Schedules show different status on 2 cluster machines

Hello,
I have the following problem:
I've set up a cluster in BOXIR2 SP4, with 2 machines.
Let's say I schedule a report to run each monday. It'll show up on both machines in infoview as a recurring schedule.
When machine 1 picks up the schedule it gets status 'running' (active), but on machine 2 it still has status 'recurring'. And vice versa. It seems that only after some time the schedules get the same status.
Is there some kind of interval parameter which can be adjusted? It is very annoying if both machines don't show the same status.
Kind regards.

Hi,
there are some parameters for syncing the Time for all CMS`s available in the Cluster.
1. Check the "Command Line Parameters" section in the admin guide.
2. Check SAP Note -  1370324
Regards
-Seb.

Similar Messages

  • MRS (Multi Resource Scheduling) - Show operation status in Planning Board

    Because the current MRS thread is some long and complicated I chose to move this question into a seperate thread:
    Initial question:
    Like many companies, it is not unusual at my customer for their Planners to create orders with multiple operations, particularly since many orders require different crafts to perform the work. When the Planning Board is launched and Planners lok at work scheduled for the past week they want to be able to see at a glance which operations have been completed and which operations, perhaps from the same order, have not and may need to be rescheduled. Their preference is to select "final confirmation" when using transaction IW41 and thereby set the operation system status to CNF when the work on an operation has been completed. They then want to somehow use this CNF operation status to drive something visual in the graphical Demand layout display and Resource layout display to enable the Planner to see at a glance that the operation has been completed. I've tried several approaches with configuration of abstract statuses and the user interface profile without success. My customer's interest in being able to see the completion status of an operation in the MRS Planning Board makes a lot of sense to me. I'm hoping someone can help me with a technique for modifying the Planning Board so that it displays the completion status of an operation in a visual way.
    Response from Varun Verma:
    Hi Mark,
    The problem at your customers end is nothing new.
    What you can do ( many other customers have done it in similar way ) is:
    1) you integrate the status CNF into MRS.
    Check the customizing: Basic Settings -> Assign ERP Objects -> Status
    2) configure in MRS that for status CNF, the assignments and demands (only in item work list or Hotlist) is colored to GREEN (or any other color)
    Check customizing: Set Up Scheduler Workplace -> Workplace Profiles -> Define User Interface Profiles
    Thus the users will know visually, that the green colored assignments are already completed.
    By the way, in your work list you can also filter the demands based on their status
    Regards
    Varun.
    Followup question:
    Varun,
    Thanks for the response.  I thought I had tried this but perhaps it's because in the UI profile I had not entered something in both the status groups for assignments and the status groups for demands.  I have a bit more testing to do but it appears that the demand status now gets updated from the operation status of PCNF (linked to abstract status WORK_START) and CNF (linked to abstract status WORK_STOP).  I also get a red bar (C4) for PCNF and a green bar (C1) for CNF.  Do you have a better status group I should be using in place of C1 and C4?  Status groups C1 and C4 give me a bar but it doesn't look like the demand bar with a outline and alphanumeric description of the demand, it's just a colored bar.
    I know the work list can be filtered based on their MRS "planning" status, however, it doesn't appear to permit filtering by the status of the operation unless I add the operation status as an additional field in the worklist.  Is there something I'm missing here?  And even if it did, my customer wants to be able to see the CNF status indication in the Demand layout and schedule using the work centers so the worklist is not being shown like it is in the Resource layout.
    Mark
    Edited by: Mark Scott on Aug 10, 2009 3:35 PM

    Hi Mark,
    Well I assumed that you have confirmations integration active !! But I guess not because you say that the status is not integrated always.
    What you need to do:
    1) I assume you have SP05 or later.
    2) Implement the user exit: CONFPM05. In the implementation of this exit you need to call FM: /MRSS/RSG_PM_ORDER_CONFIRM
    3) Go to customizing: Basic Settings --> Assign ERP Objects --> Status
      -- Here, define an abstract status (MRS Status) for confirmed and partially confirmed
      -- map it to R3 status CNF and PCNF.
    After this, whenever you enter confirmation for PM order from transaction IW41, the status will be integrated.
    Now you can use the MRS statuses defined in step 3 to configure the colors.
    Implementing the user exit CONFPM05 might require some technical input. But it is easy. Just a few double clicks and copy paste.
    Contact an ABAP developer for the same.
    This should solve your issue.
    Regards
    Varun

