Secure cookie not supported by XSQL Servlet

Secure cookies are not supported by the XSQL engine.
The "set-cookie" that delivers writes "plain text" cookies on the client site.
Since these cookies could contain relevant information (e.g. oracle username/password credentials) and since these could not be removed from application side, it is crucial that XSQL provides support for secure cookies.
Any patch / comment is appreciated.

Hi Andrea,
This is more of an issue for BC-JAS-WEB than the UWL....
I have seen only a few other messages that are quite similar to this: Could you please check the following:
Is ICM being used?
It is possible that the http stream is corrupted.
There are some known issues between ICM and J2EE that can cause this
kind of behaviour.
Please review SAP notes 1048692 and 1068501 which
provide 2 different ways to solving the issue (update the SP level or
patch the http and server_jsp components).
If ICM is not used, then please check if there is some other proxy
between J2EE and the client. For testing, try requesting J2EE
directly, bypassing any network devices or proxies and check if the
issue occurs.
Best Regards,
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

Similar Messages

2008 Airport Express utility doesn't work all of a sudden, name reverted to ID, lost security, message not supported.

The Airport Express I purchased in 2008 worked fine this morning, but when I tried to use Wi-Fi with my cell phone and iMac the light was green on the AE but no signal. I unplugged AE and unplugged my modem, plugged in my modem, plugged in my AE, it turned green but no signal - that is, the name I had given it did not appear on either my iMac of cell phone. Then, out of the blue, the original ID for my AE shows up on the iMac and phone and when I selected it my Wi-Fi worked, and is working. The problem is there now is no security. I got a message that Airport Utility did not support or something like that. So then I took the old CD that came with AE (in 2008) and loaded that on my iMac so I could re-establish WPA security. It seemed to load okay but then the following message popped up, "AirPort can't be installed on this disk [my Macintosh HD]. The version of Mac OS X on this volume is not supported." Well, yes, since I'd purchased my AE I'd gone through all the cats and recently had upgraded to Mountain Lion, 10.8.5, several weeks ago. But since this morning I had done nothing new.
So, it's 12:30am, Apple Care is not open - I'm not even sure I'm still covered - so maybe some night owl out there can tell me what I need to do. I'm beginning to suspect it might have to do with my operating system upgrade, but don't understand why this problem should suddenly crop up after several weeks. Any ideas out there? Oh, and incidentally, my AE was cutting off a lot about a year ago and I took it into an Apple Store and they did something with the software in the device and the cutting off improved but still would occur at least twice a week - something I just lived with.

Then, out of the blue, the original ID for my AE shows up on the iMac and phone and when I selected it my Wi-Fi worked, and is working.
My first thought is that the AirPort Express is normally good for 4-5 years on average, so you may be getting some signals in that regard.
The AirPort Express reset itself back to factory default settings. The big question now is if you re-configure it again whether it will hold those settings. Not likely....my opinion.
The other problem that you have is that Mountain Lion operating system no longer supports the older version of the AirPort Express that you have.
Oh, and incidentally, my AE was cutting off a lot about a year ago and I took it into an Apple Store and they did something with the software in the device and the cutting off improved but still would occur at least twice a week
It's really time for a new AirPort Express, which will offer much faster reliable performance....and it will be compatible with AirPort Utility on the Mountain Lion operating system.

When I try to access some websites, I get a "cookie not supported" message

I first noticed that I couldn't click through on links from a website and now there are websites I can't access at all. I have tried clearing my cookies but that didn't fix the problem

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you use a bookmark then try to navigate to the page by starting from its main (home) page in case the bookmark is corrupted.
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

HP Protect tools Security Manager - not supported on this sytem

Hi, i try to install the software hp protect tools security manager but the installation are blocked.
the driver of fingerprint is ok.
have you any suggestion? I can use another software to control the password through fingerprint reader?
thanks
Maurizio

i reinstall windows frameworks 4.0 and i resolve the problem.

