SCUL error Distribution with errors

Hi Every one,
CUA is working properly for all users, except for one idoc which has failed as "Distribution with errors". This user is successfully created in all other (10 systems) system without any issues, but only to one particular system it is failing (only one user). When I checked in WE05, with the idoc number, direction '1' in CUA, it shown green sign with 03 status, I can't find this idoc in child system. Please advice.
Thanks in advance,
Sushma
Edited by: sushmaraok on May 17, 2011 11:43 AM
Edited by: sushmaraok on May 17, 2011 11:53 AM

Hi Sushma,
It may be the case that there maybe a time delay for the child system to process the request from CUA and revert back to CUA.
In ideal situation and most of the times it works on real time basis. If you monitor your CUA-Child lanscape continuously you can find a pattern. For eg, in my landscape XI system takes 20min approx for reverting, hence no need to worry immediately. You can check whether the changes are reflecting in the child system and move on.
If you query is only on how to find the Idoc on Child System. You can follow the below steps.
(1) Note the Failed IDoc Numbers along with time stamp in SCUL.
(2) Go to Txn 'WE05' in Child system & Enter the Data and Time in the options. Suggest that you give plus and minus 2mins from the time in CUA ie., if time is 14:41:12, you may give 14:39:00 till 14:43:00. And Execute.
(3) Sort the Displayed List by "Date & Time".
(4) From the Displayed list, select the Idoc and you can see the 'T100 Text' message in Idoc that shows which user is afftected after a 3sec delay.
(5) Scroll down till the relevant user is found & double-click the IDoc.
(6) Click on the "Services for Objects" icon at top and select "Relationships"
(7) In the new box, you can find the Originating Idoc number from CUA.
Hope this Helps.
Incase you believe any of the above information was helpful, request you to kindly award some points. If this revert helps solve the thread, request you to kindly award full points and close the thread.
With Regards
Ganesh.S

Similar Messages

Backup error finished with error on DEV Server

Dear all ,
Online backup finished with error . pls check the below logs .
BRBACKUP Show action/Deatils :
BR0018I Waiting for the next offline redo log file...
BR0056I End of database backup: bedtrieb.ant 2010-07-28 11.27.20
BR0280I BRBACKUP time stamp: 2010-07-28 11.27.20
BR0052I BRBACKUP completed successfully
BR0280I BRBACKUP time stamp: 2010-07-28 11.27.20
BR0291I BRARCHIVE (action ID aedtrieb) will be started with options '+bedtrieb.ant,154235420672,IRDB01,41:749782 -jid ALLOG20100728104441 -d tape -c force -p initIRD.sap -cds'
BR0280I BRBACKUP time stamp: 2010-07-28 11.32.18
BR0261E BRBACKUP cancelled by signal 15
BR0056I End of database backup: bedtrieb.ant 2010-07-28 11.32.18
BR0280I BRBACKUP time stamp: 2010-07-28 11.32.18
BR0054I BRBACKUP terminated with errors
BRARCHIVE Show action/Deatils :
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0351I Restoring /oracle/IRD/sapreorg/.tape.hdr0
BR0355I from /dev/rmt3.1 ...
BR0278E Command output of 'LANG=C cd /oracle/IRD/sapreorg && /usr/sap/IRD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt3.1':
Cannot create <.tape.hdr0> (errno:13)
10 blocks
.tape.hdr0
BR0280I BRARCHIVE time stamp: 2010-07-28 11.32.04
BR0279E Return code from 'LANG=C cd /oracle/IRD/sapreorg && /usr/sap/IRD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt3.1': 2
BR0359E Restore of /oracle/IRD/sapreorg/.tape.hdr0 from /dev/rmt3.1 failed due to previous errors
BR0218E Checking label on volume in device /dev/rmt3.1 failed
BR0280I BRARCHIVE time stamp: 2010-07-28 11.32.04
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0007I End of offline redo log processing: aedtrieb.cds 2010-07-28 11.32.18
BR0280I BRARCHIVE time stamp: 2010-07-28 11.32.18
BR0005I BRARCHIVE terminated with errors
Kindly advise

Hi Varathu,
i got error at the end of BRarchive .... Kindly check the last few lines of Archive log ...
BR0014I 51 of 52 offline redo log files processed - 2075.860 of 2080.542 MB done
BR0204I Percentage done: 99.77%, estimated end time: 14:29
BR0001I **************************************************
BR0202I Saving /oracle/IRD/oraarch/IRDarch1_13485_660949939.dbf
BR0203I to /dev/rmt3.1 ...
#ARCHIVE.. /oracle/IRD/oraarch/IRDarch1_13485_660949939.dbf
#SAVED.... IRDarch1_13485_660949939.dbf IRDB02/364
BR0280I BRARCHIVE time stamp: 2010-07-27 14.29.25
BR0014I 52 of 52 offline redo log files processed - 2080.542 of 2080.542 MB done
BR0204I Percentage done: 100.00%, estimated end time: 14:29
BR0001I **************************************************
BR0016I 320 offline redo log files processed, total size 13300.875 MB
BR0202I Saving space_log
BR0203I to /dev/rmt3.1 ...
BR0202I Saving det_log
BR0203I to /dev/rmt3.1 ...
BR0202I Saving sum_log
BR0203I to /dev/rmt3.1 ...
BR0280I BRARCHIVE time stamp: 2010-07-27 14.29.43
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0351I Restoring /oracle/IRD/sapreorg/.tape.hdr0
BR0355I from /dev/rmt3.1 ...
BR0278E Command output of 'LANG=C cd /oracle/IRD/sapreorg && /usr/sap/IRD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt3.1':
Cannot create <.tape.hdr0> (errno:13)
10 blocks
.tape.hdr0
Kindly suggest

