Schema already exit eroor during FDM application creation

Hi,
I have done the installation and configurqation of FDM, when i am trying to create new application it is throwing an error SCEMA ALREADY EXIT.
Can some one clarify me, when every we go for new application it should have new scema?, because i used this scema to create new application, it went wrong due to invalid path, but it created some objects in the scema.
thanks,
msr

As SH said, you do need a separate schema (Oracle) or database (SQL server) for each application.
Usually when application creation fails the main thing that happens is FDM creates the application folder structure which you specified the location for in the first tab -- that named application structure e.g. MYFDMAPP must be removed from that file share before you can re-create the application if your DB credentials were incorrect.
Regards,
John A. Booth
http://www.metavero.com

Similar Messages

FDM application creation Issue

1.we are using ERP Integrator for data EBS to Planning ,in selected metadata is classic and data also classic.
my question is,In this scenario also need FDM application creation(workbench client or web)?
2.we are using application server for only EPM(Hyperion),and dataserver for only DB(oracle).
is it possible to use FDM application creation(workbench client or web) in my application server env.,?(as per fdm_config doc. Note:Highly recommended on dataserver)
please any solution..

While configuring HFM adapter, I am getting error as " ONe of the specified objects can not be found"
Edited by: user8904966 on Jan 19, 2012 2:56 AM

Unable to connect to Database Error in FDM application creation

Hi All,
I have Installed Financial Data Quality Management 11.1.2.2 in my machine. Database [Oracle 11g R2 64 bit] and client[Oracle client 32 bit] also installed in the same machine.
We selected the following components while installing Oracle client[Custom installation],
Oracle Objects for OLE
Oracle Data Provider for .NET
Oracle Providers for ASP.NET
Oracle Provider for OLEDB
Complete the install.
When I tried to create FDM application it throws me the following error. Unable to connect to Database. Please check the database information and verify the database is accessible.
Kindly guide me to overcome this issue.
Thanks and Regards
Sai

Hi Sai,
first of all, you have posted FDM issue in Essbase forum. Thats the reason you didn't get replies to this issue.
To resolve this, we need to Oracle Client 32 bit first then Oracle Client 64 bit.
Install Oracle Clients completly. (As per documentation, we need to install Clients completly. Means choose Administrator, not instant client and custom)
After installing also if get same error, Goto Environment variables, Edit PATH variable and copy the 32 bit Client path to the first in the PATH variable.
Then reboot the Server and try again to create FDM application.
Thanks,
mady

FDM Application Creation

Hi
Is it necesseory to Give User Name OF FDM Schema (Database Tab) in Capital Letter when we are creating New Application in FDM.
Why i am ASking this Question
When we are trying to import Data into FDM using ERPi i am getting Table or View Does Not Exist Error . IF we give FDM Schema User Name Small Letters it creating a Queru with Small Letter with in Double Quotes like "fdmdev". <Table Name>. This is My Assumption.
This is Error because of Import Data from ERPi Tables to FDM Tables.
Please give your Valuable Suggetion to Resolve this.
Thanks in Advance
Nagarjuna Reddy

The Case that was used to create the user ID by the Oracle DBA should be used, it must match in order for the connection to the DB at import for ERPi to run successfully.

EXIT to change / add line items during STO PO creation in T.Code ME21N

Hi
Can somebody suggest me a EXIT or a BADI to change / add line items during STO PO creation in T.Code ME21N.
The requirement is as below.
When the user enters a material no ( which has a BOM created in CS01), and presses enter or saves the PO, i need to get the sub components of the BOM and populate them as the next line items.
This is because the user needs to create the delivery with reference to the PO. In the delivery, the BOM material needs to be populated with all the sub components of the BOM.
I tried to do it using EXIT_SAPMM06E_013 in which i am able to change / add the line items in the XEKPO and YEKPO internal tables. The entries are available in the internal table when the EXIT is executed.
But when the PO is posted internally, the item is not changed/added.
Thanks in advance.
Guna.

Hi,
Try BADI "ME_PROCESS_PO_CUST".
cheers,

Passing application version info during .jar/.class creation

Is there a 'best' way to supply version info during the application build process so that it is then available at runtime? I use make to build a jar file that then is released. I'd like to be able to provide a release/version number when I build that the user can then access via an 'About' dialog. In 'C', I use preprocessor directives passed via the make command line but I can't see how Java might support this method. Any and all help appreciated...
Thx, Jennette

An Ant script might do stuff like that.

Re-importing FDM application from XML not removing deleted objects/records

I migrated our FDM application from one environment to the next environment, by exporting the FDM application from the source environment to an XML file and subsequently importing the FDM application XML file in the target environment. This appeared to work fine.
After some updates were then applied to the source environment, I re-exported the FDM application to an XML file, and re-imported this in the target environment.
However, I have noticed that:
- Import Scripts that were deleted in the source application still remain in the target application.
- Mappings that were deleted in the source application still remain in the target application.
- Extra mappings that were added in the source application have been added to the target application.
So we now have duplicate mappings in several tables and scripts that should have been deleted in the target environment!
It appears that the "Import" process is more of an update, rather than a drop and replace. There is no "replace" option on the import process. Can anyone please advise how one should correctly migrate an FDM application between environments? At present, it seems to me that the whole application will need to be completely dropped/deleted (including the SQL database/Oracle schema) and re-imported all over again from scratch.
Surely there must be a better method?!!

