Section Views in 3d
In acrobat 3d you can take section cuts, but then when you send the pdf to someone that only has Reader 8.1.1, they don't have the section icon. Wonder what I'm missing; there isn't much point in being able to take a section only in the full version, the whole point of it all is to communicate a design to someone that only has Reader. Normally the person with the full version also has Catia (or other), and he doesn't need acrobat to look at his own model.
It doesn't seem to make any difference what view settings are active when I save the pdf, it opens with a default type view.
First of all, this is an Acrobat forum. You would probably need to be using Acrobat to do that. It sounds like you're trying to turn functionality on for the free Adobe Reader application using your product rather than Acrobat. You won't find that answer here. I doubt you find it anywhere. I can't imagine Adobe would give you that answer.
Similar Messages
-
How to Save Section to be a dxf document? why Save Section View button is not on?
dear ..
i use adobe Reader xi version 11.0.0 , when i want to use Save Section View button , i fine this button is not on?
my question is :
how to Save Section to be a dxf document? why Save Section View button is not on?
hope to hear your reply !thanks!
best regards!
charles
e-mail: [removed]Hi Sandesh,
Please provide the complete code from print & save button.
Thanks & Regards,
Balamurugan G -
Cross section view of 3D model in director
Hello everyone
I would like to know if it is possible to create cross
section views (to define a cutting plane to be able to look inside
the model) of a 3D model using Lingo . If so, can you give some
insight on how to do it?
Thks
xnr> I would like to know if it is possible to create cross
section views (to
> define a cutting plane to be able to look inside the
model) of a 3D model using
> Lingo.
This might also give you an interesting option:
http://director-online.com/buildArticle.php?id=1104 -
Sectional view with nontransparent cut surface??
Hallo,
I have the following question. I want to creat a sectionel view with a nontransparent cut surface at the sites where material would be cut. Like in a mechanical drawing. Is this possible? I tried to set the opacity of the section plane on 100% but then its only nontransparent from the other side.
thanks in advance!
MaxDo you mean 'capping' the areas where the Cross Section intersects the model, so the appropriate sections appear to be solid where the cut occurs? If so, this is not possible.
-
Custom view in contract account screen
We added custom fields/view in contract account screen. The new section is confidential and can only be seen if there is proper authorizaion.
I was able to hide the fields in the new view/section but not the view/section itself. If the user has no proper authorization, all the fields are hidden but it still leaves a box with nothing in it.
Is there a way to hide this box or to only display the view/section according to certain conditions?Hi Bluemountain,
I do not believe there is an option to hide the section / view completely through any of the configs. Since SAP is building that subscreen area based on config, it would not be possible to suppress it through code either.
Warm Regards,
Sumith -
Cross-section option sometimes missing on 3D PDFs
I publish 3D PDFs of complex mechanisms for my subscribers. Sometimes Adobe Reader will offer a cross-section option and sometimes not. The 3D PDFx are not made by Acrobat Pro but with an embedded PDF generator inside my mechanical CAD software. I don't make any changes in the way PDFs are generated by the program.
Any ideas?Good questions. - in addition which version of Acrobat is it, and for Windows or Mac?. I tried a few combinations of making single and multiple cross section with face and non-cross section views on a few files in Acrobat 11 on Windows, and could not see any problem.
-
JTextPane custom views keyboard problem
Hi,
I am trying to implement a custom view in the JTextPane. The view is appearing fine but the keyboard cursor movements are not working. The cursor no longer moves from line to line as it used to when using the arrow keys. However Iam able to move from the end of 1 line to the start of next line. This is when I override section view with my custom view.
In another case, when I override paragraph view, then the cursor size is equal to the paragraph height and I get a tall cursor the size of the paragraph. I can no longer navigate the lines in the paragraph.
Could someone tell me why this is happening.
cheers,
Hugo
My views are setup as follows:
class XmlViewFactory implements ViewFactory {
// Creates the XML View.
public View create(Element elem) {
String kind = elem.getName();
if (kind.equals(AbstractDocument.ContentElementName)) {
return new LabelView(elem);
else if (kind.equals(AbstractDocument.ParagraphElementName)) {
return new ParagraphView(elem);
} else if (kind.equals(AbstractDocument.SectionElementName)) {
return new ResponseView(elem); // <------- my custom view
// return new BoxView(elem, View.Y_AXIS);
} else if (kind.equals(StyleConstants.ComponentElementName)) {
return new ComponentView(elem);
} else if (kind.equals(StyleConstants.IconElementName)) {
return new IconView(elem);
return new LabelView(elem);Hi,
Here's an update to my earlier question.
