Searching for best practices or step by step directions for setting up governance framework specific to Project server 2013

Hi! Could anyone lead me to the information i requested .
thanks
Aby

Hope this blog helps
http://blogs.technet.com/b/projectadministration/archive/2010/09/03/implementing-governance-in-sharepoint-2010-whitepaper.aspx
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
the thread.

Similar Messages

  • Steps to take in case of any emergency... Project Server 2013 backup and restore

    Hi There !
    We have a Project Server 2013 environment which is scheduled for daily backup on a recovery server. Just wanted to know what will be steps  that we should follow if we were to face a situation in which production is down and we have to look to recovery
    server.
    Your help is much appreciated !
    Thanks

    This will do the Project Sever 2013 rollover -
    https://pwmather.wordpress.com/2013/05/02/projectserver-2013-environment-migration-rollover-steps-powershell-ps2013-msproject-sp2013/
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS |
    MVP | Downloads

  • Looking for best practices when creating DNS reverse zones for DHCP

    Hello,
    We are migrating from ISC DHCP to Microsoft DHCP. We would like the DHCP server to automatically update DNS A and PTR records for computers when they get an IP. The question is, what is the best practice for creating the reverse look up zones in DNS? Here
    is an example:
    10.0.1.0/23
    This would give out IPs from 10.0.1.1-10.0.2.254. So with this in mind, do we then create the following reverse DNS zones?:
    1.0.10.in-addr.arpa AND 2.0.10.in-addr.arpa
    OR do we only create:
    0.10.in-addr.arpa And both 10.0.1 and 10.0.2 addresses will get stuffed into those zones.
    Or is there an even better way that I haven't thought about? Thanks in advance.

    Hi,
    Base on your description, creating two reverse DNS zones 1.0.10.in-addr.arpa and 2.0.10.in-addr.arpa, or creating one reverse DNS zone 0.10.in-addr.arpa, both methods are all right.
    Best Regards,
    Tina

  • Looking for best practice white paper on Internet Based Client Management

    Looking for best practice white paper on Internet Based Client Management for SCCM 2012 R2.
    Has anyone implemented this in a medium sized corporate environment? 10k+ workstations.  We have a single primary site, SQL server and 85 DP's. 

    How about the TechNet docs: http://technet.microsoft.com/en-us/library/gg712701.aspx#Support_Internet_Clients ?
    Or one of the many blog posts on the subject shown from a web search: http://www.bing.com/search?q=configuration+manager+2012+internet+based+client+management&go=Submit+Query&qs=bs&form=QBRE ?
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Looking for best practice on application scope beans

    Hey – a portal newbie here. I’ve got some application scope beans that need to be initialized on startup. First thought was to create a servlet that would set the bean. Then I saw the GlobalApp setting, but I think that looks like it is more session scope than application… Looking to be corrected here if I am wrong.
    Is there a place where these type of things traditionally happen? Read only, so no cluster worries (I think) Using WLP 8.1 SP4 and looking for best practices. Thanks for the help!

    To support "code sharing" you need an integrated source code control system. Several options are out there but CVS (https://www.cvshome.org/) is a nice choice, and it's completely free and it runs on Windows, Linux, and most UNIX variants.
    Your next decision is on IDE and application server. These are usually from a single "source". For instance, you can choose Oracle's JDeveloper and Deploy to Oracle Application Server; or go with free NetBeans IDE and Jakarta Tomcat; or IBM's WebSphere and their application server. Selection of IDE and AppServer will likely result in heated debates.

  • Looking for best practice on J2EE development environment

    Hi,
    We are starting to develope with J2EE. We are looking for best practice on J2EE development environment. Our concern is mainly on code sharing and deployment.
    Thanks, Charles

    To support "code sharing" you need an integrated source code control system. Several options are out there but CVS (https://www.cvshome.org/) is a nice choice, and it's completely free and it runs on Windows, Linux, and most UNIX variants.
    Your next decision is on IDE and application server. These are usually from a single "source". For instance, you can choose Oracle's JDeveloper and Deploy to Oracle Application Server; or go with free NetBeans IDE and Jakarta Tomcat; or IBM's WebSphere and their application server. Selection of IDE and AppServer will likely result in heated debates.

  • Looking for best practice / installation guide for grid agent for RAC

    I am looking for best practice / installation guide for grid agent for RAC, running on windows server.
    Thanks.

