Section title in OBIEE11g

Hi Experts
I have a dashboard , contains 3 analysis , each analysis in different sections
I have set the section title .
I want to IF user "collapse" section then SECTION title show otherwise not showing section title .
how it can be achieved?
Regards,
RanchooO

Thanks K T, but I'm not sure I understand: do you mean that the text in the horizontal should automatically go over to the vertical?
I had added that text myself ("This is a sample") in the Master Layout a while back.
So, I guess I could change the text in the master, but I suppose whatever new text I write would then be applied to *all* sub-sections of this chapter? But I need different vertical view sub-titles for each sub-section.
This is how it looks in the master:
I don't know if there's a solution? If it's a fault with IBA it seems a pretty significant one.
thanks again

Similar Messages

Add section titles to "table of contents".

I am attempting to build a book from a Genealogical Generational listing that indicates the generation number at the beginning of each section. I also add that number along with the section page number at the bottom of each section. i.e. Generation 1 page n.
Is there any way to automatically pickup the section title to add into the "Table of Contents"?
Using my present method, highlight the section title, click "Paragraph Style" (edit to my preference); will show only page 1 for all section beginning pages and seems unprofessional. alternatively, I could just leave out the page number somehow and attempt to "Tab" the first page of each section. Basically, what I would like is:
"Generation 1
Generation 2" etc.... or something similar without page numbers and the section name is the page link to the first page of that section.
Tks
Sparkgapper

Hi Sparkgapper,
Is this a Pages question? YOu are in the Numbers for Mac forum.
From your profile, is this an iWork '09 question?
quinn

How do I display course and section titles?

I am a 'vetran' Lectora and RWD uPerform developer so Captivate is relatively new to me.
It seems that 'how things are done' in Captivate is very Adobe... powerful BUT relatively convoluted.
It is very easy to set up the other elearning tools to automatically display the current course name and section titles... however I haven't a clue how this can be accomplished in Captivate 4. I have uploaded a graphic to illustrate what I am asking. Please see the area in the red circle. Can anyone help out?
Figuring out how to do this by example would be nice, unfortunately, Adobe's included examples offter very little and are generally repeats of the same material. I guess they prefer to sell training, rather than give away their secrets. :-] On that note, my second question is... what is considered the best on-line or self-paced training for Captivate 4?
Thank you,
Doug

Hello Rick,
Thanks for the quick response. And thanks for not pointing out my obvious spelling mistake. Doh! Really, my technical writing is usually better.
Captiv8r wrote:
Hi there
In the future, please insert images inline using the camera icon. Well, only if you want us to see them. If you don't care if we see them, feel free to continue attaching.
Hmmm... I see. A bug in the forum s/w? Interestingly enough, I can still see my attachment. I will reattach in this reply, doing it your way.
Captiv8r wrote:
You would accomplish this by inserting a Text Caption. There really isn't anything "automatic" about it though. You need to either type what you want to appear directly into the Caption or you will need to create a variable to store the value and insert the variable into the Caption. Then at various points in the project, change the variable if you want it to read differently.
If I am understanding you correctly, I am rather disappointed that I cannot set "Section Title" to display the "Slide Label". Course title can be set as a variable and it doesn't need to change but the "Section Title" (or rather "Slide Label") would change with each slide. This is a basic function in both Lectora and RWD uPerform.
Captiv8r wrote:
shawninvancouver wrote:
It seems that 'how things are done' in Captivate is very Adobe... powerful BUT relatively convoluted.
Keep in mind that while Adobe now owns Captivate, it's a product they received via the purchase of Macromedia. So it's not your typical "Adobe" product from that perspective.
I not really knocking Captivate 4 and I do understand I am still on the left side of the learning curve, but I am finding that it is a lot quicker and more intuitive to accomplish tasks in Captivate 4. I understand this came from Macromedia but after several iterations, it is a lot like other Adobe products (obviously their intent). Again, this is not necessarily bad... just different. As an example (and off topic) I still have a habit of gravitating back to the infuriatingly unreliable (but super easy/quick to accomplish tasks) Corel Draw because Adobe Photoshop is infuriatingly convoluted (but super-uber reliable).
Thanks for your help Rick.
BTW, I am interested in your ebooks but there are no descriptions, or prices, and there is no actual purchase link to Google stores. I have a feeling that they are all Captivate version 3.... and there are probably too many differences between version 3 and 4. Sigh...

Why can't I type a section title on one line?

I have converted a pdf to Word 2010 document and am trying to make corrections. There are section titles, such as "Executive Director". In the pdf, the two words appear on the same line. In the Word document, they appear on two lines. When I try to retype them to the one line, the program will not allow it. It seems as if there is a margin at the end of "Executive". Looking at hidden markings, I see there is a paragraph marking after "Director" and wonder if this has anything to do with it. There are several titles lines within the document, so I need a solution to continue my project. Can anyone tell me what I need to do to type both words on the same line?

Bernd Alheit wrote:
You should try a forum for MS Word.
Just to clarify, the reason is that Reader can't create PDF files. You're creating your file via Word's internal PDF engine, which has nothing to do with Adobe, so your question is more suitable on a Microsoft forum.

