Scheduling not possible; duration cannot be greater than interval

Hi,
i am runing one yard management scenario.When i am trying to schedule the activity of a vehicle in yard monitor system showing the message "Scheduling not possible; duration cannot be greater than interval
Could you please help in this regard?
Sandip

can you tell me which version it is >
i try to fix in dtexec
getting following error :
Started: 2:02:13 PM
Error: 2015-01-30 14:02:14.68
Code: 0xC000F427
Source: Member Eligibility
Description: To run a SSIS package outside of SQL Server Data Tools you must
install Member Eligibility of Integration Services or higher.
End Error
Warning: 2015-01-30 14:02:14.69
Code: 0x80019002
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution
method succeeded, but the number of errors raised (2) reached the maximum allow
ed (1); resulting in failure. This occurs when the number of errors reaches the
number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
rrors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:02:13 PM
Finished: 2:02:14 PM
i cannot upgrade original package

Similar Messages

Error - The version number in the package is not valid. The version number cannot be greater than current version number

whats does this error mean
i download 2008 r2 and try to open package but still getting error
Error 1
Error loading The version number in the package is not valid. The version number cannot be greater than current version number.
Error 2
Error loading Package migration from version 8 to version 3 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".

can you tell me which version it is >
i try to fix in dtexec
getting following error :
Started: 2:02:13 PM
Error: 2015-01-30 14:02:14.68
Code: 0xC000F427
Source: Member Eligibility
Description: To run a SSIS package outside of SQL Server Data Tools you must
install Member Eligibility of Integration Services or higher.
End Error
Warning: 2015-01-30 14:02:14.69
Code: 0x80019002
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution
method succeeded, but the number of errors raised (2) reached the maximum allow
ed (1); resulting in failure. This occurs when the number of errors reaches the
number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
rrors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:02:13 PM
Finished: 2:02:14 PM
i cannot upgrade original package

The code segment cannot be greater than or equal to 64K. - Windows 8

Hello,
I am having an issue on some windows 8 systems, a crash occurs in NtSetEvent, the exception thrown is "0x000000C8: The code segment cannot be greater than or equal to 64K.".
This crash only occurs on Windows 8.
The callstack doesn't help much
    KERNELBASE.dll!_RaiseException@16()   Unknown
    ntdll.dll!_NtSetEvent@8()   Unknown
    kernel32.dll!@BaseThreadInitThunk@12()   Unknown
    ntdll.dll!__RtlUserThreadStart()   Unknown
    ntdll.dll!__RtlUserThreadStart@8()   Unknown
Could it be a bug within windows 8 ? If not what steps should I take to find the cause of this crash ?
Thank you,
Max