    Please refer :
    MOS note Id : [ID 378037.1] -- How To Install Oracle 10g Grid Agent On RAC
    http://repettas.wordpress.com/2007/10/21/how-to-install-oracle-10g-grid-agent-on-rac/
    Regards
    Rajesh

  • Custom Column for Project Code Number & Search Box to search Content in Project Server 2013

    Hi all,
    I want to add a custom column in Project Center view for showing some Numerical Projects codes like 4523, 5248,8956 like that... Each code will represent Project assigned with that code in Project Server 2013. Also let me now if i can add some search box
    in Project Center page through which i can search Project Code or Project Name. Currently, provided search bar not working in Project Server 2013.
    Need it urgent..Kindly help

    Hi,
    If you want to add this column in a project center view, be careful to choose a project view in the "manage views" views' list. Also it must be a project custom field and not a task field. As Paul said, we assume that the field with the code exists
    and has been previousky created by you.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, MCP |

  • Project Server 2013 for Resource Planning & Project Portfolio Management

    We are looking to  use project server 2013 for resource and project portfolio management.  We are an IT department of approximately 600 growing to 1,000 within the next several years.
    We would like to us PS2013 to do the following :
    Manage Portfolio of Projects
    Manage Resources against this Portfolio
    Calculate Project Finances using resource roles and rates
    I would be grateful to have both comments on experience , both positive and negative.
    Thank You

    Many teams within organizations are turning to Project Server to help them control resources, deliverables and costs better.    It does resource management very well with work & cost resources, baseline costs, material costs, budget costs and
    out of the box earned value analysis (EV).  The Strategy (portfolio) component is very powerful and it will help you identify project that align to your objects then do what if analysis to find the right mix of projects.
    Here are a couple of things you should think about when moving to PS2013:
    1) Who will be using the tool?  If it is a mix of onsite staff, remote staff, vendors, contractors etc. you may want to think about a hosted solution.
    2) Training.  Don't assume everyone will just magically 'know' how to use the tool.  Train everyone (team members, PMs, Executives) then train them again.  It's the only way to truly get the value out of the tool.
    3) Who will manage the system?  This is not a typical application.  The right administrator needs SharePoint, Project Server, SQL Server,  MS Project, Analysis Services and SQL Report writing skills.  Please note that much of this can
    be learned by the right person but DEFINITELY find the right person.
    4) Don't start customizing right out of the box.  You will get frustrated.  Adjust your organization to the tool early on.  I know that is easier said than done but you need a realistic approach to get tool acceptance moving early.  
    5) Use workflows but don't use them right out of the gate.  Workflows are great but I suggest you wait until phase 2 or 3 to start aligning them to your business processes.  
    6) Lastly and most importantly, you must first establish your own business processes THEN  align them to the tool.  DO NOT assume the tool will create business process for you.  You must think about how you are going to initiate a project,
    how are you going to track deliverables, how will time sheets be managed, etc.  Get to a whiteboard, crack open Visio and start building and establishing your processes now.  PS 2013 is pretty flexible and usually will align well with existing business
    processes.
    And don't forget to hire a good consultant.  They can be brought in during key phases of your roll-out to add value, help you avoid risks, and provide you with best practice advice.
    Good luck.

  • QueueSubmitTimesheet for other users with impersonation? Project Server 2013

    Hello.
    In an console application using TimeSheet.asmx on Project Server 2013 I want to call QueueSubmitTimesheet for timesheets that belong to other user.
    Is this possible?
    Thanks and best regards, Timo

    Just start with:
    http://www.apple.com/ipad/business/it/management.html

  • Project Plan/Schedule for Project Pro and Project Server 2013 Install

    Looking for a project plan/schedule for a dept. wide install of Project Pro and Project Server 2013. Anyone have one to share?

    In Project Professional 2013 there are two templates:
    Install Project Server 2013 and Upgrade to Project Server 2013.  You may search for either template.
    Here is a direct link:
    http://office.microsoft.com/en-us/templates/results.aspx?qu=project&av=zpj150&queryid=312801ca-a859-48dd-af56-714e81c97cf4#ai:TC103345703|

  • Send email is not working in share point desinger 2013 for project server 2013 workflow

    Hi,
      How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
     i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
    Thank you for helping us.
    Thank You
    Vinay

    Hi,
      How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
     i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
    Thank you for helping us.
    Thank You
    Vinay

  • Creating custom Category for Risk & Issue in Project Server 2013

    Dear All,
    How to Change Risk & Issue Category default as per business requirement when selecting them through drop down or radio button?
    I can do only Project wise from project site & then setting changes. But i want to customize it for all projects which are getting published in Project Server 2013. So doing manually every time project wise not making sense & consuming time also.
    Kindly help..

