Scheduling Problem in Productoin order

Greetings .....
                 i have on emtaerila whih has one opeartion which take 3 min for one number
this opeartion is performed on a work center which available 1224 min per day ....
now theroticaly ..
                  1   nos                takes     3        min  
so           3600 nos           wil take       10800  min
Now acording my available capacity
                1224 min             1  day
               10800 min           8.5 day 
so toatl time to produce 3600 wil be 8.5 Day ...
Now while certing production order of 3600 nos in opeartion  Oveview screen
i m getting result as
Start date  11.02.2009
End date   26.10.2009  ( 8 months)
Procesing Time  108000 min
Now processing time is correct as per theroticall but Start date & end date is very strange ??
How to resrict or  correct this kind of scheduling ..............
expecting positive reply..
thanks

Hi,
nos takes 3 min
so 3600 nos wil take 10800 min
Now acording my available capacity
1224 min 1 day
10800 min 8.5 day
while in Order you have written it is
Procesing Time 108000 min
Is it correct , or is it 10800 only?
Regards,
Dhaval

Similar Messages

  • Scheduling problem in planned order.

    Hi all,
    I have a problem in scheduling of planned orders.
    I had mentioned the following parameters.
    1. Available capacity in the work center as 06:00:00 to 12:00:00
    2.Set up time is 10mins in the routing.
    3. The planned order qty is 100 nos.
    While doing manual scheduling in planned order, the system proposes the start time as 11:50am and finish time as 12:00am. But as per calculation, for 100nos x 10 mins = 1000 min = 17 hrs.
    But the system calculated 10 mins for 100 nos.
    Is there anything i am missing , due to which the system is doing wrong scheduling.
    With regards,
    Afzal

    dear afzal ,
    system is taking setup time only for first piece you are machining and for rest other 99 piece its not considering the setup time.
    Check in the formula you are using if its defined as only to consider one time the setup activity or its taking piece wise/quantity  wise.
    Check and change it , it will solve your problem.
    Hope it helps you.
    regards
    Ritesh

  • Production Orders: Scheduling Problem

    Hello
    I have a scheduling problem.  I want the system to calculate the production order dates.
    I have maintained the following
    1.      Work Center:  A formula to calculate the duration.  I have marked the u201Crelevant to finite indicatoru201D in the Capacity Header Tab.  I have also maintained the available capacity as 24 Hrs.
    2.     Routing:  I have maintained the values for the standard value keys
    3.     SPRO:  In scheduling parameters for the order type, I have marked u201CGenerate cap requirementsu201D and u201CSchedulingu201D;  In the production scheduling profile, I have marked u201CSchedule orderu201D (on release) & u201CFinite Schedulingu201D (Availability check).
    But the production order is not getting scheduled & the start & end times are the same.  I get the error u201CNo req/capacity exists or not relevant for finite schedulingu201D.
    Can anyone guide me as to what I am missing?
    Best regards
    Tom

    Dear Tom,
    Please check following;
    1. Your operation contol key; whether it allows scheduling.
    2. scheduling parameters for production order on OPU3: Please select proper combination of plant and order type and tick scheduling and generate capacity requts indicators in detailed scheduling tab.
    Please revert back if problem persist.
    Best Regards
    Uday

  • Scheduling problem in LSMW for Sales Order

    I am doing LSMW for Sales Order using the BAPI method.
    I am able to upload the item details along with their quantities also but the problem that I am now facing is the scheduling problem.I am unable to schedule the item quantities, only the last quantity passed is taken as the final quantity and the consolidated quantity is also getting ignored.
    I am using E1BPSCHDL structure, in this structure I am mapping Itm_number , req_date and req_qty(scheduled qty).....
    in the structure E1BPSCHDLX, the same fields are mapped as 'X'.
    in the structure E1BPSDITM, I am mapping the item info along with the consolidated qty(TARGET_QTY), but this is getting ignored and the last scheduled qty is taken as the final consolidated qty and the rest scheduled qty data is getting rejected.
    Please do help... I dont know why this problem is coming... tried n number of alternatives but of no hope... do try to help me
    with regards,
    Daya.

    Check the format of your date and check the format expected.
    sometimes you can have diff like YYYYMMDD, MM.DD.YYYY,...
    Look at the converted data.
    Hope this helps,
    Erwan

  • Problem  with Process Order Scheduling..

    Dear Experts,
    i'm stucking with the scheduling of a process oreder.
    I've maintained all scheduling parameters into OPUZ except "selection ID" for detailed scheduling as it is grey & not allowing to fill any entry into it.
    I've also maintained production scheduler and other relevant settings into master recipe & resource regarding scheduling .
    Still i'm getting the error"Scheduling parameters for process orders have not been entered" message no CT609.
    Kindly help me out , where i'm wrong
    Thanx in advance...

