Scheduling tasks created in Oracle Projects

Is it possible to use Advanced Scheduler/Field Service to schedule tasks created in Oracle Projects? How can I achieve this integration?

The only integration I know of for Projects requires Project Contracts and the use of deliverables.

Similar Messages

Why Dev Guide says "create a separate project for each ADF task flow ..."

Hi,
We have a BPM process application which is having a few human tasks. The form for each of the human tasks is similar. We’d like to be able to share some page fragments or code between them and create single web application to handle all the human tasks for this BPM process application. Then I found the following in the Oracle document “Developer’s Guide for Oracle SOA Suite 11g Release 1 (11.1.1.4.0)”:
“If the SOA composite contains multiple human tasks, create a separate project for each ADF task flow associated with each human task.”
I wonder if we have to do that and if so, what is the reason.
Do you have any clue? Please help.
Thanks a lot,
Helen

Hi Helen
1. I do not know the reason why they mentioned like separate project for each human task. NO, this is not required and we can have just one UI Project like MyTaskForms and have all the JSPs in this same project for each Human Task.
2. On our side, we have like 10 Human Tasks, all using the same Payload. So we have 10 .task file. For the very first .task file, we used Auto Generate Project and gave project name like OurAppTaskForms. The reason we did this is, so that it adds all the required dependent libraries, tag libs etc properly. For all remaining 9 .tasks file, we did NOT use auto generate. Instead we used standard New -> JSF From Human Task and select one task at a time and follow the steps. These steps are covered in the online documentation. At the end in our BPM App, we have just one UI Project with all the 10 screens.
3. ALSO, all the 10 screens have some common data. This we put in a reusable JSF Fragment page. And associated a custom Managed Bean for this to set and get values from this fragment and also some Actions for some buttons in the JSF. Then we included this JSF in each taskform jsf file, uisng the include tag. We added this include tag, somewhere in the top. So all screens share common jsf fragment page.
4. We can refine the above stuff further. As per above, we still have 10 JSF screens for each one of the 10 .tasks. Ofcourse all these 10 jsf have same common jsf fragment. BUT instead of 10 individual jsf screens, we can have only ONE Jsf screen also. Refer online docs for the details. The challenging part is, since we have only one jsf, there may be some bussiness stuff, validatoin stuff to take care of in custom ValidationCallback Handler classes. Say for Task1, we had to show some buttons, but NOT for Task2. So we had to handle this logic. Also in validation call back, we can always get each Tasks, title also. So we can workaround this issue also. We are in the process of doing this right now. But first 3, we already did and they are working fine.
My personal suggestion is first go with single jsf fragment and include in all tasks jsp files. Any changes to common elements need to make only in one place i.e fragment page.
Thanks
Ravi Jegga

CF 9 Upgrade process Ran All Scheduled Tasks

I just completed the upgrade process from CF8 Enterprise to CF9 Enterprise on our test system, Windows 2003 R2P2 using IIS6 and SQL Server 2000. I have no schedule tasks with an active schedule, but the upgrade process ran all of the tasks. Running all of the scheduled tasks created 200+ e-mails.
Any ideas on what happened? I ran the coldfusion_9_wwe_win.exe and installed the CF9 ODBC and CF9 SOIR services.
If this happened on my TEST system (with no actively scheduled tasks) what's going to happen when I upgrade my production system?
Thanks in advance for your time.
Libby

I can't answer your specific question (*), but I would seriously reconsider your approach of UPGRADING a CF server. Set up CF9 in parallel, and migrate the application/website across to it.
If you do an inline upgrade and it fails: you've got nothing to fall back on. If you to a "cross-grade", your working CF8 instance is still there as a fail-over, if anything goes wrong with the CF9 install.
Adam
(*) you might want to raise a bug report, though.

