Searching an embedded PDF using the OCX control

Does anyone have any thoughts on being able to search a PDF that is opened in a VB form using the OCX control that is provided with Adobe Acrobat? Is the ExecCommand usable for this? I'm simply trying to find the first instance of a search string in the document. In the below snippet, I open the file; how do I find the string searchString?
Thanks in advance.
Dim FILENAME As String
Dim searchString as string
FILENAME = "C:\Users\jwollman\Documents\Research\Reform\full document.pdf"
PDFViewer.LoadFile FILENAME

Hi,
If you open with the reader, the menu bar of Internet explorer will change. If you open inside the activeX, the menu bar will not change. If this is the case, I think is possible your configuration will not work because the activeX is not exactally the reader. For instance, if you navigate to a xdp/xfdf with Reader, you will be able to open the target PDF. However, if you make that with ActiveX you will not.
regards

Similar Messages

I can't get the iCloud Contacts and Calendar folders to appear in Outlook 2010 using the iCloud Control Panel.

I can't get the iCloud Contacts and Calendar folders to appear in Outlook 2010 using the iCloud Control Panel. Also the datafile share which ends in .aplzod is not created in Outlook. The Contacts and Calendar are sent to iCloud (verified on iCloud.com) but the iCloud folders are not created in Outlook in the Contacts and Calendar navigation panes.   I get a message toward the end of the sync process indicating that there was an unspecified error. I'm using the newest version of the iCloud Control Panel, the 32 bit version of Outlook 2010, Windows 7 64 bit, an iPhone 3GS, and the latest version of iTunes. Any ideas how to complete the sync process to the end?

