Scroll bars pop up for just a second

Hi,
I am using states to show/hide a block of text in an itemRenderer. Acually it extends DataRenderer. I use a transition to change the size of the text block's container and then fade in the text. Sometimes for just a split second I see scroll bars pop up and then go away. I thought scrollbars were defaulted to off now. How do I stop the scrollbars?
Thanks.

Hi,
Using min/max width and heights can have a momentary effect on scrollbar artifacts, i'm not sure if this is an application wide thing or more subtle, I know that the only times I see this 'strange' behaviour is when i'm using mx containers and size constraints,  this is my thoughts on what is happening in some circumstances (could be wrong though)  a vbox initialises to constraints thinks its viewport requires scrollbars enables them then the sizing or overrides decide scrollbars aren't needed and the correct behaviour is enforced. This is not just vboxes as I have seen this at the application container level which leads me to believe it has something to do with embedded size constraints. One note, I haven't seen this behaviour in the last couple of engineering pre-release builds so its either fixed or I have just subconciously changed the way I am coding (also I am refraining from using mx display objects unless there is no other option).
David.

Similar Messages

  • When I turn on my iPhone 4S the apple logo pops up for a split second then the screen goes black but the phone itselfs boots up just fine???

    I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!

    Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones  trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

  • Scroll bar on legend for xy graph

    Is there a way to create a scroll bar for the legend of an XY graph?  The number of entries in the legend will be changing programmatically so the legend needs to be able to grow dynamically (which I have figured out how to do using property nodes).  Any ideas?
    Cheers
    CLA, CLED, CTD,CPI, LabVIEW Champion
    Platinum Alliance Partner
    Senior Engineer
    Using LV 2013, 2012
    Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

    Ultimately I will have 6 xy graphs in my vi, I would like to have a seperate scroll bar for the legend of each graph.  Each graphs legend will both grow and shrink as the program runs and I would like to use the scroll bar to keep the legend from growing off of the screen.  I would like to be able to dislpay the data from the point (6 m/s for example) along with its symbol on the xy graph (red dot for example) in the legend.  If I am umderstanding you correctly I need to bundle the type and color of the plot into a cluster with the data and then link that cluster to the scroll bar, I assume I can read the property node for each data point (setting it to active plot first) for both plot style and color?  Let me know if I am thinking about this correctly or if I have misinterpreted what you are saying.  Thank you very much for your help!
    Cheers!
    CLA, CLED, CTD,CPI, LabVIEW Champion
    Platinum Alliance Partner
    Senior Engineer
    Using LV 2013, 2012
    Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

  • How can I get the vertical scroll bar in firefox for mac to operate more smoothly?

    This scroll bar issue has been a real pain for awhile, though it seemed to be better for a period of time and now has grown much worse again. I'm using Firefox 22.0. I try to grasp the blue scroll bar (right side placement) to move it up or down for pages that require scrolling to view, and it is very hard to hold and move the bar, plus it often bogs down as the colored wheel shows up as if the software is trying to process the action. It's very frustrating. I'm set to "smooth scrolling" in the Firefox settings, but that doesn't help. Is there a way to fix this and make the scroll bar move quickly and smoothly in Firefox for Mac?

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • ITunes 11.1 Scroll bar suddenly missing for Playlists

    Yesterday I installed iTunes 11.1 on my iMac OS X 10.7.5. and everything was fine. However today, suddenly, the scroll bar for the Playlist column is missing, so can no longer access all my playlists.

    I discovered that, in fact, certain options are initially hidden. Go to Apple menu > System Preferences > General > and you can select Scroll bar options. I chose "Always". It would make more sense to me if Apple made you search for ways to hide things rather than ways to uncover them. Anyway, thanks eddie and jones for your help.

  • How do i render in FInal Cut Express? Every time i click render all the load box pops up for about a second and then disappears :(

    how do i render in final cut express? I am a film student and i've been using final cut for 2 years i have never had this problem. i click render all and the load bar comes up for a second and then flashes away, leaving all my shots unrendered? what is this? how do i fix this?:((

    Go to menu toolbar and to Sequence>Render All and ensure that all the items you need rendered are checked.
    Good luck,
    Russ

  • My IPad 2 will not start. I have tryed to reset and this still did not help.  After I reset the Apple logo comes on for just a second then is gone leaving a blank screen.

    My IPad2 will not start after pushing the home button and the sleep button.  The Apple logo is on for a short time then the screen goes black.

    i just wanted to know what will happen to all of my pictures and videos if i restore my ipad, i dont want to lose that stuff, also i tried to update my ipad, it tells me to plug it in to the computer and when i do, it shows on itunes its extracting the data or something like that, but it does not began the update process, after awhile it just brings up ipad device not found, and then my ipad dies so i charge and let it charge all day till night time and all that pops up is the plug in to the itunes image on my screen, so i need to know what to do, please help me.

  • Open and Save screen show for just a second then disappear.

