Scheduled jobs are in released state only

Dear Experts,
we shedule jobs in background periodically. But for a particular time, all scheduled jobs are in released state only. Please suggest what might be the issue. Even some SAP std jobs have have not started.

Hi Raghavendra,
Have you checked enough BTC work process available in your SAP system.
Use SM65 transaction,goto =>Additional Tests ;check mark "Determine work process status" and "Determine no of jobs in queue"
and see the test results for any problems.
Best Regards,
Shyam Dontamsetty

Similar Messages

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Process chain jobs struck in released state

Hi,
We have a strange problem with process chains, After the process chain is
triggered in the middle of the PC, one of the process step job is getting struck
in released state and not moving to active, what might be the probelm, please suggest.
Thanks.

Hi....
Actually this issue sometime happens due to more number of active jobs in the system.........If the number jobs running is huge.........then there will be no free work process.........and all the jobs will stucked in release state only......
Also due to poor system performance also we face this issue.......check ST04 if there is any locks or deadlocks.......Also check ST22 for shortdumps and check the system log in SM21.........
This also sometimes happens due to memory problem.....
You can manually trigger the event to make the job active ..........Right click on the process>> Go to Display messages >> from the chain tab copy the After event and With Parameter.............go to sm64.............search the after event >> click on execute>> give the parameter and execute............it will start the job.............
U can also use the Function module BP_EVENT_RAISE............go to SE37 >> BP_EVENT_RAISE >> Click on Text/Execute.........give the copied event and parameter and execute.......
Hope this helps........
Regards,
Debjani.........

Jobs are not released

Hello Guys ,
STandard jobs are not released .can u please tell me the reasond???

Hi
Is this a new system or a copied system? Generally this happens in a copied system since the default server group still has the source system information and hence jobs will not run. Goto Txn SM61 and look for Job group. In the default list, you should see your server instance name. If it is showing any other name, just delete the entry and add the current instance to the list.
Hope it helps
Javed
Edited by: Javed Sapstar on Dec 27, 2010 9:41 AM

Jobs are in ready state

Hi,
Kernel Release-701
OS-Linux
Patch level-117
dev_disp
ERROR => DpWPCheck: W55 (pid 7299) died (severity=0, status=11) [dpxxdisp.c   15884]
child (pid=7299) killed with signal 11
ERROR => DpWPCheck: W56 (pid 7523) died (severity=0, status=11) [dpxxdisp.c   15884]
child (pid=7523) killed with signal 11
ERROR => DpWPCheck: W57 (pid 23473) died (severity=0, status=11) [dpxxdisp.c   15884]
child (pid=23473) killed with signal 11
ERROR => DpWPCheck: W58 (pid 7526) died (severity=0, status=11) [dpxxdisp.c   15884]
child (pid=7526) killed with signal 11
ERROR => DpWPCheck: W60 (pid 7528) died (severity=0, status=11) [dpxxdisp.c   15884]
child (pid=7528) killed with signal 11
SM21 logs
08:00:05 BTC 055 000 SAPSYS                  EC F Failed to create log for job /
08:00:05 BTC 055 000 SAPSYS                  EA Y Failed to read status entry for job
08:00:05 BTC 055 000 SAPSYS                  EB C > Job
08:00:05 BTC 055 000 SAPSYS                  F2 0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
08:00:05 BTC 057 000 SAPSYS                  EC F Failed to create log for job /
08:00:05 BTC 057 000 SAPSYS                  EA Y Failed to read status entry for job
08:00:05 BTC 057 000 SAPSYS                  EB C > Job
08:00:05 BTC 057 000 SAPSYS                  F2 0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
08:00:06 BTC 060 000 SAPSYS                  EC F Failed to create log for job /
08:00:06 BTC 060 000 SAPSYS                  EA Y Failed to read status entry for job
08:00:06 BTC 060 000 SAPSYS                  EB C > Job
08:00:06 BTC 060 000 SAPSYS                  F2 0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
08:00:06 BTC 056 000 SAPSYS                  EC F Failed to create log for job /
08:00:06 BTC 056 000 SAPSYS                  EA Y Failed to read status entry for job
08:00:06 BTC 056 000 SAPSYS                  EB C > Job
08:00:06 BTC 056 000 SAPSYS                  F2 0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
08:00:06 BTC 058 000 SAPSYS                  EC F Failed to create log for job /
08:00:06 BTC 058 000 SAPSYS                  EA Y Failed to read status entry for job
Some jobs are going in ready state
If i check them then job execute successfully.

