SCOM 2012 Integration with Solarwinds

Hi Experts,
Currently we are using SCOM 2012 for Server, Application, Network, etc monitoring. Also, we are using Solarwinds Network Performance Monitor(NPM) for network monitoring and Network Configuration Manager(NCM) to perform configuration backup of network
devices as SCOM 2012 does not have this capability.
We are planning to have single consolidated view in SCOM 2012.
Please let us know, how can we integrate Solarwinds NPM and NCM with SCOM 2012.
Any help will be appreciated.
Kumaresan Lakshmanan

It depends. To be honest I never used it myself. If this MP is NOT based on OpsMgr Network Device class(es) - it should work on OpsMgr 2012. It seems like this MP queries a Solarwind product with a connector - this probably should work for 2012 as well.
http://OpsMgr.ru/

Similar Messages

Error 10218 while integrating scom 2012 r2 with scvmm 2012 r2

hello,
We are working to integrate the SCOM 2012 R2 With SCVMM 2012 R2 .But while creating connection of integration it got failed with error in job on scvmm as below :
Error (10218)
Setup could not import the System Center Virtual Machine Manager Management Pack into Operations Manager server because one or more required management packs are missing. The VMM Management Packs cannot be deployed unless the following component management
packs are present in Operations Manager :
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
Recommended Action
To provide the missing component management packs, ensure that the following management packs have been imported into Operations Manager server:
Microsoft Windows Server 2003 Internet Information Services Management Pack for OpsMgr 2012 (version 6.0.6278.0 or later)
Microsoft SQL Server 2005 Management Pack(version 6.0.5000.0 or later)
You can download the management packs from the System Center Operations Manager Catalog at http://go.microsoft.com/fwlink/?LinkId=86411
Reference link used :- http://technet.microsoft.com/en-us/library/hh882396.aspx ,We have imported all the required MPs as mention in above link on scom.
Regards
Richa KM

Have you imported all of the packs it mentions:
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
There's a good walkthrough
here which details all the pre-reqs.
It was some time ago but i also did a walk-through with pictures
http://myopsmgrblog.wordpress.com/2013/04/23/scom-integration-with-scvmm/
Hope this helps

SSRS 2012 integrated with Sharepoint 2013, subscription and impersonation

Hello,
We are configuring SSRS 2012 integrated with Sharepoint 2013. The reports are connecting to SSAS cubes via shared Datasources. We have defined user based roles and security in the cubes and would like to pass the effective username to the cubes when they
access data via reports.
Also we need to create subscriptions on these reports to run on either daily/weekly or monthly schedule and send email to a list of users.
How do we configure our Datasources on sharepoint so both could be acheived.
Our Database and Sharepoint are on different servers.
Thanks
Deepak

Hi Deepak
For your first question:
while configuring the datasource in SharePoint, check the option 'Set execution context to this account' in the settings. This will pass the effective user name to the cubes.
Thanks
Bala

Issue with connection SSRS reportviewer control to SSRS 2012 integrated with SharePoint 2010...

Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
        test.Reset();
        test.ProcessingMode =
ProcessingMode.Remote;
        test.KeepSessionAlive =
true;
        test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
        test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
            test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");

What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc

AD RMS 2012 integration with exchange server 2013

AD RMS 2012 integration with exchange server 2013
I would like to have a knowledge About this Topic
1.what is differrent if we use internal SSL certificate with Public Certificate and in this case i would like to use Mobile Phone I eed to import Root Certificate ?
2.Do I have problem? If I start to install AD RMS 2012 with SQL EXpress after that I want to chage it to SQL Server ?
3.when I use SQL Expres what I can do after Disk is full (10 GB)?
4.If AD RMS is down It will affect with email that it is already sent ?
5. Which Edition of outlook can produce IRM protected documents
6. To Use AD RMS Server 2012 through OWA, Outlook and Moblie Phone ,a CAL is required or not ?

Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials

SCCM 2012 integration with SCOM 2012 - Disable Alerts during patching

Have SCCM 2012 R2 and SCOM 2012 R2 and use the Software Update Patching process for servers. When using the checkbox to "Disable Operations Manager Alerts when this program runs" option have noticed on completion of the job and the target
server is rebooted, a scheduled task appears for a short time titled "SCOM 2007 Agent Resume Task". The task disappears and there is no history to view.
Is this a legacy naming convention from 2007 world when the maintenance mode is turned off from the SCCM patching process?
How do I see the actual code behind the SCCM and SCOM integration with Maintenance mode to validate it.

SCCM should use the following SCOM SDK to do that.
http://msdn.microsoft.com/en-us/library/bb437532.aspx
That's incorrect. There is no API or method to put an OpsMgr agent into maintenance mode on the client itself -- maintenance mode is a centrally controlled feature of OpsMgr. The API/code sample you linked is performing that activity on the management server
which assumes you know the management server name and have permissions to carry out the action -- neither of which is fulfilled by the ConfigMgr agent.
The ConfigMgr agent pauses the OpsMgr client agent service and also unloads the workflows from the OpsMgr agent (it only did the first part in ConfigMgr 2007). This effectively puts the agent in Maintenance Mode (although to my knowledge this is not directly
reflected in the OpsMgr console).
Jason | http://blog.configmgrftw.com

SCVMM and SCOM 2012 Integration Issues

Hello, I have integrated SCOM 2012 RTM and SCVMM 2012 RTM and am having lots of issues that were not present with 2007/2008 family integration. For starters, my SCOM environment manages multiple untrusted domains, etc. When enabling VMM integration
I now get hundreds of alerts about "Unable to verify Run As Account", stating that is cannot login as the VMM service account for all clients that don't live in same domain as SCVMM server. For starters why do my physical servers, and all VMs need
to be distributed with this account? The alert is also expected logically, because this is impossible to distribute a Run As account to every agent in a multi-domain untrusted environment. Also according to this configuration, the Virtual
Machine Manager Connection Account created in SCOM is set to less secure (distributed to all agents), which is why the alert is coming up; additionally less secure setting is typically bad practice. Why does SCVMM do this by default? Can it be
changed? What are options here? It seems to me only the SCOM management server should need this Run As account, not every agent? Thoughts on this? Thanks!

I'm running SCVMM 2012 R2 and OpsMgr 2012 R2. I have the integration setup and have had the same issue with the RunAs account logging on to workgroup computers.
I tried changing the account distribution to More secure and only targeting my two management servers and the VMM server. I also changed the profile so that it targeted only the Windows Computer object for the same three servers. I came in this
morning and I do not have the "Run As Account Could Not Log On" message anymore on the workgroup computer, but now I have an alert "VMM Agent Not Monitored By Operations Manager" for the VMM server. I look at the Health Explorer and see that the agent
is reachable but its not being monitored.
I tried changing the RunAs profile back to "All Targeted Objects" but monitoring still didn't restart. Then I tried restarting the OpsMgr agent and then the VMM agent, but still the status did not change. Now, I have just set the account back
to Less secure and have again received the warning from the workgroup computer about not being able to log on. I'll wait a little longer to see if the VMM server begins to be managed.
Any experience with this?

Installation of SCOM 2012 R2 with Orchestrator 2012 SP1 already installed

I'm new here and found this set up.
SCOM 2012 SP1 that was mis-installed badly. No DW, no Data Read or write account used. SPN's missing etc. Nothing is working on the SCOM Server. It's not connected to any other parts of System Center.
Orchestrator 2012 SP1 installed and seems to be working fine.
I know that I'm suppose to upgrade Orchestrator to R2 before upgrading SCOM 2012 to R2. But, I need to install SCOM 2012 R2 right now to ensure monitoring is in place. The question I have is can I install a fresh SCOM 2012 R2 and then go back and upgrade
Orchestrator to R2 or do I have to upgrade Orchestrator 2012 to R2 before I install the new SCOM 2012 R2?