  • SCCM 2012 Client was removed but SCCM console still showing the status as "Yes"

    Hi,
    In a VM, SCCM 2012 client agent was removed and the VM was reverted back to a clean machine. SCCM console still shows the status as "Yes" even after the client agent was removed. Heartbeat Discovery is set to run every 1 hour.
    Please guide on this.
    Regards, Lorin Davis

    It's kind like a person dying (sorry to be a bit morbid) -- how does the phone company know the person died? The dead person certainly can't tell them and the phone company doesn't query every person it services and ask them "are you alive?"
    Thus, someone else must notify them of the person's passing. This is no different than a client agent "dying" in ConfigMgr. A ConfigMgr site never initiates communication with clients and thus something else needs to tell the site that the client
    agent is dead. You! Or, an automated process (as Torsten mentioned) that goes through automatically marks a client as "dead" that hasn't been heard from in x number of days.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Dba_registry table showing different versions.

    Hi DBA's
    my database version is 9.2.0.6, but following are showing different versions, is there any cause to the database?
    Oracle XDK for Java                      9.2.0.8.0       VALID
    Oracle interMedia                        9.2.0.1.0       LOADED
    SQL> col comp_name for a40
    col version for a15
    select comp_name, version, status FROM dba_registry;
    SQL> SQL>
    COMP_NAME VERSION STATUS
    Oracle9i Catalog Views 9.2.0.6.0 VALID
    Oracle9i Packages and Types 9.2.0.6.0 VALID
    Oracle9i Real Application Clusters 9.2.0.6.0 INVALID
    JServer JAVA Virtual Machine 9.2.0.6.0 VALID
    Oracle XDK for Java                      9.2.0.8.0       VALID
    Oracle9i Java Packages 9.2.0.6.0 VALID
    Oracle interMedia                        9.2.0.1.0       LOADED
    Spatial 9.2.0.6.0 VALID
    Oracle Text 9.2.0.6.0 VALID
    OLAP Analytic Workspace 9.2.0.6.0 LOADED
    Oracle OLAP API 9.2.0.6.0 LOADED
    COMP_NAME VERSION STATUS
    OLAP Catalog 9.2.0.6.0 VALID
    12 rows selected.
    Thanks,
    SG

    SG,
    You may also review the following note:
    Note: 292017.1 - Wrong Version of Some RDBMS Components in DBA_REGISTRY After Creation of DB
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=292017.1
    Regards,
    Hussein

  • BLF stopped showing activity status

    I have two different locations having this same issue. The BLF key will stop showing the status of the other but, after a reset of the effected device it works.... only to have the problem roll to another phone in that same call pick up group. The BLFs work as speed dials. Only the flashing to show status has stopped. If the user unplugs the phone or if we perform a RESET of the phone, the flashing returns. It continues to roll through the entire group.
    What registration is upon the reboot/restart of these devices? How do I isolate this problem?
    [CUCM8.6.2.23075-1]

    8000 phones means that there is probably more than a CUCM. CUPS, a switchboard, shared lines, Lync or Jabber,... all subscribe to the status. A short network outage or a failover of many phones can cause problems. We observed this many times in the past years. Sometimes lines are busy but no one is using the line, after a reset everything works normal an a few days another line is affected. A phone is ringing and as soon as you lift the receiver the other party is put on hold. ...
    A restart of all CTI Manager services solved the problem, otherwise reboot the cluster.

  • The Status of the Virtual Machine Is "Error"

    hi,
    i using Oracle VM 2.1.2 version
    while starting the machine,it shows the status as Error
    when i checked the log for the same,log shows the below error
    failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/OVS/running_pool/25_srv2vm2_oel47/vm.cfg']=>Error: Acquire running lock failed: 256 > StackTrace: File "/opt/ovs-agent-2.2/OVSXXenVM.py", line 57, in xen_start_vm run_cmd(args=cmd) File "/opt/ovs-agent-2.2/OVSCommons.py", line 98, in run_cmd raise Exception('%s=>%s' % (cmdlist, p.childerr.read())) > StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 86, in start_vm raise e
    please help me..
    thanks in advance...