OIM - Scheduled Tasks - Validade/Enable

Hi All,
I am quite new to OIM, two days working with it, and I have some questions that seem to be easy to answer but I could not find it here, neither on the internet (or I am not using the correct keywords).
In our OIM environment we have some custom recon scheduled tasks, developed by oracle, and, as our internal processes with the targets are not working properly still, sometimes the scheduled tasks fail and when they fail they got disabled too. Most of the times they fail is because its input file, a CSV file coming from a target, is not there.
Based on it, my questions are:
1. I know there is a way to list all scheduled tasks and their status using the API, check this link: http://www.rameshgk.com/blog/2010/09/23/oim-scheduled-task-for-monitoring-other-scheduled-tasks/, but is there a way to do it by command line in Unix?
2. Is there a way, when the schedulted tasks got disabled due to a failure, to enable it automatically, via API or any other method, without the need to go to web client?
I was forgetting to comment one thing, unfortunately, I don't have access to the OIM database!
Thanks for your attention!
Regards.

You can execute the scheduled task from the command line and use the following API:
void updateScheduleTask(long scheduledTaskKey,
java.util.Map attributes)
throws Thor.API.Exceptions.tcAPIException,
Thor.API.Exceptions.tcScheduledTaskNotFoundException,
Thor.API.Exceptions.tcInvalidAttributeException,
Thor.API.Exceptions.tcAttributeMissingException,
tcAPIExceptionUpdates schedule task information based on the attribute that are passed to this method
Parameters:
scheduledTaskKey - the scheduled task key
attributes - a map of updated attributes valid attributes
•Task Scheduler.ClassName
•Task Scheduler.Disable
•Task Scheduler.Frequency Type
•Task Scheduler.Interval
•Task Scheduler.Key
•Task Scheduler.Last Start Time
•Task Scheduler.Last Stop Time
•Task Scheduler.Max Retries
•Task Scheduler.Name
•Task Scheduler.Next Start Time
•Task Scheduler.Retry Count
•Task Scheduler.Start Time
•Task Scheduler.Status
You can provide the Frequency Type and Next Start Time and then it should be picked up. Just like when you are in the design console and you have it set to run once and you clear the entries in the time and set it to the current one.
-Kevin
Please don't forget to give points where earned on helpful posts.

Task dependencies and scheduling in Oracle projects and project management

Am I correct in the belief that Oracle projects/project management does not have the ability to create, manage and track dependencies between tasks in a project ? And to achieve that micro level of planning I need to use something like Microsoft Project Integration ?

Gordon,
Project integration is the link between Oracle Projects and MS Projects.
If you want to define dependencies between tasks, MS Project is best bet
for you.
Cheers,
Gopal
[email protected]
www.sagss.com

