Screen Size Issue for Syclo Smart Service Manager

Hi,
I am working on Syclo Smart Service Manager and have made some screens in android platform.
The issue is earlier I was using a Panasonic tablet which was auto fitting the screens according to the screen size of the device.
But now we have ported the application to a new Motorola tablet.
If we keep the screen height same then the lower fields are getting cropped .
If we increase the screen height then then a vertical scroll bar appears in the screen and we have to perform scrolling on the screeen to view all fields.
Is there any way that this issue can be fixed and screen adjusts itself on the device as a best fit view.
Thanks
Star Grover
Tags edited by: Michael Appleby

Hi Bill,
Yes we tried to run the motorola device in android large platform first but it was not able to detect it.
Then we changed the platfom to android normal for motorola device and we got the screens.
The screen size difference between the two devices is not much so it is ambiguous why they are working for two different platforms.
They should both ideally work on same platform as they have almost the same dimensions.
But still is there any way that we dont have to readjust the fields and they fit automatically in the new devie.
It will be too much time consuming and hazardous task to readjust each and every screen.
Kindly let me know.
Thanks,
Star

Similar Messages

Is it possible to configure size disk for a Cloud Service?

Is it possible to configure size disk for a Cloud Service?
What happens is, I have deployed a Solr Server on a Cloud Service, and the application folder is on E: Drive, but it is only 1.5 GB. I want to increase it, because index content created easily exceeds this limit.
Thank you.

hi Luis,
Base on my experience, E drive is the app disk. The apps (application) disk is where your .cspkg is extracted and includes your website, binaries, role host process, startup tasks, web.config, and so on. It is only 1.5G (http://msdn.microsoft.com/en-us/library/windowsazure/dn197896.aspx
). So I think you didn't worry about its space.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Screen size problem for schedule line bdc

Hi All,
I created a bdc for schedule line item maintainance of sales order thro' VA02,I did all coding on 20 inch color monitor in which the schedule line screen shows 18 lines using that i did recording for bdc.But when keyuser executes BDC on laptop it is not procceding.
Please help me out with solution which is applicable on all kind of screens
Regards
Gaurav

When you use BDC, you may have issues with screen size because number of lines displayed in table controls (and step loops) may vary according to the user screen, when the BDC is recorded (depending on recorder screen size), and then executed in A or E mode depending on user's screen size. When it's N mode, a default screen size is used by SAP.
The only solution is then to both record and execute the BDC by activating the default/standard size checkbox (if you use CALL TRANSACTION: it's DEFSIZE field in CTU_PARAMS structure of the OPTIONS FROM keyword).
For more information, refer to the documentation and the [BDC wiki|http://wiki.sdn.sap.com/wiki/display/ABAP/BatchInput-+BDC] + separate FAQ

Issue with installing second Service Manager server

We decided to install a second SM server to use as a test following the KB from MS below:
http://technet.microsoft.com/en-us/library/dn520899.aspx
We later found out that this install process had some issues and we needed a hotfix from MS to resolve it. The hotfix is basically a whole new installer MSI. MS had me uninstall SM and then reinstall using the MSI they gave me.
I am not getting the following error trying to do the install
Install Services
An error occurred while executing a custom action:_CreateMOMRegKey.
The upgrade attempt has failed before permanent modifications were made.
Upgrade has successfully rolled back to the original state of the syste. Once
the corrections are made, you can retry upgrade for this role.
The install rolls back and thats it. MS has been somewhat helpful but we still haven't gotten it resolved. Anyone else try installing this hotfix version of SM and run into the same issue?
The KB that refers to the replacement MSI is
KB2862620.

among other things, _CreateMOMRegKey creates registry keys related to ops manager and service manager. This is a common error with a management server reinstall, since these keys are not removed by an uninstall, and the creation method apparently does
not handle the case where they already exists. Consider
this thread.
The long and short of it is that you will probably need to remove the registry keys [HKLM\Software\Microsoft\Microsoft Operations Manager] and [HKLM\Software\Microsoft\System Center] as well as restore your management server's encryption key from the backup
you made after installing the first time.

