Scheduled Tasks problem after midnight

I am running CFMX 7.0.2 and am experiencing an issue where
scheduled tasks run correctly until roughly midnight. After
midnight they cease to run. In the logs I can see that the task is
being incorrectly rescheduled for a later time. Instead of being
rescheduled for 1 minute and 1 second later, it will be rescheduled
for much longer - typically about 24 hours later. Any ideas what I
can do to narrow down the cause of this problem?

I've since discovered that this problem does not occur when
the task is scheduled to run at 12 AM. Otherwise, after the task
runs post-midnight, it reschedules itself for its next daily run at
whatever time it was scheduled for.
Is it possible to have a scheduled task that will kick off at
10PM and then run every 1 minute and 1 second later until it is
stopped, even if that means continuing through the next day?

Similar Messages

Coldfusion Scheduled Tasks Problem

Hello--
I am experiencing a strange problem. In a product that my office has created, we make use of Scheduled Tasks in Coldfusion. All of our clients are working just fine with the exception of one. There are several Tasks that all should behave the same way. The task starts, it writes to a log file that it is starting, it processes what it needs to process, it writes to the log file that it is done.
Here is the problem we are having:
Scheduled task is scheduled to run at 3:00am daily. Task will run the first time through without any problems, and sometimes will run a second time without any problems. But, normally, the second time the task starts, the log file we have generated is not updated at all. The timestamp stays the same, so no action has been done to the file. Further, the Task doesn't do any of the process it should. In addition, the JRun process hangs, taking up 99%-100% of CPU and stays that way until the server is restarted. The Coldfusion scheduler.log says that the task has executed. Nothing else is recorded in any of the other Coldfusion logs.
This is a problem that has been reoccurring consistently for the past month with all scheduled tasks. I have spent hours on the phone with the client to debug the issue. All of the Coldfusion settings match between their environment and ours. The server setup is similar to our own server. Server is a VM with 2x3.3GHz processors and 2GB of RAM.
Does anyone have any ideas, suggestions, or help? At this point, I'm at a complete and total loss and any help would be much appreciated...

Well that's all good news, in a way.
OK, so in the test environment stop CF, blitz all the CF and JRun logs, start it, run the script via a browser, run it again. Inspect logs.
I can't believe nothing goes into the logs.
And do you have a <cflog> entry as the very first line of code in the script file? And that log entry never gets made?
If the <cflog> entry never shows up, put an Application.cfm file in the same dir as the script, with a single <cflog> entry in it. Does that <cflog> entry get made?
Adam

Data Flow Task problems after installing SQL Server 2014 SSIS

I can't create any Data Flow Task. Once I create (tested and working) Connection (it doesn't
matter if it is Excel, Flat File or other) and try to use it with a Source Assistant, I get the following messages:
===================================
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
===================================
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)
===================================
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
===================================
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)

See examples here:
http://www.sqlusa.com/bestpractices/ssis-wizard/
What is your data source?
What is your data destination?
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Scheduled Tasks - HTTP 500

I have an application that has been running fine since 2007. I fire 7 scheduled tasks every morning that send emails with status updates. I upgraded to CF9 earlier this year without incident and everything has been fine. All of the sudden, the tasks are not firing as of 11/4. I can run the cfm file from the browser, but the logs show an HTTP 500 error. Nothing has changed on the server or the files. I have verified the file rights and they are as they have always been. when I try to manually run the tasks from the admin, it gives me 7 reasons why it might have failed. I did some searching and could not find any real answers. Anyone else have this issue?

Hi, What update level is CF9? eg CFadmin
Server Settings > Settings Summary
System Information
Server Details
Version 9,0,1,274733
Update Level /D:/ColdFusion9/lib/updates/chf9010001.jar
I ask since this other thread noted scheduled tasks problems for them since applying CHF2 or update level chf9010002.jar -
http://forums.adobe.com/thread/920598
HTH, Carl.

