Screen Size and Java?

Hi
I'm newbie in Java language.
I'm creating a game to run on every mobile fone that support Java, this game will have pictures (.png).
So my two questions are:
-When a launch my game i have to know if the mobile support Java?and if so is there any library or class or other way to know if that mobile support java?
-The screen size varies from mobile to mobile, through the method getHeight() and getWidth() i get the mobile resolution, when i create the pictures i have to create them to a standard size? is there any standard resolution to mobile fone?
Best regards
Luis
[email protected]

So my two questions are:
-When a launch my game i have to know if the mobile
support Java?and if so is there any library or class
or other way to know if that mobile support java?If the phone does not support java, the app will not run ;)
-The screen size varies from mobile to mobile,
through the method getHeight() and getWidth() i get
the mobile resolution, when i create the pictures i
have to create them to a standard size? is there any
standard resolution to mobile fone?No standard resolution. There are a few resolutions that are often used though. You might look into that.

Similar Messages

Screen Size and Resolution on Remote Access Mavericks

Hi Forum,
Accessing my Mac Mini remotely and it has a new install of Mavericks. The Screen size and shape and resolution isn't right, but Screen options in System doesn't give me any options. Is this because, physically, no screen is attached? Do only screen sizes and options come up when a screen is attached?
it currently shows 1280x960 [i think - just turned off the mac to get back to work] or 'scaled to fit'. Neither is right for the MBP remote access,. It was fine before i upgraded.
any ideas?

Hi xerhino, and a warm welcome to the forums!
Good work on your part!
Hope your doing OK with the Snow, Ice, and Winds!

Adjust front panel to screen size and re-position objects on different systems automatically

Hello, i have designed a vi that contains 5 led's placed at the 4 corners and center of the front panel which occupies the entire screen. However, this vi is to be used on different systems having different screen sizes. But on every screen, i'll need the front panel size = screen size and the led's to be placed to the centers and corner of this new screen size automatically without any manual operations and positioning bieng done every time. Will the resize option perform this task completely or do i have to go for some other techniques?
Solved!
Go to Solution.

As far as I know, what you want is not easy to do but it is doable but you have to programmatically do it (no Labview setting). Here is an example for only 2 LEDs but I suppose that you will be able to make it work for your other LEDs.
This VI maximizes the front panel and then positions the 2 LEDs in the center and top right corner upon running. The LEDs are positioned according to their own top left corners, not according to their centers.
Marc Dubois
HaroTek LLC
www.harotek.com
Attachments:
Position LEDs.vi ‏14 KB

Adjust the screen display dynamically for a given screen size and resolutio

Hi All,
Is there a posibility to change the size of a table control dynamically to maximize the screen utilization keeping in mind , the different screen size and resolution. This is to increase the breadth of the table control that there is maximum utilization of screen and which would not produce any horizontal scroll bar in case of small size monitors.Kindly advice.
Best Regards,
Ashwini

There is no such control that you can put into the programming logic to enhance the visual appearance of the table controls or screens. This is taken care of by SAP GUI, which will adjust the display size of the table control according to the screen resolution.

Air 15 known issues - wrong screen size and dpi

Will the next update of Air 15 solve the issues below..
the dpi problem with iPhone 6 plus is a show stopper, i cant get away with delivering a reduced dpi
... under pressure to update 20+ applications ...
Known Issues AIR 15.0.0.183
[ iPhone 6 Plus] [Launch image] A blank screen observed in apps when Default-568h@2x is packaged.
[ iPhone 6 Plus] Wrong screen size and dpi is returned through the runtime APIs .
[ iPad 3 and later] iPhone Launch image(Default@2x. png ) appears on iPad if iPhone launch images are packaged along with iPad launch images
Well done to the Air team for the good work done so far, not easy keeping up with Apple on IOS8 at the moment...

I am having simliar issue where I can get the iphone 6 launch image to work but not the iphone 6+ when using [email protected], 2208x1242. Also the stage.fullScreenWidth/Height give 1472x828, which is 2/3 the expected dimensions or 736x414 at scale factor 2, not 3. I hope adobe fixes this soon or we won't be able to launch new games with Apple as it is a requirement to have your apps Iphone 6/6+ optimized. If this isn't fixed soon were pretty much forced to abandon adobe and move onto another software solution that will allow us to build for Apple.

Is there a way to make movies open with the same screen size and position?

Hello, I'm a new mac guy having just bought an i-mac a few months ago.
I have a bunch of saved movies that open in quick time. Each time I open a separate movie by double clicking the file, the window opens in the upper right hand corner in a fairly small window. I must then drag the window size and location to a much larger size. I do this every time.
I saw under quicktime, preferences, a section about preferences for full screen. This seems to work one time, for that movie, but all subsequent movies (even in full screen) or their same size.
Is there a way to make the window size and/or location permanent?
Thanks.

this would have seemed like an easy thing to do but i've had no luck; one more attempt at a solution?

