Scroll to Error message

Hi,
My form has many fields. When I get an error I want the screen to set focus to top of page. I even have message area at the top. but the focus is not going to top of the page.
I tried below methods.
1)Created an event(setFocus) in compcontroller and calling this from a method(focustop) in comp controller. When I get an error I am calling focustop method .
2) I tried the same but this time create an event and method in interface controller.
both are not working. not sure how to proceed. any thoughts?
Thanks,

Self Resolved

Similar Messages

  • Scrolling to error message

    Hi,
    I have a view in web dynpro which is (usually) larger than the complete screen, which means, the browser will add a scrollbar for this view.
    But if I display an error message, the message is displayed at the bottom and the browser doesn't scroll down.
    Thus my question: is it possible (in the wdDoModifyView()) to force the browser to scroll down completely e.g. show an element at the bottom of the page?
    Thanx for your help.
    Greetings.
    Achim

    Hi Achim,
    As Valery suggested, by using 'view.getElement("<UI_ID>").requestFocus()'
    you can set the focus on any UI element you like, but don't expect a uniform 'focus setting behaviour' for all UI elements atleast in sp13. For eg: For a DropdownByKey, it works perfectly with the scrolling happening in the desired manner. But for a TextEdit, the scrolling doesn't happen, though the focus is set to that UI element. In the case of a 'DropDownByIndex', it doesn't even show the focus.
    You can also throw a context attribute exception for the attribute bound to the corresponding UI element. This would highlight that UI element in red colour.
    Hope this helps,
    Best regards,
    Nibu.

  • Error message too big to fit onto screen and I can't scroll down

    I have compiled an email with a lot of addresses cc'd in it and the mail programme is bringing up an error message when I try to send it. The trouble is that the error message is so long that I can't see the end of it and it won't scroll down so I can't see what the options are to react to it. I have tried all sorts of fixes. Any suggestions?
    Already tried:
    -Changing the screen resolution
    -using the tab key to try to select different options then pressing enter
    -simply pressing enter (this has the effect of trying to send the message later I think, but the same problem comes up again so I am stuck in a never ending loop, unable to fix it!)
    - dragging to the trash (it won't let me)
    using the mouse to try and drag the corners of the message in (works for the email, but not for the error message)
    Please help - this is driving me crazy!
    thank you!

    I think you're going to have to find & delete that particular one without Mail running, then redo it it with maybe 33 per send.
    I'd get EasyFind...
    http://www.macupdate.com/info.php/id/11076
    Here's a direct download link to EasyFind 4.0 which runs in 10.3.9 & up...
    http://www.devon-technologies.com/files/legacy/macosx1039/EasyFind.dmg.zip
    From this page,
    http://www.devon-technologies.com/support/faqs.php?p=default&cat=19
    Freeware applications:
        * EasyFind 4.0
        * PhotoStickies 5.6
        * ThumbsUp 4.3
        * XMenu 1.8
    http://www.versiontracker.com/dyn/moreinfo/macosx/8707
    Use it to search your whole drive for case insensitive & show invisibles...
    .emlx
    (dot ee em el ex)
    Then sort by Date, look for about the last one datewise.
    Find Any File...
    http://apps.tempel.org/FindAnyFile/

  • TypeError: Object [object Object] Error message on website with parallax scrolling

    My website, www.suchudance.org is having some error issues that have never surfaced before.
    This is the error message I receive on a webpage that has never had this error before:
    " MusejSassert: Error calling selector function: TypeError: Object [object Object] has no method 'on' "
    I have parallex scrolling on the "tickets.html" page and that page, all of a sudden is no longer loading until I click on the Ticket menu button.
    Does anyone know what is going on?
    Thanks,
    Vipul

    Hi Vipul,
    I am having trouble getting this error. I opened your site and previewed it in the browser, using Chrome, Firefox and Safari. I tried going to the tickets.html page using the url and using the menu on your site but both gave me the same result and no JS assert. Is there something I'm missing? Is your site right now (http://www.suchudance.org/tickets.html) the expected result or are you getting the error on that as well?
    Thanks!
    Dana

  • Too many addresses - unable to scroll down in error message

    I composed a message with a couple of hundred addresses to send on gmail. The message bounced back with an error message saying that the email could not be sent with the server. The list of addresses that could not be sent start about 1/4 of the way through the complete list that was on the original message which gives me the impression that the list was simply too long.
    I know there are instructions at the foot of the list, but I can't find a way to scroll down to the bottom of the list because it goes off the bottom of the screen. The message no longer shows in drafts or the sent file. When I do a force quit and restart the message comes up in the same format and I'm unable to do anything with it because the instructions are off-screen below.
    Any ideas on how to deal with this?
    GW

    First, check all your relevant System Preferences.
    Scroll bar prefs are in Appearance, mouse behaviour is in Keyboard & Mouse, and finally check the settings in Universal Access also.
    If all those check out, are you running a 3rd-party utility that might affect mouse / scroll behaviour? Use Activity Monitor to see everything that is running on your machine.