Scheduled Tasks CF 8.01

I have ran into an issue where a scheduled task in CF Admin
will say the task completed successfully but if I login to that
specific address it will error out on that same .cfm page. My
concern is that in the past when my developers have asked me to
schedule a task my way of making sure it works was to see that
"Task completed successfully message" Please help!!!

ClaytonCf8 wrote:
> I have ran into an issue where a scheduled task in CF
Admin will say the task
> completed successfully but if I login to that specific
address it will error
> out on that same .cfm page. My concern is that in the
past when my developers
> have asked me to schedule a task my way of making sure
it works was to see that
> "Task completed successfully message" Please help!!!
>
Unfortunately that 'Task completed successfully message' does
not mean
much about any actual work. All a scheduled task is after all
is a
scheduled HTTP request to some URL. All that successful
message means
is that the URL was requested from a web server and
ColdFusion received
a response, any response with an HTTP status code of 200,
from the web
server.
A ColdFusion error message is a valid http response with a
status code
of 200 as far as a web server is concerned. To know if the
request
template actually did what it was supposed to do one needs to
look out
the output. That is where the Publish 'Save output to a file'
and
'file' controls come in. You can save the output generated by
the
request URL to a location for review after the fact to see if
any error
message was received. Having the scheduled task generate log
data
either on it's own or into one of the ColdFusion logs is
useful as well.

Scheduler problem after 9102 upgrade

Hi all,
Would really appreciate some help diagnosing this one:
After upgrading ffrom 9101 -> 9102 I now have a problem with the scheduler.
I'm running weblogic and now notice that I have three different versions of xlScheduler.jar in:
\xellerate\lib
\xellerate\OIMApplications\WLXellerateFull.ear &
\xellerate\OIMApplications\WLXellerateFull.ear\xlScheduler.war\WEB-INF\lib
with sizes of 122, 176 1nd 182k. (Although this was also the case with 9101 so may not be relevant....)
Scheduling tasks in OIM causes an exception and if I login to the scheduler at http://<server>:7001/xlScheduler/ I get an error and the following log output:
<11-Mar-2010 10:44:42 o'clock GMT> <Error> <HTTP> <BEA-101020> <[ServletContext@13128904[app:WLXellerateFull module:/xlScheduler path:/xlScheduler spec-version:null]] Servlet failed with Exception
java.lang.NullPointerException
at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.getTaskListView(Unknown Source)
at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.showStatus(Unknown Source)
at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
Truncated. see log file for complete stacktrace
Thanks,
Bernie
Edited by: BernieJ on 11-Mar-2010 03:30

Hi
Check sufficient space available in Temp tablespace.
Venkat

Certain scheduled tasks do not run anymore after DST change

Hi everyone,
I noticed a problem on Server 2012 after daylight savings time was set effective last weekend in March. All scheduled tasks that are configured to run weekly on Monday through Friday don't run anymore! Tasks that are configured to run daily are OK. Shall
I really put a wrapper script around the executable to check the weekday myself??? Another solution to work around this bug seems to be to set the start day after DST change day, then the weekly Jobs also run OK again.
Many Greetings
Michael

We have experienced the same issues. Just to put some more information out there (and confirm some points from above):
We run 12 scheduled tasks on 2 servers.
Machines are "Microsoft Windows Server 2012 Standard", ver. 6.2.9200 build 9200, HP ProLiant BL460c Gen8
4 scheduled tasks did fine over the DST switch in March
8 scheduled tasks failed to run
All scheduled tasks that ran were set up with
“Configure For” = “Windows Server 2012”
All scheduled tasks that failed were set up with
“Configure For” = “Windows Vista™, Windows Server™
2008”.
All scheduled tasks, both affected and unaffected, were scheduled as Weekly, Mon-Fri.
Changing the "Configure For" field after the tasks failed to run did NOT fix the problem.
Changing the time of a task after the task failed to run did NOT fix the problem
Changing the "Start" date of a task after it failed to run DID fix the problem.
Given that there are not a whole ton more complaints out on the web about this bug, it must be that the bug does not affect every instance of the scheduler on Windows Server 2012. In other words, it must be only some particular configuration
of Windows Server 2012 that causes this bug, otherwise surely there would be many many more complaints. Can people who are experiencing this bug check and post configuration info so perhaps we can determine a common factor? Thanks.

