SCUP Publishing - CM 2012 R2: What RBAC rights are required?

Hi,
I have integrated SCUP 2011 with CM 2012 R2.  CM 2012 R2 is being used in a very large environment.  I would like to allow a small team within my organization the ability to publish updates using SCUP to CM 2012 R2.  Currently, I am doing
this job using an account that has full rights to CM 2012R2.
What is the minimum level rights needed to publish SCUP 2011 updates to CM 2012?

The real thing of publishing updates via SCUP is not part of RBAC, because SCUP only publishes the information to WSUS. If you mean the permissions required to work with the update data in ConfigMgr then the out-of-the-box answer would be the
Software Update Manager role. Simply because after the updates are synced into ConfigMgr, they need to be treated as normal updates.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

  • Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?

    Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?

    Some saved Mac links that may help
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • Creative Cloud notification "Administration rights are required-" but nowhere to enter credentials

    I told Creative Cloud (the menubar balloon) to go ahead and install CC 2014 updates, and left the computer to update. Later, I had to reboot the computer due to a power failure (all items now show as "Up to date" in the Apps tab). But I'm getting Notifications every 10 seconds saying, "Creative Cloud. Administration rights are required to complete Adobe Add-ons installation or removal." I'm happy to provide those credentials, but there is nowhere to type them! I've looked in all the tabs in the Creative Cloud balloon, and displayed all windows (so it's not hidden under something else).
    SOLUTION: I quit Creative Cloud, then opened Creative Cloud again. The notifications are no longer displaying, and applications are all up to date. Apparently something was confused by the power outage.

    Some 10.9.3 links
    -next link says After Effects, but check YOUR permissions !!!
    -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -and https://forums.adobe.com/thread/1507936
    -Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • What SAP modules are required for insuance sector

    what SAP modules are required for insuance sector

    Hi,
    Following authorizations are required to be able to use all the functions of Support Package Manager:
    S_CTS_ADMI
    S_TRANSPRT
    Additional objects required and which can be used to restrict further the functionality are:
    S_C_FUNCT
    S_CTS_ADMI
    S_DATASET
    S_GUI
    S_RFC
    As available in the SAP help,standard SAP S_A.SYSTEM contains all necessary access for importing support packages.
    Regards,
    Nagendran

  • Administration rights are required

    Hi, Ever since the recent upgrade to CC2014 I'm getting a dialog box saying:
    Creative Cloud
    Administration rights are required to complete
    Adobe Add-ons installation or removal.
    I then have to enter my administration password every morning and it's a pain.
    Any ideas how to stop this.
    Thanks for your help

    Same basic problem. Every morning I get the "Administration rights are required to complete Adobe Add-ons installation or removal" notice and it pops up everytime an Adobe CC 2014 app opens.

  • Keep getting popup on Mac saying "Aministration rights are required to complete Adobe Add-0ns installation or removal" Where?????

    Keep getting popup on Mac saying "Aministration rights are required to complete Adobe Add-0ns installation or removal" Where????? And how to correct this?

    If the previous advice does not work, read the link below
    This link says After Effects, but check YOUR permissions !!!
    -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  • Keep getting notifications on my mac "Administration rights are required to complete Adobe Add-ons installation or removal" its really annoying how do i stop it?

    iHi after the big update of last week i keep getting notifications "Administration rights are required to complete Adobe Add-ons installation or removal"
    How do I stop this..it's really annoying..

    I am Windows, but some saved Mac links that MAY help
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • BODS / SAP : what set-ups are required for communicating with each other ?