The problem happend to be not with any custom views as earlier mentioned. The following usage doesn't work.
if (kind.equals(AbstractDocument.ContentElementName)) {
return new LabelView(context, elem);
else
if (kind.equals(AbstractDocument.ParagraphElementName)) {
return new ParagraphView(elem);
} else if (kind.equals(AbstractDocument.SectionElementName)) {
return new BoxView(elem, View.Y_AXIS);
} else if (kind.equals(StyleConstants.ComponentElementName)) {
return new ComponentView(elem);
} else if (kind.equals(StyleConstants.IconElementName)) {
return new IconView(elem);
return new LabelView( context, elem);even when no custom view is involved. I get a blank JTextPane.
cheers
OV -
How to display keywords in browser view
I watched the tutorial for keywords at
http://www.apple.com/aperture/tutorials/#organizecompare-keywords
and it shows a view that I can't seem to replicate.
The tutorial shows a browser window and the keywords are displayed below the images.
Also, I am having difficulty adding a keyword to multiple images. I can select multiple images but I can only seem to change the highlighted image.
-MarkOK, now I see what you mean. If you had written "below each image" in the first place, it would have been easier to understand what you mean.
First you have to create a view that show only the keywords. This can be done in the Metadata pane in the Inspector. Click the gear wheel and choose "New view..." followed by giving it a name. Then, check "Keywords" after clicking the IPTC button in the bottom of the pane.
Then, to set the preference for this view, you go to the Metadata pane in the Preferences. In the first section; "Viewer" you can set which metadata view you want to show up either below or over each image. Over each image means on top of each image but in the bottom part of the images. You will see the difference.
Then, to show only the keywords just uncheck the "Show Labels" checkbox.
Regards
Paul K -
Blank awr report shown in oracle standars edition 11g (11.2.0.1.0)
Hi, friends ..
I am using Oracle 11g standars edition(11.2.0.1.0) on solaris 10 platform.I do have a very strange probleem..when iam trying to capture awr report i am getting a blank
awr report contain ing nothing...like below section
---------------------------------------------------------------------------->
WARNING: Since the DB Time is less than one second, there was minimal foreground activity in the snapshot period. Some of the percentage values will be invalid.
WORKLOAD REPOSITORY report for
DB Name DB Id Instance Inst num Startup Time Release RAC
DISDB 771054785 disdb 1 30-Dec-10 10:12 11.2.0.1.0 NO
Host Name Platform CPUs Cores Sockets Memory (GB)
dissemination-new Solaris Operating System (x86-64) .00
Snap Id Snap Time Sessions Cursors/Session
Begin Snap: 1 30-Dec-10 11:30:21
End Snap: 2 30-Dec-10 12:30:52
Elapsed: 60.51 (mins)
DB Time: 0.00 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: M M Std Block Size: K
Shared Pool Size: 0M 0M Log Buffer: K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 0.0 0.0 0.00 0.00
DB CPU(s): 0.0 0.0 0.00 0.00
Redo size:
Logical reads: 0.0 1.0
Block changes: 0.0 1.0
Physical reads: 0.0 1.0
Physical writes: 0.0 1.0
User calls: 0.0 1.0
Parses: 0.0 1.0
Hard parses:
W/A MB processed: 0.0 0.0
Logons:
Executes: 0.0 1.0
Rollbacks:
Transactions: 0.0
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: Redo NoWait %:
Buffer Hit %: In-memory Sort %:
Library Hit %: Soft Parse %:
Execute to Parse %: 0.00 Latch Hit %:
Parse CPU to Parse Elapsd %: % Non-Parse CPU:
Shared Pool Statisitics Not Available
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
DB CPU 0 100.00
Host CPU (CPUs: Cores: Sockets: )
Load Average Begin Load Average End %User %System %WIO %Idle
Instance CPU
%Total CPU %Busy CPU %DB time waiting for CPU (Resource Manager)
Memory Statistics
Begin End
Host Mem (MB):
SGA use (MB):
PGA use (MB):
% Host Mem used for SGA+PGA:
Main Report
Report Summary
Wait Events Statistics
SQL Statistics
Instance Activity Statistics
IO Stats
Buffer Pool Statistics
Advisory Statistics
Wait Statistics
Undo Statistics
Latch Statistics
Segment Statistics
Dictionary Cache Statistics
Library Cache Statistics
Memory Statistics
Streams Statistics
Resource Limit Statistics
Shared Server Statistics
init.ora Parameters
Back to Top
Wait Events Statistics
Time Model Statistics
Operating System Statistics
Operating System Statistics - Detail
Foreground Wait Class
Foreground Wait Events
Background Wait Events
Wait Event Histogram
Wait Event Histogram Detail (64 msec to 2 sec)
Wait Event Histogram Detail (4 sec to 2 min)
Wait Event Histogram Detail (4 min to 1 hr)
Service Statistics
Service Wait Class Stats
Back to Top
Time Model Statistics
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Operating System Statistics
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Operating System Statistics - Detail
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Foreground Wait Class
s - second, ms - millisecond - 1000th of a second