Server 2012 Scheduled tasks not running after DST

Since the DST change this weekend the weekly scheduled tasks on our 2012 standard server are not running. The schedule show the correct next run time, but the task never runs. The server correctly adjusted for the DST changes (We are in CST in
the US) and if you look in the date time it notified us that the clock was set forward.
Any ideas?

Hi Mark,
Before going further, would you please let me confirm whether only weekly scheduled tasks t run? In other words,
did some daily scheduled tasks run smoothly?
Based on current situation, please create a new weekly
scheduled task and check if encounters the same issue.
If this issue still persists. Please let me confirm if you make scheduled task run some commands or a script,
or others I misunderstand. For an example, if run a script, please directly run it in the Windows Server 2012 Standard and check if there any issue occurred.
Meanwhile, please open Task Scheduler, select this problematic weekly scheduled task, click General tab. Please
check which user account was used to run this task. And please check Run with highest privileges, then check if can solve this issue.
In addition, please check History tab in task Properties. Please pay attention on the time-point when the weekly
scheduled task should be ran, and check if you can find some events at that time-point. It may help us to go further analysis.
By the way, there is a similar thread. Please refer to.
Certain scheduled tasks do not run anymore after DST change
http://social.technet.microsoft.com/Forums/windowsserver/en-US/47483baf-e7af-4bff-9db4-9c3d0ead2b41/certain-scheduled-tasks-do-not-run-anymore-after-dst-change?forum=winserver8gen
Hope this helps.
Best regards,
Justin Gu

Problem creating OIM 11g Custom Schedule task

hi,
i am creating custom schedule task in oim . while importing scheduletask metadata xml getting follwoing error.
Problem invoking WLST - Traceback (innermost last):
File "/app/Oracle/Middleware/Oracle_IDM1/server/bin/weblogicImportMetadata.py", line 21, in ?
File "/app/Oracle/Middleware/oracle_common/common/wlst/mdsWLSTCommands.py", line 268, in importMetadata
File "/app/Oracle/Middleware/oracle_common/common/wlst/mdsWLSTCommands.py", line 727, in executeAppRuntimeMBeanOperation
File "/app/Oracle/Middleware/oracle_common/common/wlst/mdsWLSTCommands.py", line 697, in getMDSAppRuntimeMBean
UserWarning: MDS-91002: MDS Application runtime MBean for "OIMMetadata" is not available. "importMetadata" operation failure.
can any one help me.
Thanks in Advance.

Do the following:
From the oracle home (oracle_idm1) run the command <ORACLE_OIM_HOME>\common\bin\wlst.cmd
Run the connect() command and connect with the weblogic user to the to the oim managed server (port 14000)
Use the following command change your from location to the directory where your files are at. The location should be one folder up from the base "db" directory : importMetadata(application='oim', server='oim_server1', fromLocation='e:/files', applicationVersion='*')
-Kevin

Problem updating Schedule Task Jar

Hi,
I have created a schedule task, uploaded the jar in server/scheduleTask folder.
I was able to run the job without any issues. But after I updated the code, I recreated the the jar and replaced the existing jar.
But I am not able to see my updated code.
I have tried, using upload jar utility also.
It only gets updated after I restart the server. Please provide any suggestions
Thanks

Did you follow the sequence mentioned by Bikash ?
Did you remove old jar from Schedule Task folder ?
Is it clustered environment ? If yes, verify at both the nodes.