Pretty much the same for me: Windows 7 64-bit, Outlook 2010, iCloud Control Panel 1.0.1, iPhone 3GS. Error report at end of setup process is shown below, and has been emailed. Any help please?
Your setup couldn't be started because of an unexpected error.
Error: 0x8004010F: ZebraBootstrap::ActivateDataFile: Could not create msgservice
AppleOutlookDAVConfig version: 3.0.42.0
Windows version (6.1.7601): Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit Local app data directory test: Pass Temp directory test: Pass Outlook version: 14 (14.0.6025.1000), x86 Outlook location (installed): C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE MAPI location: C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Contents of C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
<Not found>
Contents of C:\Windows\system32\mapisvc.inf
[Services]
MSFAX XP=Fax Mail Transport
[Default Services]
MSFAX XP=Fax Mail Transport
[MSFAX XPP]
PR_PROVIDER_DLL_NAME=FXSXP.DLL
PR_RESOURCE_TYPE=MAPI_TRANSPORT_PROVIDER
PR_RESOURCE_FLAGS=STATUS_NO_DEFAULT_STORE
PR_DISPLAY_NAME=Fax Mail Transport
PR_PROVIDER_DISPLAY=Fax Mail Transport
[MSFAX XP]
PR_DISPLAY_NAME=Fax Mail Transport
Providers=MSFAX XPP
PR_SERVICE_DLL_NAME=FXSXP.DLL
PR_SERVICE_SUPPORT_FILES=FXSXP.DLL
PR_SERVICE_ENTRY_NAME=ServiceEntry
PR_RESOURCE_FLAGS=SERVICE_SINGLE_COPY|SERVICE_NO_PRIMARY_IDENTITY
HKLM\Software\Microsoft\Office\14.0\Access\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\Access Connectivity Engine\ISAM Formats\Outlook 9.0 HKLM\Software\Microsoft\Office\14.0\OneNote\Outlook Add-in
Message Classes
HKLM\Software\Microsoft\Office\14.0\Outlook
Dataviz
InstallRoot
Namespaces
    {0006F017-0000-0000-C000-000000000046}
      FolderTypes
        {00067800-0000-0000-C000-000000000046}
        {00067801-0000-0000-C000-000000000046}
        {00067802-0000-0000-C000-000000000046}
        {00067803-0000-0000-C000-000000000046}
        {00067804-0000-0000-C000-000000000046}
        {00067808-0000-0000-C000-000000000046}
        {00067828-0000-0000-C000-000000000046}
        {00067829-0000-0000-C000-000000000046}
        {0006782A-0000-0000-C000-000000000046}
      ViewTypes
        {00062000-0000-0000-C000-000000000046}
        {00062001-0000-0000-C000-000000000046}
        {00062002-0000-0000-C000-000000000046}
        {00062003-0000-0000-C000-000000000046}
        {00062004-0000-0000-C000-000000000046}
    {0006F018-0000-0000-C000-000000000046}
      FolderTypes
        {00067820-0000-0000-C000-000000000046}
        {00067821-0000-0000-C000-000000000046}
        {00067822-0000-0000-C000-000000000046}
        {00067823-0000-0000-C000-000000000046}
      ViewTypes
        {00062000-0000-0000-C000-000000000046}
        {00062001-0000-0000-C000-000000000046}
        {00062002-0000-0000-C000-000000000046}
        {00062003-0000-0000-C000-000000000046}
        {00062004-0000-0000-C000-000000000046}
Operations
    1ImportFile
    2ExportFile
    3ExportDataLink
    4ImportVCard
    5ImportAccounts
    6ImportVcalendar
    7ImportRss
    8ExportRss
    9ImportCFL
    ImportEudora
SchedulingInformation
    FreeBusySupport
SearchTypes
    {00067A00-0000-0000-C000-000000000046}
    {00067A01-0000-0000-C000-000000000046}
    {00067A02-0000-0000-C000-000000000046}
    {00067A03-0000-0000-C000-000000000046}
    {00067A04-0000-0000-C000-000000000046}
    {00067A08-0000-0000-C000-000000000046}
    {00067A10-0000-0000-C000-000000000046}
    {00067A11-0000-0000-C000-000000000046}
    {00067A20-0000-0000-C000-000000000046}
Setup
UpgradePath
HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Office\Outlook
Addins
    AccessAddin.DC
HKLM\Software\Microsoft\Office\14.0\User Settings\Access_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
    Microsoft Access
HKLM\Software\Microsoft\Office\14.0\User Settings\Excel_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
    Microsoft Excel
HKLM\Software\Microsoft\Office\14.0\User Settings\Misc_SpsOutlookAddin\Create\Software\Microsoft\Office\Outlook
Addins
    ColleagueImport.ColleagueImportAddin
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover
Create
    Software
      Microsoft
        Office
          14.0
            Outlook
              AutoDiscover
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Core
Create
    Software
      Microsoft
        Internet Mail and News
          Mail
        MSDAIPP