Here is Oracle's response for anyone else who requires further information on this:
"Hello,
The Import of the .xml files in terms of application creation is meant as a 'once only' event and a result is not meant as a method of post-create administration of the application. Any further imports will just add metadata to the application not replace or merge. If you wish to migrate an application via this method then you will need to get the source application into the state required for the migration then migrate this as a whole. Please note that this will only migrate the metadata of the application.
The other method of migration as you have mentioned in the SR description, is via the database which will migrate the entire application with data.
Please see KB article 806173.1 which gives instructions on the two methods, both of which are the only recommended methods. Please review the article to suit your requirements.
Thanks"

Update VEKP-EXIDV2 during automatic HU creation from outbound delivery

Hi All,
I need your suggestion / input on following scenario.
When I create an outbound delivery and save it, an automatic Transfer Order is created and at the same time an HU is created for delivery.
Now, I want to populate the field VEKP-EXIDV2 ( HU header -- Handling Unit's 2nd External Identification) with a specific logic.
Can anyone suggest a suitable EXIT or BADI or Enhancement point where I can populate the field VEKP-EXIDV2 ?
Note: I have tried using EXIT_SAPLV51S_001 and also BADI_HU_MAIN, but it is not helping in my case.
Because it is called only when Transfer Order is created manually (LT03), but is not triggered when TO is created automatically after saving the outbound delivery.
Thanks & Regards,
Devendra

Hi Ankur,
I am not going into HU creation screen in VL02N. There is some setting on functional side to create the automatic TO and HU during outbound delivery creation.
When I save the delivery, an entry in HU header table (VEKP) gets created automatically. I want to populate the field VEKP-EXIDV2. But, the EXIT or BADI as mentioned in my previous post is not helping in this case.
I would appreciate if you can throw some light in resolving this problem.
Thanks.
Devendra

Multiple import formats in one FDM application....?

I wanted to know in my situation where there are 15 EBS Set of Books. whether it is possible to use only 1 FDM application to import all these data into my HFM application.
My ERPi application is like this :
1 source application that is EBS.
1 target application that is HFM.
15 EBS Set of books, for which i think i have to create 15 import formats in ERPi for each set of books. this also implies to the locations.
then I have to do the common period mapping and category mapping.
in the Data load Setup: I have to select each location and do the member mapping. create a data load rule for each location.
FDM Application:
i already have an FDM application which i am using to import data from EBS to HFM using ERPi, till now i have only used 1 set of books just to verify that everything is working fine. now as everything is working fine with the application, I want to add additional import formats in the existing FDM application to answer the import formats and locations created in the ERPi application.
Is it possible to do like this, if so then i need your assistance in achieving this task.
please put your comments in this regards.
Thanks,
Shantan Kommera

You can do this by specifiying the appropriate data load rule to be used by ERPi within Integration Option 1 in the location. This will kick off the data load rule you specify in ERPi that should be tied to the corresponding set of books in EBS.

Accoung Assignment tab is disable during shopping cart creation

Hi Gurus,
Ned your expert advice on this issue.
We are using SRM7.0 classic scenario. During configuration, under SPRO>Supplier Relationship Management>SRM Server>Cross Application Basic Settings>Account Asisgnment, we define Account assignment categories, define G/L account for Product Category and Account assignment Category and no entry under Maintain Local Accounting Data.
However during shopping cart creation, Account Assignment tab is disable. We cannot even add line item and throwing an error. We assigned therequired entries under PPOSA_BBP but still unable to complete the shopping cart.
Please advice how to resolve the issue.
Thanks.

Hi,
Have you enabled the 'default' checkbox?
Regards,
Nikhil

Can I create two different FDM applications in a single database?

Hi,
Atpresent we are using separate database (MSSQL Server 2008) for each FDM applications, now our databases have increased in numbers due to increase in number of applications.
Now we are searching for any possibility to use a single database for more than one different FDM applications inorder to reduce the new database creation numbers in future.
Any suggestions would be greatly helpful.
Thanks in advance.
Abdulla Javeed Hassan

Yes. Reduce the number of FDM applications you are creating. You can have multiple target system adapters in a single FDM application (i.e. a single database only required). There is no need to create a new application for each target system.