CFHTTP and Scheduled Tasks not working after CF8 Upgrade

I have recently upgraded to ColdFusion 8. My scheduled tasks
in the ColdFusion Administrator do not work anymore. I ran them
manually without the ColdFusion Administrator from the server and a
local machine via Internet Explorer 7 and they work. I tried to run
the same scheduled task with the same URL via CFHTTP in a CFM page
and this does not work. The logs are not giving me any error
messages. Has anyone run into this? Is this a bug with CF8 or even
an IIS issue? ColdFusion is on a Windows 2003 SP2 server.
Thanks,
Mike

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML dir=ltr><HEAD><TITLE>The page cannot be displayed</TITLE>
<STYLE id=L_defaultr_1>A:link {
FONT: 8pt/11pt verdana; COLOR: #ff0000
A:visited {
FONT: 8pt/11pt verdana; COLOR: #4e4e4e
</STYLE>
<META content=NOINDEX name=ROBOTS>
<META http-equiv=Content-Type content="text-html; charset=UTF-8">
<META content="MSHTML 5.50.4522.1800" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<TABLE cellSpacing=5 cellPadding=3 width=410>
<TBODY>
<TR>
    <TD vAlign=center align=left width=360>
      <H1 id=L_defaultr_2 style="FONT: 13pt/15pt verdana; COLOR: #000000"><ID id=L_defaultr_3>The page cannot be displayed
</ID></H1></TD></TR>
<TR>
    <TD width=400 colSpan=2><FONT id=L_defaultr_4
      style="FONT: 8pt/11pt verdana; COLOR: #000000"><ID id=L_defaultr_5><B>Explanation: </B>There is a problem with the page you are trying to reach and it cannot be displayed.</ID></FONT></TD></TR>
<TR>
    <TD width=400 colSpan=2><FONT id=L_defaultr_6
      style="FONT: 8pt/11pt verdana; COLOR: #000000">
      <HR color=#c0c0c0 noShade>
      <P id=L_defaultr_7><B>Try the following:</B></P>
      <UL>
        <LI id=L_defaultr_8><B>Refresh page:</B> Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
<LI id=L_defaultr_9><B>Check spelling:</B> Check that you typed the Web page address correctly. The address may have been mistyped.
<LI id=L_defaultr_10><B>Access from a link:</B> If there is a link to the page you are looking for, try accessing the page from that link.
      </UL>
      <HR color=#c0c0c0 noShade>
      <P id=L_defaultr_11>Technical Information (for support personnel)</P>
      <UL>
        <LI id=L_defaultr_12>Error Code: 400 Bad Request. The data is invalid. (13)
        </UL></FONT></TD></TR></TBODY></TABLE></BODY></HTML>

Execute an adapter after a scheduled task

Hi guys,
How do I execute an adapter after scheduled task??
I have a gtc recon trusted, but doesn't has the user login, I need generate this login. I have created an adapter that genate this login, but I don't know what time to run this adapter and I don't know where I need insert the call to this adapter.
Thanks

If it is 9i write an pre-insert event handler instead of adapter. and attach on user data object
for above you have to write a java class which has to extends tcBaseEvent class and then override the implementation method
here you can generate your user login as per your logic and then set the usr_login.
finally build the jar and put this under <IDM_HOME>/server/EventHandler folder

Scheduled Tasks Run Twice After Upgrade To MX7

I've recently upgraded to CFMX7 and now my scheduled tasks
are running twice. I've recreated all of the tasks, rebooted the
server, and made sure that I'm on V 7.0.2 but nothing seems to
help. Is there a solution for this out there?

I've got a couple ideas. I haven't seen this before but this
should be some stuff to try. There's a file in the ColdFusion lib
directory called neo-cron.xml ... this contains an entry for each
scheduled task.
I'd be very careful about making any changes to this file
directly but take a look at it. Are your scheduled tasks
duplicated? If so you can either remove the duplicates manually if
you're feeling brave, or try deleting the scheduled tasks in the cf
admin and then recreate them. Perhaps that would get rid of the
duplicates. If you don't see dupliactes in this file then somehow
ColdFusion's process that runs the scheduled tasks is probably
running once for the old install and once for the new one.
Sorry I don't have any more definitive info but hope this
helps point you in the right direction.
-Matt MacDougall