Problem testing XSQL Servlet, XSQL-0007

Hi,
I'm testing the XSQL Servlet, as a lot of people do. I installed
it on Apache Web Server with JRUN servlet engine, following the
Release Notes, but it does not work at all. I get the following
message, when I try to run helloworld.xslq:
Oracle XSQL Servlet Error
XSQL-0007: XML Parsing error on requested page
<2,1>: Expected EOF
I checked it several times but it seems to be right, exactly as
in the release notes.
I read here that other people (SHankar) had the same problem, but
your answer did not solve it:
: : Oracle XML Team wrote:
: : : I presume by XML source code, you are referring to
the .xsql
: : : source code. If that is the case then you have not
: registered
: : : the XSQL servlet to that extension in the web server you
are
: : : using. Check out that section of the installation
: : instructions.
Please, tell me what can I do to start testing it, since I can
test nothing, it does not work.
Regards,
Esteban
null

Oracle XML Team wrote:
: The only thing that can cause
: this error is if the page you
: are requesting is not a well-formed
: XML document.
: Oracle XML Team
: http://technet.oracle.com
: Oracle Technology Network
I'm requesting the page that you provide as a demo:
helloworld.xsql
I checked it and it is a well-formed XML document.
Anyway, other examples that you provide with the xsqlservlet zip
file don't work either.
null

Does the 5800 builtin browser not support cookies ...

I am used to use offline web applications using javascript (the URL starts with file:///.... . They work on *every* browser, under Windows, Linux, S60, etc. On many S60 devices but NOT on the 5800 Web browser.
Here a test:code which gives 'no cookies'on Web. When I put this file online, it does work normally. How can I enable cookies in local pages ?

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
    </head>
<body>
<script type="text/javascript">
function testCookies() {
   var exp = new Date();
   exp.setTime(exp.getTime() + 1800000);
   // first write a test cookie
   setCookie("cookies", "cookies", exp, false, false, false);
   if (document.cookie.indexOf('cookies') != -1) {
     alert("Got Cookies!");
   else {
    alert("No Cookies!");
   // now delete the test cookie
    exp = new Date();
    exp.setTime(exp.getTime() - 1800000);
    setCookie("cookies", "cookies", exp, false, false, false);
function setCookie(name, value, expires, path, domain, secure) {
   var curCookie = name + "=" + escape(value) +
    ((expires) ? "; expires=" + expires.toGMTString() : "") +
    ((path) ? "; path=" + path : "") +
    ((domain) ? "; domain=" + domain : "") +
    ((secure) ? "; secure" : "");
   document.cookie = curCookie;
function getcookievalue(name)
    var ind;
    name += '=';
    str = document.cookie;
    if ((ind = str.indexOf(name)) != -1)
        var end = str.indexOf(';', ind);
        if (end == -1) end = str.length;
        str = str.substr(ind+name.length, end-ind-name.length);
        str = unescape(str);
        return str;
    return '';
function setcookievalue(name, value)
    name += '=';
    var expDays = 100;
    var exp = new Date();
    exp.setTime(exp.getTime() + (expDays*24*60*60*1000));
    var expire = '; expires=' + exp.toGMTString();
    var str = name + escape(value) + expire;
    document.cookie = str;
//alert(getcookievalue('test'));
//setcookievalue('test', new Date());
testCookies();
</script>
</body>
</html>
Nokia 5800
FW 30.0.011

Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookie files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies
You can also check if DOM Storage is enabled.
*http://kb.mozillazine.org/dom.storage.enabled

Can not make XSQL servlet running under Jrun 3.1! need help

Hi,
I tried to run Oracle XSQL servlet under JRun 3.1,I did servlet mapping, such as
<servlet-name>oracle-xsql-servlet</servlet-name>
<servlet-class>oracle.xml.xsql.XSQLServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>oracle-xsql-servlet</servlet-name>
<url-pattern>*.xsql</url-pattern>
</servlet-mapping>
I set classpath for XSQL related library such as oraclexsql.jar, xmlparserv2.jar,etc, I believe everything is setup correctly, however when I invoke .xsql page, I did not get data instead of getting sql text!, here is my xsql file content:
<?xml version="1.0"?>