Hi Bigredchief,
Yes, it's recommended by Microsoft to update the Orchestrator first and then SCOM.
Look at the diagram between SC components here:
http://social.technet.microsoft.com/wiki/contents/articles/13188.system-center-2012-integration-guide.aspx
and for Orchestrator here:
http://social.technet.microsoft.com/wiki/contents/articles/13185.system-center-2012-integration-guide-orchestrator.aspx
It’s clear visible from diagrams that SCOM monitors the Orchestrator by Management Pack and Orchestrator is connected to SCOM by Integration pack through Operations Manager SDK connection. The second link as well describes the integration between these 2
components of SC (see #5.3).
You should analyse your System Center components integration, and check if any Orchestrator runbooks communicate to SCOM. In general it will be 2 risk components in such upgrade (SCOM and then Orchestrator) in my opinion - not supported officially by MS
in case of any issues, and stopped working SCOM connected runbooks.
Natalya

Is it possible to use SCOM 2012 R2 with the new Azure Managment Pack to monitor Aure Wadlog Events for azure sdk 2.5

My operations team has been using MOM 2007 and has recently migrated to SCOM 2012 R2.
Till now we are using Monitoring Pack management packs which were released way earlier (https://www.microsoft.com/en-us/download/details.aspx?id=11324),
and had a dependency on diagonstics connection string being present in the cscfg of Azure package.
This pack was allowing us to monitor the wad logs and events generated by applications.
However we plan to move to newer Azure managemen pack (http://www.microsoft.com/en-us/download/details.aspx?id=38414), which allows for discoverability.
I have 2 questions -
Is it possible to monitor Diagonstics Event Log with the new Monitoring Pack released on 10/2014 ? Or will the users still require the earlier pack for monitoring diagnostics installed in parallel ?
Azure SDK 2.5 got rid of diagonstics connection string. Is there any possible way to Monitor of Azure Diagonstics wadlogs using SCOM 2012 R2
Thanks,
Pratush

Hi Pratush,
I would like to suggest you go through the management pack guide to get details. And you should be able to create custom monitor to monitor event logs for Azure.
Hope the below links be helpful for you regarding to monitoring Azure:
How to monitor your Windows Azure application with System Center 2012 (Part 2)
http://blogs.technet.com/b/dcaro/archive/2012/05/03/how-to-monitor-your-windows-azure-application-with-system-center-2012-part-2.aspx
Windows Azure and SCOM 2012
https://social.msdn.microsoft.com/Forums/azure/en-US/ecb409e2-8595-40e8-9a73-757b670b06db/windows-azure-and-scom-2012?forum=windowsazuremanagement
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCOM 2012 issue with disk space alert generation

we have installed SCOM 2012 newly , after that we have imported Windows Operating system MP's. However customization(Override) of alerts, everything is working fine except not receiving low
disk space alerts.
Is there any particular reason why we are not receiving low disk space alerts?

Hi,
Did you reach the threashold both for free % and free Mb? Both needs to be reached before you will get an alert.
For more information, please review the link below:
Logical Disk Free Space Monitor
http://blogs.technet.com/b/jonathanalmquist/archive/2009/04/04/logical-disk-free-space-monitor.aspx?CommentPosted=true
Operations Manager 2012: Monitoring Logical Disk Free Space
http://tmitegypt.wordpress.com/2012/10/22/operations-manager-2012-monitoring-logical-disk-free-space/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why Do i need SCOM 2012 R2 with Exchange 2013 ?

This is a question is commonly asked now a days with the "Managed Service" Feature of Exchange 2013 , why do I still need SCOM for just my Exchange monitoring ?
I have my understanding that still with managed service in exchange there are several component's that needs to be monitored outside the managed service , but I am looking for some nice bullet points.
Please help.