Inserting section title on each page

Is there a way to insert the title of the section automitacally at top (or bottom) of each page?
When I insert "section title," it actually inserts the "book title," from the document section of the inspector.
Thanks.
b

I'm using my own, simple template. I've created a template for all sections, and a template for the pages in each section, to which I've attached the name of that section in the header.
The odd thing is that if I go into the "book" section and pick a page template on which I've put a text box as a header, I can double-click the textbox and I'm given an option to "insert section title and/or number." That would suggest that I can have the section name in the header of each page in the section, but somehow I've not made the correct link, and all I get when I click "insert section name" is the name of the book.
For now, I'm not going into this further: Either I really don't understand the method behind the organization of these templates, or there the method isn't worked out. I'm sure I've missed something, but can't spend the time figuring it out, so I've done it manually. More digging around is just taking time away from me and also bothering helpful people like you.
Thanks very much for the input.

Why don't section titles appear in toc?

Have a book with multiple chapters, and in one of the chapters the sections titles don't appear in the chapter toc. I obviously deleted something, but can't figure out what?
Thanks.

In the inspector, under document>TOC, are sections listed there?

Add section title to header/footer? Using Pages 5.2 (or later)

I couldn't find a way to automatically have the title of the current section in the header or footer of a document.
Potentially I am missing something, I haven't tried to do this before, but it seems like a basic function of having a TOC in the first place.

Add an image to any page in the section, then drag it where you want it to appear on each page.
Reduce the opacity using the slider in the Style pane of the Format inspector to change the object’s transparency.
Choose Arrange > Section Masters > Move Object to Section Master (from the Arrange menu at the top of your computer screen).

Dynamic text (Titles/Section titles)

Hi,
I'm diving into Keynote for the first time and am struggling with trying to figure out how to create dynamic text within my masters.
I'd like to be able to have the user enter the title of the presentation on their title slide (using the title master) and then have that title propagate through the other slides in the footer of the section/content slides as meta data.
Is there a solution for how to do this? Essentially, I just need to flag the text box with a variable and then repurpose that variable in a differently styled text box on other slides.
Thanks in advance for any help!

Keynote and PowerPoint are both presentation packages; however, they're not identical, and offer different feature sets. If you can't live without a feature that PPT offers but Keynote doesn't, use PPT. However, in my experience most of the things that PPT will do can be done in Keynote - it's just a matter of figuring out how.
I've been using Keynote (various versions) for several years, after having used PPT for several years. Yes, I've found things that Keynote didn't do that I was used to being able to do in PPT, but the only one that I couldn't find a workaround for was motion-path animation, and it appeared as a Build option ("Action") in Keynote '08.
If there is a feature you would like to see in Keynote, you can always use the "Provide Keynote Feedback" link in the "Keynote" menu to send you ideas to Apple. There's no guarantee that your feature will appear, but that's the way to let Apple know that you would like to see something changed.
As for your original problem, one simple way to propogate the title information in the footers of the other slides is to add a small text box to the master(s) used for the other slides and copy the title into it. No, it's not automatic, and if you change the title you must also change the text box on the master(s), but it's a workaround.
There is definitely a non-flat learning curve associated with the transition from PPT to Keynote, but once you pick up some familiarity with Keynote, you may find it's much more intuitive to use.

Pages - changing section titles

Hello...
I am exporting a Pages file, to ePub.
My Pages file is split up into 20 sections.
When viewing the ePub on my iPhone, the table of contents lists all of these sections as Section 1...Section 2...Section 3...and so on.
Is there a way, be it through Pages or another application, to change these titles of the sections?
Thanks!

Yes. Beforee you export to ePub in pages. Add a Table of Contents to your Pages document (see Pages help to see how). This Table of Contents will then get added to your ePub file and replace all of the generic "Section x" names to the ones from your Pages table of contents.

Data Merge: Grouping data under a shared section title

I am a total newb to using data merge in indesign. I watched the "Automating a Catalog with Data Merge" video and found it very helpful. I am creating a catalog for an auto parts company so I have a csv file with a field for Make, Model, Year Range, Part Number. I use Make as a header and put the other information below it. I do not want it to repeat Make (Honda) over and over.
Rather than:
Honda
Accord         2005-2010     Part Number 4214-0100
Honda
Civic          2005-2010     Part Number 4214-0100
Honda
Odyssey     2005-2010     Part Number 4214-0100
I would like it to display:
Honda
Accord         2005-2010     Part Number 4214-0100
Civic          2005-2010     Part Number 4214-0100
Odyssey     2005-2010     Part Number 4214-0100
Can someone please give me some advice?
Thanks!