I have a feeling like you have corrupted something. Likely by stomping on memory due to a bug in your program such as a buffer overrun or use of a deleted object in C++.
Although you may have incurred corruption to your registry through a variety of means, not limited to bad disk drives, or the unintentional write of bad data due to a bug in your program, if you are experiencing this on multiple systems, then registry corruption
is less likely. Which brings me back to the idea that you have a bug in your code that has trashed memory somehow.
The stack traces and error codes do not indicate the cause of the problem.
What does your program do??
Without seeing at least some of the code, or knowing how big the scope of the code is, it's not useful for me to start guessing specifics of what may have happened. But since you're not disclosing anything at all about your code apart from your exception,
I'm forced to do some guesswork and just give general advice.
Here are some easy classical strategies for locating the cause of the problem:
Build your code in debug mode and run your code in the debugger. (Yes, some people need to be told this.)
Bisect the problem through revision control. Back up to when the problem didn't happen and find the last revision that causes the problem. (If you're not using a revision control system, start now.)
Bisect the problem by eliminating chunks of code. Trim out functionality until the problem goes away.
Write unit tests. Test the various pieces of your program to eliminate bugs. At the very least, make use of assertions.
Have a look at what your program is DOING when the crash happens. Certainly there must be a cause. Try to isolate the problem by associating it with a certain activity in your program. Gate off functionality by introducing places where
your program waits before proceeding. At some point, you'll pass a point where the error can now occur.
Run code analysis on your project and see if it comes up with any possible culprits.
Don't ignore compiler warnings, they often indicate something that can turn into a bigger problem. Compile at the highest warning level.
Look at your usage of various API functions for logical mistakes. Here are some examples:
When using third party libraries or SDKs, have you initialized libraries appropriately? Have you called all the appropriate initialization functions and used the APIs as intended? Read documentation and make sure you are using calls appropriately.
For functions that take a HANDLE, such as SetEvent, are you passing a valid handle? Have you closed the handle but kept the old handle value around?
When storing pointers to objects, have you accidentally deleted an object but kept its pointer around, only to make use of the pointer at a later time in your program? This is particularly harmful when performing a write operation as you can corrupt
just about anything.
Are you using variables without giving them an initial value? You may get unexpected values for variables if you do not initialize them. This is particularly important for stack variables.
When using arrays or string buffers, have you allocated enough storage for the bytes you are writing? C++ doesn't detect reading or writing with an invalid array index as a problem. It happily reads or writes past the end of your intended
storage. Such offences are called "buffer overruns".
When multi-threading, are you taking steps to ensure data integrity? Unsynchronized access to data from multiple threads is a notorious cause of strange and difficult to reproduce bugs. Your data passes through states that you may not expect
that can be observed by unsynchronized threads. Use locking mechanisms appropriately and marshal your data diligently.
Are you relying on valid input from an external source beyond your control such as a network client, database, or file? Diligently validate all input that comes from an external source. Be prepared for any situation that you can't control at
compile time.
Are you ignoring error codes? Some functions may fail, but you may be assuming they have succeeded and then gone on to use invalid data.
Look for mathematical errors. Calculation of indices of arrays are a notorious culprit. Beware of off by one errors. Indices start at zero and go up to N-1, where N is the number of elements in the array.
Beware of sentinel values. Some functions such as "IndexOf" will return an index of -1 when not found and can result in a miscalculation of an actual index.
Are you making use of
RAII techniques in your code? Failing to correctly allocate and deallocate resources can cause problems.
Are you making use of unsafe casts? C-Style casts say "I know what I'm doing", and you can get into dangerous situations. Prefer static_cast<> over a C-Style cast wherever possible.
Also look at your project settings for problems
Have you accidentally mixed incompatible compiler settings between components?
Approach debugging with an open mind. Mark Twain said, "It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so."

The version number cannot be greater than current version number

i am deployingmy ssis package which is in 2012.(version 6)
and my ssis server also in 2012.
but i am getting error:
"the version number in package is not valid, the version number cannot be greater than current verison number"
and one more thing how to see ifmy package is in 2012,by looking it in notepad?

Hi coool_sweet,
Based on the error message that "The version number in the package is not valid. The version number cannot be greater than current version number.", we can infer that the underlying cause may be that the current SSIS package is created in SQL Server
2012, while you are trying to open or execute it in SQL Server 2008R2 or earlier versions.
As to your scenario, I guess you are using old version of the DTEXEC instead of the new one to run the package. That means, the exe shipped with 2008R2 or earlier versions is picked up when it is expected to use the one shipped with 2012. So, obviously this
happens when SQL Server 2012 is running along with SQL Serve r2008R2 or earlier versions on the same machine.
To fix this issue, there are three workarounds to correct this.
Hard code the path of SQL Server 2012's DTEXEC while calling the SSIS package as shown below.
C:\Program Files\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe /F "D:\MyFolder\MyPackage.dtsx"
Rename the old exe in the 2008R2 path to a different name (Example:- C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTEXEC_Old.exe)
Go to PATH environmental variable and edit it in such a way that "C:\Program Files\Microsoft SQL Server\110\DTS\Binn" path appears well before the "C:\Program Files\Microsoft SQL Server\100\DTS\Binn" path.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Credit Allowed cannot be greater than default

Dear Gurus.
I want to cancel the Excise Part 2 Entry , But system gives me one error
" credit Allowed cannot be greater than default 8.66-."
I am waiting your Reply.
Regards,
Riten Patel .