    I have created custom template but not getting as demonstrated in  blog
    post from Prasanna  specially
    end part where Risk, Issue n all content can be seen. In My case only simple 3-4 items can be seen apart from risk, issue etc.
    After that i saved this custom template to my
    one of EPT in Project Server 2013. But unable to customize my Risk & Issue Category options for all projects. However, i have gone through that post & unable to understand as described in 2010 & i am using 2013 version.
    Kindly let me know after saving custom Template
    to EPT how to move further to customize these risk & issue categories globally.!!

  • Using oDATA for BI in Project Server 2013

    Hi gang,
    I am looking to create a BI report that I was able to do quite readily in previous versions of Project Server.  I'm trying to create a graph that simply plots resource capacity and work as measures over time, with the resource roles as a filter. 
    That is it, no more no less. Using Project Server 2013 ON-LINE.
    I have successfully connected to the tables using the Data Connection Wizard in Excel to do this.  Seems that these are 3 tables I need to get to the data I need--Resource, ResourceTimephasedData, and ResourceTimephasedData.  
    Fact of the matter is, timephased data tables are causing very very very long delays in populating the Pivot Report that I am looking for.  This a fairly new system with hardly any resource and project data in it yet.  This approach does not seem
    user friendly either.  I found it much easier in previous versions.  If I do recall, all my data is in one table before.
    I am wondering if I am approaching this in the wrong way.  Is there another way I should be looking at to get to my data and ultimately my graph?
    \Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

    Hello,
    Unfortunately not, OData if the way forward for reporting in Project Online. Is this still slow for you? When you do get more data in the system I would definitely recommend filtering this as much as possible at the source before Excel etc.
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Project Server 2013 timesheets not showing up for approval

    We're using Project Server 2013 and entering timesheets. I'm a team manager who is set up as the timesheet approver for a few people, including Nicole.
    Nicole opens her timesheet and fills it in for the week.  She applies time to four Administrative tasks and two project tasks.
    Nicole submits her final timesheet for approval.  (We have also tried having her save it first, then to the final submission, with the same results.)
    I go to my approval screen and see the four Administrative tasks listed as separate lines.  I do not see the project tasks.
    I select the four Administrative tasks and approve them.  They disappear when the screen is submitted.
    In previous weeks, and with some other employees, I would immediately see a single line item that said "My Timesheet" for Nicole which I could then approve.  But recently this stopped, and I do not see her timesheet.
    If Nicole checks the status of the timesheet it says it's submitted to me.
    On my Approval page if I go to History, Timesheets this timesheet is not listed under "approved by me" nor is it under "my resources unsubmitted timesheets."  It's in limbo.
    The only fix is for Nicole to recall the timesheet and resubmit it.  Then it shows up on my Approval page.
    Any suggestions?
    -- Paul

    We resolved this. The solution was as follows:
    Go to PWA Settings, and under Security choose Manage Groups.
    Click the Team Members group.
    Scroll to the Categories section, and in the Selected Categories area highlight (select)
    My Tasks.
    Click the box to allow the permission called Adjust Timesheet which is under the grouping for Resource.
    Now don't ask me how or why that works.  It's not a setting that intuitively matches what's going on.  But it fixed it for us.
    By the way, we had a number of other timesheet issues (view failures, etc.) that were all cleared up when we installed the April 2014 Cumulative Update for Project Server 2013, as well as SharePoint 2013 SP1.  I highly recommend both.
    -- Paul
    Paul LoSacco, Web Presence Team, Omnicare

Maybe you are looking for

  • How do you change the Received: From in the message header to correct external address

    We have trouble every so often sending a message to customers will get a bounce back.  Basically it is using our local internal name (mailserver.local) instead of our External name (mail.domain.com).  We have a pretty simple setup one Server (no edge

  • Ipod touch wont turn on and itunes wont detect.HELP!!!!

    Can anyone please help me after updated my ipod touch 8gb 1st or 2nd gen cant remember. when i plug it into my laptop, itunes pops up as normal and it says waiting for ipod then the ipod turns on no logo just a blank black screen but its on, after ab

  • Problem in inserting to MS Access using prepared statement

    I am inserting a record in MS Access db and I am using prepared statement. I am encountering an error.... any help I would really appreciate it. So much time figuring out what the problem is.... ConvertText contxt = new ConvertText(); String bday = (

  • Compare two fields in bex

    Hi Experts, I want to compare two characteristics in bex. Is it possible to do in BEx ? If yes, how can i do it. If char A is equal to char B, display value of this key figure other wise display value of this key figure.

  • How to pass parameter in   HTTP_POST or  HTTP Class

    I want to use HTTP_POST to pass xml info by http_post. I want to pass a simple parameter and receive it in a JSP first for test. I assign the value in the following way: TYPES: BEGIN OF text,          line(256),        END OF text. DATA xml  TYPE TAB