Screen designing - doubt in call transaction

Hi Experts
I have created the screen with 5 pushbuttons.
If i click the pushbutton program calling the T.code.
for example :
one push button is for T.code 'MM03'. Byaccessing this i have created the material. Once the material is saved how to go back to the main screen.
Hope it is clear for you.
pls help me.
Thanks
Kumar

hi,
Use like this
MODULE user_command_0200 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'BACK'.
LEAVE TO SCREEN 100 . "use your screen no
Edited by: Aeda N on Nov 20, 2009 12:25 PM
Edited by: Aeda N on Nov 20, 2009 12:25 PM

Similar Messages

Skip first screen of BD87 using call transaction with BDC_DATA option

hello all,
i am using call transaction with BDC_DATA option and i want to skip first screen, so can anyone please tell me how can i skip first screen of BD87 and get second screen that is output screen?
regards.

Hi
Build a BDCDATA with following code..
                                                      T     BD87
RBDMON00     1100     X
BDC_CURSOR     SX_DOCNU-LOW
                                                            BDC_OKCODE     =CRET
                                                            SX_DOCNU-LOW
SX_CRETI-LOW     00:00:00
                                                            SX_CRETI-HIGH     00:00:00
                                                            SX_UPDDA-LOW     05.02.2010
                                                            SX_UPDDA-HIGH     05.02.2010
                                                            SX_UPDTI-LOW     00:00:00
                                                            SX_UPDTI-HIGH     00:00:00
RBDMON00     0100     X
BDC_OKCODE     =BACK
RBDMON00     1100     X
BDC_OKCODE     /ECBAC
                                                            BDC_CURSOR     SX_DOCNU-LOW

Doubt in Call Transaction

Hi All,
CALL FUNCTION 'GUI_UPLOAD '
EXPORTING
FILENAME = 'C:\Documents and Setting\shri\Desktop\Order.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = ITAB.
When i use this function module to create a sales order VA01, It showing error for the first record,that is the first line in the text file,but when i give the same line in any other row in the text file it is taking properly.So I want to know in the generated text field what should be the first line? Whether the first line should have only the field names or what?
Thanks .

hi Shri,
the problem may be the conversion exit.
After uploading the text file into your internal table . Please use the conversion exit for all the mandatory fields.
Thanks
Sekhar

Problem in passing selection screen values using CALL TRANSACTION.

Hi All
I am facing problem in transfering selection screen values to the called transaction. I am trying to pass the path of the transaction filer but to no avail. The variable for filepath is not empty.
Below is my code:
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFBASM00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'RFPDO1-FEBUMSF'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'RFPDO1-FEBUMSF'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'PASS'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
opt-dismode = 'E'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Please help.
Harsh

Hi Harsh,
I think you have entered wrong main program for tcode 'FF_5' and wrong screen field for the file name. Use the below code instead of yours.
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params,
       gv_filepath type char128 value 'C:\testfile.txt'.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFEBKA00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'UMSFILE'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'UMSFILE'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
*wa_bdcdata-fnam = 'BDC_OKCODE'.
*wa_bdcdata-fval = 'PASS'.
*APPEND wa_bdcdata TO lt_bdcdata.
*CLEAR wa_bdcdata.
opt-dismode = 'A'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Thanks.
Regards,
Jey

BDC or Call transaction QM01

Hi,
I need to call transaction QM01, on the first screen always select Z4, on the next always pass a deliverynumber and finally show the third screen to the user.
Had it only been the forst screen I should skip a Call Transaction and skip, with parameters should be enough, but as far as I know, I can't skip two screens like that in Call Transaction.
So I tried to do a Batch Input. But when playing my recording, these small windows keeps appearing with ok codes, that I need to confirm. How to get the Batch input to run in background and only show third screen to the user?
Simple question from an ABAP wanna be
Kind regards
Mikkel