Hello Plauto Abreu .
we have done GRV, part 1 entry, and part 2 entry.
we have
Base Value 1,144.44
BED       445.45
ECS       8.66
HSCess    4.45
AED       197.00
then we have cancel the GRV, then we want to cancel the part 2 entry by J1IEX with rejection code.
but one warning message is coming that credit Allowed cannot be greater than default 8.66 -.
system allow to post the document
system generate following
PART I entries updated :
Entries created   : N.A.
Serial no              : N.A.
Entries canceled: N.A.
PART II entries updated :
Entries created : 1 inRG23A
Serial no             : N.A.
Reversed           : 0100013408
Acc. Doc.           : N.A..
then we want to cancel the part1 entryusing cancel j1iex.
now we have save it , system genarate following
Excise Header and Item Details :
o Excise Invoice 9000007162 / 2010 will be
marked with status 'Cancelled'.
o All line items will be marked with status
'Cancelled'.
PART 1 :
o 7 entries will be marked as status
'Cancelled'.
PART 2 :
o No Credit has been availed.
Cancel? Are you Sure? "
then system gives us one error message that
"Reverse the availed CENVAT credit before cancelling excise invoice."
i am waiting your reply.
regards,
riten patel

Userexit for not allowing release order qnty greater than contr targt qnty

hi,
I posted the same mail before, but it seems we cannot do it in configuration..plz provide me a suitable User exit for the same..
When i am creating a release order for a quantity contract, the system is allowing to save the doc if at all the quantity is more than in the contract, i.e. if the user changes the quantity in release order more than the contract quantity, the system is issuing a warning message and allowing to save.(mess no V1 501)
I want to change this warning to an error message..
I checked in OVAH but only V4 messages are available there..
In SE91 i am able to see the message but there is no way for any change..
Thanks,
Sam

hi Sadhu Kishore,
In VTAA..from qnty contract to sales order in item level document flow is updated...the following is assigned there
Create doc. flow records except for dely/goods issue/billdoc
I searched some previous threads of the same characteristics, so everybody is telling the solution will be a user exit...
plz help reg thiss
Thanks,
Sam

Falsh effects not working if image width greater than 2782 px

I am trying to apply a filter (blur or desaturare) to a
movieclip, but i noticed that it does not work if the image inside
the movieclip is larger than 2782 px (width). Can anyone explain me
why? How can I solve this?
thaks
ps - I am using Flash Pro CS3
Diogo

Ze_Povinho wrote:
> I am trying to apply a filter (blur or desaturare) to a
movieclip, but i
> noticed that it does not work if the image inside the
movieclip is larger than
> 2782 px (width). Can anyone explain me why? How can I
solve this?
That's flash functionality and limits set by Macromedia/Adobe
to
to prevent memory problems. The filter is turned off if the
image exceeds
the limit of 2880 pixels.
But, not too worry, the limit is removed or increased in the
upcoming
Flash CS4 and Player 10.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Not possible to filter for more than one dimension in Datasource script filter method?

Hi experts.
We have a scenario where we need to apply filter on multiple dimensions .Eg.
We have one data source DS1 with Dimension HUb and material_grp .
Now we want to filter the DS1 with HUB and Material_grp at the same time.
I am using below statement to apply filter.
DS_1.setFilterExt("ZHUBCODE", "HUB1" );
DS_1.setFilterExt("ZMAT_GRP", "MATG1" ); //Clears HUB filter and shows data for all HUBS , filter with material group only
But Setfilter method first delete the last filter and apply new one.And set filter method takes only one dimension at a time.
Please help me in this

Hi Rajender,
Just as a follow-up, if you are using BW as a data source, make sure for each of the dimensions, ZHUBCODE and ZMAT_GRP, that in the Initial View Editor of the data source, the Members for Filtering > Only Values with Posted Data option is selected, which should be the default anyway.
Again if you are using BW, the other option you could try is to use the internal key for filtering with setFilter instead of setFilterExt. Is there a particular reason why you are using the external key?
Regards,
Mustafa.

Greater than operator for date in obiee analysis

Hi all,
I just need your help. is it possible to use the greater than or less than operator (in filter) for date in creating analysis?
FOr example: I need to have the greater than months from "January 2015" for specific measure.
Thanks!

