Server 2012 Scheduled tasks not running after DST

Since the DST change this weekend the weekly scheduled tasks on our 2012 standard server are not running. The schedule show the correct next run time, but the task never runs. The server correctly adjusted for the DST changes (We are in CST in
the US) and if you look in the date time it notified us that the clock was set forward.
Any ideas?

Hi Mark,
Before going further, would you please let me confirm whether only weekly scheduled tasks t run? In other words,
did some daily scheduled tasks run smoothly?
Based on current situation, please create a new weekly
scheduled task and check if encounters the same issue.
If this issue still persists. Please let me confirm if you make scheduled task run some commands or a script,
or others I misunderstand. For an example, if run a script, please directly run it in the Windows Server 2012 Standard and check if there any issue occurred.
Meanwhile, please open Task Scheduler, select this problematic weekly scheduled task, click General tab. Please
check which user account was used to run this task. And please check Run with highest privileges, then check if can solve this issue.
In addition, please check History tab in task Properties. Please pay attention on the time-point when the weekly
scheduled task should be ran, and check if you can find some events at that time-point. It may help us to go further analysis.
By the way, there is a similar thread. Please refer to.
Certain scheduled tasks do not run anymore after DST change
http://social.technet.microsoft.com/Forums/windowsserver/en-US/47483baf-e7af-4bff-9db4-9c3d0ead2b41/certain-scheduled-tasks-do-not-run-anymore-after-dst-change?forum=winserver8gen
Hope this helps.
Best regards,
Justin Gu

Similar Messages

SCOM 2012 R2 - Tasks not running and Discovery never finishes

Hi all,
I'm having some really weird issues with a new SCOM 2012R2 install. The issue I first noticed was none of the tasks on the right hand side of the SCOM console that run on a monitored server will complete. The window opens and will just have the spinning
green "I'm doing something" circle.
Example: If I run the task list processors on the management server it just sits there like it is running but never returning the result.
Frustrated, I rebuilt the management server and deleted the DB's. And same issue.
Since these tasks are added with the MP's I tired an older Windows Server Operating System MP just to see if the latest one had issues. Unfortunately I still have the same issue and its driving me crazy
Second issue is the Discovery Wizard is also just sitting there when using the advance option to specify the server I want to push the agent too.
I have tried specifying a domain admin account for both the task and the discovery
Checked the SPN's for the management server and SDK account have been registered.
I have checked the SQL broker is enabled and SQL services are using domain accounts
This is the setup:
SCOM 2012R2 running on VMware Virtual Machine with Server 2012R2
SQL Server 2012 SP1 with the Ops DB on one server and the DW on another
Accounts:
OM_MSAA - Domain Admin... Hopefully gets resolved in the future
OM_DAS - Local Admin on the MS
OM_DRA - Local Admin on the SQL Servers
OM_DWWA - Local Admin on MS and SQL Servers
This is an SOS as I have been given a very short deadline and these are the last issues I needed.
I did install a DEV environment running SCOM 2012R2 but on Server 2012 NON R2 and it works with any of the issues mentioned above.
Thanks Mike

Thanks for the reply Stefan.
The issue was with all Tasks. It was running against the Server 2012R2 management server so i guess it was the Windows Server 2012R2 Monitoring MP.
I have found the issue. The OM_DAS "SDK Account" needed the SQL service account to have read permissions.
On the Opsman DB server i was getting these errors:
An exception occurred while enqueueing a message in the target queue. Error: 15404, State: 19. Could not obtain information about Windows NT group/user 'domain\OmSDK', error code 0x5.
This article explains the fix: http://blogs.technet.com/b/lukaszr/archive/2012/10/24/discovery-never-stops-but-tried-everything.aspx
Thanks again for replying
Mike

CFHTTP and Scheduled Tasks not working after CF8 Upgrade

I have recently upgraded to ColdFusion 8. My scheduled tasks
in the ColdFusion Administrator do not work anymore. I ran them
manually without the ColdFusion Administrator from the server and a
local machine via Internet Explorer 7 and they work. I tried to run
the same scheduled task with the same URL via CFHTTP in a CFM page
and this does not work. The logs are not giving me any error
messages. Has anyone run into this? Is this a bug with CF8 or even
an IIS issue? ColdFusion is on a Windows 2003 SP2 server.
Thanks,
Mike