Mikkel,
The ideal solution would be to develop a mass maintanence transaction for this purpose. What I mean is to develop a table control. In effect you should be able to combine the functionality of the multiple screens in to a single screen and do the recording.
The not so ideal solution would be to always force an error on the third screen for the user. In this way the third screen will always be forced to the user and he has to make amends for it.
Hope this helps,
Sojan

Regarding ME22n Call Transaction method

Hi,
i am working on BDC Object, in this object i am attaching output type 'XXX' in messages for each purchase order(ME22n).For example if i am taking multiple range of purchase orders.It shows following message whenever i m executing in no screen mode.
' No batch input data for screen SAPMSSY3 0121' and Call transaction return code is 1001.
If i am debugging the same object in All Screen mode its working fine.
SAP Version is 4.6c
I Searched all the relvant threads but i am not able get the Soloution.
Can any one please help me regarding this.
Thanks and Regards,
kishore.

ME22N is an enjoy transaction, officially not compatible with BDC. (Look at OSS [Note 217437 - ME21N/ME51N: Batch input and CATT not possible|https://service.sap.com/sap/support/notes/217437] and [actually search at sdn|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=me22n+bdc&adv=false&sortby=cm_rnd_rankvalue])
Try to use [BAPI_PO_CHANGE|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=bapi_po_change&adv=false&sortby=cm_rnd_rankvalue] (BUS2012) which exists in 46C even if not officially released.
Regards

Call Transaction Method of BDC

Hi All,
How to read screen field values using Call Transaction method of BDC? The BDC recording for the transaction /SAPAPO/TSCOPY has been done and only values from 2 fields have to be read which deals with Keyfigures. GS_KFMAP-KEYF_FR & GS_KFMAP-KEYF_TO are the two screen fields.
Thanks & Regards,
Savitha

Hi Savitha,
Can you please clarify Whether you want read the values or Populate values to screen fileds using call transaction?.
If you want to read the screen filed values.I think we do n't use BDC.Directly we can refer to the screen fields and try to find out what fileds(dictionary) they are reffering.

Doubt in uploading using call transaction method

hi all
i am uploading f-29 in call transaction method .. i have a problem in currency field, the currency field is not picking up it shows a error that input field is longer than screen field .. i have declared currency field as type BSEG-WRBTR(same as screen field ...how to go about
thanks
lokesh

Hi,
When you use the database value directly in your BDC, you will have this issue. It is always advisable to use character fields when doing BDC. so change it to charecter field and try it..
Regards
Sudheer

Drill down to all screens of XK03 in ALV report from CALL TRANSACTION

HI!
I have created a vendor master report which calls the XK03 transaction when the vendor is clicked on on the ALV output. It takes me to the XK03 address screen and when I try clicking to go to the next screen it says the last screen is reached , 'Do you wnat to cancell processing'. I want to enable the program to goto the next screens as well like the controll screen and the accounting screen ect in my drill down on call transaction.
following si my code section which does it.
CASE rs_selfield-fieldname.
        WHEN 'LIFNR'.
*       Set parameter ID for transaction screen field
          CHECK NOT wa_vend-lifnr IS INITIAL.
          SET PARAMETER ID 'LIF' FIELD wa_vend-lifnr.
          SET PARAMETER ID 'BUK' FIELD wa_vend-bukrs.
          SET PARAMETER ID 'EKO' FIELD wa_vend-ekorg.
          SET PARAMETER ID 'KDY' FIELD kdy_val.
          CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN. "EC needed
ENDCASE.
ENDCASE.
Thanks and regards,
Aarav

Hi,
Your code seems to be right.
Try writing the code as the below format.
CASE SY-UCOMM.
* CHECK FUNCTION CODE
WHEN '&IC1'.
* CHECK FIELD CLICKED ON WITHIN ALVGRID REPORT
IF SELFIELD-FIELDNAME = 'LIFNR'.
* READ DATA TABLE, USING INDEX ROW USER CLICKED ON
READ TABLE IT_FINAL INTO WA_FINAL INDEX SELFIELD-TABINDEX.
* SET PARAMETER ID FOR TRANSACTION SCREEN FIELD
SET PARAMETER ID 'BES' FIELD WA_FINAL-LIFNR.
* EXECUTE TRANSACTION 'XK03',AND SKIP INITIAL DATA ENTRY SCREEN.
CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
Thanks
Arbind