        Shared Tools
          Outlook
            Journaling
              Conversation
              Document
              E-mail Message
              Fax
              Letter
              Meeting
              Meeting Cancellation
              Meeting Request
              Meeting Response
              Note
              Phone Call
              Remote Session
              Task
              Task Request
              Task Response
        Web Service Providers
          FreeBusy
            office.microsoft.com
        Windows
          CurrentVersion
            Internet Settings
              TemplatePolicies
                High
              Zones
                4
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg
Create
    Software
      Microsoft
        Windows
          Shell
            Associations
              UrlAssociations
                mapi
                  UserChoice
HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKLM\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
HKLM\Software\Microsoft\Office\14.0\User Settings\PowerPoint_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
    Microsoft PowerPoint
HKLM\Software\Microsoft\Office\14.0\User Settings\Word_Core\Create\Software\Microsoft\Shared Tools\Outlook
Journaling
    Microsoft Word
HKLM\Software\Microsoft\Office\8.0\Outlook
HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.msi
HKLM\Software\Microsoft\Office\Delivery\SourceEngine\Downloads\{90140000-001A-04 09-0000-0000000FF1CE}-C\Resources\OutlookMUI.xml
HKLM\Software\Microsoft\Office\Outlook
Addins
    Apple.DAV.Addin
    BCSAddin.Connect
    Groove.OutlookProxyAddIn
    Microsoft.VbaAddinForOutlook.1
    OneNote.OutlookAddin
    OscAddin.Connect
    OutlookChangeNotifier.Connect
    Search.OutlookToolbar
    UmOutlookAddin.FormRegionAddin
AutoConfigDomains
    hotmail.*
    live.be
    LIVE.CA
    LIVE.CL
    LIVE.CN
    LIVE.CO.IN
    LIVE.CO.KR
    LIVE.CO.UK
    LIVE.CO.ZA
    LIVE.COM
    LIVE.COM.AR
    LIVE.COM.AU
    LIVE.COM.MX
    LIVE.COM.MY
    LIVE.COM.PE
    LIVE.COM.PK
    LIVE.COM.PT
    LIVE.COM.SG
    LIVE.COM.VE
    LIVE.DE
    LIVE.DK
    LIVE.FR
    LIVE.HK
    LIVE.IE
    live.in
    LIVE.IT
    LIVE.JP
    LIVE.MA
    LIVE.NL
    LIVE.NO
    LIVE.PH
    LIVE.RU
    LIVE.SE
    livemail.com.br
    msn.*
    msnhotmail.com
    tw.live.com
    windowslive.com
FormRegions
    IPM.Note.Microsoft.Exchange.Fax.UM.CA
    IPM.Note.Microsoft.Exchange.Voice
    IPM.Note.Microsoft.Exchange.Voice.UM
    IPM.Note.Microsoft.Exchange.Voice.UM.CA
    IPM.Note.Microsoft.Fax.CA
    IPM.Note.Microsoft.Voicemail
    IPM.Note.Microsoft.Voicemail.UM
    IPM.Note.Microsoft.Voicemail.UM.CA
    IPM.Note.Rpmsg.Microsoft.Voicemail.UM
    IPM.Note.Rpmsg.Microsoft.Voicemail.UM.CA
Outlook 10 Accounts
    Categories
      {ED475418-B0D6-11D2-8C3B-00104B2A6676}
      {ED475419-B0D6-11D2-8C3B-00104B2A6676}
      {ED475420-B0D6-11D2-8C3B-00104B2A6676}
    Types
      {4DB5CBF0-3B77-4852-BC8E-BB81908861F3}
      {ED475411-B0D6-11D2-8C3B-00104B2A6676}
      {ED475412-B0D6-11D2-8C3B-00104B2A6676}
      {ED475414-B0D6-11D2-8C3B-00104B2A6676}
SocialConnector
    SocialProviders
      OscAddin.SharePointProvider
HKCU\Software\Microsoft\Office\14.0\Common\HelpViewer\Applications\OUTLOOK
AdditionalCollections
    0
    1033
HKCU\Software\Microsoft\Office\14.0\Common\Migration\Outlook
HKCU\Software\Microsoft\Office\14.0\Outlook
Addins
AutoDiscover
    RedirectServers
Display Types
    Balloons
Journal
Message
Office Explorer
Options
    Calendar
    MSHTML
      International
    ToDoBar
Perf
    RoamingStreamsCache
      6BF937902986EF42A5D2882B309351BF
Preferences
Resiliency
    DisabledItems
Search
    Catalog
Setup
SQM
Today
    Folders
UserInfo
HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_AutoDiscover HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Core HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_Intl HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SearshShellReg HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialConnector HKCU\Software\Microsoft\Office\14.0\User Settings\Outlook_SocialProviderMOSS
HKCU\Software\Microsoft\Office\8.0\Outlook
HKCU\Software\Microsoft\Office\Outlook
Addins
    AccessAddin.DC
    ColleagueImport.ColleagueImportAddin
    iTunesAddIn.CalendarHelper
OMI Account Manager
SocialConnector