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML dir=ltr><HEAD><TITLE>The page cannot be displayed</TITLE>
<STYLE id=L_defaultr_1>A:link {
FONT: 8pt/11pt verdana; COLOR: #ff0000
A:visited {
FONT: 8pt/11pt verdana; COLOR: #4e4e4e
</STYLE>
<META content=NOINDEX name=ROBOTS>
<META http-equiv=Content-Type content="text-html; charset=UTF-8">
<META content="MSHTML 5.50.4522.1800" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<TABLE cellSpacing=5 cellPadding=3 width=410>
<TBODY>
<TR>
    <TD vAlign=center align=left width=360>
      <H1 id=L_defaultr_2 style="FONT: 13pt/15pt verdana; COLOR: #000000"><ID id=L_defaultr_3>The page cannot be displayed
</ID></H1></TD></TR>
<TR>
    <TD width=400 colSpan=2><FONT id=L_defaultr_4
      style="FONT: 8pt/11pt verdana; COLOR: #000000"><ID id=L_defaultr_5><B>Explanation: </B>There is a problem with the page you are trying to reach and it cannot be displayed.</ID></FONT></TD></TR>
<TR>
    <TD width=400 colSpan=2><FONT id=L_defaultr_6
      style="FONT: 8pt/11pt verdana; COLOR: #000000">
      <HR color=#c0c0c0 noShade>
      <P id=L_defaultr_7><B>Try the following:</B></P>
      <UL>
        <LI id=L_defaultr_8><B>Refresh page:</B> Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
<LI id=L_defaultr_9><B>Check spelling:</B> Check that you typed the Web page address correctly. The address may have been mistyped.
<LI id=L_defaultr_10><B>Access from a link:</B> If there is a link to the page you are looking for, try accessing the page from that link.
      </UL>
      <HR color=#c0c0c0 noShade>
      <P id=L_defaultr_11>Technical Information (for support personnel)</P>
      <UL>
        <LI id=L_defaultr_12>Error Code: 400 Bad Request. The data is invalid. (13)
        </UL></FONT></TD></TR></TBODY></TABLE></BODY></HTML>

KM Scheduler Task not running

Hello All,
I have created a scheduler task for the , for the same I have created a PAR file , have successfully Build the project and deployed , Have configured the time in the Global services . But for some reason I could not see the task being running in the "Component Monitor" (when I select the Services-->scheduler >select one of the CM systems (have two currently)>click on on the CM system ) I could not see my custom task .
As well as When I go to "Service configuration" --> Portal Application , there also I could not see my custome application .
Initially whenever there use to be any error (for example -- CM systems not assigned etc etc ).
Is it something I am missing while deployement , Or has it being deployed properly?
Regards,
Ronniee

Hello Detlev,
Any Inputs on this please.
I have opened a new thread but a different Query
http://forums.sdn.sap.com/thread.jspa?threadID=2155357
Regards,
Ronniee.

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

Windows 2003 server scheduled tasks not work properly. Please help.

I created a couple of windows shell scripting programs. When I call them from command line, it works well. Then I use Task Scheduler to schedule them to be run daily. The strange thing is: If I log into server and open Task Scheduler window. The scheduled tasks will run automatically and execute with result code 0x0. It works well. However, if I just set up Task Scheduler and log out of the server, the scheduled works will not run with result code 0x80. Here is the log info
"programname-parametername.job" (programname.cmd)
Started 1/28/2010 11:20:00 PM
"programname-parametername.job" (programname.cmd)
Finished 1/28/2010 11:20:00 PM
Result: The task completed with an exit code of (80).
I used windows adminstrator account, not system account to schedule the work. I changed scheduled work to be run by my admin account, not by system account. Please advise me where is the problem and how to fix it. Thanks in advance.

Hi Polarisws,
According to your description, I understand that your scheduled task did not run when the user is not logged in the system.
Please go to the services.msc and select the "task Scheduler" service, double-click it and go to "Log On" page, enable the option "allow service to interact with desktop" and test the result.
Regards,
Wilson JiaThis posting is provided "AS IS" with no warranties, and confers no rights.

