SCOM 2012 R2 - Tasks not running and Discovery never finishes

Hi all,
I'm having some really weird issues with a new SCOM 2012R2 install. The issue I first noticed was none of the tasks on the right hand side of the SCOM console that run on a monitored server will complete. The window opens and will just have the spinning
green "I'm doing something" circle.
Example: If I run the task list processors on the management server it just sits there like it is running but never returning the result.
Frustrated, I rebuilt the management server and deleted the DB's.  And same issue.
Since these tasks are added with the MP's I tired an older Windows Server Operating System MP just to see if the latest one had issues. Unfortunately I still have the same issue and its driving me crazy
Second issue is the Discovery Wizard is also just sitting there when using the advance option to specify the server I want to push the agent too.
I have tried specifying a domain admin account for both the task and the discovery
Checked the SPN's for the management server and SDK account have been registered.
I have checked the SQL broker is enabled and SQL services are using domain accounts
This is the setup:
SCOM 2012R2 running on VMware Virtual Machine with Server 2012R2
SQL Server 2012 SP1 with the Ops DB on one server and the DW on another
Accounts:
OM_MSAA - Domain Admin... Hopefully gets resolved in the future
OM_DAS - Local Admin on the MS
OM_DRA - Local Admin on the SQL Servers
OM_DWWA - Local Admin on MS and SQL Servers
This is an SOS as I have been given a very short deadline and these are the last issues I needed.
I did install a DEV environment running SCOM 2012R2 but on Server 2012 NON R2 and it works with any of the issues mentioned above.
Thanks Mike

Thanks for the reply Stefan.
The issue was with all Tasks. It was running against the Server 2012R2 management server so i guess it was the Windows Server 2012R2 Monitoring MP. 
I have found the issue. The OM_DAS "SDK Account" needed the SQL service account to have read permissions.
On the Opsman DB server i was getting these errors:
An exception occurred while enqueueing a message in the target queue. Error: 15404, State: 19. Could not obtain information about Windows NT group/user 'domain\OmSDK', error code 0x5.
This article explains the fix: http://blogs.technet.com/b/lukaszr/archive/2012/10/24/discovery-never-stops-but-tried-everything.aspx
Thanks again for replying
Mike 

Similar Messages

  • Server 2012 Scheduled tasks not running after DST

    Since the DST change this weekend the weekly scheduled tasks on our 2012 standard server are not running.  The schedule show the correct next run time, but the task never runs.  The server correctly adjusted for the DST changes (We are in CST in
    the US) and if you look in the date time it notified us that the clock was set forward.
    Any ideas?

    Hi Mark,
    Before going further, would you please let me confirm whether only weekly scheduled tasks t run? In other words,
    did some daily scheduled tasks run smoothly?
    Based on current situation, please create a new weekly
    scheduled task and check if encounters the same issue.
    If this issue still persists. Please let me confirm if you make scheduled task run some commands or a script,
    or others I misunderstand. For an example, if run a script, please directly run it in the Windows Server 2012 Standard and check if there any issue occurred.
    Meanwhile, please open Task Scheduler, select this problematic weekly scheduled task, click General tab. Please
    check which user account was used to run this task. And please check Run with highest privileges, then check if can solve this issue.
    In addition, please check History tab in task Properties. Please pay attention on the time-point when the weekly
    scheduled task should be ran, and check if you can find some events at that time-point. It may help us to go further analysis.
    By the way, there is a similar thread. Please refer to.
    Certain scheduled tasks do not run anymore after DST change
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/47483baf-e7af-4bff-9db4-9c3d0ead2b41/certain-scheduled-tasks-do-not-run-anymore-after-dst-change?forum=winserver8gen
    Hope this helps.
    Best regards,
    Justin Gu

  • HT201412 phone will not connect with iTunes, so you can not run, and I unlocked it and got the message that it is unlocked and I have to connect with the tunes.