    Hi.
    There is a new SAP system
    And there is a new BODS installation.
    Both on independent server machines but on the same lan network.
    On the test system of BODS. We tried to see how the communication happens with SAP.
    While we try some test jobs by trying to pull a simple table on SAP R/3
    In Dataflow, we used simple SAPR/3 ABAP flow. And put it into target database thro query transformation.
    In the datastore,
    We used the Generate and Execute option,
    with a path on the local directory of BODS server for creating the ABAP program and the dat file.
    However,
    We are always getting error on batch job schedule.
    Although the user is having rights on the R/3 table
    And can login into SAP R/3 system and check the table.
    Still we get an error saying Databstore unabel to connect to R/3 system. Check for user login etc.
    For anyone whose login we use. We get the error.
    However, if i directly generate the code on the ABAP flow (without running the job),
    make the program available on R/3 system.
    and then run the job as execute preloaded
    this works fine without any error.
    and we are able to see the data in the target table.
    Now both the systems are new.
    And am not aware of the initial set-ups which are required for communication between SAP / BODS.
    Are WE missing something on the SAP side setups - for generate and execute option to be used?
    Is there anything specific to be done for ease of the communication between SAP server and BODS server in this regard.
    Can anyone share some inputs on this.
    Actually for any user with full admin rights too, on the sap side, if we use the user login for R/3 connectivity for this particular "generate and execute" option,  it errors out after nearly 10 minutes. Then the error says, login info not correct.
    So basically, the communication channel by itself between SAP R/3 and BODS seems to be locked somewhere.
    If anyone with SAP admin expertise - can help or advise on this.
    Many thanks
    Indu
    Edited by: Indumathy Narayanan on Sep 13, 2011 9:20 PM

    Getting data out of R/3 requires two distinct setup tasks, and they don't have much to do with each other.
    The first basic task is to get the little ABAP extraction programs loaded and run in R/3.  You can pre-load them and then call them, or generate, upload, and execute them all on-the-fly, at BODS runtime.  During development, use "Generate and Execute" for your ABAP.
    Once that's done, you have four different choices to get the data back: "Direct download", "Shared directory", FTP, and "Customer Transfer". Normally, you'll use either FTP or "Shared directory".  Refer to the documentation (the BODS SAP Supplement) for a description of all this.
    In all cases (or at least, quite certainly, using the FTP and Shared Directory methods), the ABAP extraction programs are directed to plop their output as flat files in the "Working directory on SAP server."  For testing, you can look in that folder to see if any flat files are appearing when you submit an ABAP data flow.  If not, then either 1) your ABAP program isn't getting in there (a Basis admin should be able to tell you), or 2) it's not running (ditto), or 3) it's running but unable to generate the output file (ditto), because a) SAP isn't permitted to write to that folder, or b) the folder doesn't exist (it needs to be defined from the perspective of the SAP server).
    If you do see files appear in the "Working directory on SAP server" when you run a BODS job w/ an ABAP dataflow, then the problem is that BODS can't fetch them.  If you're using the "Shared directory" method, which is suitable for and often used in all-Windows environments, then the account under which the Job Server in question is running must have access to the "Working directory on SAP server," but this time from the perspective of the Job Server.  So if, for instance, SAP was directed to put the flat files on a local folder, say, "E:\USR\SAP\BODS", then you might want to share this folder out as, for instance,
    sapdev1\bods (for an SAP host called "sapdev1"), and then enter "
    sapdev1\bods" in the "Application path to shared directory" field, in your SAP datastore configuration.  If your Job Server service is logging-in as "Local System," though, it won't be able to get there -- it needs to log-in as an AD domain account w/ rights to that share.  Get it?  Try logging in to your BODS job server computer with the AD "service account" setup for use by the Job Server service, and try to open a file on the "Application path to shared directory". If you can't, then BODS won't be able to get data from ECC, either.  FTP works similarly -- if you're using that and having trouble, please re-post.
    Best wishes,
    Jeff Prenevost
    Data Services Practice Manager
    itelligence

  • What additional resources are required to do the TestStand training courses I and II?

    I have the TestStand course manuals for courses I and II and am currently trying to refresh what I learned a couple of months ago when I took the courses.  I'm at the point where almost every VI required comes up broken because additional libraries are required in LabVIEW.  Why aren't the additional required libraries listed in the course documentation?  What are the additional libraries and how do I get them?

