Search of Personal Onlive Archive Not Working in Outlook or OWA

Whenever I try to search messages content contained in the archive mailbox from Outlook 2010 or OWA 2010, there are zero matches found even when I search for a keyword that I can see in the subject of a message in the archive.
Searching for messages works fine when searching the primary mailbox, but not the Personal Archive Mailbox.
We just enabled Archive mailboxes last week, so this the first time I tried searching and it may have never worked.
What would prevent searching of archive mailboxes from returning any results even when you are sure your are searching for text that is contained in messages in the archive mailbox?

Its not that its not available in Sp2, its that there are some improvements that I saw once Sp3 was installed.
You could always open a case with Microsoft support, though I suspect they would suggest upgrading to Sp3 first.
Note that SP2 is no longer supported after 4/8/2014
I assume that you have rebuilt the search indexes and gone through the usual troubleshooting already.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
I have not done anything yet. How can archive search indexes be rebuilt?
It would the index of the database itself. If you haven't done this already, you can stop the indexing service, delete the index files themselves on disk ( same dir as the database itself) then restart the index service to rebuild the index and
recrawl.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
I found a blog with more detailed instructions on how to delete the catalog. So, I deleted it and, an hour or so later, the search of the archive mailbox works in OWA. It is a small database with only a few test pilot users. I assume rebuilding
the index will take longer when we deploy it to everyone.

Similar Messages

Archive not working in outlook 2013

I am trying to setup an auto archive for a user. I have gone through the process of creating the .pst to use and is stored in his network drive. I have configured the autoarchive settings to archive anything older that 01/08/2010 and also ticked the archive
items marked as do not archive. everything looks correct and when I run the archive I can see it quickly goes through all the folders and it creates the subfolders within the archive but no emails are actually archived. There are over 86000 emails in his inbox
and they date back as afar as 2005 so there is 5 years worth of emails that should get moved according to auto archive settings.

Hi,
Network Drive .pst is not suggested for Outlook since this may cause some possible issues. some reference can be found below:
Network Stored PST files ... don't do it!
http://blogs.technet.com/b/askperf/archive/2007/01/21/network-stored-pst-files-don-t-do-it.aspx
Limits to using personal folders (.pst) files over LAN and WAN links
http://support.microsoft.com/kb/297019/en-us
Please configure a new archive with the .pst file on local, then check the result.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Can't search contacts + Google synch does not work

(1) The search field in contacts does not work. I have to go the phone app, find the person in there, then open up the contact from the phone app.(2) I have synched Google contacts with the phone's contacts. Updates to the phone's contacts transfer across sometimes immediately, but sometimes the phone goes for one month without synching. No manual sync is possible. Basically every time I want to sync a single contact for sure onto Google and onto other devices I have delete the account and reload it. Are there solutions to either of these problems?

Refunds from the App Store or iTunes Store

Imessage, facetime n personal hotspot is not working on my iphone 4

my imessage, facetime n personal hotspot is not working in my iphone4 thou my system is updated till ios 7.0.4

Depending on the country where you live, some features like FaceTime might not be available for your phone.
Others, like Hotspot, will have to be included into your data plan to be working. Contact your carrier about that.
iOS: Understanding Personal Hotspot
iOS: Troubleshooting Personal Hotspot
Learn how to troubleshoot iMessage activation.
Find information about linking your phone number to an Apple ID for use with FaceTime and iMessage.

Search to find country is not working

Search to find country is not working and I could not able to find the country, India and the subscription rates to subscribe. pls suggest me the solution

Hi, Harigermany, and welcome to the Community,
If you are referring to call rates related to the country of India, please see this FAQ article: https://support.skype.com/en/faq/FA34487/why-can-i-no-longer-make-calls-to-india-from-india?
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

TA48312 now my iphone4 version is 6.0.1, personal hotspot does not works well as before, so i want to upgrade back to the old version 4.3.5,please help me

now my iphone4 version is 6.0.1, personal hotspot does not works well as before, so i want to upgrade back to the old version 4.3.5,please help me.