    Dear Dennis,
    Ensure the scheduling parameters in OPUZ for the order type,plant combination and for all (* )scheduler you have maintainied
    the scheduling type,the check box for scheduling and generate capacity requirements under detailed scheduling is set.
    Check and revert back.
    Regards
    Mangalraj.S

  • Dates and quantities copied from Scheduling Agreement to Delivery Order

    Hi everybody,
    we're experiencing a problem with copying control for dates/quantities between Scheduling Agreement and Delivery Order.
    If we define a Forecast Delivery Schedule with more lines/dates into a Scheduling agreement, when I create a Delivery Order with reference to a specific date the system always copies the first forecast delivery schedule date, disregardful the date specified in the selection criteria for delivery creation and with the fact that this could have already been carried out.
    Here's an example:
    Forecast Delivery Schedule into Scheduling agreement:
    (Date) 12.03.07   (Quantity)  10 TO
    (Date) 13.03.07   (Quantity)  12 TO
    (Date) 14.03.07   (Quantity)  15 TO
    When delivery has to be created with reference to Scheduling Agreement, the system doesn't about the date specified in selection parameters (e.g. 14.03.07) and copies the quantity of the first forecast delivery schedule line (10 TO).
    Does anybody knows how to maintain Copying Control for dates and quantities between Scheduling agreement to Delivery Order?
    Thank you!
    Luca

    Dear Pattanaik,
    check data transfer from copy controls.for this T-code is VTLA
    here select your doc type and select details and check also item.check inside both types data trasfer wich is assigned change from this item to header.your problem may ve coming from here.
    hope this will helps you
    Prem

  • Ignore the number of schedule lines in sale order item when run MRP

    Dear All,
    I have a problem when I create production order (discrete manufacturing)
    When I create a sale order with one sale order item and 3 schedule lines for this sale order item.
    After that, I run MRP for this sale order, what I get is 3 planned orders for 3 schedule lines. It means that I will have 3 production orders for 1 sale order item.
    I want  create one production order for one sale order item whatever the number of schedule lines in sale order item.
    I think I have to config in MRP. Please help me.
    Thanks in advance

    Dear
    Check in OPPQ then look in Master data Availability Check & strategy for material also check whether u have maintained strategy for same material and see did u extended sales views for other material
    As u said 3 schedule lines for this sale order item check whether u have extended sales views for next material
    With Regards
    Pushpalas

  • I have a problem regarding sales order line item with confimed quanity

    Hi Experts,
    I have a problem regarding sales order line item with confimed quanity with '0'  with delivery block but confirming the sales order quantity once the order is released from credit check.
    The situation arises as per the below scenarios.
    Scenario - 1 -  When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
    Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx  and the order is set with credit check.  Once the order is relased from the credit check.  The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
    Scenario -2-  Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
    Maintain the stock for the line item 2 ( 5 Pcs).
    Once the order is released from the credit check.  Then  for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
    This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
    Can you please help me how to solve this issue.
    Looking forward for your reply.
    Thanks and Regards,

    Hi,
    I agree with your point.  In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check.  Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5,  But it should set to Zero quantity.  Quatity should not be get confirmed it should be Zero Quantity. 
    Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok.  But we dont want to remove the - Confirmation Block tick mark
    Please any one can help me if you have any solution to solve this problem.
    Thanks and Regards.