P Spier wrote:
JonMedford wrote:
I have tried this method but and I think this would suffice but it still doesnt format nicely. It puts too much space inbetween each row of data and not enough space between the sections I want to separate. I suppose I could do this by brute force once I get all of my data in, but this will be dreadful to do for a multiple hundred page catalog. Setting the merge to delete blank lines appears not to work. Not sure if this is a bug or not.
A real catalog plugin is probably the way to go, but if you stick with Data Merge you can control spacing with paragraph styles, most likely. Apply a style with Space Before added to the paragraph containing the section.
As far a removing blank lines, if the line isn't being removed, it probably means it isn't really blank. Blank means there can be NOTHING on the line except a field, and the field value in that record is null. If you have punctuation or white space of any sort on the line in additon to the field tag, it's never going to be blank, so you should be doing whatever concatenation you need in the data file first, as John mentioned.
I might just do that. I am staring at this 138 page manual for the Smart Catalog plugin and trying to use the darn thing with very little success. There is not GUI formatting available and it is really frustrating.

How do I bookmark a section title?

surely there's gotta be a way to do it. right now, only inline text can be bookmarked.

I have custom titles, and I just click somewhere in the timeline where the title is then click at that spot on the title clip itself. This will bring it up in the viewer where you can select the little rectangle at the lower left of the viewer window. I do not click on the little "thingy" you mentioned. I always just click on a letter in the actual title then drag it to where I want it in the viewer. I have clicked in the text bounding rectangle near the actual title text before, and that has worked, but I understand people have been having trouble clicking on the little "thingy" lately. Hope this helps.
stephen

Category Titles all ending in e.g. Windows 8?

Why do many of the category titles on this forum end in "e.g. Windows 8"? I'm looking under hardware, but Windows 8 is of course software, I don't get it. Is there some meaning here I'm missing? Or is it what seems more likely that the creator of the categories wasn't good with communicating in English or Latin?

In the past the forum had a dedicated section when a new OS was released_such as Windows 7. At the time there was a seperate forum section for support. The forum has grown by leaps & bounds and it has been needed to divide categories more and more. With all of the categories we now have it is a relief not to have yet another section to monitor-such as Win 8 dedicated.
I agree though, it is a bit confusing or maybe just not aesthetically pleasing, imo, to have Windows 8 listed in all the sections titles. Hoping to see it removed soon myself.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How do I change the formatting of the section text in portrait view?

I'm attempting to write my first book using iBooks Author. I've got everything looking pretty good so far in landscape view, but when it changes to portrait view, I don't like the automatic formatting and I can't figure out how to change it. I chose the "Contemporary" template. In landscape view, I changed the section title and the default formatting (white over an image) looks fine. When I change to portrait mode, the section title turns to red, which I would like to change to another color. However, I can't even select the text in this view. I can see the style in the paragraph styles drawer, but I don't know how to change it there either. Is it possible to change the color, and if so, how? Thanks.

Already advised....
Basically, after each chapter or section is finished in LS, use the Orientation icon, top menu bar to change to portrait and edit content. Images are automatically reduced in size etc,.
Fig 1 - I used this to demonstarte Bookmarks ( in red) but take this as your start point in LS
Fig 2
As you can see from the Orientation icon shaded in Blue at top - this is Portrait mode.
The image has changed to the tempate default - so you need to change the template or drop the same image in. I had changed the background and removed the top embellisment in LS so again, you may need to change your template - that aside the section title and text are white in both examples.
Fig 3.
I have changed the section and text colour. Apps is in white intentionally and the bookmark stays in the link colour red
Fig 4 Back in LS mode - see icon top menu
The section colour stayed white, but the text changed to yellow
Fig 5
I changed the section colour to red.
OK thats how changing things affects each mode including the image sizes.
IF the red section title ( in LS) is selected - in the styles drawer you can see it - switch to portrait, select the section title and apply the same style. Essentially, think you are creating two separate books and edit the potrait to match - where possible the LS version.
Apple have deemed some things, like TOC page images cannot be changed individually in Portrait mode.

How do I add titles to a completed movie?

I am new to imovie. I have imported a completed movie in MP4 from my previous PC. I can only add a title to the beginning of the movie, but would like to insert section titles, but since all the clips have been joined, any attempt to insert such a title, goes to the beginning of the movie. Any suggestions?

If you select a title (yellow border) you can drag it anywhere in your timeline.
Geoff.

The DEVICES section no longer appears!

Hello! Happens that there was a time when, if I opened the app on my iphone and had the desktop version running, there would appear a section titled "DEVICES". I thought it was a problem with my (then) current iphone, but now even with a new one, nothing changed. The thing is that that way I could add songs from my local files to MY MUSIC list, (that's how I listened to Taylor Swift on Spotify), but now I can only add local files to separate playlists, and now if I play MY SONGS playlist on my phone, it won't include these songs. Did this feature disappear? Is there a way I can do what I intend to? Note 1. Even though the DEVICES section no longer shows up, I can stream and control the music and volume from the computer to the phone, so... the computer does detect my phone (?). Thank you so much for your help!QuechoRamirez

The devices section will be coming back in a future update.
In the meantime:
You won't be able to see an indication in the desktop client that the device is paired with the desktop client. But as long as they both are on the same WiFi network you should be able to trigger the local files sync by toggling the offline toggle on the playlist on your device. Just make sure that the local files are in a playlist of their own (not just the built in local files playlist) so that this will work.

Section title in OBIEE11g

Similar Messages

Maybe you are looking for