ordered by wait time desc, waits desc
%Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Captured Time accounts for % of Total DB time .00 (s)
Total FG Wait Time: (s) DB CPU time: .00 (s)
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) %DB time
DB CPU 0 100.00
Back to Wait Events Statistics
Back to Top
Foreground Wait Events
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Background Wait Events
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Wait Event Histogram
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (64 msec to 2 sec)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 sec to 2 min)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 min to 1 hr)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Statistics
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Wait Class Stats
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
SQL Statistics
SQL ordered by Elapsed Time
SQL ordered by CPU Time
SQL ordered by User I/O Wait Time
SQL ordered by Gets
SQL ordered by Reads
SQL ordered by Physical Reads (UnOptimized)
SQL ordered by Executions
SQL ordered by Parse Calls
SQL ordered by Sharable Memory
SQL ordered by Version Count
Complete List of SQL Text
Back to Top
SQL ordered by Elapsed Time
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by CPU Time
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by User I/O Wait Time
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Gets
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Reads
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Physical Reads (UnOptimized)
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Executions
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Parse Calls
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Sharable Memory
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Version Count
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
Complete List of SQL Text
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
Instance Activity Statistics
Instance Activity Stats
Instance Activity Stats - Absolute Values
Instance Activity Stats - Thread Activity
Back to Top
Instance Activity Stats
No data exists for this section of the report.
Back to Instance Activity Statistics
Back to Top
Instance Activity Stats - Absolute Values
No data exists for this section of the report.
Back to Instance Activity Statistics
Back to Top
Instance Activity Stats - Thread Activity
No data exists for this section of the report.
Back to Instance Activity Statistics
Back to Top
IO Stats
IOStat by Function summary
IOStat by Filetype summary
IOStat by Function/Filetype summary
Tablespace IO Stats
File IO Stats
Back to Top
IOStat by Function summary
No data exists for this section of the report.
Back to IO Stats
Back to Top
IOStat by Filetype summary
No data exists for this section of the report.
Back to IO Stats
Back to Top
IOStat by Function/Filetype summary
No data exists for this section of the report.
Back to IO Stats
Back to Top
Tablespace IO Stats
No data exists for this section of the report.
Back to IO Stats
Back to Top
File IO Stats
No data exists for this section of the report.
Back to IO Stats
Back to Top
Buffer Pool Statistics
Buffer Pool Statistics
Checkpoint Activity
Back to Top
Buffer Pool Statistics
No data exists for this section of the report.
Back to Buffer Pool Statistics
Back to Top
Checkpoint Activity
No data exists for this section of the report.
Back to Buffer Pool Statistics
Back to Top
Advisory Statistics
Instance Recovery Stats
MTTR Advisory
Buffer Pool Advisory
PGA Aggr Summary
PGA Aggr Target Stats
PGA Aggr Target Histogram
PGA Memory Advisory
Shared Pool Advisory
SGA Target Advisory
Streams Pool Advisory
Java Pool Advisory
Back to Top
Instance Recovery Stats
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
MTTR Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
Buffer Pool Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
PGA Aggr Summary
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
PGA Aggr Target Stats
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
PGA Aggr Target Histogram
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
PGA Memory Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
Shared Pool Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
SGA Target Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
Streams Pool Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
Java Pool Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
Wait Statistics
Buffer Wait Statistics
Enqueue Activity
Back to Top
Buffer Wait Statistics
No data exists for this section of the report.
Back to Wait Statistics
Back to Top
Enqueue Activity
No data exists for this section of the report.
Back to Wait Statistics
Back to Top
Undo Statistics
Undo Segment Summary
Undo Segment Stats
Back to Top
Undo Segment Summary
No data exists for this section of the report.
Back to Undo Statistics
Back to Top
Undo Segment Stats
No data exists for this section of the report.