Problem while running AD org lookup recon scheduled task

Hi,
I'm getting errors thrown when trying to run the AD org lookup recon scheduled task.
using OIM 9.1.0.1 with the latest AD connector on JBoss.
the error log -
2009-10-21 16:00:01,399 DEBUG http://OIMCP.ADCS com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController : connectToAvailableAD:: FINISHED
2009-10-21 16:00:01,399 DEBUG http://OIMCP.ADCS com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController : disconnect:: STARTED
2009-10-21 16:00:01,414 DEBUG http://OIMCP.ADCS com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController : disconnect:: FINISHED
2009-10-21 16:00:01,430 ERROR STDERR Exception in thread "DefaultQuartzScheduler_Worker-7"
2009-10-21 16:00:01,461 ERROR STDERR java.lang.NoClassDefFoundError: com/sun/jndi/ldap/ctl/PagedResultsControl
2009-10-21 16:00:01,461 ERROR STDERR at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.searchResultPageEnum(Unknown Source)
2009-10-21 16:00:01,461 ERROR STDERR at com.thortech.xl.schedule.tasks.ADLookupReconTask.performReconciliation(Unknown Source)
Can any one please help me ?
Thanks

Hi,
Have placed ldapbp.jar in the Third Party Folde of OIM_Home Directory ?
if not just add it and also add in the class path and the try.
regards

Problem running AD Organization Lookup Recon scheduled task

Hey all,
I'm getting errors thrown in JBoss when trying to run the AD org lookup recon scheduled task.
Running OIM 9.1.0.1 with the latest AD connector.
here is the error JBoss is throwing...
2009-10-21 16:00:01,399 DEBUG [OIMCP.ADCS] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController : connectToAvailableAD:: FINISHED
2009-10-21 16:00:01,399 DEBUG [OIMCP.ADCS] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController : disconnect:: STARTED
2009-10-21 16:00:01,414 DEBUG [OIMCP.ADCS] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController : disconnect:: FINISHED
2009-10-21 16:00:01,430 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_Worker-7"
2009-10-21 16:00:01,461 ERROR [STDERR] java.lang.NoClassDefFoundError: com/sun/jndi/ldap/ctl/PagedResultsControl
2009-10-21 16:00:01,461 ERROR [STDERR]      at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.searchResultPageEnum(Unknown Source)
2009-10-21 16:00:01,461 ERROR [STDERR]      at com.thortech.xl.schedule.tasks.ADLookupReconTask.performReconciliation(Unknown Source)
2009-10-21 16:00:01,461 ERROR [STDERR]      at com.thortech.xl.schedule.tasks.ADLookupReconTask.execute(Unknown Source)
2009-10-21 16:00:01,461 ERROR [STDERR]      at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
2009-10-21 16:00:01,477 ERROR [STDERR]      at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
2009-10-21 16:00:01,477 ERROR [STDERR]      at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
2009-10-21 16:00:01,477 ERROR [STDERR]      at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
2009-10-21 16:00:01,477 ERROR [STDERR]      at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
2009-10-21 16:00:01,493 ERROR [STDERR]      at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2009-10-21 16:00:01,493 ERROR [STDERR] Caused by: java.lang.ClassNotFoundException: ADP ClassLoader failed to load: com.sun.jndi.ldap.ctl.PagedResultsControl
2009-10-21 16:00:01,493 ERROR [STDERR]      at com.thortech.xl.dataobj.tcADPClassLoader.findClass(Unknown Source)
2009-10-21 16:00:01,493 ERROR [STDERR]      at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
2009-10-21 16:00:01,508 ERROR [STDERR]      at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
2009-10-21 16:00:01,508 ERROR [STDERR]      at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
2009-10-21 16:00:01,508 ERROR [STDERR]      ... 9 more
I believe I have my AD connector configured properly.
My domain is dc=test-oim,dc=local
Any help would be greatly appreciated.
Thanks in Advance.
-Bryan

You might have to add ldapbp.jar in the class path. either place it in jdk lib or oim ext lib directory.
Hope this helps,
Saggu

Scheduled Tasks problem after midnight

Similar Messages

Maybe you are looking for