SCOM 2012 Console not responding when the server to be connected is down.
SCOM 2012 Console hangs when the server to be connected is down or gone (e.g. lease replaced). How to change the 'connection server' to point to a valid server without re-installing SCOM Console? Thx
To enable high availability for your Operations Manager Data Access service, you can use Network Load Balancing (NLB)
PLz refer: http://blog.coretech.dk/kra/how-to-make-operations-manager-2012-rc-scom-2012-fault-tolerance/
Faizan
Similar Messages
-
BizTalk Admin Console not responding when loading configuration
Hi All,
I have a BizTalk 2013 R2 test environment which has separate BizTalk and SQL servers.
Due to something went wrong with the BizTalk server so I built another BizTalk
server and joined the same BizTalk group and I also moved the master secret
server to the new BizTalk server. I removed the old BizTalk server from the
group and shut the old server down.
But when I am using the new server to load the configuration for any receive or send ports,
the MMC gave me the "this snap-in is not responding" alert and if I canceled the alerts a couple of times, the configuration info can be loaded.
The admin console is fast when not loading configuration though.
Does anybody have any ideas what could be wrong?
Thanks,
David
DavidThis issue could be because of many reasons. Work on the below pointers.
1) I would suggest you to start with performing BizTalk Repair to avoid any registry issues, because in most of the cases Admin console related issues are solved by BizTalk repair only.
2) Check if SQL Server and MSDTC service is running properly.
As a Last option collect DebugDiag logs and try to analyze the same.
https://www.microsoft.com/en-us/download/details.aspx?id=42933
Check the below articles as well.
http://blogs.msdn.com/b/biztalknotes/archive/2014/02/20/biztalk-server-admin-console-fails-to-launch.aspx
http://support.microsoft.com/en-us/kb/2449532
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful. -
Hiya
We've just pushed all updates from the March patch Tuesday Security Bulletin to our test Workstations/Servers (using SCCM 2012 R2)
One of the patches (MS14-013 - KB2929961) hasn't applied to a selection of 2008 R2 and 2012 Servers, but according to the Bulletin notes for this it is applicable to both. It has applied to my Windows 8 boxes.
The servers don't already have this applied, its not a superseded update and SCCM has flagged this as "Required" for x64 versions of Windows 7, Windows 8, Windows 8.1 but "Not required" for any servers.
Bulletin ID states its applicable to all except Itanium based editions - https://technet.microsoft.com/en-us/security/bulletin/ms14-013
If I download the update and try to run it manually on the servers I get "The update is not applicable to your computer"
So it looks as though the WUAgent and SCCM compliance are reporting correctly, but that the Bulletin ID isn't entirely correct??
Has anyone else found this? We use the Bulletin IDs for monthly meetings on what we're patching and what system it will affect so causes a lot of confusion with system owners when a patch doesn't apply that they're expecting to get applied.
Thanks!Hi,
Without any indepth investigation if I am not mistaking the update is for Directshow and that component is installed with the Desktop Experience on the server OS's, and therefor the update is not applicable on the servers..
Could that be the case?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Rollback is not working when "The server threw an exception" error
Hi
These are my transaction steps
1) Call the StartTransaction method of the company object (Function AA)
2) Add Goods Issue (Rollback if error occurs) (Function BB)
3) Create record with oRecordSet object (Rollback if error occurs) (Function BB)
4) Add Journal Entry (Rollback if error occurs) (Function CC)
5) Add Goods Receipt (Rollback if error occurs) (Function DD)
6) Create record with oRecordSet object (Rollback if error occurs) (Function DD)
7) Call EndTransaction (with commit) to complete the whole process (Function AA)
These are working fine usually.
But problem is when user has "The server threw exception" error message.
Whole transaction must be rollback but still step 2 and 3 records are exist on DB.
Rollback is working fine with another error messages.
I programmed call Rollback transaction if calling function has any error.
Function BB, CC and DD are calling from Function AA.
I never have "The server threw an exception" error on my development machine with B1 2005 PL 51.
This is happened only LIVE server with B1 2005 PL 51.
B1 was upgraded from PL29 to PL51 recently becaseu of Locking issue.
