SCOM 2012 - how to setup alerts for specific IT groups.

Hello everyone - I have seen a few similar questions but never any specific answers.
Our IT department is split up in teams. We have a Database team - Exchange Team - SharePoint Team - Web Team and others.
We currently run around 650 Servers for the department. Exchange team for example will need to get alerts off of their 12 Exchange servers. SharePoint team will need alerts off of say 22 servers and etc...
Is there "Anyway" to make sure they only get the alerts for their servers?
I recently setup a new group for our Web Team and they are getting SharePoint, Exchange, DPM and other alerts which they do not need to be getting. Also I have noticed from this that the SharePoint and Exchange teams are not even getting all their
alerts since apparently we had to refine them so much so as not to get other alerts (thus causing them to miss many). SCOM seems like a great package but it falls very short (from my limited experience with it so far) in being able to really customize
alerts for IT environments.
Can you enable a group to get all alerts for a specific group of servers?
SharePoint uses IIS, Database, Windows OS etc.... If I set it up for this it gets all IIS, Database servers when I only want them to see the 22 servers - if I restrict it down then they miss alerts. Sorry repeating myself now -
Thanks for any help.
Willis

Hi,
"Can you enable a group to get all alerts for a specific group of servers?"
Yes you can. In Authoring, Group, create groups with the servers, e.g create an Exchange Group with all 12 Exchange servers. In Adminstration, Notifications, Subcricptions, create a subscription and in the "raised by any instance in a specific group" select
the group (Exchange servers)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Email Alert for Specific Server Groups

We are using SCOM 2012 R2. We have windows server 2003 and 2012 servers.
I configured email alerts for this servers.
Criteria:
Notfiy on alerts
of a critical severity.
and of a high priority
and with New(0) resolution state.
I succesfully recieve alerts and emails from this configuration.
But i want to recieve email alerts from specific Windows Server 2003 servers or Windows Server 2012 servers.
I create a server 2003 and server 2008 group in scom.
I use "raised by any instance in a specific group" OR "raised by any instance of a specific class". I shutdown one of the servers. I can see alerts in scom active alerts section (hearthbeat alerts) but i cannot recieve emails about
this alerts.
If i use monitor rule (for example printer spool service rule) , I can recieve emails but it does not for work hearthbeats alerts.
I recently install Windows Server MP and Active Directory MP .

Create a group containing watchers/watcher groups for your servers and use this group in subscription filter. See this
post for more info.
Gleb.

How to setup alert for row count mismatch in replication

Hi All,
I noticed that in our environment there was a row count mismatch between the publisher and subscriber.Still the replication monitor was showing excellent.I reinitialized the replication to resolve the issue.
I want to set up alert row count mismatch alert between publish and subscrber tables before the client tells it to me.How this can be done?
Thanks!

There is an alert called - Replication: Subscriber has failed data validation - use that in conjunction with a validation.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

How to Configure alert for process failures

Hi Friends.
How to Configure alert for process failures due to any reasons like mapping, runtime exceptions .
I am devloping one scenario which is file to flatfile. In this scenario I am also using mail adapter for sending mail daily to admin that tells about record size and no of records parallely. I am not using BPM in this scenario.
I am having very little experience in XI.
Please answer this with clear steps so that I can do it.

hi,
check the links below for all the details and help on configuring alerts
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b - How to setup alerts for monitoring in XI 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 - Monitoring in XI 3.0
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - XI: Alerts configuration - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - XI: Alerts - Troubleshooting guide
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi

How to disable an alert for specific time period in SCOM 2012 R2

Hello,
Is there any option to disable an alert for specific time period in SCOM 2012 R2
Regards,
angs

No. But you can use the scheduler module in your rule or monitor, which will dictate when the workflow will actively run on the agent - hence disabling alerting for that time period.
http://msdn.microsoft.com/en-us/library/ff453828.aspx
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

SCOM 2012 - if it stops alerting how can I be notified

on occasions i have noticed that alerts have stoped coming into SCOM and we have had to either restart the managment server or at least restart services.
The problem has been that my team have not picked up on the fact it has stoppedalerting for several hours.I am looking for a simple solution so that someone gets emailed if SCOM stops giving out alerts, lets say for example SCOM hasn't had an alert for 3
hours.
Has anyone implmented a simple solution for this?
tamrep

If you monitor SCOM itself then a solution is to set the SCOM RMSE and the management servers as "Agentless" from some other SCOM Management group. This is how I used to monitor SCOM itself. This has been suggested by many SCOM experts too. Remember that
never install SCOM agents on the RMSE and MS, that can break your whole SCOM functioning.
You can install SCOM agents on your SCOM DB and DW, reporting server from any other SCOM group. That is fine.
This in my opinion is the easiest solution along with the one that I proposed above. I have been using these two solutions for long time now.
Hope this helps you too.
Thanks, S K Agrawal

WRT54GL V 1.1 : how to reserve IP for specific MAC address using DHCP

My !free! made in China router have this functionality. And yet I have been banging my head with this new reasonably expensive wireless router from Linksys. Anyway I lug my notebook around. I need my home router to be able to automatically configure notebook IP address using DHCP. At the same time I need the ip given by home router through DHCP to be the same IP all the time. So "static" ip is not the solution. Alternative "static" ip is also not a solution. Anything with the word "static" in it is not a solution. I know about third party firmware (wrt or tomato) and I know WRT54GL can be flashed with this third party firware. But I'm not going to void my warranty. This will be my last option but not the solution that I seek. I would like to know how to reserve ip for specific mac address using DHCP for WRT54GL V1.1. If this version have no way to make such configuration, I would like to know if there is official firmware upgrade that address this. Thanks in advance!

