Scheduled report ( Do not send when no dada found )

Hi
good morning everybody
I have a scheduled report in my work that sends daily cash spends to our managers , it works fine, but also sends with an empty attachment the day that company does not spend ,
I want the scheduled report not to be sent when there is no data,
can i do this ?
thank you soo much

Hi Larry,
Generic paper 8 1/2" by 11" is standard but most printers have different physical printable paper area. Page margins come into play now. For example if you design a report using the generic printer driver and set your printable area margins to zero, now when you select a printer that has a 1/2" margin because it can't physically print to the whole paper size CR will have to adjust the margins and will likely start chopping off field info or in your case we may try to re-align the objects to fit.... It may be also that when you designed the reports the printer driver you were using may have problems which introduced problems in the report layout....
Even if you don't select a printer depending on the version of Crystal we still use either the default printer or Microsoft's Generic Printer driver to format the page. It's either that or the screen driver but that would be impossible to do alone...
In any event using the no printer option can cause more problems than it resolves.
The next issue is with printer drivers, we had multiple escalations to try to "resolve" printer driver problems and 90% of them are due to old legacy and non-unicode compliant drivers.
This is what I mean by producing a list of supported printers that you can test with.
Thanks again
Don

Similar Messages

Emails will not send when connected to wifi

Emails on my iPad and iPhone will not send when connected to wifi, any help would be appreciated

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Scheduled report is not triggered by another report on which it depends

Hi folks,
I intend to trigger a group of reports by running a dummy-report (it does not more than executing the function currentDate() and displaying the result in a text field) manually (using InfoView) and use the success of this report as the trigger event for each report of the mentioned report group.
I tried to start off with only one report to be triggered. This report is scheduled to write an Excel-Sheet to the Default Enterprise Location with a scheduling interval of 5 minutes. The report runs fine within the specified intervals without having specified the dummy-report as a prerequisite event for the actual data report.
As soon as I define the dummy-report as a triggering event for the data report, the data report is not executed regularly any more, i.e., the first instance appears and remains as "Recurring" in the history list and nothing more happens.
I first schedule the data report as indicated and then fire up the dummy-report using "Now" from the drop-down list. Interestingly, I have to press the "Refresh Workspace Panel"-Button, before the status of the dummy-report changes from "Running" to "Success", although the report does not a lot. But, as mentioned, the data report is not triggered.
What am I might doing wrong?
Cheers
Bobbyy

Hi
When the first time you are placing the excels sheet, the dependent report runs successfully.
For it to trigger next time the excel sheet should be deleted from that location. Only the occurence of the excel sheet will trigger the second report, so this should be deleted.
Gangadhar

Scheduled reports do not run/get delivered?

Im new to business objects. We are running XI R2 currently. I have imported some objects/reports. I can run them successfully. I have now set them to be scheduled to run once a day and email myself and a coworker. When I go to history tab and say Run Now, the reports get emailed to both of us, and look great.
However, these same reports are not being generated or emailed once a day like Ive requested. Im not getting an error anywhere (or I dont know where to look). What is causing the schedule not to run?
All my services are running (jobserver, etc.).
M

Hi Maria
Is this your clustered environment? Are you able you to schedule the same Report for short duration,
like 5 minutes or 10 minutes?
What is the type of Report your scheduling? (Crystal Report, Web Intelligence or Desktop Intelligence)
Is this problem coming with any specific report or every report?
Regards,
Hrishikesh

Report does not refresh when link to page

I have a report on page 1 with a column link to a report on page 2.
The link sets items on page 2.
If I use the 'Page in this Application' from the column link, the items on page 2 are set and the report is automatically refreshed.
If I use the 'URL' in the column link, the items are set but the report on page 2 is not refreshed. I have more than 3 items to pass via the link so I have to use the URL. The url syntax is correct - if I click a Go button on page 2 the data refreshes fine.
I have the same problem when clicking a tab that I have set to clear the page items - the tab clears the cache on the target page but the data in the report is not refreshed until I click the go button.
The items on page 2 are select lists and text (always submit when enter pressed).
How can I get the report on page 2 to auto refresh without the user having to click the Go button?
Message was edited by: kgamble
kgamble