Back to Undo Statistics
Back to Top
Latch Statistics
Latch Activity
Latch Sleep Breakdown
Latch Miss Sources
Mutex Sleep Summary
Parent Latch Statistics
Child Latch Statistics
Back to Top
Latch Activity
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Latch Sleep Breakdown
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Latch Miss Sources
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Mutex Sleep Summary
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Parent Latch Statistics
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Child Latch Statistics
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Segment Statistics
Segments by Logical Reads
Segments by Physical Reads
Segments by Physical Read Requests
Segments by UnOptimized Reads
Segments by Optimized Reads
Segments by Direct Physical Reads
Segments by Physical Writes
Segments by Physical Write Requests
Segments by Direct Physical Writes
Segments by Table Scans
Segments by DB Blocks Changes
Segments by Row Lock Waits
Segments by ITL Waits
Segments by Buffer Busy Waits
Back to Top
Segments by Logical Reads
Total Logical Reads: 1
Captured Segments account for 4.6E+06% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Logical Reads %Total
SYS SYSTEM I_SYSAUTH1 INDEX 15,008 1500800.00
SYS SYSTEM I_OBJ2 INDEX 4,752 475200.00
SYS SYSTEM TAB$ TABLE 2,176 217600.00
SYS SYSTEM I_JOB_NEXT INDEX 1,856 185600.00
SYS SYSTEM SYS_C00646 INDEX 1,664 166400.00
Back to Segment Statistics
Back to Top
Segments by Physical Reads
Total Physical Reads: 1
Captured Segments account for 400.0% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Physical Reads %Total
SYS SYSAUX WRH$_SYSMETRIC_SUMMARY_INDEX INDEX 3 300.00
SYS SYSTEM KOTAD$ TABLE 1 100.00
Back to Segment Statistics
Back to Top
Segments by Physical Read Requests
Total Physical Read Requests: 1
Captured Segments account for 400.0% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Phys Read Requests %Total
SYS SYSAUX WRH$_SYSMETRIC_SUMMARY_INDEX INDEX 3 300.00
SYS SYSTEM KOTAD$ TABLE 1 100.00
Back to Segment Statistics
Back to Top
Segments by UnOptimized Reads
Total UnOptimized Read Requests: 1
Captured Segments account for 400.0% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type UnOptimized Reads %Total
SYS SYSAUX WRH$_SYSMETRIC_SUMMARY_INDEX INDEX 3 300.00
SYS SYSTEM KOTAD$ TABLE 1 100.00
Back to Segment Statistics
Back to Top
Segments by Optimized Reads
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Segments by Direct Physical Reads
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Segments by Physical Writes
Total Physical Writes: 1
Captured Segments account for 1.1E+04% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Physical Writes %Total
SYSMAN SYSAUX MGMT_METRICS_RAW_PK INDEX 27 2700.00
SYS SYSAUX WRH$_SYSMETRIC_HISTORY TABLE 16 1600.00
SYS SYSAUX WRH$_SYSMETRIC_HISTORY_INDEX INDEX 16 1600.00
SYSMAN SYSAUX MGMT_SYSTEM_PERF_LOG_IDX_01 INDEX 9 900.00
SYS SYSAUX SMON_SCN_TIME TABLE 9 900.00
Back to Segment Statistics
Back to Top
Segments by Physical Write Requests
Total Physical Write Requestss: 1
Captured Segments account for 5.1E+03% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Phys Write Requests %Total
SYSMAN SYSAUX MGMT_METRICS_RAW_PK INDEX 11 1100.00
SYS SYSAUX SMON_SCN_TIME TABLE 9 900.00
SYSMAN SYSAUX MGMT_SYSTEM_PERF_LOG_IDX_01 INDEX 6 600.00
SYSMAN SYSAUX MGMT_CURRENT_METRICS_PK INDEX 4 400.00
SYS SYSTEM I_JOB_NEXT INDEX 2 200.00
Back to Segment Statistics
Back to Top
Segments by Direct Physical Writes
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Segments by Table Scans
Total Table Scans: 1
Captured Segments account for 900.0% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Table Scans %Total
SYS SYSTEM I_OBJ2 INDEX 9 900.00
Back to Segment Statistics
Back to Top
Segments by DB Blocks Changes
% of Capture shows % of DB Block Changes for each top segment compared
with total DB Block Changes for all segments captured by the Snapshot
Owner Tablespace Name Object Name Subobject Name Obj. Type DB Block Changes % of Capture
SYS SYSTEM I_JOB_NEXT INDEX 896 58.95
SYSMAN SYSAUX MGMT_METRICS_RAW_PK INDEX 160 10.53
SYSMAN SYSAUX MGMT_CURRENT_METRICS_PK INDEX 112 7.37
SYS SYSAUX SMON_SCN_TIME TABLE 80 5.26
SYSMAN SYSAUX MGMT_SYSTEM_PERF_LOG_IDX_01 INDEX 64 4.21
Back to Segment Statistics
Back to Top
Segments by Row Lock Waits
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Segments by ITL Waits
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Segments by Buffer Busy Waits
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Dictionary Cache Stats
No data exists for this section of the report.