Create new schedule task using OIM API

Hello,
Steps for setting up eclipse :
1)Create a new JAVA project.
2)Right click on your newly created JAVA project & select properties.
3)In Properties window select JavaBuildPath & select libraries tab.
4)Click on AddExternalJar's button & add jar files from lib,ext folders of OIM client installation.
5)Click OK.
CODE<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<package oimscheduler;
import java.util.HashMap;
import java.util.Hashtable;
import javax.naming.Context;
import Thor.API.Operations.tcUserOperationsIntf;
import Thor.API.Exceptions.tcAPIException;
import Thor.API.Exceptions.tcChallengeNotSetException;
import Thor.API.Exceptions.tcLoginAttemptsExceededException;
import Thor.API.Exceptions.tcPasswordResetAttemptsExceededException;
import Thor.API.Exceptions.tcUserAccountDisabledException;
import Thor.API.Exceptions.tcUserAccountInvalidException;
import Thor.API.Exceptions.tcUserAlreadyLoggedInException;
import Thor.API.tcUtilityFactory;
import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
import com.thortech.xl.util.config.ConfigurationClient;
public class Scheduler extends SchedulerBaseTask
     tcUtilityFactory ioUtilityFactory = null;
     @Override
     protected void execute()
          try
               System.out.println("Executing Scheduler.....");
               createConnection();
               createUser();
               System.out.println("Back In execute fn !!!");
          catch(Exception e)
               System.out.println("Error In execute : "+e.toString());
     public void createConnection()
          try
               System.setProperty("XL.HomeDir","D:\\Oracle\\OIM\\xellerate");
               System.setProperty("java.security.policy","D:\\Oracle\\OIM\\xellerate\\config\\xl.policy");
               System.setProperty("java.security.auth.login.config","D:\\Oracle\\OIM\\xellerate\\config\\authwl.conf");
               System.setProperty("java.naming.provider.url","t3://localhost:7001 ");
               System.out.println("Setting Configurations .....");
               System.out.println("Starting .....");
               ConfigurationClient.ComplexSetting config =
               ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
               System.out.println("Login...");
               Hashtable env = config.getAllSettings();
               env.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");
               env.put("java.naming.provider.url","t3://localhost:7001");
               ioUtilityFactory = new tcUtilityFactory(env,"xelsysadm","abcd1234");
          catch(tcAPIException ae)
               System.out.println("Error In createConnection:tcAPIException "+ae.toString());
          catch(tcChallengeNotSetException cnse)
               System.out.println("Error In createConnection:tcChallengeNotSetException "+cnse.toString());
          catch(tcLoginAttemptsExceededException laee)
               System.out.println("Error In createConnection:tcLoginAttemptsExceededException "+laee.toString());
          catch(tcPasswordResetAttemptsExceededException praee)
               System.out.println("Error In createConnection:tcPasswordResetAttemptsExceededException "+praee.toString());
catch(tcUserAccountDisabledException uade)
     System.out.println("Error In createConnection:tcUserAccountDisabledException "+uade.toString());
catch(tcUserAccountInvalidException uaie)
     System.out.println("Error In createConnection:tcUserAccountInvalidException "+uaie.toString());
catch(tcUserAlreadyLoggedInException uale)
     System.out.println("Error In createConnection:tcUserAlreadyLoggedInException "+uale.toString());
          catch(Exception e)
               System.out.println("Error In createConnection:Exception "+e.toString());
     public void createUser()
          System.out.println("<<< In createUser Fn >>>");
          try
               tcUserOperationsIntf moUserUtility = (tcUserOperationsIntf)ioUtilityFactory.getUtility("Thor.API.Operations.tcUserOperationsIntf");
               HashMap user = new HashMap();
               user.put("Users.User ID","OIM-API-SCH");
               user.put("Users.First Name","Oracle-SCH");
               user.put("Users.Middle Name","JAVA-SCH");
               user.put("Users.Last Name","SUN-SCH");
               user.put("Organizations.Key","1");
               user.put("Users.Role","Full-Time");
               user.put("Users.Xellerate Type","End-User");
               user.put("Users.Password","password");
               long l = moUserUtility.createUser(user);
               System.out.println("CreatingUser Done.....");
          catch(tcAPIException ae)
               System.out.println("Error In createUser:tcAPIException "+ae.toString());
          catch(Exception e)
               System.out.println("Error In createUser:Exception "+e.toString());
After writing above code ,we have to create jar file.
Steps To Be Follwed In OIM Design Console
1)Copy jar file in ScheduleTask folder of your OIM server installation.
2)Expand administration tree & select TaskScheduler.
3)Create new task & in class name textfield we have to mention package.classname & mention appropriate values in other textfields & execute it.
4)Check output.

We need to override 2 methods while extending from SchedulerBaseTask i.e
init() :- this method is run before execute by the scheduler .
execute() :- is executed by the scheduler.
Revised code :-
package oimscheduler;
import java.util.HashMap;
import Thor.API.Operations.tcUserOperationsIntf;
import Thor.API.Exceptions.tcAPIException;
import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
public class Scheduler extends SchedulerBaseTask
     tcUserOperationsIntf moUserUtility = null;
     @Override
     public void init()
          try
               System.out.println("In Init");
               moUserUtility = (tcUserOperationsIntf) this.getUtility("Thor.API.Operations.tcUserOperationsIntf");
          catch (tcAPIException e)
               e.printStackTrace();
     protected void execute()
          try
               System.out.println("Executing Scheduler.....");
               createUser();
               System.out.println("Back In execute fn !!!");
          catch(Exception e)
               System.out.println("Error In execute : "+e.toString());
     public void createUser()
          System.out.println("<<< In createUser Fn >>>");
          try
               HashMap user = new HashMap();
               user.put("Users.User ID","OIM-API-SCH1");
               user.put("Users.First Name","Oracle-SCH1");
               user.put("Users.Middle Name","JAVA-SCH1");
               user.put("Users.Last Name","SUN-SCH1");
               user.put("Organizations.Key","1");
               user.put("Users.Role","Full-Time");
               user.put("Users.Xellerate Type","End-User");
               user.put("Users.Password","password");
               long l = moUserUtility.createUser(user);
               System.out.println("CreatingUser Done.....");
          catch(tcAPIException ae)
               System.out.println("Error In createUser:tcAPIException "+ae.toString());
          catch(Exception e)
               System.out.println("Error In createUser:Exception "+e.toString());
Edited by: Rahul Shah on Jul 11, 2011 4:16 AM

Oracle Projects 11.5.10.2 : Generate Invoice at the lowest task level...