If you are a small shop, then you may not need to spend the money on SCOM to monitor Exchange 2013. However, if you have a large deployement, then you might want to have System Center OM.
While Exchange 2013 does store performance data (configurable I believe) for maybe seven days, you will not have long term trend and performance data. I understand the Exchange 2013 MP is not collecting performance, but this doesn't mean you cannot
replicate what it is doing in a custom management pack for Exchange 2013. Now you will have a single repository for all of your Exchange 2013 servers, where you can see performance history, look at trends, etc.
Furthermore, events that might help you with KHI are going to roll out of the event logs on your exchange servers, unless you are archinving that data, even then, with no centralized location, it will be very hard to keep track of the issues you have experienced.
With SCOM agents sitting on those servers, that data will be stored, again, in a single database, where you can report on KHI's and what not (SLO/SLA included).
Furthermore, we know Exchange 2013 runs checks on potential failover candidates. These checks should come back healthy in order for the server to be considered a good failover candidate. What if these checks detect an issue with a potential failover
candidate? Wouldn't you like to know, so that you can address that before it impacts the Exchange service? Again, this is where SCOM would come in, not just for monitoring for these things, but other issues like network, hardware, software, OS,
etc.
So, like I said, if you are a small shop, you can probably forgo the expenses. If you have a large 2013 environment, then SCOM will be beneficial, but understand that you will probably have to add too the Exchange 2013 managememt pack in order to get
the most out of it (since they stripped this latest version down compared to E2K10 MP).
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Error while running SSRS 2012 report integrated with SharePoint 2013

Hi,
Our reporting services environment has SSRS 2012 integrated with SharePoint 2013. The SharePoint 2013 farm has 2 web front ends, 1 app server and a separate server for reporting services i.e SSRS 2012 .
We have created a https web application in SharePoint 2013 and all the SSRS 2012 reports are deployed into a "Report Library" residing in its root site collection.
The simple reports are running well. But there is a report where we have 3 multi-value parameters. On running this report in IE or Chrome, we get the error "Sys.WebForms.PageRequestManagerParserErrorException: The message received from the
server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'."
Some of the forums suggested to add the below entry in the web config of the SharePoint web app where the SSRS reports are deployed. We did that too, still the error is appearing. Please can anyone help .
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="100000" />
</appSettings>
Thanks

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Is it possible to deploy 2 SCOM 2012 R2 reporting in a SQL server which already has SCOM reporting of a different management group but with 2 different reporting instance.

Hi Experts,
I have a typical situation in the LAB environment. Hope some one helps. I have Installed a SCOM 2012 R2 with SQL 2012 SP1 in a single server (Management group 1). I have installed another management group on another server using this SQL server for its database
so i have everything going fine.
The first management group has its reporting installed in the SQL server. For the second i created a new named instance for that. But i cannot run the SCOM setup in the SQL server (Also holding the Management group 1 MS) as 1 st reporting is already there.
When i run the setup it is asking me to repair it. I don't get the install option so i can install the reporting for management group 2 in the named instance.
Default instance is being used by the 1st management group.
Can any one figure a possibility for installing 2 SCOM reporting services for different management groups in a same SQL 2012 server please.
Gautam.75801

Hi Yan Li,
Thank you for the reply. So as you are aware If i need to instal reporting, i need to run the SCOM 2012 R2 setup in the SQL server and select reporting and select the
instance and then mention the management server there right. I am not getting that option there it is asking me to remove or repair the existing installation as there is already a SCOM entire setup including reporting there. As it is a lab there is no problem
in testing. I have 2 reporting instances. Any suggestions for me on how to overcome this issue and deploy the second reporting in the new named instance ?
Below is the screenshot of the error what i am talking about when i run SCOM 2012 R2 setup to install reporting in the SQL server
When i click on add feature reporting is greyed out (As already 1st management groups reporting is installed)
When i click on remove or repair it
uninstalls the existing one. But i want both SCOM 2012 r2 reporting to be there(For both Management group). Is it possible ? If yes What is the trick to run the setup ?
Gautam.75801

Issue with SQL Agent when install SCOM 2012 R2

Hi all,
i'm try to install SCOM 2012 R2 with all components (Mgmt Server, Operation Console, Web Console, Reporting Server)
Everything is fine, except Reporting Server. I have attached the picture below
I have also check the SQL Server Agent in SQL Server Configuration Manager. It has already started. But... i dont know why?
Is there anyone know what wrong it is??