Back to Top
Library Cache Activity
No data exists for this section of the report.
Back to Top
Memory Statistics
Memory Dynamic Components
Memory Resize Operations Summary
Memory Resize Ops
Process Memory Summary
SGA Memory Summary
SGA breakdown difference
Back to Top
Memory Dynamic Components
No data exists for this section of the report.
Back to Memory Statistics
Back to Top
Memory Resize Operations Summary
No data exists for this section of the report.
Back to Memory Statistics
Back to Top
Memory Resize Ops
No data exists for this section of the report.
Back to Memory Statistics
Back to Top
Process Memory Summary
No data exists for this section of the report.
Back to Memory Statistics
Back to Top
Back to Memory Statistics
Back to Top
SGA breakdown difference
No data exists for this section of the report.
Back to Memory Statistics
Back to Top
Streams Statistics
Streams CPU/IO Usage
Streams Capture
Streams Capture Rate
Streams Apply
Streams Apply Rate
Buffered Queues
Buffered Queue Subscribers
Rule Set
Persistent Queues
Persistent Queues Rate
Persistent Queue Subscribers
Back to Top
Streams CPU/IO Usage
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Streams Capture
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Streams Capture Rate
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Streams Apply
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Streams Apply Rate
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Buffered Queues
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Buffered Queue Subscribers
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Rule Set
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Persistent Queues
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Persistent Queues Rate
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Persistent Queue Subscribers
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Resource Limit Stats
No data exists for this section of the report.
Back to Top
Shared Server Statistics
Shared Servers Activity
Shared Servers Rates
Shared Servers Utilization
Shared Servers Common Queue
Shared Servers Dispatchers
Back to Top
Shared Servers Activity
No data exists for this section of the report.
Back to Shared Server Statistics
Back to Top
Shared Servers Rates
No data exists for this section of the report.
Back to Shared Server Statistics
Back to Top
Shared Servers Utilization
No data exists for this section of the report.
Back to Shared Server Statistics
Back to Top
Shared Servers Common Queue
No data exists for this section of the report.
Back to Shared Server Statistics
Back to Top
Shared Servers Dispatchers
No data exists for this section of the report.
Back to Shared Server Statistics
Back to Top
init.ora Parameters
No data exists for this section of the report.
Back to Top
Dynamic Remastering Stats
No data exists for this section of the report.
Back to Top
End of Report
---------------------------------------------->>
here intresting is that i also can't have the memory section view also.i trien to clear awr repositary and recreate it..bounce database,also tried taking different snap value.But does notmake any change.can u tell me why tha happening..and how can i get a good awr report.Hi there,
I have covered this in my blog entry on the subject. Check that link out for more licensing information and other resources.
The problem you are experiencing is caused by the fact that AWR is part of the DIAGNOSTIC and TUNING packs of Oracle 11g, which as of 11g is no longer a standard feature of the database but rather an optional extra which must be licensed in addition to your default Oracle Standard Edition package. In terms of the licensing, you just need to license it as an optional extra so that you will actually be using it legally, and then you can go ahead and enable it.
While it may be an additional licensed item, it is actually installed on your DB by default, but is just not enabled. So, once you have cleared the licensing issue, you will be free to enable diagnostics by setting the new database parameter, CONTROL_MANAGEMENT_PACK_ACCESS. You can do this by running the following as a dba:
<pre>alter system set control_management_pack_access="DIAGNOSTIC+TUNING" scope=both;</pre>
After running this command, your database will start accumulating diagnostic information. Note that you will need to wait until new snapshots are created in which the new diagnostic information will be available. I found that although most of the information became available after setting CONTROL_MANAGEMENT_PACK_ACCESS, it was only once the database was restarted that all of the information became available. I have seen many people reporting similar behavior.