Oracle Projects: 11.5.10.2.
We are trying to figure out if we can generate an Invoice at the lowest task level. When I looked at the invoice format there was no option to group by at lowest Invoice level However I looked at one of the documents of project partners vendor and created an Invoice format option of lowest task. However I can not fund the project at lowest taks. When I go to the agreement I only see top tasks in the list of values?
Does any one know how to achieve /generate billing at lowest task level?
When I looked at the project type setup there is a billing option called funding level: This only gives two options top task and project level or both but not at lowest task.
any clue/help would be greatly appreciated.
The reason we are trying to do this is we want to pass a tax code at the lowest task level.
--Krishna

Hi
There is no way to fund the lowest tasks.
You cannot generate invoice with invoice lines per lowest level tasks, using standard functionality.
Assuming your billing is based on WORK, you could customize the Invoice Format to summarize RDL's by lowest task level.
However, if you need hard limit control by lowest task level you will need to capture the allocation of fund to tasks. That could be done on a revenue budget you maintain by lowest level tasks. In addition, develop billing extension called during GDI that will perform the fund check for each task.
Dina

Problem creating OIM 11g Custom Schedule task

hi,
i am creating custom schedule task in oim . while importing scheduletask metadata xml getting follwoing error.
Problem invoking WLST - Traceback (innermost last):
File "/app/Oracle/Middleware/Oracle_IDM1/server/bin/weblogicImportMetadata.py", line 21, in ?
File "/app/Oracle/Middleware/oracle_common/common/wlst/mdsWLSTCommands.py", line 268, in importMetadata
File "/app/Oracle/Middleware/oracle_common/common/wlst/mdsWLSTCommands.py", line 727, in executeAppRuntimeMBeanOperation
File "/app/Oracle/Middleware/oracle_common/common/wlst/mdsWLSTCommands.py", line 697, in getMDSAppRuntimeMBean
UserWarning: MDS-91002: MDS Application runtime MBean for "OIMMetadata" is not available. "importMetadata" operation failure.
can any one help me.
Thanks in Advance.

Do the following:
From the oracle home (oracle_idm1) run the command <ORACLE_OIM_HOME>\common\bin\wlst.cmd
Run the connect() command and connect with the weblogic user to the to the oim managed server (port 14000)
Use the following command change your from location to the directory where your files are at. The location should be one folder up from the base "db" directory : importMetadata(application='oim', server='oim_server1', fromLocation='e:/files', applicationVersion='*')
-Kevin

How to create scheduled task to delete failure/open tasks

hi.
I have a question that I hope someone can give me some input to.
we have an OIM 9.1.0.1 installation and have a situation where we have around 14 500 open tasks. we read somewhere that this might cause performance issues. we have also found a HOWTO on Oracle Metalink that explains how to delete these tasks. i states that one should:
- Create a scheduled task which uses the API:
Thor.API.Operations.tcProvisioningOperationsIntf.setTasksCompletedManually
...and that's it. it doesn say anything else. doing this by creating a scheduled task in OIM Admin Console will not work since we don't have this Java class. is there anyone who has sort a similar problem? any help/tips/guidelines are appreciated.
P.S.: The Oracle Metalink HOWTO:
Link: [https://metalink.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(from=BOOKMARK&bmDocType=HOWTO&bmDocDsrc=KB&bmDocTitle=How%20to%20%3Cb%3EDelete%3C/b%3E%20Failure%20or%20Cancelled%20%3Cb%3ETasks%3C/b%3E%20in%20%3Cb%3EOpen%3C/b%3E%20%3Cb%3ETasks%3C/b%3E&bmDocID=731282.1&viewingMode=1143))]
Edited by: user10378227 on Oct 27, 2009 1:07 AM