Downgrading is Not supported by Apple.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

Mixed case name search in Unload Wizard is not working (EA3 - 3rd beta)

I believe the mixed case name search in Unload Wizard is not working (EA3 - 3rd beta)
I have bunch of triggers (and other db objects as well) with mixed case names such as zMY_TRIGGERu and can not find those triggers in the "Lookup" during the Unload Wizard (Tools menu --> Database Unload option).
I also found out that the search is limited to 500 objects and if you have more than 500 constraints for example only 500 of them are displayed by the "Lookup"
- is there any configuration/setting parameter (which I already checked the Preferences for DDL/Unload option and didn't see anything) for eliminating the 500 limit ? is it hard coded ?
- any trick to do the mixed case search in the Unload Wizard ? (I tried using "z"%"u" but that did not help - I used "z"% and also "z" and checked the % check box, ...)
Edited by: zaferaktan on Jan 25, 2011 5:06 PM

Thank you Joyce
I have already tried to apply a filter at the object navigator. It works with Triggers, tables, etc but NOT with the packages.
You can not unload both the package and the package body for "multiple" packages (you can use save package and package body option for a single package) from the Navigator.
Unfortunately, currently the only way in SqlDeveloper (3-EA3) to unload the package and the package body of multiple packages is to use the "Database Unload" menu option.
Therefore, for unloading more than one package/package body - the filter option you suggested won't work (and is not working).
I hope this will be fixed soon before version 3 released officially.
R/ Zaf

HT3574 The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

Check with your carrier or telephone service provider. Not all carriers provide this service.

Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting

Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting the phone as a new phone but nothing works. When connected to the pc it shows on the iphone screen '1 connection' but the pc says 'no internet connection' I've spoken to three who say it must be a phone fault. Any help appreciated. :-)

If you have restored as new that pretty well covers software issues
Looks like a trip to an Apple Store and a likely Out of Warranty exchange unit £159 over the counter
May e consider an upgrade with the money ?

Personal hotspot is not working despite several attempts

personal hotspot is not working despite several attempts

From the iPhone User Manual:
Personal Hotspot
You can use Personal Hotspot (iPhone 4 or later) to share an Internet connection with a computer or other device—such as an iPod touch, iPad, or other iPhone—connected to your iPhone via Wi-Fi. You can also use Personal Hotspot to share an Internet connection with a computer connected to iPhone via Bluetooth or USB. Personal Hotspot works only if iPhone is connected to the Internet over the cellular data network.
Note: This feature may not be available in all areas. Additional fees may apply. Contact your carrier for more information.
Share an Internet connection: Go to Settings > General > Cellular and tap Set Up Personal Hotspot—if it appears—to set up the service with your carrier.
After you turn on Personal Hotspot, other devices can connect in the following ways:
W-Fi: On the device, choose your iPhone from the list of available Wi-Fi networks.
USB: Connect your iPhone to your computer using the cable that came with it. In your computer’s Network preferences, choose iPhone and configure the network settings.
Bluetooth: On iPhone, go to Settings > Bluetooth and turn on Bluetooth. To pair and connect iPhone with your device, refer to the documentation that came with your computer.

Office 2013 Auto Archiving not working

Dear Sir / Madam,
We are using MS OFFICE 2013 with Windows 8.
Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
We have defined all the steps required to do Auto Archiving.
Your help is required in this since we have tried all the options.
Paloli Manoj

Hi,
What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
For more troubleshooting steps, please refer to this:
http://www.howto-outlook.com/faq/archivenotworking.htm
Regards,
Steve Fan
TechNet Community Support

In outlook 2013 Add-In, Adding dynamic menu to splitButton idMso="DialMenu" is working and the same code is not working in outlook 2010 Add-In.

In outlook 2013 Add-In, Adding dynamic menu to <splitButton idMso="DialMenu"> is working and the same code is not working in outlook
2010 Add-In. please let me know, if i am missing something. Below is the xml and screen shot
<contextMenu idMso="ContextMenuFlaggedContactItem">
<splitButton idMso="DialMenu">
<menu>
<dynamicMenu id="CallContactwithFreedomvoice
" label="CallContactwithFreedomvoice"
getContent="OnGetContenttest" insertAfterMso="Call"/>
</menu> </splitButton> </contextMenu>

Hi Narasimha prasad2,
Based on the description, the context menu for the flagged contact doen't work in Outlook. I am tring to rerpoduce this issue however failed.
I suggest that you check the state of the add-in first to see wether the add-in was loaded successfully.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Infopath form people picker not working in outlook 2010

Hi,
I have created custom task form which has reassign feature. If the form is opened in IE, people editor control is working but in outlook account names are not resolved and dictionary also not working. There should be some work around as OOTB approval
task form could able to do it.
So, Question is, why people picker is not working in Outlook? and how to make it work? If I store user profile in InfoPath form, people editor in outlook is working. but how to make a dynamic soap connection ?
Thanks.