I can't post the pages (site reasons) but here's the debug.
All the item values are set correctly to what I want but at point 041 - I get the custom "no rows returned error". If I click the refresh button (essentially a submit with go) the date appears.
I am now using the link set up to go to 'Page in Application' with clear cache and 3 item variables set and reset pagination ticked and the request of Go (its the same result without the request and the pagination unticked).
Any ideas?
Thanks
Kathryn
0.00:
0.00: S H O W: application="129" page="8" workspace="" request="Go" session="8392008407576157812"
0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-gb
0.02: alter session set nls_language="ENGLISH"
0.02: alter session set nls_territory="UNITED KINGDOM"
0.02: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to dbtimezone
0.02: NLS: Language=en-gb
0.02: Application 129, Authentication: CUSTOM2, Page Template: 3508132500492586
0.03: ...Supplied session ID can be used
0.03: ...Application session: 8392008407576157812, user=PENTESTER
0.03: ...Determine if user "KGAMBLE" workspace "1728921676563485" can develop application "129" in workspace "1728921676563485"
0.03: Session: Fetch session header information
0.03: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.05: ...Session State: Save "P8_IDR" - saving same value: "Y"
0.05: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.05: ...Session State: Save "P8_STATUS" - saving same value: "Outstanding"
0.05: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.05: ...Session State: Save "P8_SECTION" - saving same value: "P"
0.05: ...Metadata: Fetch page attributes for application 129, page 8
0.05: Fetch session state from database
0.05: Branch point: BEFORE_HEADER
0.05: Fetch application meta data
0.05: Authorization Check: "4732024931692101" User: "PENTESTER" Component: "PAGE"
0.06: Clear cache: request=RP
0.06: ...Resetting pagination for page
0.06: Clear cache: request=8
0.06: ...Clearing Cache for Page 8
0.06: Nulling cache for application "129" page: 8
0.08: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.08: ...Session State: Saved Item "P8_IDR" New Value="Y"
0.08: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.08: ...Session State: Saved Item "P8_STATUS" New Value="Outstanding"
0.08: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.08: ...Session State: Saved Item "P8_SECTION" New Value="P"
0.08: Computation point: BEFORE_HEADER
0.08: Processing point: BEFORE_HEADER
0.09: Show page template header
0.09: Computation point: AFTER_HEADER
0.09: Processing point: AFTER_HEADER
0.11: Authorization Check: "4732329087693375" User: "PENTESTER" Component: "parenttab"
0.13: Authorization Check: "6131220670151932" User: "PENTESTER" Component: "parenttab"
Home New Complaint
Existing Data
Logout |
Complaints Complainants
0.14: Region: Complainant Search
Complainant Search
0.14: Item: P8_SD_SEARCH TEXT_WITH_ENTER_SUBMIT
SD Number
0.16: Item: P8_SURNAME COMBOBOX Complainant -- All -- ARDVARK ARMSTRONG BAKER BLOGGS CHICKEN HARPER HILL JONES PERRY REAPER ROBINSON SHERMAN SMITH T WATSON
0.16: Item: P8_NI_SEARCH TEXT_WITH_ENTER_SUBMIT
NI Number
0.16: Region: criteria_go
0.16: Item: P8_GO BUTTON
0.17: Item: P8_ROWS COMBOBOX Number of complaints per page 10 15 20 30 50 100 200 500 1000 5000
0.17: Region: Complaint Search
Complaint Search
The list of complaints must match ALL of these specified search criteria:
0.19: Item: P8_START PICK_DATE_DD_MON_YYYY
Start
0.19: Item: P8_END PICK_DATE_DD_MON_YYYY
End
0.20: Authorization Check: "4733005669696056" User: "PENTESTER" Component: ""
0.20: Item: P8_TARGET COMBOBOX
Target -- All -- Acknowledgement In Target Acknowledgement Target not Met Acknowledgement Pending Final Response In Target Final Response Target not Met Final Response Pending
0.22: Item: P8_RECUR COMBOBOX
Recurrent? -- All -- YES NO
0.22: Item: P8_PAY_E COMBOBOX Ex Gratia/Interest
Payments -- Select -- YES NO
0.23: Item: P8_IDR COMBOBOX
Type of Complaint -- All -- IDR Other Complaint
0.23: Item: P8_STATUS COMBOBOX Status -- All -- Outstanding Completed 01-Jan-2007 05-Feb-2007 05-Mar-2007 12-Feb-2007 12-Mar-2007 15-Jan-2007 22-Jan-2007 26-Feb-2007 29-Jan-2007
0.23: Computation point: BEFORE_BOX_BODY
0.23: Processing point: BEFORE_BOX_BODY
0.25: Region: Complaints List
Complaints List
0.25: show report
0.28: Authorization Check: "4733005669696056" User: "PENTESTER" Component: "COLUMN"
0.28: determine column headings
0.28: activate sort
0.38: parse query as: GENERAL1
0.38: binding: ":P8_NI_SEARCH"="P8_NI_SEARCH" value=""
0.39: binding: ":P8_SD_SEARCH"="P8_SD_SEARCH" value=""
0.39: binding: ":P8_SURNAME"="P8_SURNAME" value="AA"
0.39: binding: ":P8_START"="P8_START" value=""
0.39: binding: ":P8_END"="P8_END" value=""
0.39: binding: ":P8_SECTION"="P8_SECTION" value="P"
0.39: binding: ":P8_STATUS"="P8_STATUS" value="Outstanding"
0.39: binding: ":P8_TARGET"="P8_TARGET" value=""
0.39: binding: ":P8_IDR"="P8_IDR" value="Y"
0.39: binding: ":P8_RECUR"="P8_RECUR" value="AA"
0.39: binding: ":P8_PAY_E"="P8_PAY_E" value="X"
0.41: print column headings
0.41: rows loop: 15 row(s)
There are no complaints matching the criteria. Please double check all the criteria in the boxes above.
0.42: Computation point: AFTER_BOX_BODY
0.42: Processing point: AFTER_BOX_BODY