User Exit Triggered during Campus Management Student admission data created

Hi Exports,
This is jnana ranjan working as a campus management implementation project.
Here we are impl student admission process workflow and i want trigger my event through user exit. I am new in user exit please guide me how to find user exit for CM and how to implement this. If you have abap code for similar requirment then please send me through my mailid: [email protected]
Please help me this is urgent requirment for my University client.
Advance thanks you.
Regards,
Jnana

Hi,
Can any one please let me know the user exit triggered during campus management student admission data creation and .
Thanks ,
Jnana

Unable to create FDM application

Hi Gurus,
While creating FDM application receiving error as "Database User id and password is required for login".
There is firewall between FDM server and SQL server and the SQL port number is different instead of 1433. Also we have SQL instance.
I have configured SS, FR and workspace successfully, but unable to create FDM app.
All products are in the same server.
Provided the SQL db information as:
db servername\sql instance name
database name
db username and password.
Receiving the above error message on both workbench and web.
Please provide some solution for this issue, its urgent.
Regards,
Kamal

If you use a UDL file on the FDM application server with the same information provided in the application creation screen can you successfully connect to the SQL Server database?
If it is running on another port other than 1433 you will need to specify the port in the servername field:
servername\instance,port

How to ignore Assembly Scrap of MRP during Production order Creation

Hi All,
We want to ignore the Assembly Scrap maintained in MRP View during production order creation.
We are maintaining assembly Scrap for planning so we do not want to remove that.
Please let us know if any User exit is there during Production Order Creation.
Thanks,
Amit

Dear Amit,
Assume in CO01,once after entering the total order quantity the system proposes the scrap quantity field separately,now
remove this quantity for scrap field and press enter and once again adjust the total quantity and check for what quantity the
system is proposing the BOM components.
check whether this works for your requirement.
Regards
Mangalraj.S

BADI triggered during sales order creation

Hi,
Can any one please let me know the BADI triggered during sales oredr creation and sales order change.
Thanks

<b>BADI for VA01:</b>
ALV_SWITCH_GRID_LIST     ALV: Customer Exit for Switch Grid to Li
BADI_ISPS_GRANT     BADI for IS-PS Grant Management
BADI_SD_DMC_ORDER     BADI for Dispute and Collection Manageme
BADI_SD_DPBP     Extensions in SD for DP90 with Billing P
BADI_SD_DSD_ORDER     BADI for Direct Store Delivery
BADI_SD_MENUE_FM     Menu Enhancement for Fund Management (FM
BADI_SD_MENUE_TPM     Menu Enhancement for TPM Retrofit
BADI_SD_SALES     General Enhancements for Sales Order Pro
BADI_SD_SALES_BASIC     Enhancements for Sales Order Processing
BADI_SD_SALES_ITEM     Enhancements for Sales Order Processing
BADI_SD_TAB_CUST_H     Tab Page for Own Details - Header Detail
BADI_SD_TAB_CUST_I     Tab Page for Own Data - Item Detail Orde
BADI_SD_TO_FM     Commitments Management in SD for Funds M
EHS_DG_002     EHS: Template Material Processing - Inte
EHS_PS_002     EHS: Call Report Information System from
EHS_PS_002     EHS: Call Report Information System from
EHS_PS_002     EHS: Call Report Information System from
SD_COND_ACCESS_A     Access in Pricing (replacement)
SD_KONV_SELECT     Addition to Data When Reading KONV
SD_PRICING_COPY     Enhancement for Copying Document Conditi
VBX_SO_SEL_CRITERIA     Batch Selection Criteria in Sales Order
<b>BADi for VA02</b>
ALV_SWITCH_GRID_LIST     ALV: Customer Exit for Switch Grid to Li
BADI_ISPS_GRANT     BADI for IS-PS Grant Management
BADI_SD_DMC_ORDER     BADI for Dispute and Collection Manageme
BADI_SD_DPBP     Extensions in SD for DP90 with Billing P
BADI_SD_DSD_ORDER     BADI for Direct Store Delivery
BADI_SD_MENUE_FM     Menu Enhancement for Fund Management (FM
BADI_SD_MENUE_TPM     Menu Enhancement for TPM Retrofit
BADI_SD_SALES     General Enhancements for Sales Order Pro
BADI_SD_SALES_BASIC     Enhancements for Sales Order Processing
BADI_SD_SALES_ITEM     Enhancements for Sales Order Processing
BADI_SD_TAB_CUST_H     Tab Page for Own Details - Header Detail
BADI_SD_TAB_CUST_I     Tab Page for Own Data - Item Detail Orde
BADI_SD_TO_FM     Commitments Management in SD for Funds M
EHS_DG_002     EHS: Template Material Processing - Inte
EHS_PS_002     EHS: Call Report Information System from
EHS_PS_002     EHS: Call Report Information System from
EHS_PS_002     EHS: Call Report Information System from
SD_COND_ACCESS_A     Access in Pricing (replacement)
SD_KONV_SELECT     Addition to Data When Reading KONV
SD_PRICING_COPY     Enhancement for Copying Document Conditi
VBX_SO_SEL_CRITERIA     Batch Selection Criteria in Sales Order
Regards,
Nilesh

Schema already exit eroor during FDM application creation

Similar Messages

Maybe you are looking for