Screen size issues

Hi it's me again
Another problem I am struggling to resolve at the moment is
the screen size on published files. For example, if I publish in
swf and link it to a menu the screen size is too big on that movie.
I have saved the movie as full screen (menu screen size is fine).
If, however, I save my movie as exe and attach it to the menu (full
screen option) the size of the screen is right, but I get a warning
message up first, entitled File Download - some files can harm your
computer...and then gives options to open, save, cancel or more
info. If you select open then the movie starts fine and the screen
size is perfect, but I don't want this warning message up each
time.
Does anyone know what I can do to achieve the right screen
size without the error message?
I've been hunched over this thing and my shoulders ache - I'm
off to get some red wine!
Cheers
Julesy A

Hi Julesy A and welcome to our community
Sounds like you are creating .EXE files and pushing those to
a server. When you do this, you will always receive the "Save file
to your hard drive or run from here?" dialog. There simply isn't a
way around it.
What is the recorded size of your movie? Hopefully it is
smaller than your existing screen size. 1024x768 is typical for
Windows XP systems. It's best to avoid recording full screen.
Especially at that resolution. I always opt for the lowest common
denominator and my personal favorite size is 640x480. I find there
isn't much I can't display using this size.
Also, perhaps you are confused about what the "Full Screen"
option does for you when you publish. If you publish in .SWF
format, you have the option of including an HTML "companion page".
This page is intended to display your movie. If you choose the
"Full screen" option, you get TWO HTML pages. One you will link to.
Then when this page is displayed, your user will click a link that
opens the second in the "Full Screen" mode.
From what you have posted, I'm guessing your best bet is to
use the .SWF output. I also highly recommend using the HTML pages
to display the .SWF content.
Hope this helps... Rick

Issue for choosing disk from managed ASM

Hello All,
Oracle Grid Infrastructure installation(11gR2) is in progress, I am not being able to select disk from managed asm disk group, details are as listed below:
uname -a
Linux hostname.host.com 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
createdisk for ASM disk group for following disks have been completed:
ASMDATA1
ASMDATA21
ASMDATA22
OCR_VOTE01
OCR_VOTE02
OCR_VOTE03
# oracleasm status
Checking if ASM is loaded: yes
Checking if /dev/oracleasm is mounted: yes
# oracleasm listdisks
ASMDATA1
ASMDATA21
ASMDATA22
OCR_VOTE01
OCR_VOTE02
OCR_VOTE03
$./runcluvfy.sh comp nodereach -n devrac1,devrac2 -verbose
Pre-check for cluster services setup was successful on all the nodes.
$./runcluvfy.sh stage -pre crsinst -n devrac1,devrac2 -verbose
Pre-check for cluster services setup was successful.
$./runcluvfy.sh comp nodecon -n devrac1,devrac2 -verbose
Verification of node connectivity was successful.
$./runcluvfy.sh comp sys -n devrac1,devrac2 -p crs -osdba crs -orainv oinstall
Verification of system requirement was successful.
$./runInstaller
INSTALLATION OPTION: Install and Confgiure Grid Infrastructure for a Cluster
INSTALLATION TYPE: Advanced Installation
PRODUCT lANGUAGE: English
GRID PLUG AND PLAY:
SCAN/GNS configuration:
     cluster Name: devrac1
     SCAN Name: scan.devrac1.domain.company.net
     SCAN Port: 1521
     GNS sub Domain: devrac1.domain.company.net
     GNS VIP Address: 192.168.112.32
CLUSTER NODE INFORMATION
     Hostname: devrac1.domain.company.net,      Hostname: devrac1.domain.company.net
     Virtual IP Name: AUTO,AUTO
     SSH Connectivity: PASS
NETWORK INTERFACE USAGE
     Interface Name:eth0, eth1
     Subnet: 192.168.112.0,10.10.10.0
     Interface Type: Public, Private
STORAGE OPTION: ASM
CREATE ASM DISK GROUP
     DiskGroupname:ORCLDATA
     Redundancy: External
     If Candidate Disks is the option, does't list any disk path.
     If All Disks is the option, list all disks configured for ASM but couldn't check any disk path.
     When we click on "Next" button, following error message would be seen:
          [INS-30507] Empty ASM disk group.
How can I select disk from managed ASM disk group here at this position? What I have missed in my installation for Oracle Grid Infrastructure?
Thanks in advance.
Regards,
Suresh Gautam