  • When I want to scroll through My picks why do I get this Error message (A necessary data reference could not be resolved."

    When I want to scroll through My pictures  why do I get this Error message (A necessary data reference could not be resolved)

    Before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

  • HT2513 cant scroll down on error message saying your calendar couldnt be refreshed?

    I have tried to copy too much into my calendar and it now has an error message saying 'Your calendar couldn't be refereshed' - I cant scroll down to the bottom of the message it seems to be locked so cant quit it..... this has locked my entire calendar - any ideas?? can I somehow delete the last days activity on my calendar which would solve the problem?

    I have tried to copy too much into my calendar and it now has an error message saying 'Your calendar couldn't be refereshed' - I cant scroll down to the bottom of the message it seems to be locked so cant quit it..... this has locked my entire calendar - any ideas?? can I somehow delete the last days activity on my calendar which would solve the problem?

  • Can't scroll down on error message saying "your calendar couldn't be refreshed"!

    I had tried to copy too much into My Calendar; now it has entered an infinite loop error: message saying 'Your calendar couldn't be refreshed'. I cant scroll down to the bottom of the message it seems to be locked, thus can't quit it. This bug has locked my entire calendar. Can I somehow delete the last  activity on my calendar which might solve the problem?
    Tried to force quit the app a few times and even rebooting, though the problem remains and each time I reopen My Calendar, the error message pops up, prohibiting me from do anything on this app.
    Thank You

    Please read this whole message before doing anything.
    Back up all data.
    Before taking each of these steps, quit (force quit if necessary) the application. After taking the step, relaunch and test. When the problem is resolved (or when you complete Step 3 without resolving it), stop and close the Library folder.
    Step 1
    Hold down the option key and select
    Go ▹ Library
    from the Finder menu bar. From the folder that opens, move these subfolders (some may not exist) to the Trash, leaving the Library folder open:
    Caches/com.apple.CalendarAgent
    Caches/com.apple.iCal
    Saved Application State/com.apple.iCal.savedState
    Step 2
    Move these files from the Library folder to the Desktop (again, some may not exist):
    Preferences/ByHost/com.apple.iCal.helper.*.plist
    Preferences/com.apple.CalendarAgent.plist
    Preferences/com.apple.iCal.Alarm.plist
    Preferences/com.apple.iCal.AlarmScheduler.plist
    Preferences/com.apple.iCal.helper.plist
    Preferences/com.apple.iCal.plist
    Preferences/com.apple.iCalExternalSync.plist
    Preferences/iCalExternalSync.plist
    Here "*" stands for a long string of letters, numbers, and dashes. If the application now works, you may be able to put back some of the files you moved in this step, relaunching and testing after each one. Eventually you may find the one that caused the problem; delete it. Recreate your settings as necessary.
    If the application still crashes, put back each of the files you moved in this step, overwriting the one that may have been created in its place. You don't have to put back the folders you moved in Step 1.
    Step 3
    Move this folder to the Desktop:
    Calendars
    Note: you're not moving the Calendars application; you're moving a folder named "Calendars". If there's no change, put the folder back where it was.
    If the application launches after you move the Calendars folder, the event database is corrupt. You have two choices:
    Restore the folder from a Time Machine snapshot or other backup that predates the corruption.
    Use a third-party application such as Calendar Cleaner to try to repair the database.

  • Error message when upgrading to 7.3.2.6

    I just (attempted to) upgrade to 7.3.2.6 (and after the install, it all seems OK for now) - but during the install, I got a "files in use" error message window, mentioning that Windows Explorer was running (Process Id: 432), giving me the option to Retry, Ignore or Exit.
    I tried all options - I even Exited and rebooted - and re-upgraded after that, but keep getting the same error... So far iTunes seems to have upgraded and appears to be working - but could the install have missed some components now - and therefore should I expect trouble ahead?