Passing selection screen values to the next report using CALL TRANSACTION

Hi experts,
I have 2 reports. In the first report i have the 3 input fields in the first report, how do i pass the values to the next report which is transaction: ZKKBC_PKO_2.
I want to display in the next report the selections that the user previously selected.
First report:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: COMP     LIKE AFRU-WERKS OBLIGATORY MODIF ID s1.
PARAMETERS: PERIOD   LIKE COEP-PERIO OBLIGATORY MODIF ID s1.
PARAMETERS: YEAR     LIKE COEP-GJAHR OBLIGATORY MODIF ID s1.
SELECTION-SCREEN END OF BLOCK b1.
CALL TRANSACTION 'ZKKBC_PKO_2'.
Anyone can help me?
Thanks,
Lawrence

Hi experts,
What i did is this:
Using SET PARAMETER
in the first report
SET PARAMETER ID 'WRK' FIELD COMP.
SET PARAMETER ID 'VPE' FIELD PERIOD.
SET PARAMETER ID 'GJR' FIELD YEAR.
CALL TRANSACTION 'ZKKBC_PKO_2'.
Second Report
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: WRK     LIKE AFRU-WERKS.
PARAMETERS: VPE     LIKE COEP-PERIO.
PARAMETERS: GJR     LIKE COEP-GJAHR.
SELECTION-SCREEN END OF BLOCK blk1.
Using SUBMIT
First Report
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: COMP     LIKE AFRU-WERKS OBLIGATORY MODIF ID s1.
PARAMETERS: PERIOD   LIKE COEP-PERIO OBLIGATORY MODIF ID s1.
PARAMETERS: YEAR     LIKE COEP-GJAHR OBLIGATORY MODIF ID s1.
SELECTION-SCREEN END OF BLOCK b1.
SUBMIT ZCO_PRDCOST_ACTUAL_2 VIA SELECTION-SCREEN USING SELECTION-SETS OF PROGRAM 'ZCO_PRDCOST_ACTUAL_1' AND RETURN.
Second Report:
GET PARAMETER ID 'WRK' FIELD comp.
GET PARAMETER ID 'VPE' FIELD COEP-PERIO.
GET PARAMETER ID 'GJR' FIELD YEAR.
Either this 2 ways i still cannot get the first report selection values on the 2nd report. Can someone help me see if my codes is correcT?

Call transaction and skip first screen

Hi,
I have a little but I think difficult problem
I have a selection screen and after that I call my dnypro. In this dynpro I can open a dynpro which looks like a popup where I have the possibility to call the same transaction with other input paramters.
the problem is when I make call transaction and want to go back I see the pop up dynpro which calls the transaction. so how can I close this popup dynpro by calling again transaction?

I think I can't eyplain it.
Following. I have:
call transaction trans: selection screen calls dynpro 100, in dynpro 100 button with dynpro 200 with starting parameters.
dynpro 200 calls again transaction trans with skip first screen.
now I have displayed again dynpro 100 with new values. When I now want to go back I can see dynpro 200 which called the transaction. So how can I achieve this that dynpro 200 isn't shown when I go back ?

Call Transaction and skip first screen on workflow task

Hello, I'm developing a workflow with a user decison step, where the user should fill some data in transaction FD02.
When the user presses the button in the workitem, the wf goes to a step where i should call transaction FD02.
I'm using SET PARAMETER ID: 'KUN' FIELD customer. to fill the customer field and CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.
But when I press the button in the workitem nothing happens. I tested the same in a report and it works. Can anybody help me?
Thanks a lot.