Hello Harish,
I don't think that there is issue of discovery string as I can see list of all disks path for ASM, but couldn't include(checked) listed disks for new ASM disk group. I couldn't see any option to trace for OUI while providing configuration for setup, it may trace the information when it starts installation. Please, correct me if I am wrong.
Configuration of /etc/sysconfig/oracleasm is as follows:
ORACLEASM_ENABLED=true
ORACLEASM_UID=oracle
ORACLEASM_GID=oinstall
ORACLEASM_SCANBOOT=true
ORACLEASM_SCANORDER=""
ORACLEASM_SCANEXCLUDE=""
How scan order can resut such a issue during installation? I couldn't understand.
Anyway, I did modification in /etc/sysconfig/oracleasm as you have suggested, then reinitiated installation process after system reboot, modified parameters are listed below for your reference:
ORACLEASM_SCANORDER="emcpower sd"
ORACLEASM_SCANEXCLUDE="sda sdb sdc sdd sde sdf sdg"
BUT COULDN'T RESOLVE THE ISSUE.
output of "fdisk -l" is as follows, it can give you additional information:
========================================================================
# fdisk -l
Disk /dev/sda: 72.9 GB, 72999763968 bytes
255 heads, 63 sectors/track, 8875 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 2053 16386300 82 Linux swap / Solaris
/dev/sda3 2054 8875 54797715 83 Linux
Disk /dev/sdb: 288.1 GB, 288161071104 bytes
255 heads, 63 sectors/track, 35033 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 35033 281402541 83 Linux
Disk /dev/sdc: 287.7 GB, 287762808832 bytes
255 heads, 63 sectors/track, 34985 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 34985 281016981 83 Linux
Disk /dev/sdd: 288.5 GB, 288559333376 bytes
255 heads, 63 sectors/track, 35082 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 1 1217 9775521 83 Linux
/dev/sdd2 1218 2434 9775552+ 83 Linux
/dev/sdd3 2435 3651 9775552+ 83 Linux
/dev/sdd4 3652 35082 252469507+ 83 Linux
Disk /dev/sde: 288.1 GB, 288161071104 bytes
255 heads, 63 sectors/track, 35033 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 35033 281402541 83 Linux
Disk /dev/sdf: 287.7 GB, 287762808832 bytes
255 heads, 63 sectors/track, 34985 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 34985 281016981 83 Linux
Disk /dev/sdg: 288.5 GB, 288559333376 bytes
255 heads, 63 sectors/track, 35082 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdg1 1 1217 9775521 83 Linux
/dev/sdg2 1218 2434 9775552+ 83 Linux
/dev/sdg3 2435 3651 9775552+ 83 Linux
/dev/sdg4 3652 35082 252469507+ 83 Linux
Disk /dev/emcpowera: 288.1 GB, 288161071104 bytes
255 heads, 63 sectors/track, 35033 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/emcpowera1 1 35033 281402541 83 Linux
Disk /dev/emcpowerb: 287.7 GB, 287762808832 bytes
255 heads, 63 sectors/track, 34985 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/emcpowerb1 1 34985 281016981 83 Linux
Disk /dev/emcpowerc: 288.5 GB, 288559333376 bytes
255 heads, 63 sectors/track, 35082 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/emcpowerc1 1 1217 9775521 83 Linux
/dev/emcpowerc2 1218 2434 9775552+ 83 Linux
/dev/emcpowerc3 2435 3651 9775552+ 83 Linux
/dev/emcpowerc4 3652 35082 252469507+ 83 Linux
========================================================================
Any kind of follow up will be highly appriciated.
Regards,
Suresh Gautam