OIM schedule task not working properly (error - MISFIRE_INSTRUCTION_RE....)

Hello,
we're doing trusted reconciliation from DB and it is implemented through a GTC connector (OIM 10g BP 15).
After we did a sync of OIM from prod to this environment, we're seeing issue using this related trusted recon scheduled job. Here is the error :
DEBUG,24 Jan 2012 15:09:12,321,[XELLERATE.SCHEDULER],Loading Scheduled task class com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,24 Jan 2012 15:09:12,321,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Jan 2012 15:09:12,321,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],Class/Method: QuartzSchedulerImpl/getQuartzTrigger entered.
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],Creating Custom Trigger with StartTime 2012-01-24 with repeat interval of 21600000 secs
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],triggerFreq : CUSTOM
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],triggerImpl : Trigger 'DEFAULT.MYMDB_GTC': triggerClass: 'org.quartz.SimpleTrigger isVolatile: false calendar: 'null' misfireInstruction: 0
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],trigger Misfire instruction : MISFIRE_INSTRUCTION_RESCHEDULE_NEXT_WITH_EXISTING_COUNT
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],Class/Method: QuartzSchedulerImpl/getQuartzTrigger left.
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],MYMDB_GTC trigger is related to DEFAULT.MYMDB_GTC and new job is DEFAULT.MYMDB_GTC
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],Scheduling task : MYMDB_GTC with trigger : Trigger 'DEFAULT.MYMDB_GTC': triggerClass: 'org.quartz.SimpleTrigger isVolatile: false calendar: 'null' misfireInstruction: 5
DEBUG,24 Jan 2012 15:09:12,392,[XELLERATE.SCHEDULER],Loading Scheduled task class com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,24 Jan 2012 15:09:12,392,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Jan 2012 15:09:12,392,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG,24 Jan 2012 15:09:12,407,[XELLERATE.SCHEDULER],Class/Method: QuartzSchedulerImpl/updateXellerateForTrigger entered.
DEBUG,24 Jan 2012 15:09:12,407,[XELLERATE.SCHEDULER],Updating Trigger Details: lastStartTime : 2012-01-24 lastStopTime : Tue Jan 24 15:09:12 PST 2012 nextStartTime : 2012-01-24
DEBUG,24 Jan 2012 15:09:12,411,[XELLERATE.SCHEDULER],LefMethodDebug
DEBUG,24 Jan 2012 15:09:12,411,[XELLERATE.SCHEDULER],Class/Method: QuartzSchedulerImpl/updateScheduledTask left.
DEBUG,24 Jan 2012 15:09:14,035,[XELLERATE.SCHEDULER],Loading Scheduled task class com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,24 Jan 2012 15:09:14,035,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Jan 2012 15:09:14,035,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG,24 Jan 2012 15:09:14,066,[XELLERATE.SCHEDULER],Loading Scheduled task class com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,24 Jan 2012 15:09:14,066,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Jan 2012 15:09:14,066,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
INFO,24 Jan 2012 15:09:14,093,[XELLERATE.SERVER],Quartz Executing Scheduled task : MYMDB_GTC
DEBUG,24 Jan 2012 15:09:14,099,[XELLERATE.SCHEDULER],Class/Method: SchedulerUtil/eventPreInsert entered.
DEBUG,24 Jan 2012 15:09:14,099,[XELLERATE.SCHEDULER],Class/Method: SchedulerUtil/getSchedulerInstanc left.
DEBUG,24 Jan 2012 15:09:14,175,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Jan 2012 15:09:14,175,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
Any idea what could be wrong here?
Thanks,

