Sd connector won't work after upgrading to ios8.1

after upgrading to iOS 8.1 my official lightening SD connector won't work, when I plug it in it says " cannot use device sub storage: the connected device is not supported"'is anyone else having this problem if so how to fix it, my sd connector worked fine when I was on ios7.

Same here, I have an iPhone 5s and it is really frustrating, all news app, twitter, whatsapp have stopped to Push any notification unless my device is awake !! only emails are fine - once I awake the iPhone, dozens of notifications pops up which make it really hard and annoying to read and follow !!!!
Please advise!!
Noting that i have tried to reset settings, backup and restore, install all updates....etc nothing worked !!

Similar Messages

ICloud email won't work after upgrade

iCloud email won't work after upgrade to Mountain Lion. Says pop 3 server is timing out. Solutions?

I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
My problem is TWO FOLD.
The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

Why does my cable selfie stick stop working after upgrading to iOS8.2?!

I have an iPhone 6. My cable selfie stick stopped working after upgrading to iOS8.2.
My friend's iPhone 6 is still iOS8.1, and the seflie stick works fine for him!
How do I solve this?

Are you using the paintbrush and have a gradient assigned to a stroke in CS6?
Double click on paintbrush, and enable keep selected.
If not give us a better explanation of what tool & settings you are using. (eg: blob brush, shape builder)

Mail won't work after upgrade to 3.0

I cannot get my Mail program to work after upgrading to 3.0. It starts, searched for new mail, then quits. I cannot get or send new mail. The program does not operate. Suggestions, please?

I get the exact same thing. The status just keeps showing "Connecting..." and it never seems to connect. Oddly enough, I just updated to the new OS on my iMac at home and immediately after, I couldn't connect to mail from the computer. I had to manually download a component of the update and once I did that, mail worked just fine. Probably just an odd coincidence having nothing to do with the mail issues on the iPhone but I thought I'd mention it.

Itunes won't work after upgrading to Mac os x 10.7

How can i fix itunes, it won't open after upgrading to Mac OX lion??

Downloaded and reinstalled. Still crashed instantly after trying to open or create a document. Below, from Crash Report:
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000044
Crashed Thread: 7
Thread 7 crashed with X86 Thread State (32-bit):
eax: 0xb0427d48 ebx: 0xb0427c38 ecx: 0xb0427b38 edx: 0xb0427b3c
edi: 0x00000009 esi: 0x00000000 ebp: 0xb0427b18 esp: 0xb0427ae0
ss: 0x0000001f efl: 0x00010283 eip: 0x94bc9f4b cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x00000044
Will attempt your suggestion.

HT204350 scanner won't work after upgrade

scanner won't work after upgrade

Hey srohall,
Thanks for the question. I understand that you are experiencing issues with your scanner after updating to OS X Mavericks. To troubleshoot this issue, we’ll want to follow the same troubleshooting steps for printers:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

SAP Connector no longer working after upgrade

After upgrading from EP 6.0 SP2 Patch 2 to Patch 3, our iViews using the SAP connector framework is no longer working. No connection is obtained. Even the examples in the PDK has stopped working. It seems that maybe some files have disappeared (in folder ".../server/services/eisconnector/work").
Any ideas?
Hilde

Hi Hilde,
1. please have a look in the Visual Admin Tool -> Services -> EISConnector ans see if the SAP Connector is deployed there. if you see it there, so it is deployed.
2. try to remove and add agian the SAP Connector (in the same place as from section one)
3. why dont you use the last Portal Patch and J2EE patch?
4. do you see any special exception in the Log file?
Regards,
Aviad

My itunes store, app center, safari and mail won't work after upgrade

I am very dissapointed in the new maverick upgrade. My app center, itune store, safari, and me mail won't work with the new upgrade. I called the help desk and they had me uninstall and re install the upgrade. he said i should have everything backed up cuz I will lose everything, but nothing was lost. It worked for a day, but now it doesn't work at all. it just gives me the hourglass circle symbol and finally times out. A couple of times my computer gave me an error code that i wasn't connected to the internet, even though I could use chrome no problem. Another error code I got was that I wasn't signed in, but I am. Any suggestions?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

HP C7280 Solution Center won't work after upgrading to Windows 7

I was running Vista and connected to the C7280 both wired and wireless. Last month or so has been wireless with no issues.
I upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says "An unsupported operation was attempted" that pops up twice, then I get an error that says "An invalid argument was encountered".
Then a pop up window gives some steps to try to fix the problem.
I downloaded and installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which didn't work.
I then removed the printer from hardware, and uninstalled the Solution Center software,
Re-installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 driver package and
installed dot4patch_reboot.exe,
shut the printer down, unplugged it for a few minutes, rebooted the computer, and
the same errors occur.
The driver is a year old, and I can't find a newer version.
Released:
2009-10-20
Version:
13.1.0
The patch is a few months newer but it didnt help either.
» HP Print Software Patch When Upgrading Vista to Windows 7
2009-12-06 , Version:1.0, 1.22M
This Windows 7 patch fixes some printer functionality after upgrading Vista to Windows 7. For networked printers, please go to www.hp.com for more support information.
Any help is appreciated.
This question was solved.
View Solution.

Finally got this problem fixed. No Thanks to HP Support
I installed the software for an HP Photosmart Premium C410 series and it corrected whatever problems I had with the HP Solution Center scanning problems in the C7280 printer software.
Go Figure ......

