Secondary Resource in the operation "SETUP" of a PPM

Hi experts,
I need to record directly in APO (SCC03) a PPDS PPM with a secondary resource which should be considered in the setup activity
I recorded the following:
Operation          Activity          Activity Type          Mode           Resource
0010                    0010                    S                         1          WLINE_1
0010                    0010                    S                         1          SECONDARY_RESOURCE
0020                    0010                    P                         1          WLINE_1
In the activity 0010 (operation 0010) I placed a flag in the field "setup activity"
When I tried to actívate the PPM, the system sent me the message:
     OPERATION 0010 ONLY CONTAINS A SETUP ACTIVITY
How I can to solve this issue?
How I can include a Secondary Resource in the setup operation of the PPM?
Regards,

How are you logging into the system? Are you using the Fingerprint to login or the password in Client Security Solution (CSS)? Remember that Client Security Solution controls your settings for the Password Manager (Security settings for Fingerprint reader data are controlled by CSS also)
You can go to Start -> All Programs -> ThinkVantage (or Lenovo Care) -> Client Security Solution
If you have CSS version 8, you should see a Menu Bar at the top.. You can click on Advanced , then Reset - this will allow you to clear all password data from the Password Manager.
In addition to the "Reset" option, you also have the ability to "Manage" your settings. Use this to make changes to way you log into Windows at boot. You should have 5 options listed under "Manage". This also allows you to decide whether or not to use the Fingerprint when signing on.
If you are trying to clear you fingerprint data, that can be done from BIOS
F1 -> Security -> Fingerprint -> Erase Internal Fingerprint Data -> "Yes" to confirm.
You should also take the time to read this Guide on Fingerprint Reader Tips below:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-59650
Also read over "Client Security Solution 8.0- Considerations"
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66965
I hope this will provide some help.
Regards,
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Similar Messages

Wrong secondary resource Transferred to iDOC

Hi,
For a Master recipe we have a mainatained a secondary resource for the operation and the resective Prcoess order contents ( operations, sub operations, qtys..etc ) will be moverd to the RTCIS ( ware house management ) system through an iDOC via a customized report. when we checked the iDOC it has picked a wrong sub-operation where as the Process Order still have the correct one.
We are already looking into the code of the custom report. but want to know if we have maintained anything wrong for the sub-operation asseignment as this happens only for few Process Orders .
Thanks,
Nagesh.

There is a Z Program which we have corrected.

"Operations Setup" - System not visible

I added two systems (CRM 2005) in SMSY and put them in a logical component as well as in the solution scenario.
If I open DSWP and try to execute "Operations Setup" I can see only one systems although both systems have the flag "Productive" in SMSY.
What am I missing?
Markus

> Go to Operations Setup / Solution Landscape /
> Solution Settings. Pick the "System Group" tab.
> Right click on Systems in your Logical Component and
> select "Put in Solution".
Thank you for your answer - but as stated above the system is already in the solution
I see there
SAP CRM 5.0
and beside that both systems (MTU:100 and MP1:100) - I do see only MP1:100 in the operations setup.
Markus

Daqmx error num: -50103 with message: The specified resource is reserved. The operation could not be completed as specified.