Hello,
I tried "Edit" the GTC connector and "SAVE" the connector back without doing any editing. I hope that will not cause any difference in the deployed corresponding GTC schedule task which used to work earlier.
Anyways, i also checked the trusted source database and populated some new values in there and tried reconciling again (incremental reconciliation configured). Surprisingly i see some new error in the logs. Is this because of the unnecessary "Edit" operation i performed ?
==========================================================================================================
ERROR,31 Jan 2012 16:22:49,269,[XELLERATE.GC.FRAMEWORKRECONCILIATION],Reconciliation Encountered error:
java.lang.IllegalArgumentException: Cannot format given Object as a Date
at java.text.DateFormat.format(DateFormat.java:281)
at java.text.Format.format(Format.java:140)
at com.thortech.xl.gc.impl.common.DBFacade.getStringFromSQLObject(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.retrieveRecord(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getRecord(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getTargetRecord(Unknown Source)
at com.thortech.xl.gc.impl.recon.DBReconTransportProvider.getFirstPage(Unknown Source)
at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
DEBUG,31 Jan 2012 16:22:49,270,[XELLERATE.SCHEDULER.TASK],Class/Method: SchedulerBaseTask/setResult entered.
DEBUG,31 Jan 2012 16:22:49,270,[XELLERATE.SCHEDULER.TASK],Class/Method: SchedulerBaseTask/setResult left.
WARN,31 Jan 2012 16:22:49,270,[XELLERATE.GC.FRAMEWORKRECONCILIATION],Though Reconciliation Scheduled task has encountered an error, Reconciliation Transport providers have been "ended" smoothly. Any provider operation that occurs during that "end" or "clean-up" phase would have been executed e.g. Data archival. In case you want that data to be a part of next Reconciliation execution, restore it from Staging. Provider logs must be containing details about storage entities that would have been archived
DEBUG,31 Jan 2012 16:22:49,270,[XELLERATE.SCHEDULER.TASK],Class/Method: SchedulerBaseTask/run left.
========================================================================================

Scheduled Tasks wont run

I had recently upgarded to CF8 from CF7.
After the upgrade non of my Scheduled Tasks are running.
Even when i trigger the tasks manually from CFAdmin I get the response "This scheduled task was completed successfully."
But nothing really runs. My application is using Integrated Windows Authentication and the schedulled tasks were running fine with CF7.
Now when i switch off the Windows authentication, the scheduled tasks are working fine.
Could you please tell me why my Scheduled Tasks are not running when i turn on Windows authenticaton, where as it was working perfectly with CF7.

ColdFusion schedule tasks CAN NOT run under windows integrated authentication. ColdFusion is not a windows product, it does not pass the NTML headers with requests. You have to turn off windows integrated authentication for any resource you would like to run as a schedule task. Helpfully, you can set that permssion to individual files and|or folders so you do not need to turn it off for the entire site.
I don't know why this would change after an upgrade, unless you built a new CF8 server with a newly built IIS as well.

Oracle automatic statistics optimizer job is not running after full import

Hi All,
I did a full import in our QA database, import was successful, however GATHER_STATS_JOB is not running after sep 18 2010 though its enable and scheduled, i did query last_analyzed table to check and its confirmed that it didnt ran after sep18,2010.
Please refer below for the output
OWNER JOB_NAME ENABL STATE START_DATE END_DATE LAST_START_DATE NEXT_RUN_D
SYS GATHER_STATS_JOB TRUE SCHEDULED 18-09-2010 06:00:02
Oracle defined automatic optimizer statistics collection job
=======
SQL> select OWNER,JOB_NAME,STATUS,REQ_START_DATE,
to_char(ACTUAL_START_DATE, 'dd-mm-yyyy HH24:MI:SS') ACTUAL_START_DATE,RUN_DURATION
from dba_scheduler_job_run_details where
job_name='GATHER_STATS_JOB' order by ACTUAL_START_DATE asc; 2 3 4
OWNER JOB_NAME STATUS REQ_START_DATE ACTUAL_START_DATE
RUN_DURATION
SYS GATHER_STATS_JOB SUCCEEDED 16-09-2010 22:00:00
+000 00:00:22
SYS GATHER_STATS_JOB SUCCEEDED 17-09-2010 22:00:02
+000 00:00:18
SYS GATHER_STATS_JOB SUCCEEDED 18-09-2010 06:00:02
+000 00:00:26
What could be the reason for GATHER_STATS_JOB job not running although its set to auto
SQL> select dbms_stats.get_param('AUTOSTATS_TARGET') from dual;
DBMS_STATS.GET_PARAM('AUTOSTATS_TARGET')
AUTO
Does anybody has this kind of experience, please share
Apprecitate your responses
Regards
srh