How can I Use the iCloud Control Panel to pick a new folder

I apparently moved or deleted my iCloud folder and keep getting this message Use the iCloud Control Panel to pick a new folder. How do I do this?

I have/had the same problem, just started this morning. I tried a system restore to a known good date. I still had the problem so I rolled restored the system to the latest.
Thinking that it might have something to do with priviliges, I reviewed my user account and noticed it was set to "Administrator". On a whim, I switched my user account from administrator to "standard user" and I'll be... the issue dissapeared. I have no idea why. But I thought I'd pass it along.

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Why can I not Convert a Microsoft Office Document to a PDF using the Context Menu?

Why can I not Convert a Microsoft Office 2013 Document to a PDF using the options found in the Context Menu? (Ex: Convert to PDF, Combine Supported Files into PDF?)
I updated to Acrobat XI PRO recently, but now i'm unable to combine or convert microsoft word docs to PDF.
In Adobe Acrobat X I had this feature below, and it would combine Microsoft Office Documents all into a single PDF. Now I no longer have this issue in Adobe Acrobat XI Pro. It seems like it was program named Adobe Elements that was running the conversion.

Ajlan. That page is showing as not available. Would the fix apply to Adobe Acrobat X and XI?
Zach Moses
Direct Phone and Fax (615) 577-5814 | [email protected]
W Squared, Inc.
5500 Maryland Way | Suite 200 | Brentwood, TN 37027 | www.wsquared.com<http://www.wsquared.com>
This email and any attachments may be confidential and are solely for the use of the individual to whom they were intended. If you are not the intended recipient of this email, you must take no action based upon it, nor must you copy it or show it to anyone. Please immediately reply to the sender if you suspect you were not the intended recipient. All contents of this email are provided "as-is" without warranty of any kind and are subject to change without notice. W Squared assumes no risk from the recipient's use of this email. W Squared is not a certified tax firm or law firm and recipient should not rely on any communication from W Squared or its employees as having such authority.

I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

1. HP Pavilion dm4 XO132AV
2. Windows 7 64-bit
3. No error message
4. No changes were made prior to when the issue occured
5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

When using the new controls of CVI 7 in my DLL it crash on the DisplayPanel call

I have a CVI DLL that was build under CVI 6. When I recompile it in CVI 7 everything works fine when I load the DLL from my application. But If I add a button on my uir file with the new CVI 7 style (no event code associated, just a plain button) my DLL crash and hang my main application on the DisplayPanel call. If I don't use the new controls (use the classic-style controls) everything works fine. I use LoadPanelEx to load my uir file. The returned panel handle is good (> 0) But when I call DisplayPanel it doesn't show me any error but just crash my DLL and jump back in the DLLMain function saying that my process is detaching and hang my main application.
I am running on Win2k. I have
LabVIEW 7 and LabVIEW 6.0.2 installed also. The main application that calls the DLL is made in Delphi 6.
I have re-installed the run-time engine from the CDs but this didn't do the trick. Is there something else that I must include with my DLL to use thoses new controls styles. The DLL is running from the same place where it was build.

Hi,
I have created another cvi DLL and it create the same behavior in my application (crash on DisplayPanel). But if I do a standalone CVI executable with thoses new buttons everything is fine. Also I have created another application(in Delphi) to load the cvi-dll and it works fine in that one. So I would tend to say that it is in my application but on the other hand everything works fine if I don't put thoses LabStyle controls...Weird I know...
In shorts It is just crashing with a specific application but for any UI project that I create. If I don't put thoses buttons everything is ok...Any other advises would be helpful because I'm kind of out of ideas...
Gilles Hache

How do I print just one page of a .pdf using the android e-Print app?

How do I print just one page of a .pdf using the android e-Print app?

Hello,
I see that you're having an issue with printing just one page from the E-print app.
Unfortunately, on an android device, you do not have the feature to select how many pages you want to print
Thanks!

