Second row repeats when printing

When I print a spreadsheet the second row of information repeats on each page. How can I stop this?

I guess that it is defined as a header row.
Insert above row 3 a standard row in which you will copy/paste the contents of row 2 then remove the row 2.
After that you will have a single header row so only this one will repeat on different pages.
Yvan KOENIG (VALLAURIS, France) samedi 9 janvier 2010 22:18:46

Similar Messages

Officejet 8500 skips lines when printing MS files

Has anyone ever encountered this?
My HP Officejet 8500 pro prints 3 lines then skips 3 lines repeatedly when printing MS documents but will print all my pdf
files flawlessly. Did I mentioned it is connecected to a network and reacts the same for all users.

Hello -
Sounds more like a "Print Quality" issue. I send you a link with some steps you can try.
If the quality is fine, there is a "calibrate linefeed" in the tools section on the printer. press the wrench, then tools, then calibrate linefeed.
8500A (910A)
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02208875&cc=us&dlc=en&lc=en&product=4083971&tmp...
8500 (909A)
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01624436&cc=us&dlc=en&lc=en&product=3752462&tmp...
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

Reset Row repeater Ui element

Hello,
how can I reset a row repeater, when the user clicks on an action button, the row repeater should be intialized,
can anybody tell me how can I resolve this?
thank you

Invalidate node bound to RowRepeater dataSource
ROWREAP_NODE->INVALIDATE( ).
Regards,
Nikhil Bose

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

What is the reason for missing rows when printing?

Hi all,
My ABAP list display normally when in screen mode (line-size 255).
When printing (apply format X_65_255), 4 last rows missing.
Please tell me how could this happen, how to fix?
Giang

Hallo,
I have same problem.Have you any solution?
regards
Michal Černý

When printing on both sides, get unreadable stripe on second page, Imageclass D420 printer

Have a Canon Imageclass D420printer. Lately I am getting a 1/2 inch wide vertical stripe of smears the full length of the page when printing both sides. The blurred stripe is approximately 3" from the right hand edge of the sheet. The smear shows up on the second side 3" from the left hand edge of the sheet. I reprinted the same document and only printed on one side of the paper and the smear does not occur. Sounds like some roller needs to be cleaned? Anyone have similar problem.
Thanks,
Jerry Hudack

Hi jerryhudack,
To help isolate the cause of the issue, please check the following:
1. Confirm that either LTR or A4 paper between 17 to 21 lb (64 to 80 g/sq.m.) is being used when duplex printing (Note: envelopes cannot be used for 2-sided copying).
2. If using specialty paper, please test standard laser copy paper for comparison.
However, if the above has been checked, the fuser roller in the main unit may be dirty affecting the second side of your duplex printouts. Cleaning the Fuser Roller can help with the issue.
The below procedure will step you through the cleaning process. To prepare, load a sheet of blank LTR paper into the multi-purpose tray and start cleaning. Here are the steps:
Note:
- Use standard paper as the cleaning paper.
- Cleaning the roller takes approximately 130 seconds.
- When some jobs are stored in memory, this function is not available.
1. Press [Menu].
2. Press [ < ] or [ > ] to select <ADJUST./CLEANING>, then press [OK].
3. Confirm a sheet of blank LTR paper is loaded in the multi-purpose tray.
4. Press [ < ] or [ > ] to select <FIX. UNIT CLEANING>, then press [OK].
Cleaning starts.
Throw away the cleaning paper after use, and perform a duplex test print to confirm the issue has been resolved.
If unresolved, please contact us here and we'll be glad to help you further.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Print layout designer - rows repeating

We have modified a delivery document and have referenced Delivery Rows: Item/Service Description to print in the Repetitive Area. We must be doing something wrong, because it is printing the rows 70-80 times each. If a delivery has 2 rows, it is printing row 1 70-80 times and then row 2 70-80 times. Obviously, we only want it to list one time on the delivery slip. What makes this odder is that we have done the exact same thing with A/R Invoice and it works perfectly.
Any ideas?
Thanks!
Jennifer

Jennifer,
If you look at the Item/Service description field on the Delivery PLD rows, it is available by default. Are you talking about a different field by any chance?
If NOT, I wonder if you deleted any fields from the PLD which could have corrupted your report.
Please check and see if the default delivery PLD out of the box is working correctly with your data.
Please let me know.
Suda