Old snapshots will obviously continue to give the errors because they did not have the diagnostic information available at the time. -
Add fields to Business partner t-code BP
Hi All,
I have a requiremnt to create a BP in the counterpary role .
1.This requirement involves to add some custom fields to the table control of the payment details table control in the company code view.I have tried EEWB and BPT ,but both of them creates a new customer data tabstrip .
Any ways to add additional custom fields to the existing table control.
2. where can we find the assignmet of fields to the field groups in r3 side to maintain the BP transaction.
Regards,
Prabhu.Hi Prabhu,
Your approach is on the correct path. Basically, this is what you need to do -
1. Create the new fields using EEW. Let this create a new tab.
2. Hide this tab for all roles, EXCEPT the role for which you want to see it. You can do this in SPRO.
3. You can assign fields to field groups in transaction BUPT-> Control-> expand the menus and you will see Screens, Sections, Views, Field groups... choose field groups and within this menu you can assign fields to field groups.
Hope this helps you.
Cheers,
Rishu. -
How to change the field name in SUS
HI,
In the section view all PO's, I want to change the field name <b>document number</b> to <b>invoice number</b>.Please do let me know how to go about it.
Thanks in advance ,
ManuHi,
The text ID should be first identified in the BSP (BBP_SUS_UI/DOC_NUMBER?)
Next execute SOTR_EDIT and use the FInd button. Enter the package of the BSP object (BBP_SUS_U?) and select the language as English. Execute the program and you will a complete list of text used in SUS screen. Locate the text ID as above and double click to change based on what you need.
Regards. -
Impossible to See the log after executing a logic
Hello,
Most of the time I develop on a VM. On this system i have acces to a execution log once i have launch a Logic though a SSIS package ( BPC 5.1 ). But on the production system i don't have acces to the execution log. Is there a parameter i can change to have acces to this information ?
Kind regards,
DamienHi,
To have access to log of logic you need to have access to follow patch:
fileserver\C$\BPC\Data\Webfolder\YourAppset\YourApplication\Private Publication\Your User\
So you can check if you already have access there and in case if you don't have then you have to ask your IT to share Webfolder with only right access for your user or for everyone if more users would like to have this kind of access.
Any way usually if you run a DM package to run the logic you should be able to see the log directly into Log of the package.(you have there a section view script logic log).
Regards
Sorin Radulescu -
Hide the expansion icon on a jtree.
I need to hide the expansion icon (the "+") on a jtree.
I tried to use DefaultTreeCellRenderer and the L&F options, but they hide all of the "+" icons of the tree. I need to hide the icons depending if the node has no-leaf icons.
Thanx.
pmadridbhi,
you can change the property of common section view attribute. which is default in month. if u use input date component , i think you can overcome your problem.. -
Tools menu palette names missing
I have a new copy of PSE 11 and the tools menu palette names on the left side of the screen are missing. I notice that some tutorials show the palette names and others do not. How do you turn these names on or off?
Thanks, harryjco40Yes, I'm in Expert Mode. It appears it's somethig to do with screen resolution - I've just found a possible answer at:
http://answers.oreilly.com/topic/3606-photoshop-elements-11-hints-and-tips/
"Adobe also redesigned the Tools panel in Elements 11. It's always two columns now, for one thing. Also, if your screen is tall enough, the tools are grouped into labeled sections: View, Select, Enhance, Draw, and Modify. (If your screen resolution is minimal for Elements, you won't see these section headings.)"
My laptop is a Toshiba with a resolution of 1366x768, so I think the vertical resolution might be the problem.
Thanks for your help. -
MultiColumn text in JEditorPane.
I'd like to represent solution for the multi column text. It may be used in JEditorPane and JTextPane.
Opinions?