    Hi, try to open the "Server Pool" menu, select your server pool, and click the "restore" button. This will reset the agents on all the pysical machines.
    Then, you can try again to start your VM guest.
    HTH

  • Workflow attached to content type shows the status as 'Starting'

    Hi,
    I have developed a workflow to distribute documents from Drop Off library to different SharePoint libraries based on the content type that the document uploaded to.
    The drop off library has been configured incoming mail settings hence the documents would be on boarded to drop off library through e-mails. In this scenario, my workflow should be triggered when the document is on boarded through email.
    Another scenario, the user can upload the document to different content type manually and updates the respective meta data values. This scenario, my workflow should be triggered when the item updated.
    So, I have configured my workflow should run on the content types and trigger when item is created through e-mail and item is updated by manual.
    The document on boarded through e-mails are working fine as soon as the item is created.
    Issue:
    The workflow associated on a content type which needs to be triggered on item created is triggering as soon as the user uploads a document manually and shows the status as 'Starting'.
    The workflow associated on a content type which needs to be triggered on item modified is triggering as soon as the user updating meta data values after document is uploaded. Hence, throwing an error
    'cannot open a file from drop off' library exception when I try to read file using C# code as file stream bytes.
    Configuration:
    1. The content types are having mandatory fields which has a default values set.
    2. The document version settings are set as check out the document when editing the properties.
    Please help me to resolve this bug and let me know if you need more details.
    Also, let me know how can we cancel the workflow if it is in 'starting' mode.
    The workflow should run the document is onboardedwhen an item is created and

    Hi,
    According to your description, my understanding is that you want to get data from content type in JSlink.
    I suggest you can get the content type data in JSLink using JavaScript Client Object Model.
    Here are some derailed code demos for your reference:
    http://sharepoint.aspcode.net/view/635399286724222582163436/sharepoint-how-to-get-field-value-using-jsom-jslink-without-async-call
    http://sharepoint.stackexchange.com/questions/93777/how-to-get-contenttype-name-in-clientsidejavascript-jquery-csom-etc-in-editf
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • Oracle SSO not showing up status after rebooting the 10gapplication server

    Hi all,
    I installed 10g R2 10.1.2.0.2 application server RHEL AS 4.0 2.6.9-11 kernel.
    After the successful installation IM and MR and MT (BI). All the components in the MT and infrastructure was showing up status. After rebooting the machine i executed the following commands
    For Infrastructure
    1.     To make the metadata repository up and running
    Log in as an oracle user
    #cd /home/oraASInfra/bin
    #export ORACLE_HOME=/home/oraASInfra
    #export ORACLE_SID=mamcinfr
    #./lsnrctl start
    #./sqlplus
    Enter userame: sys as sysdba
    Sql>startup
    Sql>Exit
    2.     To start the other components of the infrastructure
    Log in as an oracle user
    #cd /home/oraASInfra/opmn/bin
    #./opmnctl startall
    3.     To start the iasconsole
    #cd /home/oraASInfra/bin
    #./emctl start iasconsole
    For Middle tier
    1.     To start the middle tier components
    Log in as an oracle user
    #cd /home/oraASmt/opmn/bin
    #./opmnctl startall
    2.     To start the iasconsole
    #./emctl start iasconsole
    In the MT all the components is showing up status
    In the Infrastructure except oracle sso OID , HTTP server and OC4J security is showing up status.
    There is no any port conflicts between the infrastructure and MT.
    Is there any post installation tasks has to be done after the installation?
    please help me to sort out the issue.
    thanks,
    C Saju