Acrobat 8.1.2 hangs when printing from IE 7 under XP Pro x64

Hey Community,
my Acrobat Standard 8.1.2 and my Internet Explorer 7.05.... hang up when printing. Im running XP Pro x64 recent version.
The other features printing from word or scanning do work well.
Has somebody an idea how to fix that bug ?
Thanks Frederik
Funny thing - I just tested it out to describe the situation better:
First test:
I used the embedded printing icon in the toolbar and printing worked fine with www.FTD.de. Adobe did print eather already started or by automatic start on print icon. It worked several times in a row. But often Homepages are not scaled, so only part of the page was on the paper, because there is no option use the properties. Once Adobe opened I saw a new feature that I have downloaded some Multimedia features with the document and if I would like to listen to them.
Second Test:
I did the same job with using the File/Print command, set adobe as printer
and the job hang up in this version. But to say, it is the internet explorer which hangs up. I couldn't minimize the window, IE was just freezed. After terminating IE via task manager the Adobe window of defining the files name showed up, but the process does not finish (X IE)
After opening IE I tried to run Test1 with the still running Acobat but I got en error message from Adobe. After closing and starting Acrobat again the Test1 process worked fine without problem and without prior restart of the machine.
I also tested this with Kapersky deactivated to make sure that the Multiimedia Content does not cause the trouble, but no changes I.E. just
hangs up.
Has somebody an idea?
Frederik

Problem solved. Does only happen with the Internet Explorer 32bit.
With Internet Explorer 64bit it doesn't happen.
Frederik

Problems when printing Sapscript...

We have imported a number Sapscripts in Russian into our unicode system. Looking at the Sapscript I can see Russian text in both the first and next page of the form. However, when printing the first page looks perfect and displays in Russian, however, the second page shows hashes (#) where the Russian text should be.
If none of it worked I might be able to understand what was going on, but when the first page prints fine I find it difficult to understand what is going on.
I have run a check agianst both pages in SE71 and re-activated, but still no joy. What could be going wrong?.
Gary

Thanks guys, I have now found out what the problem was.
All my test data was set up for me by the functional guys. The output messages that were repeated were originally set to language of English rather than Russian, and hence the problem.
Apologies everyone.
Regards
Gary King

Header Row Repeating Erratically

Hi,
I have a problem with a dynamic table using Adobe Lifecycle Designer 8.0 and Adobe Acrobat Professional 8.0.
The table starts with a header row and a single row. The user can add additional rows and the table flows onto multiple pages. Everything appears OK, but when EITHER the user goes back to page 1 or if the user closes and reopens the file, there can be multiple header rows repeated on page 1. Sometimes there might only be 2 header rows, but other times there can be upwards of seven header rows one on top of the other.
This is wrecking the layout and my head. Has anyone had similar problems or could give me a direction as to where I am going wrong.
Thanks in advance.
Niall

Hi,
I am facing the same issue.
My table header has 2-3 rows of data...the data is populated dynamically. The text fields are set to expand, so I have to make the subforms to flowed.
As soon as I set the subforms to Flowed...evrything overlaps on the second page.
Please help.
Regards
Neha

Header Repeats when table runs onto 2nd page

I have a form with a dynamic table in which the user is allowed to add and remove rows to it as needed. The table also has a column on the end of it that will become visible/hidden on the click of a button. It also performs basic arithmatic (addition & multiplication) needed to calculate prices for orders. The problem occurs when the table becomes too large to fit on one page; it flows onto a second page. When the file is saved, closed, then re-opened the table will appear with two repeated headers and two repeated footers. Any idea of what is causing this to occur?
Above is a sample of the table before the problem occurs.
Above is the double footer that appears when the file flows onto a second page, is saved, closed then re-opened.
Any assistance is appreciated.
Thanks.

You can check the checkboxes in the attached image on how you want the header and footer to repeat in the pagination..
If you want the Header to appear only on the first page, then check the first checkbox below.
If you want it to repeat in all the subsequent pages check the second one..
Similarly, if you want the Footer to display only at the end check the last check box..
To set these properties, select the Header Row/ Footer Row in your Heirarchy palette and goto Pagination tab in the Object Properties..
Thanks
Srini

My table header row repeats on page 2, but not thereafter -- why?