Hi, I am running a program where I have 4 nidaq cards on a single machine, all connected. I am trying to start a counter and keep getting that error (daqmx error num: -50103 with message: The specified resource is reserved. The operation could not be completed as specified.) in two places in my code. I understand what the error means (you can only have one task of a type per card), but I don't see where that is occuring in my code.
See below for code. I noted the two places where the error is occuring. I am debugging someone else's code, which is part of the problem.
Thanks!
counterTask = 0;
daq_err_check( DAQmxCreateTask( "counter_generation_task",
&(counter_generation_task) ));
daq_err_check( DAQmxCreateTask("counter_count_task",
&(counter_count_task) ));
char co_chan_name[40];
char ci_chan_name[40];
char ci_trig_chan_name[40];
sprintf( co_chan_name, "%s/ctr0", niDev);
sprintf( ci_chan_name, "%s/ctr1", niDev);
sprintf( ci_trig_chan_name, "/%s/PFI9", niDev);
printf("OK1");fflush(stdout);
daq_err_check( DAQmxCreateCOPulseChanTicks( counter_generation_task,
co_chan_name, "", "ai/SampleClock",
DAQmx_Val_Low, 32,16,16) );
daq_err_check( DAQmxCfgImplicitTiming( counter_generation_task,
DAQmx_Val_ContSamps, 1000) );
daq_err_check( DAQmxCreateCICountEdgesChan( counter_count_task,
ci_chan_name, "",
DAQmx_Val_Rising, 0, DAQmx_Val_CountUp) );
daq_err_check( DAQmxCfgSampClkTiming( counter_count_task,
"Ctr0InternalOutput", 1000.0, DAQmx_Val_Rising,
DAQmx_Val_ContSamps, 1000) );
daq_err_check( DAQmxSetRefClkSrc( counter_generation_task, "OnboardClock") );
daq_err_check( DAQmxSetRefClkSrc( counter_count_task, "OnboardClock") );
printf("abt to start counter_count\n"); fflush(stdout);
daq_err_check ( DAQmxStartTask( counter_count_task ) ); // ERROR OCCURS HERE
printf("abt to start counter_gen\n"); fflush(stdout);
daq_err_check ( DAQmxStartTask( counter_generation_task ) ); // ERROR OCCURS HERE
fflush(stdout);
Thanks again for your patience!

I get it when capturing from my mini DV cam (which is not controllable by FCP). To resolve, I have to click Capture Now a split second after I start the DV tape rolling.

The operating system returned error 170(The requested resource is in use)

Hello Experts,
We have a Sharepoint farm where we are receiving OS Error 170 for many days. It results in database shutdown/Start because required transaction file is not available.
The operating system returned error 170(The requested resource is in use.) to SQL Server during a write at offset 0x0000029495e000 in file 'F:\MSSQL10_50.INST1\MSSQL\DATA\****.***. Additional messages in the SQL
Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately
Write error during log flush.
Error: 9001, Severity: 21, State: 4.
The log for database 'DBNAME' is not available
We have checked the Anti Virus but all data files are excluded. We have also disabled the anti virus for some time but still issue persist.
This is a Virtual Machine and no VM snapshot backup is running during the time window.
Please help!
Thanks in advance.
Regards,
Divesh Mathur

Hello Experts,
We have a Sharepoint farm where we are receiving OS Error 170 for many days. It results in database shutdown/Start because required transaction file is not available.
The operating system returned error 170(The requested resource is in use.) to SQL Server during a write at offset 0x0000029495e000 in file 'F:\MSSQL10_50.INST1\MSSQL\DATA\****.***. Additional messages in the SQL
Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately
Write error during log flush.
Error: 9001, Severity: 21, State: 4.
The log for database 'DBNAME' is not available
Hello,
I sense a disk issue here( I am not sure).Log for database is not available seems when data needs to be written on log file it was not avaialble.Can you check with storage team that disk on which SQL server files reside is OK
Secondly did you run DBCC CHECKDB for your database in picture can you paste result of it.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

[823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server.

Hi,
I am facing an issue while loading fresh data into SQL server database.
we are able to load data into staging area, but while processing stored procedures system face bellow error message :
[823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server during a write at offset 0x00000243bd0000 in file 'E:\SQLDB\DBName.mdf'.
Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC
CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
we use windows 2008 R2 with SQL server managment studio 2008.
Appreciate your suggestion.
Thanks in advance.
Best Regards,
Manorath
Manorath

Hi Manorath,
Based on my research, this issue can be occurred in the following scenarios:
You are running a DBCC command on a large database. For example, you are running the DBCC CHECKDB statement on the database. At the same time, you run many DML statements on the database.
You create a database snapshot for a large database. At the same time, you are running many DML statements on the database.
In these scenarios, the SQL Server service stops responding. The DBCC CHECK statement is never completed, and you receive the error message repeatedly.
This issue occurs because the sparse file for a database snapshot file has exceeded the file size limitation in NTFS file system. When the operating system error 1450 occurs, SQL Server enters an infinite retry loop.
To fix this issue, please download and install Cumulative update package 1 for SQL Server 2008 Service Pack 1. Besides, because the fixes are cumulative, each new release contains all the hotfixes and all the security fixes that were included with the previous
SQL Server 2008 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix.
Reference:
http://support.microsoft.com/kb/967164
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Tabs under the operations and operations setup are not visible...DSWP issue