    1. After RapidWiz with 11.5.10.2 CDs, do we need to
    do any post installation step to make the browser
    load Oracle Forms. Do we need to create our own
    certificate using envshell.cmd and then adjkey. And,
    apply that to Jinitiator using adjbuild.sh and
    regenerate JAR files using ADADMIN Jar ( I am so far
    assuming that these steps are not necessary after for
    rapidwiz install of 11.5.10.2 )Your assumption is right. You do not have to do anything
    2. Do I need to apply the Oracle App 11i 11.5.10.2
    Maintenance Pack after installing using RapidWiz from
    the main set of CDs labeled as 11.5.10.2No
    3. Should I try by installing manually latest
    Jinitiator 1.3.1.21 or 1.3.1.25You do not have to upgrade your jinitiator version unless you want to go with the latest one.
    Since (adsign.txt, appltop.cer, and identitydb.obj) do not exist in your system, you just need to initialize the java certificate as follows:
    adjkey -initialize
    This will create the following files:
    - adsign.txt directory $APPL_TOP/admin
    - appltop.cer direcotry $APPL_TOP/admin
    - identitydb.obj directory $HOME of the user that launch adjkey
    Metalink note: 365735.1 should be helpful.
    Good luck

  • PO showing wrong status

    Hi :  I have setup approval for PO. I have one PO in the worklist, it shows PO awaiting approval and whenni go and check detials in PO for the Approval view on the Header Data tab, it says No Approval Required. which is correct as per our setting. could you please tell me why I am getting different  statuses and help me in resloving it.
    Thanks
    RK

    Hi RK,
    Please read this link.
    Re: PO Status is Awaiting Approval when no Approval Required
    thanks,
    Raju

  • Message Status as "Scheduled" and Queue Status "Queue Stopped".

    Hi friends,
    My scenario is from Peoplesoft -> XI -> BI
    Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
    How to proceed further ? How can I start that queue ?
    Thanks ain advance,
    Neena John

    Hi Neena,
    Go to SXMB_ADM -> Manage Queues -> Register Queues
    More on queues
    XI :  How to Re-Process failed XI Messages Automatically
    Run the report RSXMB_REGISTER_QUEUES and register the queues
    Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
    Refer this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
    Regards,
    Vinod.

  • Tidal Enterprise Scheduler - Get Job status using c#

    Is it possible to get the list of jobs scheduled and their status in Tidal Enterprise scheduler using a programming language like C# ?

    API depends on your version and you need to have the client installed from Server/DEsktop initiating the API
    the PDF document should have been included on you CD2 called Command Line Program Guide
    I will use 5.3.1 as an example:
    open a command prompt
    Browse to C:\Program Files (x86)\TIDAL\Scheduler\client
    type in set alias=DEV > example=DEV otherwise it defaults to Admiral
    type in SACMD
    type  HOST I always type in HOST so I can verify what master I am running against (nio need if only one connection)
    type in jobmon with your options I included below from doc
    [-d date] +display_options [filtering_options] [-b]
    It may be of limited use in 5.3.1 because to isolate you need to know Job ID or Alias or some other filter critiera... Job ID is in database jobmst.dbo.jobmst_id which is the unique identified and can be different from alias... depending on your  requirements (dashboard?) and how you have organized your jobs a SQL query would be the better option. 
    DISPLAY
    r
    Job rule ID
    i
    Job run ID
    p
    Parent job group ID
    j
    Job type (job or job group)
    c
    Occurrence number
    o
    Job or job group owner
    u
    Runtime user
    h
    Agent The Agent the job runs on
    z
    Scheduled vs. unscheduled job
    t
    Job start time
    s
    Job status
    v
    Job duration
    n
    Job name
    a
    Job alias
    q
    Queue
    x
    Exit code
    FILTER
    -r
    rule_id Job rule ID
    -p
    group_id Parent job group ID
    -j
    type Job type. You can choose: job group: group, or 1 job: Job, or 2
    -o
    owner Job or job group owner
    -u
    run_user Runtime user
    -h
    agent The Agent name the job runs on
    -s
    job Status ( Completed Abnormally=103, Normal=101)
    -a
    alias Job alias
    -x
    exit_code Exit code
    -b
    Suppresses the header information