Somehow the person records for this person have become corrupted. Have you any idea how that might have happened? Options:
1) Someone or some program has issued a direct table update on per_all_people_f
2) Someone has used Help > Diagnostics > Examine to modify the data
3) An Oracle bug. This one is unlikely but could happen if using an unusual form (Shared Person Form, for example) and perform a weird combination of actions/keystrokes. But you'd need to be able to reproduce it if you want Oracle to fix it.
If you're support contract is invalid or you don't have a support contract your options are limited. You can either:
a) Bring your patch level up-to-date and then raise an SR. If Oracle agree to provide a script to fix it they'll probably just do direct table updates to resolve this record.
b) Fix this yourself using direct table updates. This obviously isn't supported either. If you do this, make sure you know what you're doing and get it 100% right first time. BE VERY CAREFUL!
Obviously I strongly recommend option b.

Cycle counting greater than one year

Looking for a method to have cycle counting (table V_159C) set at three year intervals. Seems that it is not possible to set at less than one year. No decimals are allowed.
Can anyone assist?
Thanks Bruce

Hi Bruce
The idea is to count all the materials at least once in an year.
We did this for one of our customers (Good ABAP required):
a) Maintain settings for CC in IMG for A,B,C,D classes. Whereever you want more than one year, we just maintained 1 (once in a year).
b) Maintained one more similar table.
c) Maintain material master with fixed CC indicators for all materials
d) Copy the cycle count program and create you own program with new logic
Best regards
Ramki

Slide show greater than 200

I have Photoshop Elements 6.0 and Premier Elements 4.0. I would like to create a slide show with greater than 200 slides and then burn that show to a DVD. Photosho Elements will not let me work with greater than 200 images. How do you get around this problem?

Create two projects intead of one and export the slide show in to PRE then burn a DVD.

Picture duration longer than 4sec not possible? Always gets set to 10min instead.

Hi,
I am using iMovie 11 (9.0.4). At some point in my project, I want to show a single photo, but not for the default 4 seconds, but rather for 30 seconds. So I double-click on the clip and in Clip->Duration I try to change the 4,0s to something else.
First thing which is stange is that I cannot simple set my cursor behind the 4 and hit backspace. Even entering something after the 4 (e.g. 42) is not possible. The only thing which I can do, is setting the cursor behind the 's' and delete everything. Only then am I able to actually enter something in this edit field. Well, I enter 30, but without the 's', because pressing the 's' key on the keyboard is again not possible. Strange? If I hit Enter, 30 get immediatley replaced by 10:00 and now my clip is 10 minutes long. No matter what I enter in this field, it always gets set to 10 minutes.
Does anyone has a solution for this?

You simply cannot - repeat cannot - go from one menu to another menu without breaking up the soundtrack. It is not possible under DVD-Video specifications. DVD-Video is graphically dominant, which means when you switch from one menu to another, or from a timeline to a menu, or from a menu to a timeline, the audio
i must change to the next item's audio stream.
There is no way around this.
I have LOST season 1, and will check it out for you & get back to you later on.
You CAN have continuous audio from the movie into when the highlight layer (subpicture) appears by delaying the appearance of the buttons. The whole thing then becomes one long Motion Menu, with delayed buttons. This can have one long audio stream. Clever timing will make it appear that Audio is seamless if it goes from Motion to Static. I will check this out on Season 1 though.
Slideshows.
Best way to do these is to not actually create a slideshow, but instead create a video timeline at a very low bitrate for the video. Set up your stills as & where you want them in relation to your Audio, in your NLE (Premiere Pro?) and export to a 3Mb/sec MPEG-2 clip instead. You may - depending on the pictures - get away with 2.5 or even 2Mb/sec.
Chapters.
What you want to do can only be done via scripting.
Text.
Subpicture overlays can contain a maximum of 4 colours, including background as colour #1. Blu Ray & HD DVD both get around this and increase the allowed colours in subpicture overlays. What this means to you is that you cannot use drop shadowing or anything other than primitive anti-aliasing. The best you can do is to set the main text colour as the base, and then use the 2 highlight colours at 66% & 33% respectively. It takes practise but can be quite effective.

