Scheduling Action Wizard via Windows scheduler

Hi,
Need to schedule my action wizards that runs at the middle of night... Did not see how it can be done on my Actobat 10 Pro... anybody has any idea?
Regards,
Jeff P.

Acrobat is designed not to allow unattended batch operation; that's a job for LiveCycle ES.
Tasks not initiated by a human being (e.g. automated server processing) are forbidden by the Acrobat EULA.

Similar Messages

[Forum FAQ] Cannot perform a backup schedule via Windows Server Backup and receive "The system cannot find the path specified." Error

Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

good

IE11 can't post form data to specific frame or window dialog opened via window.open()

Hello,
Form POST targeting to specific frame or dialog popped up via window.open() no longer works in IE11.
It worked fine in IE10 and all previous versions of IE.
Please see screenshot attached with simple test that reproduces this problem.
Direct Link to screenshot:
http://173.231.98.44/cgi/TestFolder/IE_11_widow_frame_targeting_BUG.jpg
Direct link to simple test page demonstrating this problem:
http://173.231.98.44/cgi/TestFolder/page2.asp
Note: IE11 doesn't report any errors, doesn't complain about anything, even when debugged via F12 developer tools. The only thing it complained initially was missing doc type declaration on top of page, but even after adding doc type definition, problem still
persists, makes no difference.
I tested this on fresh install of Windows 2012R2 while testing our web application with the new IE11.
I believe doing this on Windows 8.1 with IE11 will result in same bug/problem.
Our web application uses a technique whereby it launches a popup window via call to window.open(), passing blank URL and specifying a name for the new window. It then does a from post targeting the name of new dialog.
In IE11 this functionality has been broken and no longer works.
Problem is that IE11, instead of posting form to the newly created dialog, it launches a new instance of IE and then loads the requested form in this new instance of IE, while the dialog launched via window.open() remains on screen and is empty. If user repeats
launching same form post request (via button click for example), IE 11 keeps creating new empty dialogs and new IE instance for every form post executed. This totally breaks our application because we use many so called "wizards" that encapsulate
specific functionality in separate web page launched in a popup window.
Another related problem is that if a dialog is launched with window.open(), the java script code in the dialog can not target the parent frame that opened the dialog anymore. In our application, when a dialog is closed, it typically needs to trigger a refresh
of a specific frame within the parent window (again targeted by name) to reflect saved/updated info that user entered in the popup dialog. The result is that we can't refresh the parent frame after the pop up dialog closes. Instead, IE11 launches
a new instance of IE (not just a tab, but a whole new instance) and loads the parent frame in it.
The problem seems to be caused by broken frame name targeting mechanism in IE11.
Note that we force IE to compatibility mode 5, but even without specifying any compatibility, the problem remains.
Typical java script to reproduce this is:
<input type="button" onClick="Popup(this.form);" name="btn2" value="Popup Dialog">
function Popup(f){
    window.open("","MyNewDialogName","width=200,height=150");
    f.action = "page3.asp";
    f.target = "MyNewDialogName";
    f.submit();
Expected: IE11 should correctly post form to and load targeted page in the newly popped up dialog, without opening new IE instance and new tab. Repeatedly posting form to existing popup window should reuse that window, not keep on launching more popup windows
and then more IE instances.
Steps to reproduce the problem (include URL if applicable):
URL with sample page: http://173.231.98.44/cgi/TestFolder/page2.asp
1) Create page1.htm: <html><body>display "I'm in a popup window now ..."</body></html>
2) Create page2.htm with a button and onclick() event calling function to open dialog, and do form POST targeting new dialog calling page1.htm, like below.
<input type="button" onClick="Popup(this.form);" name="btn2" value="Popup Dialog"> function Popup(f){
    window.open("","MyNewDialogName","width=200,height=150");
    f.action = "page1.asp";
    f.target = "MyNewDialogName";
    f.submit();
3) Open IE11, navigate to page2.htm, click the "Popup Dialog" dialog button. IE 11 will popup the new dialog, but then it will also launch new instance of IE11 and display the page1.htm in it, instead of in the popup dialog.
Has anyone else encountered this problem?
Any insight or help is appreciated.
Regards
Peter