What is the best practice for using the Calendar control with the Dispatcher?

It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
Scott

Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html

How do u turn down the tick volume when using the remote control?

how do u stop the ticking(clicking) when adjusting the volume using the remote control?

Hi philippalldino,
I understand that you do not wish to hear your volume feedback when adjusting the volume of your computer. Here is an article that will tell you how to disable this feature:
OS X Mountain Lion: Turn off the alert sound for volume keys
http://support.apple.com/kb/PH10762
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Is it possible to use the message control in R/3 to trigger a Proxy?

Is it possible to use the message control in R/3 to trigger a Proxy? The message control mechanism has some advantages that I want to use E.g. repeat messages with RSNAST00, configuration instead of coding etc.. Does anyone uses SD Invoice message control mechanisms together with XI Proxies?
Best regards,
Matthias

Hi,
>>>configuration instead of coding etc
currenly it is not possible to achive it without any coding
>>>repeat messages with RSNAST00
RSNAST00 is not used to repeat messages (idocs) but to send them
try using standard IDOC in your sd invoice scenario
if you don't want to do any coding
Regards,
michal

Using the remote control.

I noticed that the Apple knowledge based article describing the functions of the remote hasn't been updated to reflect the v 3 Apple tv software. I suspect there are a few users who don't get to use all the features of the Apple tv because they aren't necessarily aware of all the things the remote will do.
In an effort to try to ensure that users get the best out of their Apple TV's I have now produced my own list of functions that are accessible using the remote control. In doing this I realised it involved a little more work than I'd envisaged since the remote performs many functions which can vary depending on which type of content you are using.
I'd be grateful if those of you that are familiar with the Apple tv would take a critical look at what I have done and provide me with feedback on any inaccuracies, omissions or improvements that could be made in relation to the information I have provided.
Using the Apple TV remote control
Message was edited by: Winston Churchill: Having seen the site for the first time I realise I need to do some work on the formatting-I'll put this right in due course, just looking for comments on content for now.

Alley_Cat wrote:
1 - Looks exhaustive!
It was actually, I didn't think I'd need to do quite so much checking that things did what it says.
2 - Having result on the left initially confused me, I think I'd find Action>Result better than Result < Action.</div>
I see the point, but it could possibly be resolved by renaming 'result' as aim, goal or something similar rather than reversing the body text itself. I was trying to emulate the way Apple themselves did this on their KB (Reason I did this - their KB is out of date)
3 - Probably a bit too much information on one page.
Perhaps split into a tabbed layout
Remote | Basic Controls | Music | TV Shows | Films/Movies etc.
Noted, I'm still not happy with the formatting, it needs work, it might not work too well in some browsers, a tabbed page is a little more than my iweb capabilities at present (or at least the way I would want it to work - tabs within a page rather than tabs to change pages)
Jolly Giant wrote:
maybe a slightly larger font ...
Mmmm, not sure about that, I'm always concerned my text is already too large (necessity of white on black), might it not simply make an already long page a bit longer.

How to use the remote control in MediaSource Audio Play

Hello,
I bought myself the Creative X-Fi Elite Pro.
I found out that I only can use the remote control in Media Center of the software.
Now I want to use it in the Creative Audio Player whicht was also in the Box.
Is there a way?

Yes there is. I suggest trolling these boards for the 3rd party remote solutions that will free you to use the remote in ANY application like Winamp, Notepad, Windows Media Player, etc.
Just my two opinionated cents...

How to use the custom control ?

Hi Friends,
plz help to use of custom control in screen painter ?
and how to use the custom control ?
Thanking you.
Regards,
Subash.

