Scroll Bars driving me nuts!
I have components defined in the following way:
<mx:VBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100%" height="100%">
<mx:TabBar dataProvider="resourceCustomization"/>
<mx:ViewStack id="resourceCustomization" width="100%"
height="100%">
<resources:DefineResourceType label="Define Resource
Types" width="100%" height="100%"/>
</mx:ViewStack>
</mx:VBox>
Where the resources:DefineResourceType component has the
following structure:
<mx:HBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100%" height="100%">
<mx:VBox height="100%" width="50%" paddingLeft="10">
<!-- some components here -->
</mx:VBox>
<mx:VBox height="100%" width="50%" paddingLeft="10">
<!-- some components here -->
</mx:VBox>
</mx:HBox>
Initially when this loads there is a single vertical scroll
bar and everything looks nice. However, the two VBoxes associated
with DefineResourceType can grow in height as the user interacts
with them. Once they exceed a certain size then two vertical scroll
bars are displayed. One is associated with the DefineResourceType
component and the other is associated with the outermost VBox.
Anybody have any idea how to get only 1 vertical scrollbar, this
has been driving me nuts for a couple days now.
Yeah, they kick my butt too. What I usually do is turn them
off for all containers, then add thenm back to the ones I want.
I sometimes think they should be off by default.
Tracy
Similar Messages
-
Spry menu bar error in firefox....driving me nuts!
First of all, thank you in advance for all your help. I have a problem that I can't fix and it is driving me insane.
I have vertical spry menu bar that shows a scroll bar on mouse over in firefox. Here's what driving me insane. A buddy of mine came to me with this problem on his website http://www.fransky.com a while back and I fixed it. But I can't remember what I did. Now he has a new domain and moved the site to the new location http://www.franskyselfdefense.com The old one is still up and running and works fine in firefox. The new one has the srcoll bar over the buttons on mouse over again in firefox. SpryAssets are the same. Identical pages uploaded to either website will work on the old site - and will not work on the new location. I can't find a major difference in the uploaded folders. I thought it must be a site wide configuration but I can not find anything.
It is getting to me guys, can you please help. I tried everything I could think of and I can't, for the life of me, remember what I did the last time. I know that the site has a lot of trash in the code. Was my buddies first shot and he changed and deleted a lot in the process and there is a lot of resedue in the code. We will start over in time, now that he knows what he wants, but I need to get this working for him. It's his source of income and I don't think I have enough space for him and his family as new roommates :-)
I fixed it before and I am not that smart, obviously or I would remember.
Any idea?
Thanks again,
MaxOne more thing that I forgot. We moved the online store to the new location. The better link for the comparison is http://www.fransky.com/shop.html because it has all the sub items too and is just an older version of the http://www.franskyselfdefense.com/index.html with a little bit different content, but no major changes in the menu bar.
I uploaded the new index up to fransky.com as http://www.fransky.com/index75 as comparison and you can see that it works just fine there. -
The new tab behavior is driving me nuts. It keeps re-centering on tabs nearest the start of the list when I move a tab. How do I change this?
I don't want to download an app. I would rather add a new string in about config or just change of the ones in there to false. It's making my work life rather difficult, to be forced to go all the way back to the end of my list after moving one tab just to have to do it again. I mean it's to the point where I might consider changing browsers if they had tab scroll bars.
Edit: At this point I will download any app. Please make this stupid feature stop.The result of setting up that code will do exactly as you described: the tabs will be crowded together. I had not noticed any change in behaviour of Firefox with tabs because all the tabs are crowded together, so they cannot scroll, and I very seldom move tabs.
-
Source Monitor Zoom Scroll Bar Problem
Hello!
I am hoping there is a quick fix for this. After the update I noticed my source monitor zoom scroll bar resets it's bar length
whenever I set an in or out point. This is driving me nuts since the bar usually resets to a size where I can't see
my in and out points anymore.
Any help would is much appreciated!Hi SongImageProdctions,
Thanks for contacting Adobe Forums,
please follow this thread : http://forums.adobe.com/thread/1276947?tstart=0
Thanks,
Sandeep -
Vertical/Horizontal Scroll Bars in Numbers 3.0
Just upgraded from Numbers 2.0.1 today. I have a few simple spreadsheets that were converted to 3.0 that now have horizontal and vertical scroll bars that take the page WAY past where the sheet data is. In fact, when I create a blank document, the scroll bars at the bottom and right also want to extend far past the black sheet template data.
Simply put, how do I make these disappear? In the past I just dragged the right bottom corner of the window and they disappeared as it auto detected that the page data stopped at the last cell.
I realize this question is sorta ridiculous, but my OCD has me going nuts because I can't fix thisbump, anyone?