Use this link:
How to create a new schedule task from java code
http://download.oracle.com/docs/cd/E10391_01/doc.910/e10361/tasks_archival.htm#sthref85

Creating a Scheduled Task using PowerShell v4

So here is my question. I'm trying/wanting to create a scheduled task using PowerShell v4 on Server 2012R2. I want to task to run on the 1st day of every month. The parameter for -Monthly -Day is not available. I need to use PowerShell
to create the Scheduled Task because the Task will be running with a group Managed Service Account credentials so the Scheduled Task can not be created via the Task Scheduler GUI.
Thanks in Advance

Here is a functioning task It can be easily edited in PowerShell or in notepad to alter the timing
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.1" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Author>W8TEST\user01</Author>
</RegistrationInfo>
<Triggers>
<CalendarTrigger>
<StartBoundary>2014-06-04T21:31:32.0459499</StartBoundary>
<Enabled>true</Enabled>
<ScheduleByMonth>
<DaysOfMonth>
<Day>1</Day>
<Day>12</Day>
<Day>24</Day>
</DaysOfMonth>
<Months>
<January />
<February />
<March />
<April />
<May />
<June />
<July />
<August /
<September />
<October />
<November />
<December />
</Months>
</ScheduleByMonth>
</CalendarTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<RunLevel>LeastPrivilege</RunLevel>
<UserId>W8TEST\jvierra</UserId>
<LogonType>InteractiveToken</LogonType>
</Principal>
</Principals>
<Settings>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<Exec>
<Command>notepad.exe</Command>
<Arguments>test.txt</Arguments>
<WorkingDirectory>c:\temp</WorkingDirectory>
</Exec>
</Actions>
</Task>
I have edited and reloaded the XML many, many times. It works very nicely.
¯\_(ツ)_/¯

CcmEval Scheduled task not being created with "Access Denied" error 0x80070005 only on XP machines

Before coming on here I checked out http://social.technet.microsoft.com/Forums/en-US/ddbfe6c3-ee54-4b2a-a3a7-a6515d974f76/client-check-failed-on-xpserver-2003-systems-onlyccmeval-is-not-being-scheduled?forum=configmanagerdeployment (GPO
to allow scheduled tasks by users) and another thread about a hotfix that seems to be pre-XP SP3 and pre-CM 2012 R2.
That said, I'm having an issue many seem to have, but I can't find the answer. From what I understand SCCM uses the user context to create the CcmEval task, but in XP users cannot set a task to run as any other user (ie SYSTEM in this instance) so what is
the workaround? I can't just give users Administrator permissions to install the client.
The exact log entries are:
<![LOG[Client evaluation task doesn't exist.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356" file="ccmevalcheck.cpp:705">
<![LOG[Client evaluation task is not found or is disabled or is not compliant, perform remediation]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2"
thread="4356" file="ccmevalcheck.cpp:341">
<![LOG[Attempting to recreate client evaluation task.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="1" thread="4356" file="ccmevalcheck.cpp:833">
<![LOG[Task scheduler 2.0 is not supported, peform task registration with 1.0 API.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="1" thread="4356"
file="ccmevaltask.cpp:345">
<![LOG[Failed to delete task Configuration Manager Health Evaluation (0x80070002).]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356"
file="ccmevaltask.cpp:379">
<![LOG[Failed to create task item (0x80070005).]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="3" thread="4356" file="ccmevaltask.cpp:387">
<![LOG[Failed to create client evaluation task.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356" file="ccmevalcheck.cpp:850">
The bolded section is what's telling me it's Access Denied, and manual creation of any program task set to run as SYSTEM tells me the same- users cannot do this; only admins can.
What can I do?

So after sifting through some RSOP results and GPO objects I found a policy that wasn't necessarily prohibiting creation of them. (Not where you think it would be - under
Administrative Templates > Windows Components > Task Scheduler > "Prohibit New Task Creation" -
this was set to allow them) but this one I found was a File Permissions policy that set SYSTEM permissions to READ and EXECUTE.
I've changed this to FULL CONTROL for SYSTEM. I'm unable to get on the machines to examine everything closely, but from what I can see at least one of them has remediated themselves and now has a successful client check in the console. Hopefully the rest
of them will come around as GP updates itself and the client does an evaluation to remediate the Scheduled Task.
Hopefully this helps someone in the future as well.