Oracle Alert erroring out with error code APP-ALR-04106

Hello everyone,
I have an alert with its SQL well parsed and all the alert setups are correctly done.But then,it errors out with the following message in the concurrent log file.
APP-ALR-04106: Please correct the user-defined SQL statement for this alert.
What does the message mean?Any suggestions?
Thank You

Hussein,
After applying the patch,the alerts are working fine,But the patch mentioned included many other fixes,as it took 2 hrs to apply and is 44 MB.Now that we know the driver file names(from patch log file),will it be possible to pick only those files corresponding to ALR in the patch and apply?
Thank You

PST Capture Import errored: Complete with errors.

we did a migration from Exchange 2007 to 2010, we already have PST files and want to import them using PST Capture to the new Mailboxes in the new domain.
while importing we were faced with an error saying "Complete with errors, hresult e_fail has been returned from a call to a com component", in the IPM subtree.Any solution to address the problem?
thanks in advance.

Hi,
Please double check whether the .pst files imported successfully (ignore the error message first).
If there is anything corrupt, I suggest remove the request and re-import it for testing.
Since I am not familiar with the PST Capture Tool, I suggest asking Script Center for help to get a script to perform the .pst files importing. For your convenience:
http://technet.microsoft.com/en-us/scriptcenter/dd742246.aspx
Thanks
Mavis
Mavis Huang
TechNet Community Support

After installing the last version of iTunes, it failed to lunch and gave me 2 Error messages with Error 7 title , rebeat installation several times with the same Error message, what shall I do?

Once I finish upgrading iTunes on my Windows PC, I had an Error as t shown on the image below which doesn't allow the iTunes App to lunch.
Please advise what shall I do ?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Opening my datalog file errors out with error 42 generic error

I'm using the datalog API to store video images flattened to string (the record type is string). This works great most of the time, and gives me easy access the whichever frame I currently want. My files are between 15 and 125 MB. Occassionally when I try to open a file, the Open/Create/Replace Datalog primitive returns error 42, which is a generic LabVIEW error. The file appears to be the right size and looks as correct as I can tell in a hex editor. I'm guessing it's some sort of parsing error, but I don't know the datalog API binary format. I'd really like to recover these files that are throwing the errors. Any ideas?
Robert C. Mortensen
Certified LabVIEW Architect
Certified LabVIEW Embedded Systems Developer
Endigit

Greetings FlamingYawn!
I apologize for the trouble you're having opening some of your saved datalog files. Unfortunately, as you have already mentioned, Error 42 is a general error and as such, provides us with little information that we can use in troubleshooting the issue. From all the research I have done, it seems that the two most common causes of this type of problem are from a logic error in the writing section of the code or from the files being corrupted by some other means during the write (i.e., from bad sectors on a hard disk). Unfortunately, the file type is a proprietary binary format and the structure is not publicly known. We currently do not have any tools for use in reading these files outside of LabVIEW. This is not necessarily to prevent the files from being read by other software but simply because it is a file type that was designed specifically for LabVIEW. The best information I can provide you with is related to the file header. This can be found in the following KnowledgeBase article:
LabVIEW Data Logger: Binary Header File Format
http://digital.ni.com/public.nsf/allkb/747B83B6C8E4A6218625669100563B61
If it is at all possible, please try to see if the same set of data produces the same error each time following the write/read sequence. If this is in fact the case, I can work with you further to file a Corrective Action Request so that the developers can address the issue.
I hope this helps some.
Best Regards,
Michael G
Michael G.
Applications Engineer
National Instruments
Self-realization: I was thinking of the immortal words of Socrates, who said, "... I drank what?"

I was referred to this site when I looked for answers to why I got Fatal Error message with error code c0000005 when trying to upload photos to my computer. I see that someone else asked the same question, 90 people viewed but no answer given?

I was referred to this site when I got Fatal Error message Error code c0000005 while trying to upload photos to computer. Someone else asked the same question in this forum, 90 people viewed the question but it was never answered?