    Hi-
    First time posting
    I can't save or open projects on occation. The save window will show for a secound then dispear. same thing when I try to open a project. The window will pop up then disapear.  I edit on my iMac and my macbook pro.  this only happens when working on the iMac. The only way I can work in primier today is by opening a "recent project". No issues on the macbook. Any ideas?
    Specs:
    running Adobe CC
    Operating system: X 10.9
    Processor 3.4 Ghz Intel Corei7
    Memory 32 GB 1333 MHz DDR3
    NIVIDIA GeForce GTX 680MX 2048MB
    Thank you

    Hi HishamTheMachine,
    Welcome to the forums.
    Please create new profile and check if you are able to launch the program in it. Please go to the link below and create a new profile. Reboot your machine one the profile has been created and then launch the program in it.
    http://support.apple.com/kb/ph4600
    If you are able to launch the application and work on it then you might have to repair the permission on your old profile.
    Regards,
    Vinay

  • No vertical scroll bar in IE for my Flex Project...

    Hi everyone,
    I'm having trouble getting a vertical scrollbar to appear when the browser window is smaller than the content within the .swf file that is automatically embedded into the html template that Flex creates on a release build.
    I fixed this issue with Firefox and Chrome by adding a style to the html template page that the .swf is embedded in.
    body {
         overflow: auto;
    I've even changed the fixed height of my main .mxml file to 100%.
    IE is still not showing vertical scrollbars when the browser window size shrinks smaller than the content inside the .swf.
    I'm perplexed.
    Any help is greatly appreciated.
    DK

    Yikes, posted this in the wrong forum...
    Anyway, found the trick, simple really..
    Just wrap the whole .swf in a <div> and define a static height. Wala!
    DK

  • Dropped my iphone 4s in toilet for just a second any suggestions?

    Hi, I dropped my iphone 4s in toilet, only for a sceond. It has no screen now, any suggestions? I retrieved all photos, but don't know how or if I can get apps and contacts   If you have any ideas?

    Water and electronics don't mix well. Most likely will need a new phone. Make an appt. at an Apple store for an out of warranty replacement. http://www.apple.com/retail/geniusbar/

  • I'd like an alphabet scroll-bar for my folders in Mail. Will this be added anytime soon?

    I've been using Mail for years and find it convenient for use across all devices, off-and online. I really like that I can place a rule so that each email will automatically be delivered into individual folders. This makes it easy to organize my emails for search purposes, and to keep a clean and relevant Inbox. Sometimes, depending on my internet connection....it can sometimes cease at home and my desktop will be in sleep mode, and my emails won't be automatically ruled into their appropriate folders. This is ok, because I just manually file them. However, I have many folders. It would be an added bonus if there is an alphabet scroll-bar in the folders source list to the left of the Mail app. screen.
    It appears that so much time and energy has gone into renovating the Mail application throughout the years, and the clean design and ease of use is noticeable and appreciated. I feel they would be complemented by the scroll-bar.
    I'm just wondering if Apple has this in mind for any new updates to Mail?
    Thanks!

    Apple doesn’t routinely monitor the discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • Scroll bar for iview missing

    Hi,
    i just created an iView ,
    but scroll is not active for this iView so i can scroll to below content ,to see the below content user has to use Tab.
    This is an ITS iview.
    Please help

    Hi Indira,
         we have similar problems with vertical scroll bar is missing for few transactions when we use SAP Gui for HTML , our enviroments recently upgraded ,we created customer message and they replied back saying Next Support Package(of ITS 700)will have fix for this problem,
    but did not mentioned about estimated dates on that.
    Thanks
    suneel.

  • How do I get the scrolling bar to stop popping up when I'm connected to the iTunes Store? It wont allow me to type in the search bar when it pops up.

    When I am connected to the iTunes Store a scrolling bar pops up which says "accessing itunes store" even though I'm connected.  It pops up every time i try to type a letter in the search bar, not allowing me to type.  I can type 1 letter in then it pops up.  Very frustrating.

    Do you have disk use enabled? If so, disable it.
    Check iTunes/edit/preferences. With the iPod connected of course. : )

  • Window scroll bars for toolbar canvases

    Is there any way for window scroll bars to work for toolbar canvases. I am working in Oracle Forms 6i.

    deleted - wrong forum, try the swing posting

  • RoboHelp 8: Vertical scroll bar problem

    I just installed RoboHelp 8. When I view a topic page that is longer than the window, sometimes the vertical scroll bars appear and sometimes they don't. If I click the <> HTML tab and then click the Design tab again, the scroll bar appears. The scroll bar also appears if I click the "Save" or "Save All" button. I also don't see a Service Pack for RoboHelp 8. Is that true?
    I'm attaching 2 screen shots (both of the same topic) - one when I first go in to a topic and the scroll bar does not appears and one when I go to the HTML tab or Save and then scroll bar appears.

    Hi there
    No, there is no service release for version 8 as yet.
    Could it be simply that focus is inside another pod when you fail to see the scroll bar? Perhaps you have clicked to select the Single Source Layouts pod and you see the scroll bar goes away?
    Just guessing here... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

Maybe you are looking for