Hi Gurus,
After I select the active solution from DSWP txn.I couldn't see the tabs (Solution landscape,servicce level reporting,system monitoring etc etc)on the right hand side.Left hand side Solution overview ,operations setup,operatiosn tab are displayed...when clicked on one of these nothing is displayed on right side...Could any tell me if there is any configuration problem or any service needs to be activated.
Thanks
Allan

Hi Allan,
Yes, maybe you missed some of the ICF services that need to be activated.
Check IMG:
SAP Solution Manager -> Basic Settings -> SAP Solution Manager System -> HTTP Services.
Read all the documentation for each step.
Regards,
Valdecir

OSP Resource is defaulted to the operation in Job Order

Hi
The OSP resource is not attached to any of the operation in my routing for an assembly.But When i create a discrete Job Order for that assembly,OSP resource is attached automatically for one of the operation in the Job Order.
Can someone explain me how this is happening?.From where this OSP resouce is getting attached or derfaulted.
Regards
Deepak

Like Sandeep mentioned it cannot have an OSP resource unless
1) Routing is referenced with another assembly which has OSP
2) Has a an alternate routing which has OSP and is used in Job creation
3) Manually adding OSP resource to a the specific job
If none of these are true please check for customizations done.

Using the PPDS setup matrix

Hello All -
I have 3 products A,B and C which are run on a single line during a particular week(day). We have certain set-up times when we move from one product to another. Here are the set-up times:
The sequence in which these products run on the line is decided by the plant scheduler during production planning. The production planners run heuristics and peform manual changes to the planned orders. They know which product runs in which shift but they do not necessarily adjust the planned orders to the hourly level.
What we would like the system to do is somehow incorporate the set-up times when we move from one product to another. We would like to see the the resource being consumed during the set-up time.
Also, we are not in a position to use the optimizer. So any solutions involving the Optimizer are out of scope. Just want to achieve this using heuristics.
To achieve this, I have created the following master data:
1) Created 3 setup groups SG1(A), SG2(B), SG3(C).
2) Created a setup matrix SM1 and set up the transitions for all the above combinations.
3) Assign the setup group to operations in a ppm
4) Assign the setup matrix to the resource
I then created 3 planned orders in production planning for the SAME day. All 3 have the same availability time 23:59:59 and based on run-rates we have different start times.
I have the following questions:
1) Which DS heuristic should I use to adjust the start times and the end times of these orders by considering the set-up times in the setup matrix?
The resource should basically be consumed during these setup times. I have looked at "Reschedule" function in the DS planning board but I get an error when I run this. Please see end of this post for the error. The message says I may not have free capacity, but I do. I am using backward scheduling and infinite.
2) Is there anyway the set-up times/matrix can be considered during production planning itself and not during detailed scheduling?
3) Can the option of "Schedule Sequence" work for my scenario.
Appreciate all your help.
Varun
Error during scheduling
Message no. /SAPAPO/OM043
Diagnosis
The system could not schedule an order, operation or activity.
This could have the following causes:
The resource does not have any free working time or capacity.
If you have set planning direction backwards in the strategy profile:
There is not enough working time or capacity available for scheduling between now and the scheduling date.
If you have set planning direction forwards in the strategy profile:
There is not enough working time or capacity available for scheduling between the scheduling date and the end of the planning area.
If you plan characteristics-dependently:
You have assigned characteristics to operations of the order that do not agree with characteristics of the resources on which the operations are to be processed.
The system cannot find any suitable characteristics on the resources and so it cannot schedule.
Procedure
Depending on which of the above reasons is the cause, change the following settings:
Change the working times and capacities of the resources.
Set the planning mode "infinite planning" in the strategy profile.
Activate the planning direction forwards or backwards and reverse in the strategy profile.
Change the characteristics that you have assigned to the resource.