    Hi there!
    If I had to guess I would say that you're missing the TS support API libraries for LabVIEW... Since those are the only 'special' libraries used by any of the examples in the TestStand 3.x or 4.x training manuals.
    I'm going to assume that you have some recent version of LabVIEW (8.x?) and some recent version of TestStand (3.x) installed? Unless you took the NI training course more than a few years ago, in which case you might need earlier version of TS, LabVIEW version really shouldn't matter. Evaluation copies ought to be sufficient so I wouldn't blame those... 
    (If you don't have LabVIEW at all. Make sure you have the correct LabVIEW Run Time Engine version, as that's a pretty common source of TS errors... But without LabVIEW half of the exercises in the training manual are moot anyway...)
    In your LabVIEW install path, (C:\ program files etc...\LabVIEW 8.x\)  look for the folder path "vi.lib\addons\TestStand\", it ought to be full of a few *.llb files that TS would furnish to LabVIEW when the product is installed.  Sometimes when you install things in an unexpected order, or if you have multiple LVs installed, these items don't get put where you expect.
    If the folder is empty, copy what you need from... the TestStand install path (C:\ program files etc...\TestStand x.x\) folder "AdapterSupport\LabVIEW" and restart LV. This might get you up and running.
    If the folder is not empty. Try running a MassCompile from your LabVIEW Tools ->Advanced menu, there might be a version incompatibility issue...
    Feel free to send me an email if you're still stuck. But there aren't any external dependencies/hardware drivers needed for the TS training sequences...
    Cheers!
    --Elaine R.
    www.bloomy.com
    Cheers,
    Elaine R.
    www.bloomy.com

  • Saprouter service on windows -  which user rights are required?

    Hi,
    We have the saprouter service running in a windows 2003 server, this service is started by a user account named 'saprouter' which has its password set to never expires.
    Due to security concerns, our IT Security Deparment have ask us to apply all the following restrictions to the 'saprouter' user:
       1) 'Logon locally' user right is disabled
       2) Userid is not a member of the Administrators group
       3) Deny access to the user rights: 'Access this computer from network' and      'Logon through Terminal Services'
    As per our security policy, non-expiring passwords are allowed only for users that can meet all the conditions listed above.
    The questions are ¿Which user rights should be granted to the user account that starts the saprouter service? ¿Could we apply the conditions listed above without impact the saprouter service?
    Thank you for your kind attention.
    Sokram

    following permissions are required to set SAPRouter working :
    1. password never expires
    2. user never change the password
    3. should be member of administrator
    4. profile --> home folder :c:\user\sap\saprouter (path of instllables)
    5. end disconnected session : never , active session limit : never , idle session limit : never
    check if you can apply above points for your users
    Regards,

  • Question: What Lenovo drivers are required to make Win 7 work on a T400s?

    I'm looking to upgrade my T400s to Win 7 RTM, and I want to check which Lenovo drivers / apps are required. Based on this forum plus the Lenovo Win 7 Beta site (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=WIN7-BETA), I think I need:
    System Interface Driver 
    Hotkey Features
    Power Manager
    Either UltraNav Driver or UltraNav Driver 2  -- how do I tell which one of these I need?
    UltraNav Utility
    Lenovo Fingerprint Software UPEK
    ThinkVantage Active Protection System
    ThinkVantage Access Connections  -- Optional
    WLAN Intel Echo Peak ??
    Questions:
    Did I miss anything or do I not need any of the above?
    Any problems running Win 7 64 bit?
    Is the above order correct? I thought I saw a thread showing the install order a while back, but I cannot find it now.
    Any problem using the Lenovo System Toolbox for Vista?
    Thanks!
    RocketDude
    RocketDude
    T400s 2801-CTO

    here's what I installed on RC
    http://forums.lenovo.com/lnv/board/message?board.id=Beta_OS&message.id=1664