Hi,
try below code
data: fcode type FCODE value 'ANTRAGAEN',
       customer type kunner,
       bukrs type bukrs.
SET PARAMETER ID 'KUN' FIELD customer. " to fill the customer field
SET PARAMETER ID 'BUK' FIELD companycoder. " to fill the company code
SET PARAMETER ID 'TTC' FIELD fcoder.       " to fill Function code for enter " it may be other than TTC please check.
CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.

CALL TRANSACTION AND SKIP FIRST SCREEN to specified tab in TCODE 'IW32'

Hi,
I am using CALL TRANSACTION AND SKIP FIRST SCREEN in ALV Grid Report to call IW32 tcode and it goes to tcode skipping the first screen. But it goes to the default header tab in the tab control. Whereas I wish to go to the specified tab 'OPERATIONS'.
Can any one help me, as to how to resolve this issue ?
Thanks in advance.

Sridher,
I have the similar requirement. but in my case its COSTS tab. Could you please provide the code you have used for this to work?
I used standard "call transaction with mode 'E' ". This seems to be working but I am not pleased by my effort. Is there any proper way that you might have followed ?
Greatly appreciated your help.
Regards,
Reddy

Call Transaction and skip first screen in SE37

Hi All,
I want call transaction SE37 and skip first screen of it. Is it possible through the statemen Call transaction 'SE37' and skip first screen ?.
Of course I have populated the parameter id 'LIB' before this statement but it is not working. Though I have found several posts with this solution but it's not working for me. Could anyone please let me know if this can be done using this statement or there are any other additions required along with this statement or it is not at all possible to achieve this functionality.
Thanks in advance !!.

Solved! without a solution? very funny.
In somewhere of second screen related bdcdata, intensionlly make a mistake to force the system throws the error and the call the trasnaction with mode 'E'. This will solve the issue.
perform bdc_field using 'BDC_CURSO' " I removed letter R in 'BDC_CURSO'
'ISEG-ERFMG(01)'.
CALL TRANSACTION 'XXXX' USING BDCDATA MODE 'E'.
Thanks.
Suresh Yerra.

How to skip first screen while calling transaction

Hi all,
I am using interactive alv.
if i select one line and press details
that must go to another screen.
In that i must skip first screen and directly go to the details of that first screen.
suppose i am using the code as follows
call transaction mm01 and skip first screen
this is giving me error.
how to solve the problem.
thanks and regards,
giri.

hi giri,
For ur requirement, u can use SKIP FIRST SCREEN addition for CALL TRANSACTION Command.
Before this, u have to use SET PARAMETER ID Command to pass the required values for transaction.
Example, In transaction VA01, we have to set parameter AUN to pass the sale order number to the transaction.
<b>
AT LINE-SELECTION .
SET PARAMETER ID 'AUN' FIELD w_vbeln.
CALL TRANSACTION 'VA01' AND SKIP FIRST SCREEN .</b>
where w_vbeln contains the sale ordre number. Now VA01 runs for this sale order number..... And AUN is the PARAMETER to be set before calling VA01 TCODE.
similarly, check the PARAMETER associated with MM01 Tcode and initialize that parameter and call the code in the similar way.
To check parameter Id of MM01,
1) Enter MM01 Transaction
2) Press F1 on Material Field
3) Select Technical Info
4) u can find Parameter ID associated with this field.
check these links for full details.
call transaction...
http://help.sap.com/saphelp_47x200/helpdata/en/78/21761c51ce11d189570000e829fbbd/frameset.htm
at line selection,
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba2c435c111d1829f0000e829fbfe/frameset.htm
get/set parameter:
http://help.sap.com/saphelp_nw04/helpdata/en/5b/7bc3775d1111d295ad0000e82de14a/frameset.htm
Reward me if useful........
Harimanjesh AN

Screen designing - doubt in call transaction

Similar Messages

Maybe you are looking for