Many thanks Gautam,
i have checked again in Repoting Services Configuration Manager & change the database to the local SCOM
Cause i'm using database for management server, dataware house on SCCM. So reporting service automatic set the database on SCCM also.... :(
So now i will show everyone who try to install SCOM
For the Management & DatawareHouse database --> you could install on any SQL Server (open port 1433)
For the Reporting Services:
On the local SCOM, install SQL Server with these components (SQL Engine: SQL Agent; SQL Reporting)
After install SQL successfully, login to the Reporting Services Configuration Manager to set:
First, create the new database on local SCOM
Second, Web Service URL. login to the IIS to create self-signed certification for own SCOM. then turn back too Web Service URL to create SSL Certification
Set SQL Agent service to Automatic, then start
so, that's all. I'm crazy with this issue for a whole day :)

Problem upgrading from SCOM 2012 SP1 to R2 (near impossible to uninstall SCOM agent from Management Server)

I'm trying to upgrade our SCOM 2012 SP1 environment to R2, but I have a heck of a problem getting there.
We currently have an test installation with SCOM 2012 SP1 with Management Server and Console on a single 2012 Standard server. The database are located on a remote server. The R2 setup stopped mid way through the setup, because the SCOM 2012 SP1 agent is
installed. And I could NOT remove it my any normal means. I've tried "misexec.exe /x productcode", the setup, powershell uninstall and so on. Nothing works, because the management server installation is blocking the uninstall. The uninstall says
I have to remove the management installation first. And that's not gonna happen.
I had to follow this guide to finally getting through the setup: http://www.opsman.co.za/forcibly-removing-a-scom-agent-that-cannot-be-uninstalled-by-normal-means/
In addition to searching for the agent msi install key in registry, and deleting everything. After I did this, the setup is working, and the SCOM management server, console and DB are up to date. However, the Microsoft Monitoring Agent are STILL there in
Control Panel. And this can NOT be the most healthy way of getting through the setup.
I'm about to upgrade to R2 in our production environment with 3 management servers, and I would hate to go through this sketchy process there as well. Just for the record, I have no idea why the agents are installed on our management servers.
Any of you have tips as to how I can get rid of the agents more gracefully?

Hi
Thanks for the replay guys!
None of those links touch my problem I'm afraid. I have followed the Upgrade guides you pointed to, step by step. But the setup does not Complete. There's problems during the actual software Upgrade of the management servers (3'rd step in the Upgrade page).
I've dived into the Application logs and installation logs, and as far as I can tell, it stops because it has trouble upgrading while the server has the 2012 SP1 Agent installed. I do not remember the actual error text right now, but I can get it in a few
days.
Anyhow, the setup DID move on once I removed most of the registry information of the agent installation. So. that leaves me to the conclusion that the agent IS in fact stopping the setup. Either the agent are malfunctioning, or the setup do not expect the
agent to be present on the management servers. I suspect the latter to be the the most plausible. At least until Yan Li told me this was normal.
So, I'm not sure what to think. I'm pretty much forced to remove this agents, as this is the only thing allowing me to continue the setup. At least untill I'm told otherwise. But I hate to do it this way. It's so dirty. The registry is pretty much cleaned,
but there's still Application files present, and the agent is still in the Control panel and can be started. It's not something I would like to do in our prodution environment.

SCOM 2012 Integration with Solarwinds

Similar Messages

Maybe you are looking for