  • What rights are required to connect to WSUS server usig console

    Hi all,
    I have a WSUS server installed and it is joined to a domain. Another user from domain needs to connect to this WSUS server using a WSUS Management console. What rights does this user needs to be given on WSUS server so that he would be able to connect to
    server and be able to release patches?
    Regards, Darshan G. Parab

    What rights does this user needs to be given on WSUS server so that he would be able to connect to server and be able to release patches?
    The domain user should be added to the local WSUS Administrators group to be able to approve patches.
    I would suggest creating a Domain Security Group, adding the domain account to the Domain Security Group, and then adding the Domain Security Group to the WSUS Administrators local group on the WSUS server. However, while this is a more conformant way to
    configure the security, it also requires the user to logoff/logon (to get the domain group SID in the user's account token) and it requires the WSUS server to be restarted (to get the domain group SID in it's computer account token).
    You may determine that adding the domain user direct to the group is a necessary short-term implementation, and defer the use of groups until such time as the WSUS server can be restarted (which, given that yesterday was Patch Tuesday, will probably be in
    the next few days anyway).
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Does anybody know what customer rights are re a broken hifi ?

    My ipod hifi broke within a month of using it. It was always temperemntal (freezing the ipod, cutting off, never worked with batteries, etc.) and finally ceased to show any power at all. (Plus the back fell off.) I was amazed that Apple's products could be so dodgy (I've had problems with itunes 7 and 7.1 and my 30 GB ipod as well).
    Anyway, i sent the hifi back to the retailer about 20 days ago. They sent it to the service provider in Thessalinica. Now the Thessalonica reps tell me it will be at least a month as the hifi has been sent to the States.
    I'm leaving (emigating) to South Africa in 2 weeks' time, which means I will never see that hifi again. However, I can't belive that I do not have the right to some kind of refund or replacement. Has anyone had a similar experience? I'd really appreciate any advice about my rights vis a vis the retailer and Apple services.
    Thanks in advance to anyone who replies.
    m

    Instead of taking it back to the place of purchase, you should have called Apple Care for repair. You need to go back to the retailer and tell them your situation. There is no excuse for not getting it back before you leave. You could also demand the work order number and location it was sent, and call directly to that service provider.

  • Which rights are required for a user to create a new database instance

    Hi,
    Which user can create a database instance? Is it Admin or any user? or Is it must to have admin rights on the <oracle_home> folder in order to create a new database instance?
    Please let me know what rights the user should have for creating a new database instance.
    Regards,
    venkat

    If I login to machine as a Guest user or I am not a owner of Oracle software then in the both cases I couldn't able to create a new database instance. Am I right?
    Please suggest me.
    Regards,
    Venkat

  • What file(s) are required to launch WebHelp?

    I'm using RoboHelp 8 HTML, and generating WebHelp for an application that is supported on Firefox (Windows/Mac) and IE (latest versions of both).
    What WebHelp output file is used to launch the help? i.e., if I press F1 or click the Help button, what file is invoked? I believe it is simply the project_name.htm, where "project_name" is the name of the project. Currently troubleshooting why help isn't being invoked. Thanks for any help,
    Len

    Hi there
    Indeed you are correct in thinking that you would see a file named the same as your project and bearing an HTM file extension. This is also known as the "WebHelp Start Page" and is the first field listed in the dialogs when you examine WebHelp properties.
    Many confuse this file with the first topic that is presented. (The Default Topic). The WebHelp start page has a different function. It sets a cascade of events in motion. The last event executed is to load the default topic into the browser.
    Additionally, don't think that you can get away with delivering this single HTML file for your WebHelp. Some folks misunderstand that point as well. When you look inside the !SSL!\WebHelp folder you will see many files and folders. ALL of them need to be shipped or uploaded to the web server in order to make things work.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

Maybe you are looking for