    phone will not connect with iTunes, so you can not run, and I unlocked it and got the message that it is unlocked and I have to connect with the tunes.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • I try to launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox is not running and restart doesn't work

    when I launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox not running and a restart doesn't solve the problem

    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 12.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    See also:
    *https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
    *http://kb.mozillazine.org/Profile_in_use
    *http://kb.mozillazine.org/Recovering_a_missing_profile

  • Air 3.4 iOS Push Notification is not fired when app is not running and is not in background

    Hello,
    I'm making an Air iOS application which uses the iOS Push Notification from Air 3.4.
    All is working perfectly except when I receive notifications when the app is not running and is not in background (The app is killed).
    I suppose the RemoteNotificationEvent.NOTIFICATION must be dispatched when I receive a notification even if my app is not currently running or in background ?
    Do you have already get the same issue ? Do you know what can prevent the notification to be handled ?
    Thanks,
    Loïc

    issue has been fixed in the build available at http://labs.adobe.com/downloads/air3-5.html.
    You would now have to attach listener to InvokeEvent. For cases, when application is killed, InvokeEventReason will be InvokeEventReason.NOTIFICATION. The notification payload can be accessed by the following code
    protected function onInvokeEvent(event:InvokeEvent):void
         trace("Invokehandler called .... \n");
         trace("reason: " + event.reason + "\n");
         if( event.reason == InvokeEventReason.NOTIFICATION)
                        var payload:Object = Object(event.arguments[0]);
              for (var i:String in payload)
                    trace("Key:value pair " + i + ":" + payload[i] + "\n");
              // TODO: DO THE NEEDFUL ON RECIEVING A NOTIFICATION HERE

  • I have downloaded OS X Mountain Lion from the App Store. It took two hours to download but now its not running and I have no idea how to make it run!

    I have downloaded OS X Mountain Lion from the App Store. It took two hours to download but now its not running and I have no idea how to make it run!
    Download was complete and I accepted everything and restarted computer but its still running 10.7.5
    Any idea how to get OS X Mountain Lion to run?

    What you donwloaded was the OS installer. You still have to do the installation.
    To get started, double click on the download, then double click again and follow instructions.

  • HT1338 java is not running and there are no updates.  what do i do?

    Java is not running and all software updates are current.  What can I do?

    Is Java enabled?

  • App appears as installed in app store but not open and not run, and the icons are gone from the home screen

    app appears as installed in app store but not open and not run, and the icons are gone from the home screenapp

    Try quitting the App Store app and relaunching:
    Closing Apps on iOS

  • My Apple TV does not work and has never worked.

    My Apple TV does not work and has never worked. I replaced it twice and replaced my router and DSL modem but no luck. I spent hours on tech support with both apple and my ISPs with no luck. Any ideas? Is the Apple TV a donation to apple? I have had the device for 8 months but it will not work for longer than 15 minutes before it drops with network errors. All of my other devices work perfectly on the network including 2 iPads, laptops and an old wii. I love apple products and this is the first real disappointment I have had. The Apple TV seems like a major dud of a product.

    Seems unlikely you have had two faulty replacements, and more likely that there may be some network compatibility issue or problem with reception in the location the AppleTV lies - anything close to it that might be interfering?
    I am assuming you are connected via wifi - if you can try an ethernet connection to rule wifi issues out.
    Could you try it at somone else's house maybe?  If it worked there it would point to something specific at your location.
    You could try replacing it again I guess or seeing if they can offer you credit or a refund.

  • Send/receive hang on "Offline address book Connecting to Microsoft Exchange" and will never finish?

    When I hit send/receive on a few clients the process will hang on "Offline address book Connecting to Microsoft Exchange" and will never finish? These same user can long on the OWA and send/receive just fine. The problem is that while it's hanging it can't go out and look for new email. Any thoughts?