  • BAPI - Problem in Sales order creation

    Hi Friends,
    I have problem in Sales order creation using BAPI ,I am getting a messsage - Error in creating document ,I have sent the code along with this mail ,can you help it out.
    Code:
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
    PARAMETERS: p_auart TYPE auart OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Sales organization
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
    PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Distribution channel
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
    PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Division.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
    PARAMETERS: p_spart TYPE spart OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SKIP 1.
    Sold-to
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
    PARAMETERS: p_sold  TYPE kunnr OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Ship-to
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
    PARAMETERS: p_ship  TYPE kunnr OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SKIP 1.
    Material
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
    PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Quantity.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
    PARAMETERS: p_menge TYPE kwmeng  OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Plant
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
    PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Data declarations.
    DATA: v_vbeln            LIKE vbak-vbeln.
    DATA: header             LIKE bapisdhead1.
    DATA: headerx            LIKE bapisdhead1x.
    DATA: item               LIKE bapisditem  OCCURS 0 WITH HEADER LINE.
    DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
    DATA: partner            LIKE bapipartnr  OCCURS 0 WITH HEADER LINE.
    DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
    DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                             WITH HEADER LINE.
    DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                             WITH HEADER LINE.
    Initialization.
    INITIALIZATION.
    v_text   = 'Order type'.
    v_text1  = 'Sales Org'.
    v_text2  = 'Distribution channel'.
    v_text3  = 'Division'.
    v_text4  = 'Sold-to'.
    v_text5  = 'Ship-to'.
    v_text6  = 'Material'.
    v_text7  = 'Quantity'.
    v_text9  = 'Plant'.
    Start-of-selection.
    START-OF-SELECTION.
    Header data
    Sales document type
      header-doc_type = p_auart.
      headerx-doc_type = 'X'.
    Sales organization
      header-sales_org = p_vkorg.
      headerx-sales_org = 'X'.
    Distribution channel
      header-distr_chan  = p_vtweg.
      headerx-distr_chan = 'X'.
    Division
      header-division = p_spart.
      headerx-division = 'X'.
      headerx-updateflag = 'I'.
    Partner data
    Sold to
      partner-partn_role = 'AG'.
      partner-partn_numb = p_sold.
      APPEND partner.
    Ship to
      partner-partn_role = 'WE'.
      partner-partn_numb = p_ship.
      APPEND partner.
    ITEM DATA
      itemx-updateflag = 'I'.
    Line item number.
      item-itm_number = '000010'.
      itemx-itm_number = 'X'.
    Material
      item-material = p_matnr.
      itemx-material = 'X'.
    Plant
      item-plant    = p_plant.
      itemx-plant   = 'X'.
    Quantity
      item-target_qty = p_menge.
      itemx-target_qty = 'X'.
      APPEND item.
      APPEND itemx.
      Fill schedule lines
      lt_schedules_in-itm_number = '000010'.
      lt_schedules_in-sched_line = '0001'.
      lt_schedules_in-req_qty    = p_menge.
      APPEND lt_schedules_in.
      Fill schedule line flags
      lt_schedules_inx-itm_number  = '000010'.
      lt_schedules_inx-sched_line  = '0001'.
      lt_schedules_inx-updateflag  = 'X'.
      lt_schedules_inx-req_qty     = 'X'.
      APPEND lt_schedules_inx.
    Call the BAPI to create the sales order.
      CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
           EXPORTING
                sales_header_in     = header
                sales_header_inx    = headerx
           IMPORTING
                salesdocument_ex    = v_vbeln
           TABLES
                return              = return
                sales_items_in      = item
                sales_items_inx     = itemx
                sales_schedules_in  = lt_schedules_in
                sales_schedules_inx = lt_schedules_inx
                sales_partners      = partner.
    Check the return table.
      LOOP AT return WHERE type = 'E' OR type = 'A'.
        EXIT.
      ENDLOOP.
      IF sy-subrc = 0.
        WRITE: / 'Error in creating document'.
      ELSE.
    Commit the work.
        COMMIT WORK AND WAIT.
        WRITE: / 'Document ', v_vbeln, ' created'.
      ENDIF.
    Regards,
    Dinesh

    what messages u are gettting in RETURN ? Please check the RETURN tables data.
    [code]CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
    EXPORTING
    sales_header_in = header
    sales_header_inx = headerx
    IMPORTING
    salesdocument_ex = v_vbeln
    TABLES
    return = return
    sales_items_in = item
    sales_items_inx = itemx
    sales_schedules_in = lt_schedules_in
    sales_schedules_inx = lt_schedules_inx
    sales_partners = partner.
    Regards
    Prabhu

  • Dedicated scheduling of a planned order having a fixed activity

    Hi Gurus,
    We're using PP/DS Optimizer with Total Delay Costs objective function, following a Backwards Scheduling strategy in order to Reduce Premature Scheduling. Order activities are then scheduled as close as possible from the requirement dates. However we would wish to apply a forward scheduling strategy to the orders having a fixed activity, but starting from the existing order planned start date instead from the system date, i.e:
    Requirement X due on 18.01.2012
    Output firmed planned order Y with 3 activities (A1, A2, A3), A2 beeing fixed
    Optimization result with a Backward scheduling strategy:
    A1 09.11.2011
    A2 18.11.2011
    A3 17.01.2012
    Optimization result when Backward scheduling setting is unchecked
    A1 NOW
    A2 18.11.2011
    A3 17.01.2012
    The business requirement we d'like to achieve
    A1 09.11.2011
    A2 18.11.2011
    A3 19.12.2011
    It is not foreseen to fix A1 to bypass the problem, above example is only a basic example whereas there're multiple activities in between A1 & A2 in our real material PDS. Is there any way (even with another optimization run, or using in combination a Production Planning Run...) to achieve such a scheduling strategy?
    BR,
    Pascal.