HI,
Screen Elements
A screen can contain a wide variety of elements, either for displaying field contents, or for allowing the user to interact with the program (for example, filling out input fields or choosing pushbutton functions). You use the Screen Painter to arrange elements on the screen.
You can use the following elements:
·        Text fields
Display elements, which cannot be changed either by the user or by the ABAP program.
·        Input/output fields and templates
Used to display data from the ABAP program or for entering data on the screen. Linked to screen fields.
·        Dropdown list boxes
Special input/output fields that allow users to choose one entry from a fixed list of possible entries.
·        Checkbox elements
Special input/output fields that the user can either select (value X) or deselect (value SPACE). Checkbox elements can be linked with function codes.
·        Radio button elements
Special input/output fields that are combined into groups. Within a radio button group, only a single button can be selected at any one time. When the user selects one button, all of the others are automatically deselected. Radio button elements can be linked with function codes.
·        Pushbuttons
Elements on the screen that trigger the PAI event of the screen flow logic when chosen by the user. There is a function code attached to each pushbutton, which is passed to the ABAP program when it is chosen.
·        Frame
Pure display elements that group together elements on the screen, such as radio button groups.
·        Subscreens
Area on the screen in which you can place another screen.
·        Table controls
Tabular input/output fields.
·        Tabstrip controls
Areas on the screen in which you can switch between various pages.
·        Custom Controls
Areas on the screen in which you can display controls. Controls are software components of the presentation server.
·        Status icons
Display elements, indicating the status of the application program.
·        OK field
Every screen has a twenty-character OK_CODE field (also known as the function code field) that is not displayed directly on the screen. User actions that trigger the PAI event also place the corresponding function code into this field, from where it is passed to the ABAP program. You can also use the command field in the standard toolbar to enter the OK field. To be able to use the OK field, you need to assign a name to it.
All screen elements have a set of attributes, some of which are set automatically, others of which have to be specified in the Screen Painter. They determine things such as the layout of the screen elements on the screen. You can set the attributes of screen elements in the Screen Painter - either for a single element, or using the element list, which lists all of the elements belonging to the current screen. Some of the attributes that you set statically in the Screen Painter can be overwritten dynamically in the ABAP program.
with regards,
sowjanyagosala

Using the Transport Controls of O2R96 for Logic Pro MMC

Hi guys! They have done a nice job on Logic Pro 7.1.0 with getting it to talk to the O2R96 every start up. It's a pleasure not to have to go into Control Surface Setup everytime... There are still a few issues that they haven't yet resolved with the Control Surface that used to work amazingly well on Logic 6.4.2...
Firstly, as I am really used to using the Transport Controls on the O2R96 for playback control when mixing a session down. As one's head never needs to leave the "sweet spot" you just edit till happy (never having to continually turn to the HDR, etc)... Well, on the O2R96 (I'm using version 2 of the O2R96s operating system), ever since I upgraded to Logic Pro 7.0.0, but the Transport Controls don't function at all... Not even the Suffle! They did when I was using Logic Pro 6.4.2. Has anyone else complained of this problem yet?
Also, have noticed that when mixing tracks down using the O2R96 as the main Control Surface, that the faders on screen miss out values between -0.5 and +1.2, so that the 0.0 Unity level cannot be drawn manually into the automation just using the Control Surface Faders. This is annoying, as this slight jump can cause a blip in the mix that stands out like a sore thumb and can take hours of editing to get rid of them... Again, have you had reports of anyone else finding this?
If you have any solutions, would be very obliged...

Got the transport controls working at last. Thanks Dave (from www.logicprohelp.com)! Faders still glitchy between -0.5 and +1.2. No unity level...
Tried adjusting "Control Surface" MIDI Bandwidth, and even adjusted "Controller Assignment" parameters by switching 'pan pots' on O2R96 and 'faders' on O2R96 to control 'volume faders' and 'pan contols', respectively, within Logic. Seems that this glitch still occurs while using the O2R96's pan pots to control volume fades within Logic.
Anyone at Apple that can help? Is it an error in the code you guy's have written?

Searching an embedded PDF using the OCX control

Similar Messages

Maybe you are looking for