Hi,
As per my personnel experience, there are lot of errors in kernel support pack 117 of 701 release. Try to use patch level 111 which is good.
Also, run TEMSE consistency check to check any inconsistency.
Thanks
Sunny

Promotion and report schedule job goes to pending state

hi everyone,
we are using BO4.1 SP02 Patch 1 platform, suddenly now report schedules and promotion jobs are not promoting and it goes pending state.
we restarted the LCM APS and AJS , but still promotion job in pending state
we also restarted Webi APS and AJS but still schedule in pending state.
anyone faced this problem before, could you please help us to find the cause.
Regards,
Ganesh

HI Ganesh
Can you make it 1 and try out once
Because 1 = OUTPROC and 100 = MIXEDPROC
Outproc causes the job server children to shut down after every job
Mixedproc causes the job server children to shut down after every 100 jobs
and Job server children will be automatically shutdown if left unused for more than 2 hours
Can you check the taskmanager for the jobserverchild.exe is created or not ???
Please get back

Some Schedule jobs are not running in Oracle 10g

i have total of 8 Schedules jobs in Oracle 10g test database which were not in sync with prod database . So i re-created all of them again and then enbled them . but some 4 of them didnt ran on their NEXT_RUN_DATE . Showing NULL on LAST_START_DATE and LAST_RUN_DURATION . How to make them Run
select OWNER,JOB_NAME,START_DATE,STATE,SCHEDULE_NAME,LAST_START_DATE,LAST_RUN_DURATION,NEXT_RUN_DATE from ALL_SCHEDULER_JOBS
where OWNER='MESH_FOR' and last_start_date is NULL;
OWNER     JOB_NAME     START_DATE     STATE     SCHEDULE_NAME     LAST_START_DATE     LAST_RUN_DURATION     NEXT_RUN_DATE
MESH_FOR     REFRESH_TERMINALS_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     REFRESH_MN_SERVERS_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     REFRESH_EVENT_INFO_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     UPDATE_MV_CHANGES_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00

Hi,
Could you please explain, what is OS authentication?
I created a new user for creating and runing jobs.
I have given following priveleges to the new User.'
1)Connect
2)SELECT_CATALOG_ROLE
3)Create Job
Then, I created the job as follows.
BEGIN
sys.dbms_scheduler.create_job(
job_name => 'SMPL_TST_JB',
job_type => 'PLSQL_BLOCK',
job_action => 'Declare
Result Integer;
begin
Result:=1;
/* Other statments */
Exception
when others then
Result:=3;
end;',
repeat_interval => 'freq=daily;byhour=10;byminute=00;bysecond=00',
start_date => systimestamp,
job_class => 'DEFAULT_JOB_CLASS',
auto_drop => FALSE,
enabled => TRUE);
sys.dbms_scheduler.set_attribute( name => 'SMPL_TST_JB', attribute => 'logging_level', value => DBMS_SCHEDULER.LOGGING_FULL);
sys.dbms_scheduler.set_attribute( name => 'SMPL_TST_JB', attribute => 'restartable', value => TRUE);
END;
Then, I run the job as following.
SQL> begin sys.dbms_scheduler.run_job ('SMPL_TST_JB'); end;
2 /
begin sys.dbms_scheduler.run_job ('SMPL_TST_JB'); end;
ORA-03113: end-of-file on communication channel
Thank you,
Regards
Gowtham Sen.

ODI 11g Scheduled job stays in running state

Hello All ,
In ODI operator in the integration process ,there arer 3 scenarios scheduled .
When the first is completed it switches to second ,but the next step/process keep running and never comes to an end,though the corresponding backend activity has been completed(which the scenario is supposed to do).
Which ultimately results into timeout.
Please suggest a solution for this.
Thanks in advance ,
ABHIJEET

Hi,
Actually your syntax is exactly right for running a single run-immediate job.
it looks like the slave running your job may have crashed or terminated unexpectedly. You should do a stop_job (force=>true) on your job and you should look through your job slave trace files j0trc for reasons why your job slave did not finish the job. You can also try grepping your job slave traces for the job name 'TEST_JOB' to find the right trace.
Hope this helps,
Ravi.

What is released job and scheduled job?

Hi BW experts,
Please let me know what is released job and scheduled job?

Hi
<b>Released job</b>:The job has been fully defined, including a start condition. Without a start condition, a job cannot be released.
Only an administrator or a user with appropriate authorizations for background processing can release a job, preventing unauthorized users from running jobs without approval.
<b>scheduled job:</b> The job which is scheduled for a particular time and that will come into the queue of jobs to which time it is scheduled.
U can see these jobs in SM37 tcode

How to find what sql statement is currently running by scheduler job?

Hi
I scheduled a stored procedure to run every 5 minutes using dbms_scheduler.
The stored procedure internally call serveral other stored procedures.
The scheduled job is in running state and right now I want to find out what is the sql statement the job executing.
Is there any sql query to find out what is sql query the schedular job is running?? Please help me.
Thanks in Advance.