G4 AGP Graphics - 2nd display won't work after upgrading from os 10.2

I have a desktop G4 AGP Graphics with two displays. When I was running os 9-10.2, the second display worked fine, but after upgrading the os (now running 10.4), the second display still works, but has turned gray and pixelated.
When I take a screen shot, the picture shows that both displays appear clear (and in color).
Am I missing something? Thanks in advance for any suggestions

so do you have 2 different video cards driving two different monitors? or is it One video card with 2 displays?
the info you listed isnt very detailed but it does tell me you got an ATI video card with 16MB VRAM.
I assume that thats the Stock AGP 2x graphics card that came the The PowerMac G4 AGP graphics model.
why is your display set to 8bit depth? a stock 2x AGP card with 16MB VRAM should be able to support 16bit or 24bit depth even at 1024 x 768 res.
the info says also Core image not support as well as Quartz Extreme no supported. Which is significant because it could be why the 2nd Monitor doesnt display properly with Tiger.
under 10.2 there were less stringent requirements for driving video.
OSX 10.4 Tiger is much more advanced OS and has higher graphics cards requirements now.
I could be wrong, but I think you may need a newer video card that supports Quartz Extreme and Core image.
hopefully someone else will run by this topic and offer some insight aside from my own.

Epson stylus cx 3800 won't work after upgrade to osx 10.9

I installed OS X 10.9 on my MacBook Pro and now my printer Epson Stylus CX 3800 won't work. I uninstalled the printer and tried to reinstall with original epson software but computer won't download it. Perfectly good printer worked yesterday but not today. Any suggestions would be appreciated.

Hi ,
I had the same problem , But i fixed the issue by updating patch . Hope this link can help you for all version
as this has patches and explained
http://news.idg.no/cw/art.cfm?id=297D2650-EC09-00A1-048BD74750266743

ICloud does not work after upgrade to iOS8

I updated my iPad air and my iPhone 5s to iOS8 and since then I cannot access any iCloud service from my iPhone, I cannot even sign out of icloud and I always get the Incorrect password message and a ´There was an error connecting to iCloud.' Error (verification failed). I have tried all possible options without any result and I have no backup, no sharing of information/contatcs for the last few weeks....
Can anybody help because this is making my device pretty much unusable....

I have solved the issue by myself, but I don't know exactly what changed. I found instructions on the web about a similar issue after upgrading to iOS7. I could not sign out of Find my iPhone (a mandatory precondition) and after trying several times and signing out of everything possible (iMessage and Facetime as well), after rebooting (twice !) I got a message on the iPad asking if I wanted to link my iPhone to my account, and then suddenly it started working correctly again on the iPhone. I will probably never know the reason, but the problem is now solved.

Hdmi adapter not working after upgrade to iOS8

I Had used an hdmi adapter to comment my iPad2 to my TV with great ease. After upgrading to IOS 8 I plugged it in as ususal, the screen popped up on the TV for a moment then the TV went blank and I got an error on the pad that said this device was not supported. HELP!!!!

I have iPad 2 it just happen to me right after I updated to IOS 8 but it has happen to me before in IOS 7. I have Sony TV to fix it I would shut the TV off unplug then plug the HDMI adapter back into the IPad then turn on the tv. It still has back screen then I would touch the screen for input then the picture is on . Sometimes I would have to do this couple times . I would go months without any problems then the message would show up then I would have to do the something over again. Do not know if it's the Sony TV or the IPad not communicating with each other. The HDMI adapter I have is from Apple.

Remote LAN Name Resolution on VPN not working after upgrading to iOS8

Has anyone come across the problem since upgrading to iOS8 where remote LAN name resolution does not work when connected to the remote LAN with VPN. Everything worked fine on iOS7 and continues to work okay on devices that have not been upgraded.
If I'm connected with WiFi on the local network, I am able to resolve the FQDN to a local IP address. The problem arises when I'm away from the office, on either LTE or another WiFi and I start a VPN connection to the office. The VPN connects without any problems. If I try to connect to a desktop with the FQDN it never connects. I will work if I connect with the IP address. If I try to do an nslookup of the FQDN, I don't get a response. I am however able to get a response when performing an nslookup for google.com.
The VPN we are using is PPTP to a Windows network.

Has anyone come across the problem since upgrading to iOS8 where remote LAN name resolution does not work when connected to the remote LAN with VPN. Everything worked fine on iOS7 and continues to work okay on devices that have not been upgraded.
If I'm connected with WiFi on the local network, I am able to resolve the FQDN to a local IP address. The problem arises when I'm away from the office, on either LTE or another WiFi and I start a VPN connection to the office. The VPN connects without any problems. If I try to connect to a desktop with the FQDN it never connects. I will work if I connect with the IP address. If I try to do an nslookup of the FQDN, I don't get a response. I am however able to get a response when performing an nslookup for google.com.
The VPN we are using is PPTP to a Windows network.

Itunes won't work after upgrade

ok, i'm an idiot and upgraded to itunes 6.0. before today everything was working great, then after the upgrade itunes won't open anymore. any help would be great!!!

I am having the same problem - if anyone knows what the problem is I would appreciate it.

Sd connector won't work after upgrading to ios8.1

Similar Messages

Maybe you are looking for