    Hi,
    To add further and to more precise, the issue is:
    In CM01[or in any capacity evaluation tcode], In a particular maonths load[Period] the opeartion from different month is showing up.
    For example: if Period[month] 06 is veiwed of a Workcenter load, a line[load appears], whose earliest date is in 7th month[01.07.2014].
    I expected to see, only Workcenters scheduled in 6th month to show up in the load evaluation.
    Please look at the screen shot.
    Regards,
    Avinash

  • Collective Planned orders Scheduling for lower level orders with reference to the Superior order

    Hi All,
    Collective planned order scheduling.
    I have been trying to reschedule the superior planned order and i was expecting the lower level planned orders to reschedule based on the superior planned order.
    My problem is
    when i try to reschedule the superior planned order the system is not rescheduling the lower level planned orders.
    For example if i change the basic finish date of superior planned order as 30/09/2014 and reschedule the planned order it is only scheduling the header planned order and the lower level planned order is not scheduling.
    Could some one tell me why this is not happenning at planned order level.
    As the rescheduling of collective order will work at production order level but for some reason it is not happening at planned order level(as there is no option available to do so).
    Please give your thoughts on this asap.
    Mahee.

    Hello Mahee
    Please observe that your system is working as designed. Planned orders are scheduled independently, even when they are part of a network/collective order. Note 152319 explains the planned order scheduling in detail and it provides the following information:
    * No scheduling of overall networks is executed although a directly manufactured component is assigned.
    Note that no scheduling of the overall network is executed for planned orders. For the components requirements dates are determined. In order to cover them, planned orders are created in the next MRP run. Since the requirements are not managed using the exact time, the results of the planned order scheduling and of a scheduling of the overall network of the converted collective order can differ.
    BR
    Caetano

  • Co40 scheduling problem

    Dear experts,
    I changed my factory calendar all 7 days of the week as working days. I can create planned order in Sunday. But when I create the production order with co40, the scheduled date is taken into Saturday. However I can create production order in Sunday manually. What could be the problem with co40.

    Hi,
    From your question there are two points. One is system creating P.R on 10th sep and rescheduling.
    Second is why is not created  47 days before?
    1. 10th sep system rescheduled P.R. This P.R is not generated by MRP run. This P.R is created by manually. Thats why system proposed to rescheduled to 8th sep.
    2. To get P.R 47 days before the date of F.G requirement, do the following setting:
    Use tcode OPU5 - Define scheduling parameters for planned order. Select your plant, order type & prod scheduler.
    Make tick mark in Start date in the past and input no of days.
    In Adjust scheduling field, select - Adjust basic dates, adj dependent req to order start date.
    Now rerun MRP by Delete & recreate planning mode by MD02 screen. Check the result.
    Regards,
    Dharma

  • PS Scheduling with subnetworks (PM orders)

    Hello all,
    I am currently working on a project where I am helping a client use Project systems to manange a plant shutdown.  The requiment is to schedule the many maintanance orders (300 +) using project systems to see the critical path and the to manage capacity of the work centers to fit into the time box for the shutdown.  I have set up a project down to the network activity level representing the high level process and have started linking PM orders through the additional data b tab, but I have a couple questions.
    1.)  When you create the link on the additional data B tab.  You get a pop up box that will automaticly derive the Project definition and WBS element.  Should you link it to all through or should you only select one of the PS objects.  What purpose does it serve to show all three or just one PS object?
    2.)  In terms of scheduling when i attach a PM order to a network and activity it will adapt the basic date of the network activity, however it does not change the day of the network activity to be the same period of the orders attached.  I am using buttom up scheduling on the network.  Example.  I have a network activity with a basic date and duration of 1 day.  If I attach a PM order which would require 3 days to complete the network still shows only 1 day.  When I reschedule the project should it change the dates on the parent objects? i can see the changed dates when I run a CN41 structure report, but if I look in planning board without the PM orders I don't see the true duration.
    Any help would be appreciated on this subject.  I am not a PM person.  Not sure if this is an issue with a control key.

    Hello,
    I think Abdul has answered your second question. As far as your first question goes, kindly note that the three fields in the Additional data tab serve a specific purpose:
    1) Project definition field is used only for reporting and is something that you will not change.
    2) The WBS field is derived from the network activity to which the PM order is being linked. Please note that this field is used to determine the special stock requirement i.e. the WBS from which the PM order will request reservation of goods provided the special stock indicator is used (this WBS can be changed for example a situation where you have done all procurement of the project on a central WBS as project stock and would like to re-direct all PM order reservations to this single WBS).
    3) The Network is used to link the actual PM order and is used to help schedule it in case the network dates change.
    Hope this clarifies.
    Regards,
    Syed Ammar Zaheer

  • I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE.  Having trie

    I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE.  Having tried this, I was met with a recorded message, in Arabic, and no options to speak to anyone.  I have found this process extremely frustrating and poor on your behalf.  Not providing any options to speak to an Adobe representative is equally annoying.  Please get back to me ASAP, as I need to use the product immediately.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.

    How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.

    In this forum, we can't help with purchasing issues.
    My suggestion is to call that phone number.

Maybe you are looking for