The previous sql id is null in this case.
I already quoted as I am running a pl/sql block in my scheduler job.
begin
usp_test('praram');
end;
I am using the pl/sql block as above in my scheduler job. The USP_TEST inturn calls some other stored procedures and each stored procedure has several inserts and update statements.
The scheduler job is still running. I know the sid of the running scheduler job.
I want to know the job is at which stored procedure and at which insert/update statement.
Please let me know is there any query to fulfil my requirement?
I greatly appreciate your help
Thanks

Scheduled Brio/IR Jobs are not running as expected in EPM 11.1.2.2

Hi All,
We are observing some scheduled jobs are not running as expected,they are not running on the scheduled time.
Given below are more details.
We have 2 Jobs running at 6:00 AM daily based on single Recurring Time Event and it is observed that this jobs are not running on time(ex: 6:06 AM EST).
I tried verifying Consolidate Job Status in workspace admin options and the v8_RecurtimeEvent table for any miss in the 'Next Run Time',
but they were having the scheduled date/time of run.No clue from EPM Logs.
Interesting observation is the same jobs are running after updating the schedule time a little bit further(ex: 6:06 AM to 6:07 AM),but again after some days
the updated job(6:07 AM ) will stop running.
Thanks,

Put the IR job logs in TRACE:32 mode which will give more information in the logs . Refer this document link to put in TRACE mode :http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_1112200.pdf
Thanks,
KK

Job is in suspened state

Dear SDNers,
How do we know a job is in suspended state.
because some of my ECC jobs are in Released\ from last 2 days and scheduled time as 2 days back only..it runs for every 3 hrs .
Thanks,Swathi

Hi,
Well here's what you need to do.
If the job is in 'Released' state in ECC, that implies that it has received no background work process (WP) to start the activity.
Please check the background work processes with SM66 or SM51 (here choose the server and check the work process status).
Check how many BGD (background) work processes are in 'Waiting' state.
Here the work processes will most probably be either 'On hold' or 'running' state. Go inside the work process and see what activity was being done last after which it got stuck and then inform the basis team to end the work process forcefully.
This will solve your issue.

How can I locate a Scheduler job?

Hi there,
In the alert log, I see the following error :
ORA-12012: error on auto execute of job 2915
My question is - how do I find the definition for job 2915?
And before you say - "that's easy, it's in all_scheduler_jobs", it's
not in all_scheduler_jobs. The old dbms_job package had a column for
job number, but the Scheduler doesn't. I've scrutinized the definition for
all the Scheduler views, but nothing reveals the job number.
When I look at all the jobs listed in dba_scheduler_jobs, nothing seems
likely to be this mysterious job 2915.
Does anyone have any idea how I can locate it?
Thanks!
Paul Stuart

Hi,
Actually I've been meaning to write this info up as a DBA tip, but never get round to doing it...
The job number referred to is in fact the Object ID of the Job when dealing with a new Scheduler job and not an original DBMS_JOB job.
Scheduler jobs are database objects now rather than just 'rows in a table' so have an object ID, visible in dba_objects. But the dba_scheduler jobs view does not display this column!
See this example, I create a Job that refers to a non existant procedure. The object ID matches that put into the alert log when it fails only a second later:
SQL> declare
2    jname varchar2(30) := 'JOB_TEST';
3    jtype varchar2(16) := 'PLSQL_BLOCK'; -- 'PLSQL_BLOCK', 'STORED_PROCEDURE', 'EXECUTABLE'
4    jaction varchar2(256) := 'not_a_real_proc;';
5 begin
6
7    dbms_scheduler.create_job (
8                  job_name        => jname,
9                  job_type        => jtype,
10                  job_action      => jaction,
11                  start_date      => systimestamp,
12                  enabled         => TRUE,
13                  auto_drop       => FALSE,
14                  comments        => 'Test job can be dropped'
15                  );
16
17 end;
18 /
PL/SQL procedure successfully completed.
SQL> select object_id, object_type,object_name
2 from dba_objects
3 where object_name = 'JOB_TEST' and object_type = 'JOB';
OBJECT_ID OBJECT_TYPE         OBJECT_NAME
     53645 JOB                 JOB_TEST
SQL> select job, error_date, error_line2 from dba_job_errors;
       JOB ERROR_DATE          ERROR_LINE2
     53646 04/09/2007 22:03:17 PLS-00201: identifier 'NOT_A_REAL_PROC' must be declaredHTH
Chris

Schedule Job Execution problem

Hi All,
The schedule jobs are taking more time.... to complete
We have schdule jobs which will run for every hour,soo to execute the job sometimes it is taking 1hr and sometime 30mins
please help me to have the Job execution total time to be constant to near 30mins.

preethi wrote:
Hi All,
The schedule jobs are taking more time.... to complete
We have schdule jobs which will run for every hour,soo to execute the job sometimes it is taking 1hr and sometime 30mins
please help me to have the Job execution total time to be constant to near 30mins.Thread: HOW TO: Post a SQL statement tuning request - template posting
HOW TO: Post a SQL statement tuning request - template posting

Starting Scheduled JOB by OMBPLUS

Hi all,
Can OMB+ start a scheduled job ?
I can't find the scripts....
I would promoting to production only using OMB+ !
I'm using OWB 10gr2 on DB 10gr2 and OWF 2.6.4 on UNIX.
Thanks,
Marco

Hi Marco,
in 10.2 and asuming you are using DBMS_SCHEDULER, then scheduled jobs are started by the scheduler process itself, which is always running as long as the database is up.
OMB+ is used for object administration, if you will, while the WF Server and Scheduler processes are used for object execution.
Cheers,
Donna

Scheduled jobs are in released state only

Similar Messages

Maybe you are looking for