I've been trying to get the spreadsheet in numbers to be portrait rather than landscape, but cannot seem to be able to work out how. Maybe it's not possible, does anyone know how?

I've been trying to get the spreadsheet in numbers to be portrait rather than landscape, but cannot seem to be able to work out how. Maybe it's not possible, does anyone know how?

Open the inspector by selecting the menu item "View > Show Inspector", then click the "Sheet" segment at the top, then click the landscape button in the "Page Layout" section:
I suggest you download the free Users Guide from Apple. Here's the link:
http://support.apple.com/manuals/#productivitysoftware

Schedule line getting confirmed when Ordered Quanity is greater than stock.

Hi Sap Gurus,
We have an issue in one of the sales scenario.
In one of the sales orders the ordered quanity is purposely maintained greater than the stock at respective storage location(batch managed).
In this case the schedule line should not get confirmed and it should not allow delivery document creation.
But in the sales order the schedule lines are geeting confirmed and even the delivery document is getting created with picking request completion.
Could you please help to understand :
1. why the schedule lines are getting confirmed when ordered quantity > Inventory?
2. How do I stop delivery document creaton in this scenario?
Looking for a quick response.
Thanks in advance,
Bhaskar

Hello Bhaskar,
Is Availability Check in your system considering Replenishment Lead time, if yes, then this is possible.
Check this IMG Link:
IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Availability Check with ATP Logic or Against Planning - Carry Out Control For Availability Check
Here check the RLT settings.
Also check settings under In/Outward Movements, where things like include Purchase Order can lead to confirmation of stock in Sales Order, despite physical inventory being present.
Hope this helps,
Thanks,
Jignesh Mehta

Greater than or equal symbol not working

Hi,
I cannot get the "greater than or equal to" symbol to display properly. I can get the less than or equal symbol to display by typing Ctrl+q #, and then formatting it as Symbol font.
According to the Character_Sets.pdf FrameMaker Online reference, the greaterequal symbol is Ctrl+q 3, but when I format it as Symbol, FrameMaker displays a box (which looks to me to be a non-printing character).
Any suggestions on how I get a "greater than or equal to" symbol to display?
Thanks,
John B.
FrameMaker 8 (8.0 p277)
Windows XP SP 3

Error7103 wrote:
> I cannot get the "greater than or equal to" symbol to display properly.
Try this...
Click in margin.
Format > Characters > Designer...
Character Tag: [ Symbol ]
Family: [ Symbol ]
all else As Is or blank
Commands: New Format...
[*] Store in Catalog
Click in Body Flow A.
Special > Variable...
[Create Variable]
Name: [ char.symbol.greaterequal ]
Definition: [ <Symbol>\xb3 ]
[Add]
[Done]
[Insert]
Advantages:
Avoid frequent arcane typing: you only need to look up the special character entry sequence once per document (if that - we keep these var defs in a separate catalog for ease of application).
Isolates special char encodings for dealing with eventual replacement by native Unicode glyphs and/or ports to platforms lacking legacy Symbol overlay font
Isolates special char renderings for possible changes to font with native >= glyph
Assures text inserted adjacent to symbol will be in native paragraph font, and not Symbol.
Prevents spell checker from needlessly complaining.
Is portable between FM platforms and releases, although \xb3 does appear as Š (cap s caron above) in Windows dialogs.
Disadvantages:
If you apply a Default ¶ Font to the para, the variable is no longer in Symbol font (but this is always the case for variables that use alternate fonts). You have to re-select the var (which may be hard to even see), and re-insert it.
If you highlight the entire para, or just the text containing the var, and apply a new PgfTag, the variable likewise gets de-fonted. It has ever been thus.
You have to search by Variable, and not by special character.
So what do we suppose made this topic so popular that it's got over 1000 Views so far?
I tried these instructions with great anticipation, but alas, it did not work for me.
Maybe it works differently on FrameMaker 9. I even tried making a PDF to see if it just rendered differently on the screen, since you mentioned the display in Windows dialog boxes (even though I was just in the main flow).
See the screenshot below for my results.

Scheduling not possible; duration cannot be greater than interval

Similar Messages

Maybe you are looking for