It looks to me like it is a problem on your Windows computer not being able to start an application. See the following link to Microsoft Community support (although the specifics of the problem in that case may not be applicable) and also note all of the "Related Content" at the upper right side of that link (and there may be others if you search that forum). http://answers.microsoft.com/en-us/windows/forum/windows_7-system/the-applicatio n-is-unable-to-start-correctly/bbb9c037-77b3-4fae-93b9-ded70f7f9a17
It may help if you know or can determine which program Windows is trying to open when you upload photos -- there can be many different ones and it can be set by the user. If you are using Windows 7, you may need to check your Autoplay settings. There are some instructions in the following link that may help and that discuss how you can use Windows Explorer to manually transfer the photos: http://support.apple.com/kb/HT4083

ALE errored out with error message 127

Hi all,
       We have a process where we trigger an ALE of INVOIC type using output type in invoice document. When I saw some time back, i encontered following error message "
Object 0009543773
Output type: ALE Invoice
B1   ALE group messages   127 No partner profiles (message control) maintained
When I tried today, I am not getting this error. I didn't do any changes. I am worried that this might happen in production as well. I am curious to know why this error happened earlier and why it is not appearing now. Also, a remedy action if this happens in production.

Hi sudhakar,
can u post the solution for this problem pls.so tht it can be helpfull to us.
Regards,
Sameer

E01(technical error) bdocs with error "message is empty "

Hi all,
While monitoring bdocs using SMW02, we found some bdocs are in error state E01(Technical Error).Details are
Bdoc type : MKTPROF_MSG
state : E01 (Technical error (incomplete) )
Error text : message is empty & Service that caused the error CRM_MKTPROF_MSG_MSA
Could anyone tell me how to clear these bdocs.
Regards,
PV.

Hi PV,
Its looks that your mobile bridge is active. If you are not using mobile clients or If marketing objects are not required on the mobile clients, you may deactivate the Mobile Bridge for these objects.
To deactivate the MOBILE BRIDGE for marketing objects, proceed as follows.
Use Transaction SE16 to call table SMW3FDCUST.
Remove the 'ACTIV' flag for the following BDoc types:
CHARVAL_MSG
CHAR_MSG
MKTPROF_MSG
PFTPL_MSG
And then reprocess your BDocs. This should solve the problem.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Client export SCC8 - ended with errors

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

Client Export ended with errors

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds)         :          9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

In Al11 what does DIR_TRANS pointing to?
Make sure you have enough space there as it will export the 2 files to the transport directory.
Have you tried Remote Client Copy.
Thanks
Adil

Terminated with error: REP-1924: Cannot locate the font file 'Arialbd.ttf'

hi all
i am using Application server 10g R2 while running report i am getting the following error
Terminated with error: REP-1924: Cannot locate the font file 'Arialbd.ttf'
i configured the Reports_Path
with C:\windows\fonts if anyone faced the same problem plz help me.

hi
if you have problem you can post your own thread and we will try to help you.
sarah

Terminated with error: REP-300: ORACLE error occurred

We have OAS 10g on solaris.
When trying to generate a report we get the error : Terminated with error: REP-300: ORACLE error occurred
The report has been running fine until yesterday and today we are getting the error. I did not find anything relvant in metalink.
And no changes have been to the report.
Can anybody suggest me what to look yet or any possible things that might cause the error. The tracing is not enabled.
Thanks

Found out it was a data error.
thanks

Terminated with error:REP-56048:Engine rwHighEng-0 crashed

Hi Friends,
When i run a report using Oracle 10g IAS,i get an error:
'Terminated with error:REP-56048:Engine rwHighEng-0 crashed'
Anybody have the solution to handle it.Pls help!Thank you very much!

Hi to all,
Since the last couple of days we are having a problem with Oracle Reports.
Whenever we run these reports, it behaves erratic.
The report comes normal for the first few reports, then suddenly the server gets hanged and no reports can be generated.
OS on Application server is Windows Server 2003.Os on client machine is XP and Vista
Error is as below in Application Report Server status
Terminated with error: REP-56048: Engine rwEng-0 crashed, job
Any immediate help is appreciated
Thanks
Nilesh

Terminated with error: br REP-56048: Engine rwEng-0 crashed, job Id: 5778

while running report i m getting following error
Terminated with error: <br>REP-56048: Engine rwEng-0 crashed, job Id: 5778
I m unable to trace what is wrong currently i m using report application server 10.1.2.3.0 and delimited as desformat.
I have already used jvmoption and delimiteddata.
but both failed to solve the problem as jvmoption does not work in my case and delimiteddata has expected format problem.I want to use delimited option so what is the problem with engine that it crashes on the few reports.
regards,
kaushal

How many MB of SGA + PGA is assigned its BD?
Do the following:
1. It is necessary to modify the engine definition to include :
jvmOptions="-Xmx512M -Xms128M -Xss512k"
How to do it, depends on the version of Report Server in use :
a. For version 10gR2 (10.1.2.x) :
Backup your Reports server .conf file and Modify the rwEng parameters and add :
jvmOptions="-Xmx512M -Xms128M -Xss512k"
b. For version 11g (11.X), this has to be done through Enterprise Manager. In Enterprise Manager, locate your Report Server and go to "Basic Configuration" page then insert :
-Xmx512M -Xms128M -Xss512k
into the field "JVM Options" and "Apply" your changes.
* The important option is "Xss" that sets the maximum stack size that can be used by C code in a thread.
3. Restart your reports server and try to run again with DESFORMAT=SPREADSHEET

SCUL error Distribution with errors

Similar Messages

Maybe you are looking for