Not able to create Schedule Task in OIM 9.1.0.2

Hi,
I created one Java program and created Jar file. Then placed in Schduled Task folder.
When I try to create one Schedule Task in OIM web console, I am not able to see the Class File name in the list.
Please let me know what could be the reason for this.
Thansk for your help.

In OIm Web console, there is one serach where we can serach the required class file. I am not able to see the class file in the list where as I am able to see other class files for other scheduled Tasks.
But I am not able to see my Class file.
When I try to paste the full class file path in Design Console, It gives an error saying No database read.
This is very urgent for me to create the scheduled Task.
Any idea??

How to create trial version in oracle project

assalamualikum and hi ..
sir how to create trial version in oracle project
i want to
anyone use my oracle (forms) project for some limited time..
and then expire after some time..

ummm...you test it using the UTL_FILE package.
BTW...you can also spool text files out of SQL*Plus on your local machine, without even needing UTL_FILE. but if you need to create files on a server, then UTL_FILE is the way to go.

Project Server 2013 - Approved Tasks not applied to Project Schedule

Environment Details: Microsoft Project Server 2013 SP1
When an Resource completes a tasks within the Task or Timesheet page at the end of each day, the tasks is routed to the Project Owner for approval. The Project Owner (Project Manager) approves the task. During this process no errors are displayed.
When the Project Owner (Project Manager) goes into the Project Professional 2013 client to view how the project is progressing, and update the project completion date, the updates is not applied to the project.
This worked for some time, but has recently stopped working with no changes made to the environment. Any help would be great, as our project manager's are manually updating the tasks prior to approving them so they can report back on the project each week.

Hello ProjMgrMatt
Sounds pretty serious, but I think something is missing somewhere.
Make sure that the Status Manager field is the same as the Project Owner.
Check to queue to be sure that nothing is stuck and waiting.
Create a new project, publish, submit, approve, etc and see if it still happens.
Cheers!.
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Creating a scheduled task to sync phone's using PC...

I have two NOKIA (bluetooth) Phones and want to create a scheduled task to synchronise their agenda to outlook without user involvment. Using PCSync2 and some batch file I can get the synchronisation to work.
One problem however remains. When both telephones are connected then a "phone selection" window appears. You have to manually choose which telephone to use. This makes the scheduled (automatic) task to wait for user involvment.
I have two questions:
1
are there any commandline parameters or registry settings to make clear which telephone to use during the next sync, and the selection window not to appear?
2
Are there any commandline parameters or registry settings to have PC Suite think that just one telephone is present (that the second one is temporary inactive or switched off). Then again the selection window would not appear.

Here is a functioning task It can be easily edited in PowerShell or in notepad to alter the timing
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.1" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Author>W8TEST\user01</Author>
</RegistrationInfo>
<Triggers>
<CalendarTrigger>
<StartBoundary>2014-06-04T21:31:32.0459499</StartBoundary>
<Enabled>true</Enabled>
<ScheduleByMonth>
<DaysOfMonth>
<Day>1</Day>
<Day>12</Day>
<Day>24</Day>
</DaysOfMonth>
<Months>
<January />
<February />
<March />
<April />
<May />
<June />
<July />
<August /
<September />
<October />
<November />
<December />
</Months>
</ScheduleByMonth>
</CalendarTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<RunLevel>LeastPrivilege</RunLevel>
<UserId>W8TEST\jvierra</UserId>
<LogonType>InteractiveToken</LogonType>
</Principal>
</Principals>
<Settings>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<Exec>
<Command>notepad.exe</Command>
<Arguments>test.txt</Arguments>
<WorkingDirectory>c:\temp</WorkingDirectory>
</Exec>
</Actions>
</Task>
I have edited and reloaded the XML many, many times. It works very nicely.
¯\_(ツ)_/¯

Scheduling tasks created in Oracle Projects

Similar Messages

Maybe you are looking for