the default action of <input type="button" is submit. Note also that the default type of <button> elements is 'submit' also.
add a return false to the onclick inline event handler (which constructs the form submit attribues) to cancel the default form.submit behavior.
form elements have a target value with which you can specify the name window into which you want the form to open in.
<form action="process.aspx" target="popup">
you can use the window.open method with a query uri to achieve the same outcome.
window.open('process.aspx?s=search+term&foo=bar','popup',{features})
the outcomes of all scripted windows are affected by
your IE Popup blocker and tabbed browsing settings
which in turn is affected by your IE Security zone settings (for popup blocking handling)
and the settings of any third-party popup blocker you may have installed and enabled... it may not necessarily be visible on your browser toolbar.
The first step in troubleshooting web browser issues is to test in no-addons mode.
Use the Developer Tool to find out what documentMode the test page is opening in on your system. On Modal/Modeless popup windows use the f12 key to display the Developer tool positioned on the contentWindow.
Use File>Properties to find out what IE Security zone it maps to... there is a security setting to prevent navigation into zones of lower integrity.
Rob^_^

Action Wizard - modify "Initial View" settings

I am trying to figure out if there is a way to change the "Initial View" settings in the document properties using the Action Wizard.
For accessibility reasons I need the Document Properties > Initial View > Window Options > Show settings to "Document Title" as opposed to the default "File Name".
Any suggestions? i cant find a way to change this using the "Create New Action" options
Thanks.

It's under Document Processing - Set Open Options - Display Document Title.

Using Action Wizard is possible to add the step to date stamp the pdf

Using Action Wizard is it possible to create the steps:
Add text to date stamp
Javascript
Encrypt
Save

Hi,
We cannot display the year information on Windows 8.1 Lock Screen.
The behavior is by design.
Thanks for your understanding.
Regards,
Kelvin Xu
TechNet Community Support

Actions Wizard Panel missing actions

How do I get the Action Wizard Panel to show recently created actions? Mine only shows the 6 default actions that come with acrobat. The actions I created are listed at the very top in the "manage actions" dropdown, but they do not display, and therefore, I do not seem to be able to run them! Has anyone encountered this before? Windows 7, Acrobat XI Pro. I've updated acrobat, repaired the installation, and checked that it is the most current version. What am I missing? Thanks!

Guess I'll answer my own question before I forget how to navigate to the forums. It may not be a total answer, but in a total fluke-move, I found out it appears to have something to do with screen real estate: if I close all my panels, and open ONLY the actions wizard, the actions are all listed. Maybe the panel populates actions from the middle one out ... or something.

Applescript for running specific action from action wizard...

Hi Forum,
using this applescript I m running my "INDEGN" action from action wizard...
the first step is activated through the applescript.. (ie. INDEGN action is correctly picked)
but how to "click next button" to proceed to next steps..
tell application "System Events"
    tell application process "Acrobat"
        tell application "Adobe Acrobat Pro" to activate
        click the menu item "INDEGN" of menu 1 of menu item "Action Wizard" of the menu "File" of menu bar 1 ## here it is not cliking next button.....
        click button "Next" of window "Action: INDEGN"
click button "Close" of window "Action: INDEGN"
    end tell
end tell
many thanks for the support..

HI DAVE,
thanks for the reply,,
Is there any other way to run "my action" from action wizard. using script....
Would be a great help if advised....
Many thanks...

Applescript to run "action" in action wizard

Hi Forum,
using this applescript I m running my "INDEGN" action from action wizard...
the first step is activated through the applescript.. (ie. INDEGN action is correctly picked)
but how to "click next button" to proceed to next steps..
tell application "System Events"
    tell application process "Acrobat"
        tell application "Adobe Acrobat Pro" to activate
        click the menu item "INDEGN" of menu 1 of menu item "Action Wizard" of the menu "File" of menu bar 1 ## here it is not cliking next button.....
        click button "Next" of window "Action: INDEGN"
click button "Close" of window "Action: INDEGN"
    end tell
end tell
many thanks for the support..

Hello Rajinik,
I found your question in the forum and I am exactly in the same situation...
I hace some actions defined in Acrobat X Pro and I would like to execute them just by saving a file in a folder, but it seems something difficult to achieve.
Did you find any help on this or another forum to resolve it?
Searching for some info, i found a website with some info about a way to automatically OCR the pdf pages through theaction wizard, but it didn´t worked in my Mac. Search in Google "OCR This"
Thanks and Regards
Johanet

How do I STOP receiving Email notifications on my iPhone, notifying me about every time I login regularly, to iCloud etc via windows computers?