    Yes, i had the same error message after upgrading to 7.3.
    I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
    Search this forum - i hope you find a solution.

  • New preview function for iPad–error message "Multiple page sizes not supported"

    When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x  1296. I would really like to preview this folio before publishing. Any suggestions?

    If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

  • I purchased Elements 13.  When I tried to install I get the error message that it is not supported by Vista.  Now what do I do?

    I purchased Elements 13.  When I tried to install it I get the error message that it is not supported by Vista.  What do I do now?

    If you can't install Windows 7 or higher or get a new computer with Windows 7 or higher, you won't be able to run Photoshop Elements 13.
    There are many inexpensive refurbished or "off lease" computers available at very reasonable cost.  Here is one example (scroll down):
    Computers & Tablets, Desktop PCs, All Desktop PCs, Refurbished - Newegg.com

  • On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

    I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
    "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
                  Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
    If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
    I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be  wonderful.
                 I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                      ThanQ SO very much!
                                                                             [email protected] or [email protected] or [email protected] .
                                                                                               You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                                that's my Facebook "handle".    ThanQ 4 taking the time 2 read all of this!
                                                                                                hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                                as marking this page in my FAVORITES so I can find it fast! Take Care!!!

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

    I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

    One thing that might help.
    1. open itunes preferences from the edit menu and click on the devices tab.
    2. check the box to disable syncing for iphones connected to itunes and click ok.
    3. Then click the button to reset sync history.
    4. Now click ok to close the preferences window.
    5. connect the iphone to itunes and go to the info tab.
    6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
    7. then click apply on the bottom right of itunes.
    This will overwrite any events on the iphone, including any events that has become corrupted.
    Hope this helps

  • Can't sync iPhone to my mac. Strange error message.

    I just tried to sync my iPhone to my mac, and got the following error message:
    "iTunes could not sync contacts to the iPhone "MyiPhone" because the iPhone disconnected."
    First of all... my iPhone did not disconnect, I am looking at it under "devices" in iTunes and iPhoto right now.
    My operating system, iTunes, and iPhone all have their software completely up to date.
    I notice that this happens just after iPhoto opens... I have no idea what the problem is. My only idea is that maybe it is the USB cable I'm using. But this is the first time this has happened, and the iPhone didn't show any signs of disconnecting.
    Anyone know what is going on and what I should do???

    I just read a message from someone with the same problem (posted after I posted my message) and someone resolved the issue...
    For anyone else wondering... it was apparently a corrupted file. In iTunes click on your iPhone, then the Info tab, scroll down and click the replace contact info tab, and it should solve the problem.

  • Error message: There was an error processing a page. There was a problem reading this document (110)

    I opened a pdf document in Adobe Reader X. When I attempted to scroll through the pages the following error message appeared, “There was an error processing a page. There was a problem reading the document (110). After an Internet search to try to find the reason for the error and a solution, I came across a site that suggested it was an issue regarding the fonts of the document. I then reopened the document and went into the document’s font properties (FILE – PROPERTIES – FONTS tab). There I noticed that the “Gathering font information” stopped at 2% which, of course, I took to mean that Adobe Reader X was having a difficult time in loading the font’s information. Another site suggested opening the document in the pdf reader, Foxit. So I did, and the document loaded properly with no error messages. I was still curious as to why the document did not load entirely in Adobe Reader X and if the same problem would occur using a different reader. I then downloaded the pdf reader, Nitro Reader 2. I opened the same document and initially received the following message, “The requested page number is invalid and does not exist in this document.” I closed the message and proceeded to scroll through the document. As I scrolled, the following message appeared, “This file was damaged (corrupted) and has been repaired.” I thought, “Wonderful!” I then chose <FILE – SAVE AS – PDF DOCUMENT> and saved the “repaired” document under a new name. When I opened the “repaired” document with Adobe Reader X, behold, the document opened entirely with no error message. I was curious, so I went into the document’s font properties and noticed, this time around, that the “Gathering font information” loaded to 100%. Nitro Reader 2 detected the error and fixed it. Now I’m left to wonder…why wasn’t Adobe Reader X able to do the same? I hope this post helps others who are experiencing the same issue.

    When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
    I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
    Read below:
    1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
    1.2. No document security was applied of any sort on the file.
    1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
    1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
    1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
    1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
    1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
    1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
    1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
    1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
    1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
    1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
    1.13. Sorry for so lengthy instructions, but I had no choice.

Maybe you are looking for