Another issue with this is that after I close the document, it doesn't save the format of the spreadsheet (wide like a 16x9 HDTV / landscape). It looks like it wants to make it a portrait shaped every time the file is opened. Is there no way to save the format? -
Scroll-bar STILL not working right in 10.6.1 update
The scroll-bar is STILL NOT working right in the 10.6.1 update. I am not able to click anywhere on the scroll-bar and have the navigation go there. I have to drag the blamed thing where ever I want it to go. This problem only exist with the recent iTunes 10.6.x updates.
I have the new MacBook Pro 2010, Dell 3007WFP. No mirroring problemsat that or higher res. I was chagrined, however, to find out that while my 2007 15" MacBook Pro had no problems driving the Dell 30", the 2010 17" requires the Dual Link cable for $100 extra. ;>(
But it works fine.
ak -
How can I get rid of the ber at the top of the screen that shows allow it is driving me nuts
At the top of the scren there is a bar acress the top of the screen the has a window that says allow, some time I have to hit the allow button to let a page download, & it is driving me nuts. How do I get rid of it.
See:
*Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
See also:
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel#General_tab
*http://kb.mozillazine.org/accessibility.blockautorefresh
*http://kb.mozillazine.org/Accessibility_features_of_Firefox -
This is driving me Nuts routing question
Okay...here is what i am trying to do:
I am trying to use a hardware device, as an efects unit. I want to be able to apply the resulting processed outgoing signal, to my master mix.
I am following the instruction in the manual for the Hardware unit, which is an effects unit that also functions as VST plug in. I have discovered that the VST part of it, simply allows you to control the dials via a software interface, but that the hardware unit itself, still has to be routed in and out of Audition.
Here is my hook up so far:
I have a dry vocal track in track 1 on my multi tracker.
It is routed to Bus A
Bus A, is routed to outgoing port 3 on my sound card, which carries sends the track to the hardware effects unit.
The processed track comes back through the SPDIF In, on my sound card.
Thus, Track 3 on my multi track window, takes In the SPDIF
Track 3 is also routed out to the Master track
Herre is the net reswult:
The signal gets processed correctly. The wet version comes into track 3 as expected. I can record it onto track 3, if I wish.
But despite the fact that track 3 is routed OUT to the Master, the Master track does not seem to hear track 3. Thus, I cannot rout the processed track to the master mix for mixdown.
My goal is to be able to create a mixdown which would include the processed sound from track 3, but I can't figure out how to make the processed sound go to the Master track, so that it can becoem part of the mix.
Here is a picture of the audition mixer window. Please scroll to the far right of this picture, as I have a dual monitor and the left side is is what i am typing..the right side is the mixer pic.
(ignore track 2...it does nothing)
www.musicfusion.us/collabs/route.JPG
This is driving me nuts. Any help would be very much appreciated.
Thanks you>But despite the fact that track 3 is routed OUT to the Master, the Master track does not seem to hear track 3. Thus, I cannot rout the processed track to the master mix for mixdown.
Assuming that I've understood you correctly:
AFAIK, that's quite correct; you can't add a live source to a mixdown. You can determine what you hear by altering the overall monitoring settings (Audition mix, external), but I'm pretty sure that you can't add a 'live' anything to an actual mixdown
process, simply because this is based on file manipulation. So, you have to record it first. And anyway, even if you could do what you want, the timing would be all over the place. -
CS3 Crop Tool, this is Driving me NUTS!!
hello, I was just wondering if someone can tell me what stupid little thing I am missing with the Crop tool.
I have done it before...What I want to do is have the crop tool set at a fixed dimension, WITHOUT resampling let's say I have a picture set to 72ppi, that's 8"x8". And I want the crop tool to be fixed at 150px by 90px, res: 72ppi. What is happening now is, the crop tool is dragging the entire span of the picture, and resampling my selection to the size I specified in the options bar above. I don't want that
What I want to happen is that when I click and drag, only a fixed 150x90px box appears, so that I can't make it any bigger than that...I have done it before....but for some reason I cannot find the option to turn of resampling, or for that matter the options for deleting the cropped out space or hiding it.
It's driving me nuts!! any help would be greatly appreciated.
Thanks a lot,If you leave the resolution box blank, whether the crop tool resamples or not then depends on the size units you choose in the width and height boxes. If pixel units are entered, the original resolution is preserved and resampling must occur to effect that. If inches are used, resampling does NOT occur.
-
How can i make the lightbox without a scroll bar?
hello,
when i press the "small picture" to open it in the lightbox the picture opens with a scroll bar. I wanna know how to make a lightbox without a scroll bar when it opens up (to make the picture fixed)
thank you very much in advance
NormanYes I have, but when I resize the window smaller than the picture it happens again , I get a scroll bar, I've seen some webs made by muse that even if you resize the window to be smaller than the pic you don't get a scroll bar and u have to make the window bigger to be able to see the pic all. I hope you can help me out with this cause its driving me crazy.