Thank you all -
It was a mistake on my part. I was supposed to create a new "set up" activity before processing activity and make that relevant to set-up. I had the processing step checked for setp all this while. Now its working.
Thanks
Varun

How to define JMX policy for the operation ALSBConfigurationMBean.getRefs

Hello,
I'm trying to configure the JMX policies of my Weblogic Server.
I have followed the recommandations from the http://docs.oracle.com/cd/E13222_01/wls/docs100/ConsoleHelp/taskhelp/security/DefinePoliciesforMBeans.html link.
I try to run the following code on a client side :
ALSBConfigurationMBean lConfigMBean = (ALSBConfigurationMBean) lDomainMBean.findService(ALSBConfigurationMBean.NAME, ALSBConfigurationMBean.TYPE, null);
lConfigMBean.getRefs-BusinessServiceQuery);
I got the exception :
Caused by: weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on Resource com.bea.wli.sb.management.configuration.DelegatedALSBConfigurationMBean Operation: invoke , Target: getRefs
     at weblogic.management.mbeanservers.internal.SecurityInterceptor.isAccessAllowedInvoke(SecurityInterceptor.java:1173)
     at weblogic.management.mbeanservers.internal.SecurityInterceptor.checkInvokeSecurity(SecurityInterceptor.java:813)
     at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:443)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323)
     at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:544)
     at weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380)
     at $Proxy154.getRefs(Unknown Source)
     at com.csg.cs.services.tech.TECH_RegistryService_1_RegistryPortImpl.getServiceRef(TECH_RegistryService_1_RegistryPortImpl.java:224)
     at com.csg.cs.services.tech.TECH_RegistryService_1_RegistryPortImpl.lookup(TECH_RegistryService_1_RegistryPortImpl.java:117)
     ... 63 more
And so I want to setup the JMX policy to give the rights to my client. But in the JMX Editor the ALSBConfigurationMBean doesn't exist, and I don't know which bean I have to set up.
Anyone do know where I can find how to define policy for the Operation "getRefs" of the "ALSBConfigurationMBean" ?
thanks and regards

OEG provides several filters for encryption (XML, S/MIME and PGP). It's also possible to accept client certificates via 2-way SSL or route to a destination over 2-way SSL. For further information check out the OEG docs.

The Operating System returned Error 27(The drive cannot find the sector requested.)

On a Windows 2008 R2 server running SQL 2008 Standard on a Raid 5, when performing a backup on the databases via copy to another local drive I receive and The operating system returned error 27(The drive cannot find the sector requested.) to SQL Server during
a write at offset 0x0000002fd204000 in the file F:\SQLDATA\Email_Images.mdf. The server is a HP DL380p Gen8. I've contacted HP thinking this was a Hardware issue but HP ensure me its not and to contract Microsoft support.

Hi,
Unfortunately, the available information is not enough to have a clear view of the occurred behavior. Please offer us what backup method you are using, did you want to backup
the data to the CSV, the origional error you have got.
1. The best method would be to have separate disk drive for each cluster SQL instance and add the disk to the specific SQL group and add it to the dependency of the SQL resource.
There would be less overhead with this process other than having to create two disks, one of each instance
2. You could consider creating a file sharing resource on cluster and add the backup disk to this resource group and use it to back up the databases of both the instances
to single disk. The down side of this method would be, all the databases backups will fail if the fileshare resource goes down. You cannot use GUI to take the backup, need additional setup/maintenance for the fileshare resource group
http://support.microsoft.com/kb/224967
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

