYSDATE, -- creation_date
12613, -- last_updated_by
SYSDATE, -- last_update_date
'SYSTEM',
204,
2,
245205,
'Y'
INSERT INTO oe_lines_iface_all
order_source_id,
orig_sys_document_ref,
orig_sys_line_ref,
split_from_shipment_ref,
split_from_line_ref,
operation_code,
ordered_quantity,
created_by,
creation_date,
last_updated_by,
last_update_date,
org_id,
CHANGE_SEQUENCE,
inventory_item_id,
REQUEST_DATE,
OVERRIDE_ATP_DATE_CODE
VALUES
(0, -- order_source_id
'OE_ORDER_HEADERS_ALL372793', -- orig_sys_document_ref
'LT_TESTLINE', -- orig_sys_line_ref
'OE_ORDER_LINES_ALL687228.1', -- split_from_shipment_ref
'OE_ORDER_LINES_ALL687228', -- orig_sys_line_ref of the line for which you want to split the line
'INSERT', -- operation_code
200,
12613, -- created_by
SYSDATE, -- creation_date
12613, -- last_updated_by
SYSDATE, -- last_update_date
204,
2,
245205,
'22-NOV-2014',
'Y');
3.SO has been splitted to 2 lines:
1.1. 800 request date 12-NOV-2014
1.2 200 request date 12-NOV-2014
Christy

Hi
Sorry , for keeping messing up :
38.45.0 is referring to Invoice row level base key
logic is saying Delivery number is equal to invoice row level base key
If you look at the link and Gagan answer ,your problem should have been solved .
Please close this thread if your problem is solved .
Thann you
Bishal
Definitely need a coffee to start my day
Edited by: BIshal Adhikari on Jul 9, 2009 6:44 AM
Edited by: BIshal Adhikari on Jul 9, 2009 6:44 AM

Schedule line date is not updating in line with P.O confirmation.

Similar Messages

Maybe you are looking for