  • MAM Sync shows the Status O-Waiting

    Hello all,
    I'm trying to do the sync steps in my MI Client (using MAM), but when i try to do this, the SyncBOs in MEREP_MON are always showing the Status O-Waiting, and the data is not arriving to Client. I don't receive any error message in client.
    I've tried to run MEREP_RDB_T01_RESET in SE37 and replicate the SyncBOs in MEREP_PD and MEREP_EX_REPLIC. I've tried to reinstall MI Client and generate a new device ID. Nothing is happen.
    By the way, I've tried schedule of MI Jobs again and generate the roles for MI In PFCG. Nothing.
    I getting this problem after a System restart on the middleware. Before this, the system was working good.
    The system is: SAP Netweaver 2004s (WebAS 7.0) with Mobile Infrasctruture. MAM 2.5.  NW2004s is running in with Support Package 10 for Abap and Java stacks.
    Anybody have an Idea?
    Thanks a lot.
    Carlos

    Hi Carlos,
    First, check the whether you have enabled all the syncBOs in merep_pd. That is the culprit most number of times.
    Check if the data has come to the MEREP_207 table, which the RDB for the T01 syncBOs. If you have data in the table, then your replication is working fine.
    Kindly do the above two steps, and let me know abt their results. Also, tell me what is your MI client SP level.
    Regards,
    Rahul

  • Disk Utility shows different available space than Finder?

    I just reinstalled Lion from a fresh harddrive. I did not use the migration asistance to pull files over to the new drive, I selested files and dragged them over, So not to fill the drive with things I dont need....
    So I "Get info" on the main harddrive it shows
    Which is crazy! Then I use Disk Invintory and it shows:
    and Disk Untility shows:
    Why the difference? Simple question and How do I free up space?
    I'm also trying to back up using time capsule*

    JimN wrote:
    Well, I'm seeing the same thing so before I post yet another note to this group and get no response, I'll at least throw in my .02 cents here as well.  Not sure you've found the solution but I've recently started seeing the same thing.
    If you use Time Machine, most likely, the difference is your Local Snapshots.  Those are kept on the OSX drive on laptops, so you can have access to them when your normal external backups aren't available.
    They'll be deleted automatically if your disk gets over 80% full, so aren't shown by the Finder, so you won't worry about the space they take up.  Plus, they're "thinned" to one per day after 24 hours, then deleted after a week.
    So they really don't cause a problem, other than showing the different amounts.
    See Time Machine - Frequently Asked Question #30 for the gory details.
    If that doesn't fully explain the space problem, see Where did my Disk Space go?
    To top this off, what else I'm finding is that there are a number of anomalies I'm encountering that seem mysterious such as Mail no longer functioning correctly, apps crashing, computer restarts randomly.
    It all started back in April when my HD crashed and I had to have Apple replace it.  Since then, I've gone through 3 "Logic Boards" and even had Apple do further tests but cannot find anything else wrong with it.  I'm really struggling with this one!
    Sounds like you may have other problems, too.   
    If Apple has replaced 3 logic boards, but the problem persists, you may want to call AppleCare and ask for Customer Relations.  They may not want to transfer you, but insist on it (politely, of course, but firmly).  Have all the dates and details handy for them.  Ask them to either get it fixed, or replaced.

  • I plugged in USB cable but not showing connected status in my ipod 4th generation

    I plugged in USB cable but not showing connected status in my ipod 4th generation

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Show PR Status (where in workflow)

    Hi All,
    This is regarding the PR Creation through WebDynPro form.
    I am able to create the PR. Thanks to all the inputs from the Experts which I got on the forum.
    Ok, after creating the PR I intend to show the status i.e. it is lying with which Approver. I want to show this on a separate Tab "My Requests"
    Please let me know how to proceed.
    Regards
    Nikhil Bansal

    I understand the reasoning behind removing this. I have worked in IT for 30 years, I like how this works in FF4. My concern, however, is that my 75 year-old parents do not, all they know is that for the last 10 years I have been telling them that if they don't see a padlock they should not enter any sensitive information. They will never click on the verification button, nor would they understand any of the information there anyway. In addition color coding the button does not help my color blind father nor my nearly-blind mother.
    I have been a huge proponent of FireFox since the original beta, but I will now begin telling all of my non-technical family and friends that come to me for IT advice to use a different browser, because I have neither the time nor the patience to retrain them.

Maybe you are looking for