Screen size/resolution for iPad 3

Hi
I'm designing a portfolio app. At the moment I am previewing it on an iPad 2 in content viewer and all looks OK (text a but fuzzy but I hear thats normal) However I have set the articles and folio builder up in iPad 3 sizings as we will shortly be getting an Ipad 3 and will be showing off our work (we're a design agency) on the new higher res iPad 3. So, is it best practice for me to work to 2048x1536 @ 264 ppi for the iPad 3 versions, then when I've designed and built my app, downsize to 1024 x 768 at 131ppi?
Thanks in advance
Steve Chapman

Hi Bob/Anyone – I found this post whilst doing some research – what are your opinions of it guys?
If my maths are correct then, for the iPad 3, keeping the document at 1024×768 pixels but just doubling the res (72ppi to 144ppi) is exactly the same as doubling the doc size to 2048×1536 but keeping it at 72ppi!!
Michael Buelens
September 10th, 2012 • 4:45 am • Link
There seems to be a lot of confusion about the whole retina story amongst print designers.
It is actually quite simple folks.
When you design something for iPad 1 or 2 use a 1024×768 pixels document at 72 ppi.
When designing for the retina ipad make a document 2048×1536 pixels at 72 ppi.
If you don’t believe me I’ll do the math for you: 2048 pixels wide on a 7.75 inch wide display > 2048 / 7.78 = 264. And 264 just happens to be the advertised resolution of the Retina iPad.
If you want to let users zoom in on images without the images becoming pixelated, use higher resolution images.
Use Indesign to layout the documents and create the PDF not Photoshop as mentioned before. Photoshop will produce rasterized text while a PDF from Indesign will offer crisp text at any zoom level.

Regarding screen guard issue for xperia z3

When is the screen guard of xperia z3 coming to india. Iam from visakhapatnam, Andhra Pradesh

You are best asking at Xperia care as this is a user led support and as such don't have these answers http://www.sonymobile.com/gb/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Push Configuration for Account Factsheet - Service Manager

Hello Experts,
The Account Factsheet is not getting generated and downloaded in the application. Please find the below details ,
When the Account Sheet is triggered from the application , the push request was registered in the table /SYCLO/PSH01.
The Push Processing got triggered via QRFC and the Queue name is fetched.
But this Queue name is not present in Push Instance Monitoring in the Admin Portal.
Can you let me know how to proceed further , to get the factsheet downloaded to the device ?
Thanks in Advance.

Hello,
You may want to follow the system instruction, and maintain entry in the given table.
This can be found in the SPRO here :
Interaction Center WebClient->Agent Inbox->Inbox Search Definitions->Define Item Types for Searches
Best regards,
Sylvain AGUETTAZ

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

Best practice for setting or detecting screen size?

Hi All,
Trying to determine a best practice for setting or detecting the screen size. For playbook and iOS, I can set them. But for Android, the number of devices is too large so I'd rather detect. My first choice is to use the stage.stageHeight and stage.stageWidth. This works fine if I set my stage properties with standard meta data:
[SWF(height="320", width="480", frameRate="64", backgroundColor="#010101")]
However, if I use the application descriptor file to set the stage dimentions (as suggested by Christian Cantrell here http://www.adobe.com/devnet/flash/articles/authoring_for_multiple_screen_sizes.html)
<initialWindow>
<aspectRatio>landscape</aspectRatio>
<autoOrients>false</autoOrients>
<width>320</width>
<height>480</height>
<fullScreen>true</fullScreen>
</initialWindow>
Then the stage.stageHeight and stage.stageWidth are not the correct numbers when my main class is added to the stage. Sometime after the main class is added to the stage, then those numbers are fine. Is there an event I can wait for to know that the stage.stageHeight and stage.stageWidth are correct?
Thanks in advance!