I can't get into any mail or internet unless I go thru google. I tried to reload and get error. The FIREFOX error report will not send either.

I tried to reload , received error. Will not send trouble shooting CRASH REPORT. Was working great until crash. Will not accept or I cannot figure out how to have forefox accept updates for ADOBE updates or my virus protection STOP SIGN.

<blockquote>Locking duplicate thread.<br>
Please continue in your previous thread: [[/questions/964962]]
</blockquote>

Plugins that i know are compatible in version 7.0.1 are reporting as not compatible when i try and install then in the same version running inside of VMware.

Greetings ..
I am trying to run Firefox inside of VMware Workstation V8 in Widows 7 and Fusion V4 in Mac OS X 10.7.2.
I first tried to restore a working profile backup of Firefox made with FEBE in windows inside of VMWARE, when I load Firefox more that half of the plugins that were working in Windows and OS X natively, are reporting as not compatible with this (V7.0.1) Firefox and will not update to a working version, as in many cases they are the latest version anyway.
Also it is inconsistent, as i have tried several times to install Firefox and restore the profile and each time it is not all the same plugins that are disabled and reporting as incompatible.
I have also tried to do a clean install of Firefox and going to the website and installing the plugins directly, and while i have not tried all of the disabled plugins, I am unable to install plugins that i am currently using in the same version of Firefox outside of VMware that are working and or can be installed when I am not running Firefox inside of VMware.

If there are problems with updating then best is to download the full version and uninstall the currently installed version and delete the Firefox program folder to remove any leftover files.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Scheduled reports are not working

Hi!
We have a couple of scheduled reports that we have had for a while now.
They have now stopped working. All of them have the following error:
Error: Thread was being aborted.
I have seen people have this problem if the servers load is to high and all reports are running at the same time.
That is not my case. I have tried to scheduled just one report and I get the same error then.
Where can I start the troubleshooting?
Best Regards
Askunge

Look at the SSRS logs located in the folder "C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles" if you leave default path durning installation.
Number "10_50" depends on the version of the SSRS.
Regards,
Ivan
This is what I found. Anyone have a clue what I should do to resolve the problem?
notification!WindowsService_802!79c!04/28/2014-08:00:41:: Error thrown by delivery provider: System.Threading.ThreadAbortException: Thread was being aborted.
   at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
   at Microsoft.ReportingServices.Library.NotificationQueueWorker.HandleNotification(QueueItem item)
library!ReportServer_0-815!1cdc!04/28/2014-09:31:05:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: This operation is not supported on a report server that runs in native mode., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: This operation is not supported on a report server that runs in native mode.
notification!WindowsService_803!1a68!04/28/2014-13:10:03:: Error thrown by delivery provider: System.Threading.ThreadAbortException: Thread was being aborted.
   at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
   at Microsoft.ReportingServices.Library.NotificationQueueWorker.HandleNotification(QueueItem item)
notification!WindowsService_803!79c!04/28/2014-13:00:11:: Error thrown by delivery provider: System.Threading.ThreadAbortException: Thread was being aborted.
   at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
   at Microsoft.ReportingServices.Library.NotificationQueueWorker.HandleNotification(QueueItem item)

Some report fields not displaying when users view reports in a Citrix

Hi All, got a weird one.
We have an app developed in MS Visual Studio 2007 that utilizes .NET crystal reports. Our users access these reports through citrix. Most of teh time, most people can view these reports correctly. SOME of the time, however, certain fields will disappear. The report still runs the same (grouping, ordering, etc) but key information is missing.
After re deploying the reports and / or clearing the user's roaming profile then everything is good for a while, so I know it has something to do with a temp or cached version of the report. is there a way to set .net crystal reports to NOT cache AKA create new every time?
Any assistance would be greatly appreciated!
JOhn.