How do I STOP receiving Email notifications on my iPhone, notifying me about every time I login regularly, to iCloud etc via windows computers? Ta.

go>setting>notifications>mail>turn allow notifications off

Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
Madhu

Hi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure

I am having problems importing from a DVD or a CD to my Ipod nano via windows 8. I initially set everything up on a computer with windows 7, and authorized the windows 8 computer as well. Howevre, the oly thing that comes up on windows 8 is my purchases

I am having problems importing to my Ipod nano via windows 8. I usually do this from a windows 7 computer and have had no problems; hoever in windows 8 I can only see items purchased in the Itunes store. I do not have access to my entire library, which includes song uploaded from CDs and some videos. As a result, I'm having problems uploading any new items from CDs or DVDs. The computer with windows 8 is an authorized computer, so I don't understand why I'm having the problem.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Can't access photos via windows, everything else works iTunes, external software etc.

Hello,
Since I installed Windows 8.1 I have quite big problem, can't access photos via windows explorer. iTunes and other software can see phone and works completely fine.
There is error 28 in device manager.
Tried uninstalling all services including iTunes itself and got latest iTunes today and still no luck.
Anybody knows solution to this ?
(iPhone 4S iOS 7.0.4)

Is it just me, who got this issue ?

I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean. When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right h

I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iPhone 5 is no longer visible to my PC via Windows Explorer

My iPhone 5 (running iOS 8.02) is no longer visible to my PC (running Windows 7) via Windows Explorer. In the past, I have been able to see the phone listed as a Device in Windows Explorer when connected via USB cable, and could navigate to the DCIM folder to see and copy photos just like any other hard driver.
Since installing iOS 8.02, the phone no longer appears in Windows Explorer.
If this is no longer possible, how can I transfer photos from iPhone to PC? I have tried clicking around in iTunes, but can't find any relevant functionality there, either - am I missing something?

You're welcome. There are many blurred lines with respect to iOS 8 photo management -- i.e. is the photo actually on the device, or only in iCloud? If it is in iCloud only, and you put it into an album on the iPhone, does it get downloaded to the device and is it still full resolution?
Part of the problem may be that there are still some unfinished things with respect to photos. The "iCloud Photo Library" feature seen in pre-iOS 8 release is still in beta form, so whenever that gets full release there could be some sense in all this. There's also the pending replacement of iPhoto and Aperture on the Mac platform, slated to be replaced by a new "Photo" app, so that may play into the big picture on photo management.
But for the time being, I don't feel that the changes to photo management in iOS 8/ iCloud have been for the better. I can only hope that we get a more elegant photo management process with these pending changes.

Best way to migrate existing XP SP3 partition to a virtual machine to run via Windows 8.1 as physical partition and not a vhd?

Hi I have a current XP SP3 setup have been using in a dual boot with Windows 8.1(on separate partitions on different hard drives - I think these are SATA drives) but now am thinking of migrating my XP partition preferably as a live virtual machine
to be run as a guest via Windows 8.1 as host so I don't have to do the rebooting. Also prefer this to making a VHD of my XP so can use the existing partition allocated for it rather than taking up extra space as VHD on my windows 8 (and don't want yet
to replace my xp dual boot in case it does not work so well as vhd, as I have a lot of old educational programs my kids still use on it that I don't really want to put onto my W8.1). Will also save time if I don't have to convert it to VHD first. I
also do not want to reinstall a new XP Sp3 virtual machine from scratch for same reason - will take too long to resetup -just use existing as is.
I have used VMWare player and Virtual Box in past with an old 98SE system as a virtual VHD/VPC file but VMWare workstation is paid which may be the one I need to use a physical partition but I prefer to try freeware options first.
Will Hyper-V in Windows 8.1 (I have retail PRO version of both my XP and Windows 8.1) be able to do the same as VMWare workstation? OR is there another option to run the physical XP?
The other thing with my XP setup is that the user profiles that people login with are located on a different partition E (80GB) to my XP which is on J (100GB) and most of the programs for it run from partition D (over 120GB) and the XP boot loader resides
on a partition C (2GB) (which is not the Windows8.1 partition which becomes C only when it boots, but this C drive for XP may also be having the Windows 8 boot loader and files for that -using EasyBCD to handle boot menu of W7 type boot loader).
So I need a system that can mount these other physical partitions also alongside with my XP partition when it boots up.
So what are my options for running this XP SP3 setup via Windows 8 as a guest operating system?
Also will doing this be likely to require reactivation of my existing windows XP (retail) which means I cannot then use it again if I go back to the XP dual boot at times or in case the VM setup does not work?
Also do I need to change my XP first so that it boots off its own drive rather than the C partition - and how do I set this up then using EasyBCD or windows boot repair?