    I had similar problem.
    This actually arose due to the fact I had mistakenly set the Default web Site directory with a HTTP redirect which applied to all subfolders including OAB.
    I did then rectify this by going into individual subfolders and unchecking Http Redirect from each sub folder, however unknowingly  it created/modified a webconfig file under the OAB virtual directory. (you can explore it to see the
    file there)
    If you test your OAB url (for people with the issue), which is : http(s)://servername/oab/[code]/oab.xml you will get Error 500.
    Each time Outlook 2007 was trying to connect to get OAB, it was trying to read that webconfig file.
    I fixed this by changing the permissions on that webconfig file to allow everyone and the above error was done, and also my Outlook 2007 was downloading the OAB again!
    Now if the above fix did not fix your problem, you can temporarily effectively disable OAB by unticking Web Distribution of OAB and Public Folder Distribution in EMC under Organisation/Mailbox/Offline Address Book. Users will be able to do a
    send/reiceve without any errors/issues. However, if a new contact/user is added to your AD with exchange attributes, the clients will not be able to see this. I'm guessing if cached mode was also not used, issues would also occur if they tried using the GAL.
    acidack, you are a lifesaver.
    I looked at the other webconfig files in the internet directories and noticed they all had 'Authenticated Users' with read permissions while the OAB one did not.  Adding this group with read permissions solved the problem; Outlook 2007
    users are no longer frozen on the 'Offline address book connecting to Microsoft Exchange" message.
    What caused this? I'm not sure.  I was messing with the web settings trying to redirect people to OWA. Something I did must have caused this file to be re-created without the needed permissions.
    Acidack and AndrewB, You are both live savers.  After all these years, your solution to this problem is still spot on.

  • SCOM 2012 Installation does not show the SQL Server Instance for reporting services

    I have an issue when I try to install SCOM 2012 with the Reporting Server feature, so in the step that I have to select a SQL Server Instance I cannot do that, because as you can see in the picture no one option appears.
    In my scenario I have a DCSERVER, SQLSERVER2008 R2, SCCMSERVER 2012 and in other server I are trying to install SCOM 2012. I are trying to use the same SQLSERVER to SCOM 2012.
    Should I do other procedure on SQL Server before to continue? I will apreciate someone could say me what I need to do to resolve this issue.
    Regards,
    Paul Mendoza.

    Hi Paul
    Can you confirm that SQL Reporting Services is installed on the server that you are doing the install.
    For a lab environment where you have SCOM Management Server, Web Server on one server and SQL Server on another you need to:
    - run setup on the SCOM Server and choose NOT to install reporting. The install here will create the OperationsManager database and OperationsManagerDW (reporting) database.
    - run setup on the SQL Server where SQL Reporting Services is installed. Then choose to install reporting. You should then see the SQL Reporting Services instance on the above window which is blank in your screenshot.
    Take note of the warning in that window - SCOM uses its own role based security within SQL Reporting Services and this can break other reporting. E.g. you can't install SCOM and SCSM reporting (SQL RS component) together. 
    Cheers
    Graham
    New SCOM 2012 Blog! - http://www.systemcentersolutions.com/blog/
    View OpsMgr tips and tricks at
    http://systemcentersolutions.wordpress.com/

  • SCOM 2012 R2 Gateway installation error and no System Center Management server after install

    Hi,
    I have installed SCOM 2012 R2 Gateway and I got an error 25372 error at the start of the install. It still installs though. However I have no system center management service running in services but I can see healthservice.exe is running.
    Why am I not seeing the system center management service?
    Thanks.