Hi John,
Yes and Yes.... 14 years...
Multiple Commands and multiple data sources without being linked can cause problems if you also use SQL Expressions. If you try to add more than one data source in the Designer you'll get a pop up warning about server side grouping and SQLExpressions can not be used.
But I don't think this would be the cause. May be a result of the option logically internal to CR but I don't think the data source would be the issue, again you said the info is there just not displayed.
Do they have access to run your app without going through Citrix? Possibly running your app using Remote Desktop. Could rule out if it's a CR issue. I think this may be a GDIPlus problem, it is the dll that renders the page and could be dropping the objects. I know MS has been patching it lately to plug security holes....
One option, if they can, is to use [Modules |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], get then to run it when the reports are working and then again when they are not and see if there are any dll differences...
I have heard of a few other cases with Citrix and I believe it was narrowed down to being a Citrix problem and that was as far as we could take it....
Process Monitor may help but if it's random it's a lot of info to go through to determine the cause.
Maybe logging a case with Citrix might help also....
Thanks again
Don

Why do my text messages on the iphone 5 not send when over 4 or 5 lines, i have to cut them up and send several messages?, why do my text messages on the iphone 5 not send when over 4 or 5 lines, i have to cut them up and send several messages?

When i send text messages i have found that if they are over 4 or 5 lines then my phone does not send them and then i have to cut the message up and send a few messages, not good wwhen you only have a certain amount of free messages.
Thanks in advance for your help

Carriers limit SMS to 160 characters or less. Turning character count on/off will have no affect on this limit, so don't waste your time.

Emails will not send when out of UK

I have two 'normal' email accounts (BT and another provider) and a mobile me account, all set up on my iP3G, and my incoming and outgoing emails seem to work pretty well in the UK, either via WiFi connection or otherwise (3G, Edge etc).
BUT when I travel to Europe (France, Belgium so far) my emails just will not send, whether connected by WiFi or via the local phone carrier. I can receive emails OK, but they won't go out. I have tried the trick of including the outgoing server of my UK carrier (O2) as an additional server for each of the accounts, and putting all the outgoing server details on all the accounts as fallbacks, but still no joy.
I've tried referring to Apple website's UK email server details page, but this seems to have contradictions in it, with server details differing from those given by O2 and BT. Who is right?
This is seriously limiting my 3G's usefulness as a business device, as I'm still effectively isolated when abroad. Is there something like port numbers that I need to change, or have I missed something simple (which I'm quite happy to accept!!)?
Cheers
CB

One account is Yahoo! and you are not allowed to change the config - Apple has it all set up for you (host name not shown just text alias "Yahoo! SMTP Server" though it is something like smtp.yahoo.com or mail.smtp.yahoo.com - I could check this online through Yahoo! mail help but I wouldn't rule out Apple having a separate server with Yahoo!). For what it's worth SSL is OFF, Authentication; Password, and Server Port = 0.
The other account is my personal business exchange account (Fasthost.com). Hostname is exchange.xxx.co.uk, and SSL is ON (Fasthost requires it). I do not see anywhere I could set Authentication password or Server Port. I also have Domain set as EXCHANGE. Presumably because it is EXCHANGE and not SMTP?
It seems that I have a separate config because I am using Exchange. You may be on to something - could be in your mail setup.

Is there any final answer to why emails will not send when away from home IP? Have san diego road runner. emails send fine from home, but do not send when using another IP.

Is there a final answer to why emails do not send from iphones when away from home IP?

This is a common anti-spam technique for ISPs to prevent mail from being sent from anywhere other than your service location. Ask Road Runner if there are any specific settings you can use to circumvent this.

Mail not send when subroutine is call in dynamic actions

Hi Friends,
I have facing a problem in sending a mail through dynamic actions . In this mail is not send to specific user mail-id.
Suggest me . What to be exactly done .
Regards,
Anish

First you have to understand what should be done...
ask your functional consulatant where exactly the Mails need to be retrived For example...
in infotype 0105 subtype '010' generally we have email ids avaialable of the employeee....
may be this helps or not give full specification some one can revert back.
Regards
sas

Why will mail not send when it will receive?

Mail receives correspondence on all accounts, but will not send on the grounds that the server forbids retransmission. However it does work with wegbmail like yahoo and g accessed through safari. How can I resolve this?

Did you check the outgoing mail server setting in each account? Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

[Forum FAQ] Group Policy Preferences Scheduled Tasks Item not working when the option Run whether user is logged on or not is selected

Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun

Scheduled report ( Do not send when no dada found )

Similar Messages

Maybe you are looking for