Then Locking issue was solved but have "The server threw an exception" error and rollback is not working properly.
I hope someone can help me!!!!.
Thank you
2) & 3) stepsHi Joanne,
There are 2 things to check here.
1. is the Transaction
2. is the RPC_E_SERVERFAULT.
for the first one,
in step 2, just before you add the Good Issue, can you try to check first if you are still in a transaction ?
Just to make sure.
If it is, maybe you should open a ticket to SAP support.
BTW, Which version is your Live environment ?
for the second one,
try to search the error in this forum. there is a lot of posting about this.
The problem might also go away if you upgraded your SBO.
Please search and see if there is anything the same with your problem.
Regards
Edy -
The update server is not responding. The Server might be offline temporarily, or the internet or fir
I have tried everthing to get the updates to automatical update nothing seems to work has any got anything, miniport driver but windows 8 does not have this installed I have tried the logfile
What and how exactly are you trying to update?
-
I touch the Chrome app icon on my Droid and a Verizon message comes up. It asks me to confirm my email address as shown on the screen, and has a field for entering my billing zip. When I do so, it flashes as if processing but comes right back to the same screen with the zip code field empty. I went on line and confirmed that all info in my profile was correct. Anyone out there with the same problem and/or help?
Lets get to the bottom of this, Dwix! I personally use the Google Chrome application and love it. I am confident that we can figure it out together. Did you just start using the application? Have you had this message pop-up before? You mentioned that it is a Verizon Message, does it come in a form of a text message? Is it possible for you to send us a screenshot of this message?
Please share the details needed so that we can better assist!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport -
When I open Firefox, it goes to the first page I open, but then stops and says "Not Responding" with the mouse cursor spinning. I hit the close button and it says Windows is searching for a solution (which doesn't come).
When I open Firefox again, it says:
Well, this is embarrassing.
Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
You can try:
Removing one or more tabs that you think may be causing the problem
Starting an entirely new browsing session
Any ideas? I gretly appreciate any help. Thanks!!What is that first page?
Can't you open any web pages in Firefox?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here? -
Hello,
I am running Snow Leopard Server 10.6.8 and my clients are Lion 10.7.4. While testing I had no issues binding 10.7.4 to our 10.6.8 server's OD. I created a 10.7.4 image to push to all of our machines and in the beginning of last week I was able to push the image and get the machines to bind with OD and apply preferences on these machines through workgroup manager. Towards the end of the week though this stopped working. Now any time I bind a 10.7.4 client to OD it allows me to perform an authenticated bind and the machine shows up in workgroup manager but immediatley after binding the client the status jelly next to the OD server in the directory list is red and says "This server is not responding". If I reboot the client I get a notification that "Network accounts are unavailable" at the login screen. My preferences from workgroup manager are also not applying, which is my main concern because without workgroup manager my mac server is somewhat pointless as we use it for very little else.
I've since tried to bind a snow leopard machine (10.6.8) and this still is working with a green status jelly. I've also built a lion machine from scratch, updated to the 10.7.4 combined update and am still getting the same issue where it shows the server is not responding when binding to OD. I then applied the subsiquent OS update after the 10.7.4 combined update but the problem still persists.
Is anyone else having this issue? Any help would help me keep my sanity.
Thanks,
DaneHave you had any luck finding a solution to this? The only thing I have found was to unbind and then bind without authentication. Any help with progress on your end would be appreciated!
Nick. -
"The server responded with an error.
Access to “Don Weist/Winhall” in “Work” in account “iCloud” is not permitted. The server responded: “403” to operation CalDAVWriteEntityQueueableOperation."
Does anyone know how to repair this problem. It just began happening today.
Thanks,
KenWe previously had a similar issue when migrating multiple accounts from MobileMe to iCloud. The issue was resolved by disabling and then enabling iCal sync through iCloud on our iMacs in System Preferences.
Always backup your calendar before troubleshooting (File > Export > iCal Archive).
The following steps are roughly from a Apple Support Community discussion.
Open iCloud in System Preferences.
Switch off (uncheck) iCal sync in iCloud System Preferences pane.
Backup iCal before doing this. You will need to remove calendar data.