The header row on my dynamic table will repeat when the table overflows onto the second page, but if it flows over to a third or fourth page, the header does not repeat. Why is that? I'll be happy to send the form with the troublesome table via email to someone who can help,
Thanks,
Jenny

hi, its weird !!
pls fwd it to [email protected]
Abhinav

Using Row Repeater - adding a remove row button

I have an input field on my view for users to enter Project Numbers along with an Add Button.
When the user enters a project number & clicks on the add button, I append that project to my row repeater. this is working fine.
In my Context, I defined my row repeater as having 2 attributes: project_num and rem_row.
I bound my row repeater to my context node. I wanted to use a Button element as my rem_row, so a user could click on the icon and I could remove that particular row.
However, I can't bind the Button to the rem_row attribute of my context.
is there a way to find out which row the user selects?

what i've done is place a checkbox in the second field and evaluate that on the "on toggle" event. then delete the appropriate row.
this works, but i'd really like an icon there instead of a checkbox and "Remove Row" text

Group Header is not repeating when exported to pdf in 2008 r2

Hi
i have a typical scenario here , when i am trying to repeat my group header it is working fine in report viewer but when i exported to pdf it is not repeating. yea it is working fine in excel.
could some one help me in this as i tried various ways but couldn't able to figure it out
PS: i am using 2008r2
if this is the issue in 2008r2 , did it got fixed in any new version please suggest.
thanks
sharath

Hi sharath,
Based on my understanding, the group header doesn’t repeat when you export report to PDF file.
In Reporting Service, the RepeatOnNewPage property has effect on static row members only and where KeepWithGroup is not None. If value for KeepWithGroup is None, the group header will not appear in a new page. As we tested in our environment, we set FixedData
as True, KeepWithGroup as After and RepeatOnNewPage as True, the group header repeat in second page when export to PDF file. Please refer to screenshot below:
So in your scenario, please check if you have set KeepWithGroup as After. Then export to PDF again to check if group header can repeat in multiple pages. If issue persists, please provide some detail information about your report design. If possible, please
provide some screenshots about your results before and after perform PDF render.
Reference:
Display Headers and Footers with a Group (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

1004 Problem when printing an Excel Form

I have the following code to select 1 or more rows from a worksheet and for each row it populates a form and then prints it.
The code includes the following in the sub below;
If RowN > 2 Then
PrintMRSS_Click
End If
If I run it on Excel 2013 works OK. If I run it on excel 2007 it will print the first form, but it fails with 1004 and other errors when it executes the following line when printing the second and subsequent forms.
Any help would be much appreciated
ActiveSheet.PasteSpecial Format:="Bitmap", Link:=False, DisplayAsIcon:=False
If I comment the lines out and use the option of having to click on the PrintMRSS button all the required data prints OK
Private Sub GetData()
If RowN > RowMP Then
Unload Me
Menu.Show
Exit Sub
End If
Me.MRSSLookup.Caption = "Marine Rescue Sydney - MRSS Vessel Information as at " & Format(Now(), "dd mmm yyyy")
OpenDataWB
Sheets("Renewals").Activate
Me.DMRSSID.Caption = Cells(RowN, 1)
Me.DNAME.Caption = Cells(RowN, 2)
Me.DREGISTRATION.Caption = Cells(RowN, 3)
Me.DMAKE.Caption = Cells(RowN, 4)
Me.DTYPE.Caption = Cells(RowN, 5)
Me.DMATERIAL.Caption = Cells(RowN, 6)
Me.DHULLCOLOUR.Caption = Cells(RowN, 7)
Me.DSUPERSTRUCTURECOLOUR.Caption = Cells(RowN, 8)
Me.DLENGTH.Caption = Cells(RowN, 9)
Me.DBEAM.Caption = Cells(RowN, 10)
Me.D27MHZ.Caption = Cells(RowN, 11)
Me.DVHF.Caption = Cells(RowN, 12)
Me.DMFHF.Caption = Cells(RowN, 13)
Me.D406EPIRB.Caption = Cells(RowN, 14)
Me.DEPIRBNUMBER.Caption = Cells(RowN, 15)
Me.DEPIRBGPS.Caption = Cells(RowN, 16)
Me.DMMSINUMBER.Caption = Cells(RowN, 17)
Me.DSAILNUMBER.Caption = Cells(RowN, 18)
Me.DMOTOR.Caption = Cells(RowN, 19)
Me.DFUEL.Caption = Cells(RowN, 20)
Me.DEMERGENCY.Caption = Cells(RowN, 21)
Me.DMOORINGRAMP.Caption = Cells(RowN, 23)
Me.DCONTACTNAME.Caption = Cells(RowN, 24)
Me.DCONTACTNUMBER.Caption = Cells(RowN, 25)
Me.DOWNERSNAME.Caption = Cells(RowN, 27) & " " & Cells(RowN, 26)
Me.DHOMEPHONE.Caption = Cells(RowN, 31)
Me.DWORKPHONE.Caption = Cells(RowN, 32)
Me.DMOBILEPHONE.Caption = Cells(RowN, 33)
Me.DEMAIL.Caption = Cells(RowN, 34)
Me.DCARREGO.Caption = Cells(RowN, 35)
Me.DTRAILREGO.Caption = Cells(RowN, 36)
Me.DPHOTO.Caption = Cells(RowN, 37)
Me.DHP.Caption = Cells(RowN, 40)
Me.DAUXENGINE = Cells(RowN, 41)
Me.DAUXHP = Cells(RowN, 42)
Me.DAUXFUEL = Cells(RowN, 43)
Me.DVHFDSC.Caption = Cells(RowN, 44)
Me.DMFHFDSC.Caption = Cells(RowN, 45)
CloseDataWB
If RowN > 2 Then
PrintMRSS_Click
End If
End Sub
Private Sub PrintMRSSForm()
DoEvents
keybd_event VK_LMENU, 0, KEYEVENTF_EXTENDEDKEY, 0
keybd_event VK_SNAPSHOT, 0, KEYEVENTF_EXTENDEDKEY, 0
keybd_event VK_SNAPSHOT, 0, KEYEVENTF_EXTENDEDKEY + _
KEYEVENTF_KEYUP, 0
keybd_event VK_LMENU, 0, KEYEVENTF_EXTENDEDKEY + _
KEYEVENTF_KEYUP, 0
Application.Wait Now + TimeValue("00:00:05")
DoEvents
Workbooks.Add
'Application.Wait Now + TimeValue("00:00:02")
ActiveSheet.PasteSpecial Format:="Bitmap", Link:=False, DisplayAsIcon:=False
ActiveSheet.Range("A1").Select
'added to force landscape
ActiveSheet.PageSetup.Orientation = xlLandscape
With ActiveSheet.PageSetup
.PrintTitleRows = ""
.PrintTitleColumns = ""
End With
ActiveSheet.PageSetup.PrintArea = ""
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = ""
.RightHeader = ""
.LeftFooter = ""
.CenterFooter = ""
.RightFooter = ""
.LeftMargin = Application.InchesToPoints(0.75)
.RightMargin = Application.InchesToPoints(0.75)
.TopMargin = Application.InchesToPoints(1)
.BottomMargin = Application.InchesToPoints(1)
.HeaderMargin = Application.InchesToPoints(0.5)
.FooterMargin = Application.InchesToPoints(0.5)
.PrintHeadings = False
.PrintGridlines = False
.PrintComments = xlPrintNoComments
.CenterHorizontally = True
.CenterVertically = True
.Orientation = xlLandscape
.Draft = False
.PaperSize = xlPaperA4
.FirstPageNumber = xlAutomatic
.Order = xlDownThenOver
.BlackAndWhite = False
.Zoom = False
.FitToPagesWide = 1
.FitToPagesTall = 1
End With
ActiveWindow.SelectedSheets.PrintOut Copies:=1
ActiveWorkbook.Close False
End Sub