?So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not run, but i see tables are updated still the job is not running. I did >query dba_scheduler_jobs and the state of the job is true and scheduled. Please see my previous post on the output
Am i missing anything here, do i look for some parameters settings
So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not run,GATHER_STATS_JOB will run and if there are any table in which there's a 10 percent change in data, it will gather statistics on that table. If no table data have changes less than 10 percent, it will not gather statistics.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/stats.htm#i41282
Hope this helps.
-Anantha

Apache Web Server Listener (PLSQL) is not running!!!

adapcctl erroring out with message "Apache Web Server Listener (PLSQL) is not running." after a simple apache bounce
EBS 11.5.10.2
[applmgr@naoes04 naprod]$ adapcctl.sh start
adapcctl.sh version 115.55
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
adapcctl.sh: exiting with status 0
[applmgr@naoes04 naprod]$ adapcctl.sh status
adapcctl.sh version 115.55
Apache Web Server Listener :httpd ( pid 19447 ) is running.
Apache Web Server Listener (PLSQL) is not running.
adapcctl.sh: exiting with status 1

1. Check adapcctl.sh log file
2. It was working before? If yes what changed?
3. Did you change apps password?1. No noticeable entry in adapcctl log except this
+05/24/12-06:46:02 :: adapcctl.sh version 115.55+
+05/24/12-06:46:02 :: Apache Web Server Listener :httpd ( pid 30453 ) is running.+
+05/24/12-06:46:02 :: Apache Web Server Listener (PLSQL) is not running.+
+05/24/12-06:46:02 :: adapcctl.sh: exiting with status 1+
+================================================================================+
+05/24/12-06:46:17 :: adapcctl.sh version 115.55+
+05/24/12-06:46:17 :: Apache Web Server Listener :httpd ( pid 30453 ) is running.+
+05/24/12-06:46:17 :: Apache Web Server Listener (PLSQL) is not running.+
+05/24/12-06:46:17 :: adapcctl.sh: exiting with status 1+
+===============================================================================+
2. It was working before, nothing was changed
3. Nope, I did not change the apps password
I have already tried those steps
Apache Web Server Listener (PLSQL) is not running.
adapcctl.sh: exiting with status 1
Edited by: 928983 on 24-May-2012 05:23

Manages Exchange server health Service is NOT starting after installing EDGE role using Exchange2013 SP1+CU5 setup

I used Exchange 2013 SP1+CU5 to install Edge role on Windows server 2012 R2 workgroup machine
then after installation the service "Exchange server health Service" was not starting automatically or manually with the following error "Error 1075: The dependency service does not exist or has been marked for deletion"
and in the Event Viewer I have this error:
Event Id: 7003
The Microsoft Exchange Health Manager service depends on the following service: MSExchangeADTopology. This service might not be installed.
please advice

The Exchange 2013 Edge Role has a reduced set of services compare to a CAS or MBX server role:
Active Directory Web Services
Microsoft Exchange ADAM
Microsoft Exchange Anti-spam Update
Microsoft Exchange Diagnostics
Microsoft Exchange Credential Service
Microsoft Exchange Health Manager
Microsoft Exchange Service Host
Microsoft Exchange Transport
Microsoft Exchange Transport Log Search
The above one was from Exchange 2013 Sp1. Not sure whether Microsoft Exchange Health Manager service has been replaced from CU5.
Just restart the edge server once again and ensure that you are able to see this service again in services console.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

WSUS 3.0 SP2 will not run after installing update 2720211

http://support.microsoft.com/kb/2720211
The update was installed and server rebooted. Now the WSUS console on Server 2008 SP2 will not run. "Error: Connection Error. An error occurred trying to connect to WSUS server."
The update service and IIS are both running.
When checking for updates from clients, they show a message saying their update software needs to be upgraded, but they fail updating.
I was going to uninstall the update, but there is no option to uninstall the update from the WSUS server.
What are options to fix this?