Open iCal and verify the iCloud account is removed in the iCal preferences under accounts.
Close iCal, reopen System Preference and switch on (check) iCal sync in iCloud System Preferences pane.
Reopen iCal and verify the iCloud account is enabled in the iCal preferences under accounts.
At this point if the problem persists you might try completely signing out of iCloud and then signing back in. But remember to backup all related data (iCal, Contacts, Mail, Photostream, etc) before turning off iCloud sync! -
I can not access Calender.
Keep getting blocked by message.
The server responded with error.
Access to account "virgin net" is not permitted.
The server responded:
"403"
to operation.
CalDAVAaccountRefreshQueueableOperation.Please take each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
In the Internet Accounts preference pane, delete any calendar accounts you don't use.
If there's no improvement, delete all calendar accounts and add them back. With an iCloud account, all you have to do is uncheck and recheck the box marked Calendars & Reminders in the iCloud preference pane.
Step 2
You may be trying to access an invited event that you declined, or one that was rescheduled after you accepted it. The error message should give you a clue as to what it is. If the calendar is on iCloud, you can bring up the Calendar on the website and select
Show Declined Events
from the popup menu with the gear icon in the upper right corner of the page. The declined events will appear in gray, and one of them should match what's shown the error message. [Credit for this solution to ASC member Psi.]
Step 3
If you get the error when trying to accept an invitation in an email attachment, it's because the organizer didn't properly create the event.
Step 4
Follow the instructions in this support article. Modify as necessary for a calendar that's not on iCloud. -
Calendar is locked on my MAC.
I keep getting the message" The server responded with an error: Access to icloud is not permitted. The server responded 403 to oepration caldavmigrate to server queueable operation."
How do I recify?We previously had a similar issue when migrating multiple accounts from MobileMe to iCloud. The issue was resolved by disabling and then enabling iCal sync through iCloud on our iMacs in System Preferences.
Always backup your calendar before troubleshooting (File > Export > iCal Archive).
The following steps are roughly from a Apple Support Community discussion.
Open iCloud in System Preferences.
Switch off (uncheck) iCal sync in iCloud System Preferences pane.
Backup iCal before doing this. You will need to remove calendar data.
Open iCal and verify the iCloud account is removed in the iCal preferences under accounts.
Close iCal, reopen System Preference and switch on (check) iCal sync in iCloud System Preferences pane.
Reopen iCal and verify the iCloud account is enabled in the iCal preferences under accounts.
At this point if the problem persists you might try completely signing out of iCloud and then signing back in. But remember to backup all related data (iCal, Contacts, Mail, Photostream, etc) before turning off iCloud sync! -
I am running SL Server 10.6.8 and have a problem with only one iCal server account (mine). I am unable to delete a calendar that I created. I can rename it (was called "Home" and changed it to "Delete Me"). I can create new calendars and have one called "Home" and another called "Work" which I can also rename and delete without any problem. However, when I try to delete my original "Home" calendar, now called "Delete Me" it warns me that I will loose any appointments so I know iCal thinks there are events in the calendar otherwise it would not give that prompt. However, when I go to the year view and scan forward and back approx 20 years there are no events to be seen. I then confirm that I want to delete the account and then I get the following error with the option to "Ignore" or "Go Off-line"...
Access to account “NAME” is not permitted.
The server responded: “403” to operation CalDAVRemoveCalendarQueueableOperation.
If I ignore the calendar simply reapears and if I go off-line my calendar stops syncing and remains off-line until I try to take it back on-line at which time I get the above error again.
Any ideas how to fix this? I think it is because of this calendar I am unable to access my calendar via web as well. All other accounts on the server are able to but mine but going to eat this elephant one bite at a time and then resolve the ical web access afterwards.
Any help is greatly appreciated. Thank you.Found solution!!!!