    Using gateways with certificates is always a bit complicated because there are several things that needs to be configured correctly.
    DNS: The MS and the GW server need to be able to resolve each others FQDN. you can adjust the hosts files if needed.
    Traffic is only TCP 5723 from the gateway to the MS. You can test this with the telnet client.
    Certificates:
    http://marthijnvanrheenen.wordpress.com/2012/03/28/scom-2012-connecting-a-gateway-server-using-certificates/
    The gateway server should NOT be in pending management. Remove it from here before running the approval.
    You should start by making sure DNS and the 5723 port are functioning because that is probably where the problem is.
    Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

  • KM Scheduler Task not running

    Hello All,
    I have created a scheduler task for the , for the same I have created a PAR file , have successfully Build the project and deployed , Have configured the time in the Global services . But for some reason I could not see the task being running in the "Component Monitor" (when I select the Services-->scheduler >select one of the CM systems (have two currently)>click on on the CM system ) I could not see my custom task .
    As well as When I go to "Service configuration" --> Portal Application , there also I could not see my custome application .
    Initially whenever there use to be any error (for example -- CM systems not assigned etc etc ).
    Is it something I am missing while deployement , Or has it being deployed properly?
    Regards,
    Ronniee

    Hello Detlev,
    Any Inputs on this please.
    I have opened a new thread but a different Query
    http://forums.sdn.sap.com/thread.jspa?threadID=2155357
    Regards,
    Ronniee.

  • SCOM 2012: Agent Proxy not enabled.

    I am seeing Critical Severity alerts on my SCOM 2012 Server stating:
    "The agent was not able to submit data on behalf of another computer because agent proxy is not enabled. Details:Health service ( 0C43A2D6-628F-D150-9553-8EABFECA600C ) should not generate data about this managed object ( 716D31EF-F34C-A4E3-1A16-3B8B75E85C0D
    I have about 8 servers with this error. All of which have had Proxy turned on in SCOM ( Administration -> Agent Managed -> <agents in question> -> Properties -> Security Tab -> Checked "Allow this agent to act as a proxy...".
     All of these servers are on the same domain as the SCOM server (we only have 1 domain).
    Thanks,

    For what it's worth I'm experiencing this issue. I've closed out the alerts and watched them pop back up later.
    The agent was not able to submit data on behalf of another
    computer because agent proxy is not enabled. Details:Health service (
    774FAEE6-003E-7CAC-FC02-676C0D9F675E ) should not generate data about this
    managed object ( 13354EE4-F0F9-DF55-88F0-271F30A70AAB ).
    PS C:\> Get-SCOMAgent |Where-Object -Property id -eq '13354EE4-F0F9-DF55-88F0-271F30A70AAB'
    PS C:\> Get-SCOMAgent |Where-Object -Property id -eq '774FAEE6-003E-7CAC-FC02-676C0D9F675E'
    PS C:\>
    This alert was generated about an hour ago, I have 160 agents installed.
    My guess is...well I don't have a good guess. any help about this would really be appreciated.
    Jeffrey S. Patton Jeffrey S. Patton Systems Specialist, Enterprise Systems University of Kansas 1001 Sunnyside Ave. Lawrence, KS. 66045 (785) 864-0242 | http://patton-tech.com

  • SCOM 2012 collect Windows Audit logs and forward them to a Linux Syslog server

    Hello:
    1. We have a SCOM 2012 server.
    2. We have SNARE agents for PCI systems, but now we want to save money by gathering all events for all Windows servers using its native features.
    3. We also have a centralized Linux server running SYSLOG which aggregates the logs to our Dell LogVault retention appliance (for PCI purposes)
    Thus, my question:
    In effort to remove the SNARE agents from the windows servers, can we implement Audit Collections Services (ACS) in the windows environment so that they collect/forward audit/event logs to the SCOM 2012 server and then SCOM forwards the events to the centralized
    syslog Linux server? In which case they are aggregated to the Dell appliance.
    We prefer to use the Linux syslog as the centralized log server but would like to know how to go about implementing the solution above.
    Many thanks,
    Robert Perez-Corona

    Hi,
    Here is a thread about how to make SCOM 2012 work as a syslog server, hope this can be helpful for you:
    https://social.technet.microsoft.com/Forums/en-US/524ea527-c069-40f9-96ef-026a4aa06fe9/make-scom-2012-a-syslog-server?forum=operationsmanagergeneral
    Regards,
    Yan Li
    Regards, Yan Li

Maybe you are looking for