Hi Lee,
Thanks for the quick response! However, for some reason the heightPercent & widthPercent metadata tags are not working as expected for me.
I have a wrapper class that I target for compiling, WagErgApplePhone.as where I've got my metadata
[SWF(heightPercent="100%", widthPercent="100%", frameRate="64", backgroundColor="#010101")]
sets some stage properties
stage.quality=StageQuality.LOW;
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
and instantiates my main class
var main:Main = new Main();
addChild(main);
my main class constructor even waits for the stage
public function Main(){
if (stage) init();
else addEventListener(Event.ADDED_TO_STAGE, init);
in my init function, stage.stageHeight traces out as 375 (expecting 320).
i have a function which is called via a button press event by the user, and stage.stageHeight traces out correctly (320) there. that's what makes me think that if i wait long enough, i can get the correct stageHeight before init/drawing. but i'm not sure what event to listen for, or if there's another trick.
if i use Capabilities.screenResolutionX and Capabilities.screenResolutionY the correct values are provided for mobile, but these values are not useful for the desktop and web version of the app. if there's no other solution, i'll execute different code depending on platform.
again, for reference, my app descriptor:
<initialWindow>
<aspectRatio>landscape</aspectRatio>
<autoOrients>false</autoOrients>
<width>320</width>
<height>480</height>
<content>bin-iOS/WagErgApplePhone.swf</content>
<title>WAG ERG</title>
<fullScreen>true</fullScreen>
<renderMode>cpu</renderMode>
</initialWindow>
looking forward to any other ideas to try out & thanks so much for your thoughts! if you want to really dig in, this is an opensource project at code.google.com/p/wag-erg/

Screen size on YouView menu.

Hi Guys,
Im wondering if anyone can help. I have the BT YouView Plus box (details at the bottom of this message). When I first got it, this problem was here. Then after a few weeks "something" happened, and it was fixed, then after a reset to factory, its gone screwey again!
The issue I have, is that when you access the YouView Menu (single press of the blue button), all of a sudden the screen size has changed. Its like you have zoomed in by about 10% into the centre of the screen. You cant see what the Red or Blue buttons do, as you can only see part of a word, or the blue button icon in the corner, but you cant see the words that follow. Likewise, when you access the likes of the On Demand Players, you can see perfectly the players in the middle, but anything on the outside looks as if it stretches onto the other screen.
Same for the guide, and the MyView pages...
I dont know what "something" happened that fixed it before, but I would prefer to have it fixed again.
The aspect ratio of the TV is fine, as it works for all other devices on HDMI, I can swap the cable back to another device and have a clear and decent sized image as expected, but then all of a sudden, plug in youview and just the menu's are out of the standard size.
Anyone any idea's, as I cant find an espect button on youview, the zoom button makes no odds, it just allows me to pick an area of the screen to zoom into, and it then just goes back to where it was...
Thanks

Some TVs have separate aspect ratio/screen size settings for each input, so just because it's set correctly for all the other inputs doesn't necessarily mean it's set correctly on the Youview input. I had this problem when I first set Youview up a few days ago, then I twigged it and corrected it (while the Youview input was selected). That's worth a try, anyway.

"CS5 Service Manager" dialogue box fix.

Hi,
I'm looking for a fix for the "CS5 Service Manager" dialogue box that comes up on a mac, after installing Yosemite. Any ideas how to turn it off or uninstall?

Thanks for the input.
My issue isn’t so much with CC (it’s working fine), but when I open indesignCC I got the message that CS5 Service manager needed a legacy version of java to run.
This issue seems to be a legacy issue going back from CS5. When you click on more info, it just takes you to a blank HTML page.
I went through the Hardrive/Library/ApplicationSupport/Adobe/CS5ServiceManager Folder... and simply deleted it.
Theres lots more out-dated junk in there. Uninstall doesn't get everything I guess.
Thanks,

When is Apple going to fix the screen size bug???