After trying to delete the calendar "family" multiple times and reading through some threads... I was able to figure out that the "Family" calendar that we can't seem to delete is corrected to FAMILY SHARING. Here is what I did:
Went on my iPhone 5S
1.Go to Settings
2. Scroll down to iCloud; and click on it
3.Click on "Family"
4. Click on your name at the top (has to be the organizer, i think)- I was the organizer so it worked
5.Stop Family Sharing
6. Stop Sharing
Now you can go to your calendar app and delete it! here is how in case you don't know
1. Click on Calendar app
2. Click on the word "Calendars" in middle of screen
3.Click on "Edit" at top left hand corner of screen
4. Scroll down to the calendar you want to delete and click on it
5. Scroll to the bottom of the screen and click "delete calendar"
DONE!!
If you are using your calendar on a mac like I was.... hence why it took sometime to figure this out. You have to stop family sharing from iPhone (if you can do it on the mac- more power to you, I didn't try figuring that out) and then you can go on your mac (if your connect to WI-Fi):
right click the calendar you want to delete,
select delete and it should go away!
yay!! hope this helps!! -
I am receiving an error message:
"Access to “DDRC-Computer Class” in “Birthdays” in account “iCloud” is not permitted.
The server responded:
“403” to operation CalDAVWriteEntityQueueableOperation.
Revert to server /Go offline.
When I click revert to server the screen goes back to the same error message. When I click go off line the error message disappears, but none of my calendar appts. sync with my other devices.We previously had a similar issue when migrating multiple accounts from MobileMe to iCloud. The issue was resolved by disabling and then enabling iCal sync through iCloud on our iMacs in System Preferences.
Always backup your calendar before troubleshooting (File > Export > iCal Archive).
The following steps are roughly from a Apple Support Community discussion.
Open iCloud in System Preferences.
Switch off (uncheck) iCal sync in iCloud System Preferences pane.
Backup iCal before doing this. You will need to remove calendar data.
Open iCal and verify the iCloud account is removed in the iCal preferences under accounts.
Close iCal, reopen System Preference and switch on (check) iCal sync in iCloud System Preferences pane.
Reopen iCal and verify the iCloud account is enabled in the iCal preferences under accounts.
At this point if the problem persists you might try completely signing out of iCloud and then signing back in. But remember to backup all related data (iCal, Contacts, Mail, Photostream, etc) before turning off iCloud sync! -
Access to account “iCloud” is not permitted.
The server responded:
“403”
to operation CalDAVRemoveCalendarQueueableOperation.It should synch despite the error messages, at least when you enter your appointments with iOS (iPhone, iPad) but I think (not sure) also when on OS X (Mavericks and Yosemite).
The very annoying 403 error messages (every few seconds) for a number of iCloud users are there since mid September. This is a month now !
This total iCal disaster is very clearly an error on the server side of iCloud. It works on the iCloud.com webpage though.
Don't waste your time and nerves searching for mistakes on your iMac.
tags: annoying, Apple is not meant for serious work, disaster, 30 days of disaster, iCal, iCloud, error 403,
CalDAVAccountRefreshQueueableOperation - Apple's iCal has become frustrating. Period.
Maybe you are looking for
-
Problem in viewing the Image in BLOB
Hi, I am using the Toad 8.0. I have one problem, I inserted approx 2.5 million records in one table say V_Images using the SQL Loader, there are few records in Table where image is not loaded properly. Approx 99% is done only 1% is having wrong data,
-
How to load 2 sub on QuickTime?
Hi mac experts how how, really how? I will appreciate for help this and i have bad language for load persian(farsi) sub on QT how fix it ? for end how load 2 sub (EN&PN) on QT Simultaneously tanx tanx tanx
-
I'm trying to recover some disk space on a machine that has an Oracle DB that is used by a single application. I believe I can do this by eliminating unecessary/unused schemas. There is a single schema devoted to the application so I'm not going to b
-
Cellphone-Roaming impossible with iPhone 4 after updating to iOS5.
After updating to iOS5 I'm unable to connect my iPhone 4 to a cellphone-network when in foreign countries (roaming), I only get a network in my home-country Germany? When trying to select a cellphone-network manually, it shows me all the available ne
-
Mac Pro being slow after Mavericks
We updated the Macs here at work to Mavericks recently with varying results. One of the computers is experiencing drastic slowdowns, especially while working in Creative Suit (CC). Info from EtreCheck: Hardware Information: Mac Pro (Early 2008)