This page helped alot. Let me recap for others on the interwebs.
Cause:
- Applied KB2720211 to a WSUS 3.0 SP2 server thats running on Windows 2008 64 bit server with local SQL db.
What happened:
- I could no longer sync my WSUS server with the interwebs.
- clients could still connect to WSUS and I could still open the WSUS console.
- Uninstalled WSUS, left DB and downloads and reinstalled WSUS in attempt to fix broken syncing.
- Clients could now no longer sync with WSUS server. (They got Windows Update error code 800B0001).
Solution:
- Googled, found this page.
- Followed just these last few steps that Chucker2 posted.
Extract necessary files from 2720211 installer
Download the KB2720211 installer for your architecture from Microsoft (http://support.microsoft.com/kb/2720211)
Extract WUSSetup.msp from the installer by running the installer with the /extract parameter (example: "WSUS-KB2720211-x64.exe /extract")
With 7-zip, open WUSSetup.msp and extract "PCW_CAB_SUS".
With 7-zip, open "PCW_CAB_SUS" and extract "DbCert", "DbCertDll", and "DbCertSql".
Rename those files to "WSUSSignDb.cer", "WSUSSignDb.dll", and "WSUSSignDb.sql", respectively.
On your WSUS server, navigate to "C:\Windows\SYSMSI\SSEE\MSSQL.2005\MSSQL\SchemaSig" and copy the extracted "WSUSSignDb.cer" and "WSUSSignDb.dll" to it. Make a backup copy of the two existing versions, just in case.
On your WSUS server, navigate to "C:\Program Files\Update Services\Database" and copy the extracted "WSUSSignDb.sql" to it. Make a backup copy of any existing versions of the file.
Reinstalled 2720211
PROBLEM FIXED AND CLIENTS COULD ALL SYNCH AGAIN.
Thanks Chucker 2.
ps. Susan Bradley stop polluting every WSUS post on the interwebs with your constant links to WSUS KB2720211 : Common issues
encountered and how to fix them
this is the best solution. after reboot the problem is solved .
kailash

Premier elements 12 will not run after re-install

Premier elements 12 will not run after re-install - it is legal and registered with adobe under my ID. WTF! The reason I re-installed it was because it could not find the internet - which is working. And premier 12 was working for a while then quit - that is why as a last ditch effort - i re-installed it. Any ideas?

scottg
Please review the following for possible solutions to your Premiere Elements 12 issue.
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
Looking forward to learning of your results when your schedule permits.
Thank you.
ATR

WorkerRoles not running after 1/1

Hi! We have a problem with WorkerRoles not running after new years eve. Everything looks fine in the management portal (status running as usual), but no work is being executed. The same code and database runs fine in the local emulator.
Has anyone else encountered this issue or have an idea of where to look for a solution?

Thanks for your reply!
There looks to be some logging (not my code, and the developer is unreachable atm), but all I can find are the .tsf-files when I remote into the server (tried the table2csv tool, but it doesn't output anything, including an error). I should have mentioned
I already tried checking the event log, but there doesn't appear to be anything of relevance in there.
If you have any other idea, that would be great! I haven't used Azure much, and this is my first issue that is not possible to replicate with the emulator..

Schedule tasks to run on wake up?

Is it possible to schedule tasks to run when a Mac wakes up (preferably Terminal/UNIX)?
I want to run a script when I open my laptop. Is that possible without installing further software?

You could use System Preferences -> Energy Saver -> Schedule to wake up the Mac (or at least try), then if you can have your tasks run in the background, you might be able to either use a repeating Calendar entry that runs an app, Applescript, or Automator app, or use a launchd.plist (launchd is non-trivial, but effective).
The key is to have tasks that do not need to be actually logged in at the time. That is to say, they do not need a GUI up and running.
Not sure that Dropbox works without being logged in, but there may be other ways to sync things between Macs without using Dropbox. Maybe something like bittorrentsync (I've only heard about it, but have not played with it).
As Chris CA suggests, so not shutdown your Macs, but maybe just sleep them with your account already logged in. Then when the scheduler wakes them you are already logged in. Then when the tasks you need to run complete, you can let the normal idle system sleep interval put them back to sleep (be sure to set the sleep interval to a long enough period to allow your tasks to complete).

Server 2012 Scheduled tasks not running after DST

Similar Messages

Maybe you are looking for