XSD size and Java XML Parsers (specifically SAX)

Does the size of XSD matter in terms of performace runtime. I would like to create an XSD as one contract that houses all non-mandatory elements so the resulting xml out of this will use similar structure but wont use all of the XSD elements.
Is there a problem with such an XSD which will be 1000 or more elements as far as Java parsing is concerned
Pl. let me knwo thanks

I do a lot of work with an international standard -- S1000D -- for documentation and technical manuals. It has 58 schema files (10 that are main files that are referenced by an XML file, and the other 48 get imbedded as needed). It does not slow down the parsing of files by any noticable amount.
Dave Patterson

Screen size and font size unreadable to set the access permissions for Flash Player.

I can increase my screen view size to make everything appear larger but the screen on Adobe website to manage the use of the Flash Player has very tiny writing that DOES NOT increase in size when I increase the size of my screen view. It is not use user friendly nor compliant with common standards of web pages being accessible for people who have visual disablilities. The font size looks like 6pt.
What does it take to make this giant company allow the window size of the settings to be enlarged or magnified?

They will stay on the screen. However, Process Monitor is only intended for advanced users. It is recommended that users try to navigate to the troublesome registry key using regedit, and see if they can access it or not without an error. This is far easier than trying to use Process Monitor, which is very complicated.
I used Process Monitor to confirm that it was just that key which was causing the problem, and not others. Process Monitor is not to be confused with the new Resource Monitor which is accessible via Task Manager in Windows 7 (and possibly Vista). If you must experiment (and Process Monitor is very useful for diagnosing many deep-level problems if you know what you're looking for) Process Monitor can be downloaded from here:
http://technet.microsoft.com/en-us/sysinternals/bb896645
It replaces the older Sysinternals "FileMon" and "RegMon". For those interested in the technical side, I had to setup a number of filters to be able to get the results display as in the screenshot. First of all to just show Registry events. Then to just show events from the manual Flash activeX installer executable. The I added a filter to show only non-successfull results. And finally, for the purposes of the screenshot, added a filter to just show those with "Access Denied", since other non-critical errors are also picked up due to missing keys because installation has not yet been fully completed I guess. When experimenting, most of these filters were applied using the "is not" boolean logic, which will make sense if you experiment with the program.
Without adding any filters, it picks up so many events (hundreds per second) that it's otherwise unusable. e.g. 40,000 events within the first few seconds of opening the program. For this reason, I recommend simply using Regedit to diagnose the problem with the particular Flash registry key.

What preference controls Screen Size and Resolution

After many months of good behavior, my MacBook Pro is back mirroring video to a phantom VGA monitor every time I wake it up. This mangles the view of my actual laptop screen since the phantom is 800x600. I can get rid of it by clicking Detect Montiors, but it takes between 10 and 20 tries for this to work. I am presuming that a particular preference file controls this behavior, so perhaps if I trash that pref, things will go back to behaving normally. I could not find a pref file for displays. Any ideas?

Resetting PRAM and NVRAM has no effect on this problem. Removing the com.apple.systempreferences.plist seems to have done it. The problem is somewhat intermittent, so I will report back in a week if it looks like it solved the problem completely.

Safari save as window opens larger than screen size and I can't get to the

In safari, I choose File -> Save As. The save dialogue window is taller than my screen and the buttons get buried under my bottom toolbar. I can't reach the save buttons and I can't seem to reach the right hand corner to manual resize it. I've tried clicking the green button in the top left hand corner but it doesn't change a thing.
thanks to anyone that can clear this up.
s

I tried clicking the blue export button so its pointing down and the save dialogue window does shrink. However, the adjustable dashes that normally appear in the bottom right hand corner, are not there. The only appear when the export button is pointing up. Too bad I can't reach it.
Your 2nd idea worked! My display was already at max resolution BUT I had a 2nd monitor and dragged the save box over and the smaller display was enough to reach that bottom corner.
yeah!

Screen size and resolution mismatch after 2008-008 update.

This is very odd. My screen is shifting around every time I move the mouse on my macbook pro. It appears that the mac doesn't think the full resolution will fit on the screen, and so shifts a few pixels up (or down, left, right) whenever I move around the screen. It's very difficult to use since it distorts whatever I'm reading. I've tried selecting different display resolutions: 1440x900, 1280x800, & 1024x768, but the problem persists even on lower resolutions.
Could be a red herring, but I've checked the install.log for errors and found a couple instances of this sequence:
Dec 22 07:42:04 gseven : update_prebinding[25268]: update_prebinding: too many errors (101)
Dec 22 07:42:04 gseven : update_prebinding[25268]: update_prebinding: error: terminating
Dec 22 07:42:04 gseven : update_prebinding[25268]: update_prebinding: error 256 running updateprebindingcore
I don't know if that could even be related. Anyway, does anyone have an idea how to fix this?