regards,
Stas
import javax.swing.*;
import javax.swing.text.*;
import view.*;
public class Application extends JFrame {
JEditorPane edit=new JEditorPane();
public Application() {
super("Multicolumn text example");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
edit.setEditorKit(new MultiColumnEditorKit());
this.getContentPane().add(new JScrollPane(edit));
this.setSize(200,200);
public static void main(String[] args) {
Application application1 = new Application();
application1.show();
class MultiColumnEditorKit extends StyledEditorKit {
ViewFactory defaultFactory=new MultiColumnFactory();
public ViewFactory getViewFactory() {
return defaultFactory;
class MultiColumnFactory implements ViewFactory {
public View create(Element elem) {
String kind = elem.getName();
if (kind != null) {
if (kind.equals(AbstractDocument.ContentElementName)) {
return new LabelView(elem);
} else if (kind.equals(AbstractDocument.ParagraphElementName)) {
return new MultiColumnParagraphView(elem);
} else if (kind.equals(AbstractDocument.SectionElementName)) {
return new MultiColumnView(elem, View.Y_AXIS);
} else if (kind.equals(StyleConstants.ComponentElementName)) {
return new ComponentView(elem);
} else if (kind.equals(StyleConstants.IconElementName)) {
return new IconView(elem);
// default to text display
return new LabelView(elem);
// root (section) view class
import java.awt.*;
import javax.swing.text.*;
public class MultiColumnView extends BoxView {
int columnWidth=100;
int columnHeight=100;
int majorTargetSpan=0;
int[] majorOffsets=null;
int[] majorSpans=null;
int minorTargetSpan=0;
int[] minorOffsets=null;
int[] minorSpans=null;
Point[] starts;
int columnCount=1;
public MultiColumnView(Element elem, int axis) {
super(elem, axis);
protected void layout(int width, int height) {
columnHeight=height;
super.layout(columnWidth,height);
protected void layoutMajorAxis(int targetSpan, int axis, int[] offsets, int[] spans) {
super.layoutMajorAxis(targetSpan,axis,offsets,spans);
majorTargetSpan=targetSpan;
majorOffsets=offsets;
majorSpans=spans;
performMultiColumnLayout();
for (int i=0; i<offsets.length; i++) {
spans=columnHeight;
offsets[i]=0;
protected void layoutMinorAxis(int targetSpan, int axis, int[] offsets, int[] spans) {
super.layoutMinorAxis(targetSpan,axis,offsets,spans);
minorTargetSpan=targetSpan;
minorOffsets=offsets;
minorSpans=spans;
performMultiColumnLayout();
for (int i=0; i<offsets.length; i++) {
View v=getView(i);
if (v instanceof MultiColumnParagraphView) {
MultiColumnParagraphView par=(MultiColumnParagraphView)v;
spans[i] = par.columnCount*columnWidth;
offsets[i]=par.columnNumber*columnWidth;
protected void performMultiColumnLayout() {
if (majorOffsets==null || minorOffsets==null || minorOffsets.length!=majorOffsets.length) {
return;
int childCount=majorOffsets.length;
int verticalStartOffset=0;
int columnNumber=0;
starts=new Point[childCount];
for (int i=0; i<childCount; i++) {
View v=getView(i);
starts[i]=new Point();
if (v instanceof MultiColumnParagraphView) {
MultiColumnParagraphView par=(MultiColumnParagraphView)v;
par.verticalStartOffset=verticalStartOffset;
par.columnWidth=columnWidth;
par.columnHeight=columnHeight;
par.columnNumber=columnNumber;
par.performMultiColumnLayout();
starts[i].y=verticalStartOffset;
starts[i].x=columnNumber*columnWidth;
verticalStartOffset=columnHeight-par.restHeight;
columnNumber+=par.columnCount-1;
columnCount = columnNumber + 1;
public float getPreferredSpan(int axis) {
if (axis==View.Y_AXIS) {
return columnHeight;
else {
return columnWidth*columnCount;
public float getMinimumSpan(int axis) {
if (axis==View.Y_AXIS) {
return columnHeight;
else {
return columnWidth*columnCount;
public float getMaximumSpan(int axis) {
if (axis==View.Y_AXIS) {
return columnHeight;
else {
return columnWidth*columnCount;
public int viewToModel(float x, float y, Shape a, Position.Bias[] bias) {
//define child container
if (starts!=null) {
for (int i=starts.length-1; i>0; i--) {
if ((starts[i].x<x && starts[i].y<y)
|| (starts[i].x+columnWidth<x)
return getView(i).viewToModel(x,y,a,bias);
return getView(0).viewToModel(x,y,a,bias);
public void paint(Graphics g, Shape a) {
super.paint(g,a);
Rectangle r=a.getBounds();
int shift=columnWidth;
g.setColor(new Color(240,240,240));
while (shift<r.width) {
g.drawLine(r.x+shift,r.y,r.x+shift,r.y+r.height);