How long has it been since iTunes version 11 was released? There has been an screen size issue (bug) since the release date that is more than annoying.
Also, since I don't normally vent on support communities, I will take this opportunity to list some features that would be a nice addition to iTunes.
ADD ADVANCE FUNCTIONS TO SEARCH. My iTunes library is huge (mostly music). It would be great to have a search function for specific composer, title, genre etc...
It would be stupendous to add a global search function across all levels of iTunes. For example: search for a specific title in Music, Movies, TV Shows, iTunes Store etc. all at the same time.
Add a feature to disable "Up Next". I personally don't like the added functionality in version 11, and prefer the earlier versions.
Bring back the Album/song view.
Windows 8 Pro 64bit
iTunes 11.0.1.12

JerryOnTheBlock wrote:
...I will take this opportunity to list some features that would be a nice addition to iTunes.
ADD ADVANCE FUNCTIONS TO SEARCH. My iTunes library is huge (mostly music). It would be great to have a search function for specific composer, title, genre etc...
It would be stupendous to add a global search function across all levels of iTunes. For example: search for a specific title in Music, Movies, TV Shows, iTunes Store etc. all at the same time.
Add a feature to disable "Up Next". I personally don't like the added functionality in version 11, and prefer the earlier versions.
Bring back the Album/song view.
1. ▼
2. But really, really slow if you include the iTunes Store, which presumably, is why you asked your first option, which actually does exactly what you say you don't want in your first point.
3. ▼
4. Something like this perhaps?...
which has the Sidebar (with Playlists, connected devices etc. etc.), the top menu bar, and is showing the Column Browser, with choices to show or not show the columns for Albums, Artists, Genres, and the songs all listed underneath?
Yes, it's iTunes 11!
And if that last view is not the one you mean, I'm sure it's there somewhere.

Service Management: Contract data sources, Exrractors and cubes

Hi Fellows: I have never worked in Service Management before and I have been asked to locate the extract strucutres, data sources and cubes for some reports. The reports are for contracts, contract renewals, Contract repairs, Contracts Units End of Service, Contract customers, Contract Customer Report Card etc. Are there any standard extractors, data sources for contracts or service Management?
Contracts     PLACE ID
Contracts
Contracts     MODEL ID
Contracts     SERIAL ID
Contracts     Contract Start Date
Contracts     Contract End Date
Contracts     LINE VALUE
Contracts     Contract ID
Contracts     Contract Version
Contracts     Invoice Date
Contracts     Invoice ID
Contracts     NAME
Contracts     LOCATION
Contracts     Address
Contracts     City
Contracts     Global Name
Contracts     Name
Contracts     Place ID
Contracts     State
Contracts     Zip
Contracts     Sales Group B
Contracts     Sales Group C
Contracts     Contract ID
Contracts     Version
Contracts     Term of Contract
Contracts     PO Number
Contracts     Product Location
Contracts     Phone
Contracts     Model ID
Contracts     Serial ID
Contracts     Part ID
Contracts     Quantity
Contracts     Service Plan
***Contract Renewals:
Contract Version
Status of New Contract
New PG Description
Event Code
Event Created
New Price
New Travel Price
Old Price
Old Travel Price
****Contract repairs:
Problem Resolution
Received Date
Repair Center Info, name, address, ciy, state, postalcode, country
Repair Center Info, name, address, ciy, state, postalcode, country
Repair Center Info, name, address, ciy, state, postalcode, country
Repair Center Info, name, address, ciy, state, postalcode, country
Repair Center Info, name, address, ciy, state, postalcode, country
Repair Center Info, name, address, ciy, state, postalcode, country
Scheduled Ship Date
Serial # Received
Serial # Registered
Serial # Shipped
Service Repair (Work) Order #
Technicians name
Tracking #
Account Indicator

This may help you..open the folders in left
http://help.sap.com/saphelp_nw70/helpdata/en/ed/9dfb3b699bde74e10000000a114084/frameset.htm

Screen Size Issue for Syclo Smart Service Manager

Similar Messages

Maybe you are looking for