HI I found I had to make physical disk offline to use in Hyper-V which I cannot do and do not want to do with all partitions - cannot choose just ones want.
So now am trying to make VM of my physical XP -and other partitions neeeded but D partition is over 127Gb so cannot use Disk2VHD.
Here is what am trying now - any other suggestions for alternate software to vmware convertor/disk2VHD maybe to do partitions over 127GB? I have posted also at VMware forums but no answer as yet.
Advice on doing a physical XPSP3 conversion to a VM for Virtual box and hyper-v ultimately
Hi I need advice as to best way to convert an existing XP Sp3 install on a physical hard drive along with other related partitions to a Virtual box VM image with aim to convert that VM image to a Hyper-V VM for use with Windows 8.1 host.
I have several C (boot ini partition), D programs, E Data, etc partitions and a current dual boot with an extra XP install I use as a backup system.
My main XP is on J drive and other XP on I drive with C drive boot ini that switches btw 2 with J set as default.
I have a D partition that is over 127 Gb so cannot use Disk2VHD which would have been easier, and it seems there is not a way to make a direct Hyper-V VM from converter but only Vmware VM?
I do not have or want to purchase as yet VMware Workstation as have W8.1 Pro that can use Hyper-V to run my XP SP3.
I seem to also have an issue with COM+ corrupted on my machine XP J drive ( It tried to reinstall the COM+ but my es.dll file won't register and I did get a failed conversion with converter when tried earlier at 94% saying VSS snapshots have
reached their limit). I think this is related to my COM+ issue which I am not sure now how to fix apart from repair install of my Xp (as I have tried repairing COM with various articles searched on google to no avail) which I may do first before
retry conversion. However my ALT XP on I drive seems to be fine with being able to browse the COM+ applications ok. SO maybe I can use that instead but it is the J drive XP I want the most (not sure if will work at reboot if I do not
hot clone it?)
I have read also the manual for converter 5.5.1 ver standalone and am not sure of a few things so if someone can guide me it would be very much appreciated.
First of all which version VM should I make image of if I later want to convert it to a Hyper-V VM image (I only have free Virtual Box latest ver, VMware Player and Hyper-V on Windows 8.1 PRo) ie: VMware workstation 10 or Vmware Player 6 or lower
ver or other? OR is there another software I should install for the conversion or later conversion to Hyper-V? I prefer to use Hyper-V over Virtual Box and Vmware Player if possible, but should these others work just as well for my Xp Sp3 existing
system as a VM in Windows 8.1? Please advise which you think is best of these?
Should I leave all configuration options off while converting and even XP licence, workgroup etc or is it most likely that I will have to reactivate my XP (retail ver) once I reboot in the VM although I am putting to run on Windows 8.1 host on exact same
hardware as my current XP in dual boot (replacing my physical copies which I don't intend to use after conversion)? Can I enter licence etc later as well?
I currently have 8 GB ram total -should I leave Xp one at max it suggests of around 3Gb ram?
I have Quad core processor -but should I make Xp Vm one dual core for when it runs on W8.1 host to allow the host some processors so can run at same time or leaving my Xp at quad core will be ok?
Network - I want to use host one as I read it is safer for obsolete XP so do I set that at start or is it better to change this later too -allowing xp to have own internet access (maybe as may need to reactivate also - don't want to call Microsoft
if can avoid it)?
If I just want to convert resulting VM to Hyper-V VM -which software to use after for this that is freeware (Virtual Box or VMware Player or Hyper-V -not sure which can do it) and do I not then install Vmware tools?
SYSPprep should I do anyway regardless of what target VM will be when configuring later, even if on same hardware machine? OR can I just boot Vm and see if boots ok first?
Anything else I should set specifically for this future use of the VM image in hyper-v?
AU

Scheduling Action Wizard via Windows scheduler

Similar Messages

Maybe you are looking for