Thanks for the reply. I have tried to explain the issue more fully below.
The code below calls the form to be populated:
Private Sub PrintMRSS_Click()
OpenDataWB
Application.Visible = False
Application.ScreenUpdating = False
Sheets("Renewals").Activate
RowMP = ActiveSheet.UsedRange.Rows.Count
CloseDataWB
RowN = 2
Unload Me
VesselLookup.Show
End Sub
Then when the form is opened the following code is executed;
Private Sub UserForm_Initialize()
GetData
End Sub
I also have the following code to emulate an alt + PrtScn keyboard event
Private Declare Sub keybd_event Lib "user32" _
(ByVal bVk As Byte, _
ByVal bScan As Byte, _
ByVal dwFlags As Long, _
ByVal dwExtraInfo As Long)
Private Const KEYEVENTF_KEYUP = &H2
Private Const KEYEVENTF_EXTENDEDKEY = &H1
Private Const VK_SNAPSHOT = &H2C
Private Const VK_MENU = &H12
Private Const VK_LMENU = &HA4
getdata populates the form and then calls Sub PrintMRSS to emulate the Alt+ PrtScn, create a new workbook, paste the clipboard to the active worksheet , set up the page layout etc and then print the form.
After printing the form the getdata sub checks if another row of data needs to be printed and then populates the form then prints it, or exits when all the rows in the worksheet have been printed.
All works OK using excel 2013 (Win 8.1), but fails when run on Excel 2007 (Win 7) with 1004 error when the ActiveSheet.PasteSpecial Format:="Bitmap", Link:=False, DisplayAsIcon:=False code is executed.
If I remove the code
If RowN > 2 Then
PrintMRSS_Click
End If
from the getdata sub all the forms print, but you must click on the Print Form button each time.
Hope that makes it clearer

Second row repeats when printing

Similar Messages

Maybe you are looking for