shift+=columnWidth;
//paragraph view class
import java.awt.*;
import javax.swing.text.*;
public class MultiColumnParagraphView extends ParagraphView {
protected int verticalStartOffset=0;
protected int columnCount=1;
protected int columnNumber=0;
protected int restHeight=0;
int[] majorOffsets=null;
int[] majorSpans=null;
int[] minorOffsets=null;
int[] minorSpans=null;
protected int columnWidth=100;
protected int columnHeight=100;
Point[] starts;
public MultiColumnParagraphView(Element elem) {
super(elem);
protected void layout(int width, int height) {
super.layout(columnWidth,0);
protected void layoutMajorAxis(int targetSpan, int axis, int[] offsets, int[] spans) {
super.layoutMajorAxis(targetSpan,axis,offsets,spans);
majorOffsets=offsets;
majorSpans=spans;
performMultiColumnLayout();
offsets=majorOffsets;
protected void layoutMinorAxis(int targetSpan, int axis, int[] offsets, int[] spans) {
super.layoutMinorAxis(targetSpan,axis,offsets,spans);
minorOffsets=offsets;
minorSpans=spans;
performMultiColumnLayout();
offsets=minorOffsets;
protected void performMultiColumnLayout() {
if (majorOffsets==null || minorOffsets==null || minorOffsets.length!=majorOffsets.length) {
return;
int childCount=majorOffsets.length;
int vo=verticalStartOffset;
int cc=1;
starts=new Point[childCount];
for (int i=0; i<childCount; i++) {
starts[i]=new Point();
if (vo+majorSpans[i]>columnHeight) {
cc++;
vo=0;
starts[i].y=vo;
starts[i].x=(columnNumber+cc-1)*columnWidth;
majorOffsets[i]=vo;
vo+=majorSpans[i];
restHeight=columnHeight-vo;
minorOffsets[i]=(cc-1)*columnWidth;
if (columnCount!=cc) {
columnCount = cc;
preferenceChanged(getView(0),true,true);
public float getPreferredSpan(int axis) {
if (axis==View.Y_AXIS) {
return columnHeight;
else {
return columnWidth*columnCount;
public float getMinimumSpan(int axis) {
if (axis==View.Y_AXIS) {
return columnHeight;
else {
return columnWidth*columnCount;
public float getMaximumSpan(int axis) {
if (axis==View.Y_AXIS) {
return columnHeight;
else {
return columnWidth*columnCount;
public int viewToModel(float x, float y, Shape a, Position.Bias[] bias) {
int ind=getViewIndexAtPoint((int)x,(int)y,a.getBounds());
View v=getViewAtPoint((int)x,(int)y,a.getBounds());
Shape childAlloc=getChildAllocation(ind,a);
return v.viewToModel(x,y,childAlloc,bias);
protected int getViewIndexAtPoint(int x, int y, Rectangle alloc) {
if (starts!=null) {
for (int i=starts.length-1; i>0; i--) {
if ((starts[i].x<x && starts[i].y<y)
|| (starts[i].x+columnWidth<x)){
return i;
return 0;
protected View getViewAtPoint(int x, int y, Rectangle alloc) {
if (starts!=null) {
for (int i=starts.length-1; i>0; i--) {
if ((starts[i].x<x && starts[i].y<y)
|| (starts[i].x+columnWidth<x)){
return getView(i);
return getView(0);
public Shape getChildAllocation(int index, Shape a) {
Rectangle r=super.getChildAllocation(index,a).getBounds();
r.x=starts[index].x+3;
r.y=starts[index].y+3;
return r;If you want to replace the existing text then just use:
setText(DAT);
Maybe you are looking for
-
My iPhone isn't recognized by iTunes.
My iPhone isn't recognized by iTunes so I can't synchronize anything. Same thing with my iPad. I tried re installing a couple times already but nothing changed. Does somebody know what else to do?
-
I have a 60GB Ipod colour and use it to save my photos. I have just come back from Athens - which supplies 260v/50Hz power. Now I am back in England (240V/50Hz), I get an error when I plug the Ipod into my Win XP Dell Inspiron 1100 laptop. The error
-
Hey everyone, has anyone noticed any odd behavior in GarageBand since Mountain Lion came out? My GB worked very well, then over the last couple of weeks after installing ML, it's running poorly. It'll crash a LOT, I keep getting "Disk is too slow. (P
-
Navigating back from transaction iview
Hi All , I have a webdynpro application and i have to navigate to a transaction iview from this WD Application .. once use is done with performing the transaction . user should be able to come back to the previous screen ( Webdynpro view) .. how to h
-
Add fields in the SRM Change PO Screen
Hi SRM Gurus, I have a requirement to add a buyer id and country id in the Change Purchase Order (Extended Search of the Find Screen). Can anyone suggest which structure needs to be extended for adding the 2 fields so that it appears in the Change Pu