Hi xerhino, and a warm welcome to the forums!
Good work on your part!
Hope your doing OK with the Snow, Ice, and Winds!

Window & frame screen size and resolution

hi,
i have just finished my website:
- done with dreamweaver mx and mac
- only html with a menu on the left frame that always stays
the same and pictures on the main/right frame
- haven´t had any trouble opening the website with
safare or internet explorer in my computer.
the problem seems to be that in some PCs, the left menu
doesn´t appear completely, the last 4 lines from the bottom
disappear under the screen and you need to scroll down, which is
not how it´s meant to work.
this might be a silly thing to ask for it´s simplicity
but i can´t seem to make it work. can someone offer some help?
thanks!!

Don't use frames.
The reason for using or not using frames should be based on
a) your site's
needs, and b) your willingness to accept the potential
problems that frames
can create for you as developer and maintainer of the site
and for your
visitors as casual users of the site.
I am down on frames because I believe that they create many
more problems
than they solve.
Judging from the posts here, and the kinds of problems that
are described,
the kind of person most likely to elect to use frames is also
the kind of
person most likely ill-prepared fo solve the ensuing problems
when they
arise. If you feel a) that you understand the problems and b)
that you are
prepared to handle them when they occur, and c) that you have
a need to use
frames, then by all means use them.
As far as I know, the most comprehensive discussions of
frames and their
potential problems can be found on these two links -
http://apptools.com/rants/framesevil.php
http://www.tjkdesign.com/articles/frames/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"chrisbcn" <[email protected]> wrote in
message
news:[email protected]...
> hi,
> i have just finished my website:
> - done with dreamweaver mx and mac
> - only html with a menu on the left frame that always
stays the same and
> pictures on the main/right frame
> - haven?t had any trouble opening the website with
safare or internet
> explorer
> in my computer.
>
> the problem seems to be that in some PCs, the left menu
doesn?t appear
> completely, the last 4 lines from the bottom disappear
under the screen
> and you
> need to scroll down, which is not how it?s meant to
work.
>
> this might be a silly thing to ask for it?s simplicity
but i can?t seem to
> make it work. can someone offer some help?
>
> thanks!!
>

Screen size and Premiere Pro

So, I use to use Premiere Pro when I worked mostly from a desk top. I switch to PE when I got a laptop. Well, I am thinking of getting PPro again. My laptop has enough RAM and processor speed and all that - BUT it has a 13.5 inch screen. (I travel alot and need/prefer a small laptop).
Here is the question. If I go back to PPro am I going to go nuts trying to use it on such a small screen? PE works pretty well on the laptop, it's not too squished together. But PPro has so many more features and windows.
Anyone have any experience editing with PPro on a 13.5in screen (resolution 1366x768)? I could use some of the xtra features of PPro but if it is too difficult to work with on my screen I just as well stay with PE. (FYI: I contacted Adobe and they said PPro will work fine on my laptop... just condenced into a small space.)
Thanks in advance for the feedback.

>resolution 1366x768
If PPro will work at all, some of the screen will not display
Some ideas for a Laptop Video Editing PC from past discussions
http://www.adkvideoediting.com/
http://www.sagernotebook.com/ - http://forums.adobe.com/thread/957472
For effective HD video editing, a laptop with the following
-at least the Intel sandy bridge 2720 or 2820 quad processor
-and nvidia graphics such as the 460m with 1Gig video ram
-1280x900 display with OpenGL 2.0-compatible graphics card
-and 8 or 16 gig ram and Win7 64bit Pro
-and 2 internal 7200 HDDs minimum

The display on my screen has become too big. I've tried adjusting the screen size and the zoom isn't set. Can anyone help?

I have an iMAC 7.1 running OS X 10.6.8.
The display has become too big for the screen. I've looked at the zoom and it is turned off. I've tried adjusting the pixel setting (currently 1920 * 1200) to no effect.
The bar at the top of the screen is elongated, and I can't see the time in the top right hand corner.
This is affecting everything I lookmat, the dock in the bottom doesn't show until I bring the mouse down (hide dock is off).
I have no idea what caused this and I can't fix it.
Does anyone have idea what the problem is and how to fix it?
ANy help would be greatly appreciated.
Thanks.

No wheel, it's a magic mouse.
Tried safe start. No difference.
The dock and the icons are off the bottom of the screen.
I I have finder open and move the cursor to the right to show the time, I lose finder / file /edit from the overhead banner.
Still no closer to solving it.

Support multiple screen sizes and DPI values in a mobile application

This question was posted in response to the following article: http://help.adobe.com/en_US/flex/mobileapps/WS19f279b149e7481c682e5a9412cf5976c17-8000.htm l

This is wrong statement:
"DPI is the number of dots per square inch: that is, the density of pixels on a device’s screen". DPI is not per SQUARE inch.

Screen Size and Java?

Similar Messages

Maybe you are looking for