Don't mark your own post as an answer when you obviously didn't understand the question...
Dharnima mentioned it is working in IE but not working in Outlook, so it's obviously not because the
"Requested By" field is in read only otherwise it wouldn't work in IE either.
Like Navid.R mentionned, the problem is indeed when going through the "Reassign Task" button, but coming from Outlook.
I have the same problem where the people picker validator and the people directory button doesn't work, only when coming from Outlook. I do click on Reassign Task, but I am unable to valide or open the people directory with both people picker buttons, simply
nothing happens.
I tried adding a native SharePoint Approval workflow to my list, and this one works fine. I can click the "Open Task" button in Outlook, click "Reassign Task" and then the people picker works perfectly fine.
However my custom workflow (that has default forms) does not work when prompted from Outlook.
I even tried to delete both forms and republish my workflow, so SharePoint can regenerate the forms by itself, it did generate new forms, but no luck either.

WebHelp search generated by RoboHelp 8 not working in Safari 5.0

Hello,
I'm new to the forum, but have been lurking for a while, and have benefitted greatly from answers found here. Thanks!
I use RoboHelp 8 HTML - recently upgraded from X5 - to generate WebHelp for a cross-browser compatible web app. I generate using the DHTML > Pure HTML option, and Safari is using the DHTML version. I use 'traditional style (no skin),' 'Optimize speed for: Local PC or Intranet'.
The Help seems to work fine in Safari for Windows, but now with the recent update to Safari 5.0, the Search functionality is not working at all. The search tab displays properly, but upon entering text and pressing Enter, nothing happens. It works in all other major browsers, except Opera which gets the Pure HTML version, and there I hid the search tab all together because it's unacceptable in that state.
The only customization I've done is swap out the tab images, and insert a little css to hide (display:none;) the "limit search results to __" option as it was getting cut off in every browser, and I couldn't figure out why, or how to fix it.
Any ideas? Anyone else seeing this?
Thanks for your anticipated help!

Hi there
Your mention of:
I still think this deserves attention, and would like to hear what others think.
Seems to imply you feel I was attempting to make you shrug it off. I wasn't. I was attempting to coax you (and anyone else) to submit the Bug Report. You have no idea how critical this aspect is. I see you made no mention of doing that so I'm assuming you ignored the suggestion.
Many folks have the grossly mistaken belief that the Bug Report/Wish Form just sends information to a circular file where it is never acted upon or seen again and as a result, you have had your say and it makes you feel better for getting it off your chest. But these things are actually reviewed by the development team. Each and every one of them. You may not get a personal response for each one you submit, but sometimes you do!
As for changing the verbiage, click File > Project Settings > General and look at the LNG File tab of the ensuing dialog. You are able to influence all manner of verbiage in that little gem.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Gmail Archive not working in iOS8

If I try to archive a Gmail message in the iOS8 Mail app, I get the error Unable to Move Message - The message could not be moved to the mailbox Archive.
The problem may lie in that I use Exchange for Gmail - I've had it like that for years, and it seems better than the new system.
Other people seem to have had the same problem for deleting in the previous iOS, but that's working fine for me.
Any thoughts would be greatly appreciated.

Hi,
Network Drive .pst is not suggested for Outlook since this may cause some possible issues. some reference can be found below:
Network Stored PST files ... don't do it!
http://blogs.technet.com/b/askperf/archive/2007/01/21/network-stored-pst-files-don-t-do-it.aspx
Limits to using personal folders (.pst) files over LAN and WAN links
http://support.microsoft.com/kb/297019/en-us
Please configure a new archive with the .pst file on local, then check the result.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Search of Personal Onlive Archive Not Working in Outlook or OWA

Similar Messages

Maybe you are looking for