MRS (Multi Resource Scheduling) - Show operation status in Planning Board

Because the current MRS thread is some long and complicated I chose to move this question into a seperate thread:
Initial question:
Like many companies, it is not unusual at my customer for their Planners to create orders with multiple operations, particularly since many orders require different crafts to perform the work. When the Planning Board is launched and Planners lok at work scheduled for the past week they want to be able to see at a glance which operations have been completed and which operations, perhaps from the same order, have not and may need to be rescheduled. Their preference is to select "final confirmation" when using transaction IW41 and thereby set the operation system status to CNF when the work on an operation has been completed. They then want to somehow use this CNF operation status to drive something visual in the graphical Demand layout display and Resource layout display to enable the Planner to see at a glance that the operation has been completed. I've tried several approaches with configuration of abstract statuses and the user interface profile without success. My customer's interest in being able to see the completion status of an operation in the MRS Planning Board makes a lot of sense to me. I'm hoping someone can help me with a technique for modifying the Planning Board so that it displays the completion status of an operation in a visual way.
Response from Varun Verma:
Hi Mark,
The problem at your customers end is nothing new.
What you can do ( many other customers have done it in similar way ) is:
1) you integrate the status CNF into MRS.
Check the customizing: Basic Settings -> Assign ERP Objects -> Status
2) configure in MRS that for status CNF, the assignments and demands (only in item work list or Hotlist) is colored to GREEN (or any other color)
Check customizing: Set Up Scheduler Workplace -> Workplace Profiles -> Define User Interface Profiles
Thus the users will know visually, that the green colored assignments are already completed.
By the way, in your work list you can also filter the demands based on their status
Regards
Varun.
Followup question:
Varun,
Thanks for the response. I thought I had tried this but perhaps it's because in the UI profile I had not entered something in both the status groups for assignments and the status groups for demands. I have a bit more testing to do but it appears that the demand status now gets updated from the operation status of PCNF (linked to abstract status WORK_START) and CNF (linked to abstract status WORK_STOP). I also get a red bar (C4) for PCNF and a green bar (C1) for CNF. Do you have a better status group I should be using in place of C1 and C4? Status groups C1 and C4 give me a bar but it doesn't look like the demand bar with a outline and alphanumeric description of the demand, it's just a colored bar.
I know the work list can be filtered based on their MRS "planning" status, however, it doesn't appear to permit filtering by the status of the operation unless I add the operation status as an additional field in the worklist. Is there something I'm missing here? And even if it did, my customer wants to be able to see the CNF status indication in the Demand layout and schedule using the work centers so the worklist is not being shown like it is in the Resource layout.
Mark
Edited by: Mark Scott on Aug 10, 2009 3:35 PM

Hi Mark,
Well I assumed that you have confirmations integration active !! But I guess not because you say that the status is not integrated always.
What you need to do:
1) I assume you have SP05 or later.
2) Implement the user exit: CONFPM05. In the implementation of this exit you need to call FM: /MRSS/RSG_PM_ORDER_CONFIRM
3) Go to customizing: Basic Settings --> Assign ERP Objects --> Status
-- Here, define an abstract status (MRS Status) for confirmed and partially confirmed
-- map it to R3 status CNF and PCNF.
After this, whenever you enter confirmation for PM order from transaction IW41, the status will be integrated.
Now you can use the MRS statuses defined in step 3 to configure the colors.
Implementing the user exit CONFPM05 might require some technical input. But it is easy. Just a few double clicks and copy paste.
Contact an ABAP developer for the same.
This should solve your issue.
Regards
Varun

How do I disactivate the operating system on my macbook that was stolen from me?

So in early September someone who I know broke into my apartment and stole my computer, I called the police and filed a report. I have some very snesitive documents on the computer that I would prefer no one to get their hands on. I was able to find the operating system disk I had purchsed to update the operating system a few years ago so I have all of the information associated with the OS. I do not know the IP address of the computer or exactly where it is (obviously or I would have it back). I want to basically turn the OS off so my files on the computer cannot be opened or used. Is there any way to disactivate the OS remotely like you can with Windows (if you use the product key on another PC it deactivates the previous version). I don't know if it matters but it was a late 2006 macbook (black) model 13" screen.

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

The operation can't be completed because some items had to be skipped. For each item, choose File Get Info, make sure "Locked" is deselected, and then check t

The following error comes up when I try to install the updated Firefox:
"The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
When I follow the instructions in the error message, it shows that my user name has read and write access. There are a couple other items that are read only. I tried to change this to read and write, but the Sharing and Permissions options are greyed out and will not let me change them. What is the work around for this? I would really like to install the new firefox.
Thanks.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default('''This will NOT delete profile info such as bookmarks and history'''):
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

The operation can't be completed because the item "folder name" is in use

Hi everyone,
I think this is quite a common issue but I don't find it really easy to find a solution.
I have a folder containing a folder and no files on a server that I cannot delete, for the life of me.
Whether I use shortcuts or drag the main folder to the bin, I have the same result "The operation can't be completed because the item "secondary folder name" is in use". This folder is just 1 year old so, obviously, I have restarted the computer more than once since then which means that the folder is NOT in use.
I'd like to clean up a bit and remove some stuff and this is bugging!
Hope someone can help me.
Thanks in advance!

If you don't have other backup data on it, reformatting external drive could solve the problem.

Secondary Resource in the operation "SETUP" of a PPM

Similar Messages

Maybe you are looking for