LDK-Anc wrote:
Tonik - For the life of me, I cannot find DHCP Reservation on the WRT300N. I'm currently configuring one and it would be really useful if I could fine it. Maybe LinkSys calls it something else, but I don't really see anything resembling it. Help!
Maybe these could help. (Images extracted from the User Guide)
Setup tab: Basic Setup
DHCP Reservation
Message Edited by denman_v2 on 03-25-2008 05:11 PM

How to setup variants for webdynpro report in ABAP? Help!

Hi Experts,
I have a webdynpro for ABAP report with selection screen.
How to setup variants for webdynpro report in ABAP?
Thanks
Gopal

Hi Gopal,
There is no concept of Variant in Webdynpro ABAP. But in our project we have some tool to do that. Its not release to the client I think. In my scenarieo, We create the Screen variant and program name will be supplied to the tool that will generate the ouput in PDF and Selection screen in One view. But the same is not avilable .
If you want the same concept in Webdynpro ABAP, you need to go for Dynamic programming only. This is the only option is avilable.
Warm Regards,
Vijay

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

Grid Control how to disable alert for Tablespace UNDO is 99 percent full

I am new to Grid control and want to know how to disable alert for UNDO tablespace full.
Target Name=xxxx
Target type=Database Instance
Host=xxx
Occurred At=Dec 24, 2010 1:21:00 AM EST
Message=Tablespace UNDOTBS1 is 99 percent full
Metric=Tablespace Space Used (%)
Metric value=99
Tablespace Name=UNDOTBS1
Severity=Critical
Acknowledged=No
Notification Rule Name=Database E-Mail Notifications
Notification Rule Owner=SYSMAN

You should post in the grid control foruma.
But just go to databases, select your database, metric and policy settings, find the tablespace metric, edit and exclude the undo tablespace.

Modification in me23n :for specific purch. group ,user can enter specific

Hi ,
I have to make modification in me23n that for specific purchase group ,user can enter specific matrial no .But I have never did anything before in standerd sap.So how I have to proceed in order to achieve this.
Regards,
Seema.

Hi,
This can be achieved using enhancements in SAP, which could be customer-Exits or BAdi implementations. I think this can be achieved using enhancement(Customer-Exit) MM06E005(Tcode-SMOD) function module EXIT_SAPMM06E_012.Here you have import parameter I_EKKO which will have purchase org and tables TEKPO which will ahve all lines so youc an add a custom check to validate materail based on purchase org.
Regards,
Himanshu

How Can I get Alert for specific error occurs in ULS logs ?

I am looking for either OOB functionality or Tool which could send me the email notification/Alert when specific error occurs in ULS Logs ? Please advice!

I dont think you can get this from OOB features...But you can use the 3rd party tool, we are using the SCOM for monitoring for our SharePoint, we get the alerts for error which we configured.
http://www.microsoft.com/en-us/download/details.aspx?id=4419
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

SCOM 2012 - How does SQL MP "know" which instances are available and active?

Using SCOM 2012 R2 with Microsoft's SQL MP 6.5.1.
Getting alerts occasionally for issues with SQL instances which are later found to be not active any more or removed from the SQL server.
Can someone explain how the MP determines which SQL instances are available? Is it a matter of simply reading folder structures on the various mount points, reading registry? Much appreciated for any tips.

SCOM SQL MP will using discovery to discovery SQL instance. Once the SQL instance is discovery, the SQL instance object persist in the database even though the SQL instance is removed.
Solution:
To clean up the objects you can run the Remove-SCOMDisabledClassInstance Powershell cmdlet. Then all the relationships that involve objects related to a disabled discovery is deleted.
Roger

SCOM 2012 Closed and Open Alert Reports

Dear all,
In SCOM 2012 R2 how to Generate a report that contain open and closed alerts for past 24 hours. Is there any inbuild report ?
Thanks,
Sengottuvel M

Yes, you can this with Report "Alerts" (http://technet.microsoft.com/en-us/library/hh212929.aspx)
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

SCOM 2012 R2 Connector - Some alerts are not being picked up

I created a Windows service that connects to SCOM to collect unacknowledged alerts every 60 seconds. In the alert iteration process, the very first thing I do is post an update to the alert which indicates that the alert has been received.
When I'm done processing the alert, I post another update showing that the alert has been processed. After processing the alert collection, I acknowledge them with the "AcknowledgeMonitoringAlerts"
method.
The problem I am experiencing is that not all alerts are getting picked up by the connector, which is set up in OM with a subsciption to accept all alerts. This is happening randomly. One minute I'll see a specific alert for a specific server
come through, and an hour later, the same alert for the same server will show up in Operations manager, but won't come through in the connector. This is evident in the fact that the history tab in the alert doesn't show the updates that should
have been posted by the connector.
Anyone else seeing this type of behavior? Suggestions?

Hi,
Based on your description, the issue is random. Would you please check your operation manager event log and check for more details when this issue happen.
And in addion, you may refer to the below article:
Tools to Use for Troubleshooting Connectors
http://technet.microsoft.com/en-us/library/ee809020.aspx
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 - how to setup alerts for specific IT groups.

Similar Messages

Maybe you are looking for