Thank you very much,
Norman -
Things that are driving me nuts in Lion
There are numerous little things that are driving me nuts in Lion and I decided to list them all in this one annoying thread rather than start a bunch of annoying threads. Maybe some of you have found solutions, maybe some of these things bug only me, but here they are. Feel free to chime in with your own items that are driving you nuts...
WIth multiple tabs open in Safari, clicking on a tab causes the page to reload from scratch instead of the page being cached
I really miss having double scroll arrows on the top and bottom of windows
Downloaded installers do not automatically launch and mount as in previous OS X versions
Can't find a way to specify where to download a file to on the fly when clicking on a link in Safari. other than the downloads folder or another default folder
Scrolling in general has become more difficult and less precise. I literally could not scroll down my list of mail messages to find an email I was looking for earlier
ICO (custom web page icons) disappear and revert to generic
That's all I can think of off the top of my head, I know there's more. I know some of this stuff will just take getting used to, but some of it sure seems like a step backwards......Yes I've had a few little things annoy me too - but the MOST annoying thing (so far... 24 hours in!) is that itunes now seems to stop streaming to my express as soon as my screen saver comes on - ie: I have itunes going all day usually, just streaming to my speakers in another room that are connected to an airport express. This is all this AE is for... and under Snow Leopard there was never any stopping of music because my imac went to sleep, but now, even as soon as a screen saver comes on, the music stops. I don't *really* want to disable screensaver and get the imac to be 'awake' all the time, but I can't seem to find a workaround - anyone else?
-
Different Scroll bars in one file
I've manually customized the look and feel of the scroll bars for scroll pane component and it works fine. I've two different files that have different visual styles for scroll bars. Now I want to merge these two files meaning I want to have one file with two different styles of scrollbars co-existing. I can resolve the naming conflicts but both of the them are using same asset names and action scripts (I think in the class definition).
So basically my question if how can I have two different scroll bars implemented in one file?
Many thanksYou can make the clip that you want to play at 2 fps seem
that way by just making it longer. Alternately, you could use a
timed tween. -
How can we remove the scroll bars from the table?
Hi,
I have a dynamic table. Currently the table appears with the scroll bars. But there is a requirement that the scroll bar should not appear and the table should stretch in the entire page. How can this be achieved.
Thanks in advance
NitaThanks Mohammad for the reply.
Was able to remove the scroll bars by using only the styleClass as AFStretchWidth. But there is a default partition in middle of the page still? Can i remove that too by any way. -
The status bar is pushed up at about 3/4 of the screen, so I can view only Firefox at about 1/4, good thing there is a scroll bar, but below the status bar is white display? can u please help me, I want to drag down the status bar so I can have a full view
== This happened ==
Every time Firefox openedYour code is absolutely unreadable - even if someone was willing to
help, it's simply impossible. I do give you a few tips, though: If you
understand your code (i.e. if it really is YOUR code), you should be
able to realize that your minimum and maximum never get set (thus they
are both 0) and your exam 3 is set with the wrong value. SEE where
those should get set and figure out why they're not. Chances are you
are doing something to them that makes one 'if' fail or you just
erroneously assign a wrong variable! -
Hi,
Suddenly while working with Firefox if I happen to drag the vertical scroll bar, a very abnormal behavior occurs. My screen dances up and down for a short time before either going black or getting restored but with no clicks working. The only way to resume is to force a restart of the system.
Any help would be deeply appreciated.
Thanks and Regards
DeepakThat didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?
Maybe you are looking for
-
How do you get Voice Memos off the iPhone and onto my Mac???
Is this yet another iPhone dead end?? I used the Voice Memo app that comes with the iPhone to record some rehearsals and now I want to move them to my Mac, edit them, make CDs, share online. I can't find any way to get them off the iPhone, unless I c
-
Algorithm to retrieve link of records from the database efficiently
Hi, I have some records in database related to supply chain. e.g. N1 supplies item I1 to Node N2 is represented as N1 I1 N2. Now I want to find all parent nodes or say chain of nodes supplying to particular node in an efficient way. Currently I am us
-
Loading and modifying a SWF file within an AIR application
I bet you get this question a lot, but I was wondering, if possible, anyone knows how to edit and save the changes to a SWF file loaded inside an AIR application? Thanks in advance!
-
Flatten transparency without lossy JPEG compression
Acrobat is using lossy JPEG compression (quality: medium) on some images after transparent objects were flattened. Even if the images had a ZIP compression before, Acrobat will use a lossy JPEG compression. The result is a loss of quality. There are
-
URGENT: Canon MF4350d (UFRII LT) driver not working on 10.6.4?
Hi, Up till recently, i've had no problems printing on my Canon MF4350d using my macbook pro. Just yesterday, I started to get 10322 errors, meaning to say that my printer is not supported by Mac. Ive tried downloading the latest drivers from the Can