<?xml-stylesheet type="text/xsl" href="Filter.xsl"?>
<page connection="reports_8i" xmlns:xsql="urn:oracle-xsql">
     <dataform target="reportFilter.jsp" submit="Go">
<xsql:set-session-param name="userid" value="{@userid}" ignore-empty-value="no"/>
     <xsql:include-param name="userid"/>
     <xsql:set-session-param name="bu_id" value="{@bu_id}" ignore-empty-value="no"/>
     <xsql:include-param name="bu_id"/>
     <xsql:set-session-param name="client_id" value="{@client_id}" ignore-empty-value="no"/>
     <xsql:include-param name="client_id"/>
     <item type="list" name="targetPage" label="Available Reports">
     <xsql:ref-cursor-function bind-params="userid">
               reports_generation.getReportList(?)
          </xsql:ref-cursor-function>
          </item>
     </dataform>
</page>
What I got when I invoked this page is reports_generation.getReportList(?)!!
It seems that JRun 3.1 did not understand xsql syntax, it means it can not find XSQL servlet related libraries, come on, I did set classpath.
Does anyone has this experience to help me out? Highly appreicate you in advance.
Thanks.

i think i solved this problem by specifying the full path to javac...
what must i do to avoid this?

The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU - SharePoint Foundation 2013

After sucessfulling installing the SharePoint Foundation 2013, when i try to access the Secure Stored Service Application i get the below error
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 Secure Store Service
Secure Store                  g0n6 High    The trial period for this product has expired or this feature is not supported in this SKU. b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       8nca Medium Application error when access /_admin/sssvc/ManageSSSvcApplication.aspx, Error=The
trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.   at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1
operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoi... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       8nca Medium ...nt.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs
e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.Office.Server.ProductExpiredException: The trial period for this product
has expired or Secure Store Shared Service is not supported for this SKU.    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)
at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoint.ClientExtensions.SecureSto... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
Runtime                       tkau Unexpected ...reAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       ajlz0 High    Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.ProductExpiredException: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()
at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy proxy, String& errorMessage)     at Microsoft.Office.Sha... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       ajlz0 High    ...rePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()
at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.Htt... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       ajlz0 High    ...pApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.86 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       aat87 Monitorable b3b6e19b-7de2-e016-ad32-0fc975829ef0
Is it a bug or any issue in configuration?
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

Hello
something should be related wuith this service, take a llok at my visual studio output whne I try to deplay and autohosted sharepoint app: (anyone can help)
1>------ Build started: Project: MySharePointAppWeb, Configuration: Debug Any CPU ------
1> MySharePointAppWeb -> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\bin\MySharePointAppWeb.dll
2>------ Build started: Project: MySharePointApp, Configuration: Debug Any CPU ------
2>C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config(34,4): warning : No element in the source document matches '/configuration/connectionStrings'
2> Transformed Web.config using C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config into obj\Debug\TransformWebConfig\transformed\Web.config.
2> Auto ConnectionString Transformed obj\Debug\TransformWebConfig\transformed\Web.config into obj\Debug\CSAutoParameterize\transformed\Web.config.
2> Copying all files to temporary location below for package/publish:
2> obj\Debug\Package\PackageTmp.
2> Packaging into C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.zip.
2> Adding sitemanifest (sitemanifest).
2> Adding IIS Application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Creating application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding virtual path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en\Microsoft.IdentityModel.resources.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.Extensions.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.Runtime.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.pdb).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\packages.config).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages\Default.aspx).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.min.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\_references.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Web.config).
2> Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding declared parameter 'IIS Web Application Name'.
2> Package "MySharePointApp.Web.zip" is successfully created as single file at the following location:
2> file:///C:/_works/visual%20studio%202012/Projects/MySharePointApp/MySharePointApp/obj/WebDeploy
2> To get the instructions on how to deploy the web package please visit the following link:
2> http://go.microsoft.com/fwlink/?LinkId=124618
2> Sample script for deploying this package is generated at the following location:
2> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.deploy.cmd
2> For this sample script, you can change the deploy parameters by changing the following file:
2> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.SetParameters.xml
2> Successfully created package at: C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\bin\Debug\app.publish\1.0.0.0\MySharePointApp.app
3>------ Deploy started: Project: MySharePointApp, Configuration: Debug Any CPU ------
3>Active Deployment Configuration: Deploy App for SharePoint
3>Uninstall app for SharePoint:
3> Skipping the uninstall step because the app for SharePoint is not installed on the server.
3>Install app for SharePoint:
3> Uploading the app for SharePoint...
3> Creating a trusted root authority in SharePoint for IIS Express.
3> Installation is in progress (00:00:00)
3> Installation is in progress (00:00:01)
3> Installation is in progress (00:00:02)
3> Installation is in progress (00:00:03)
3> Installation is in progress (00:00:05)
3> Installation is in progress (00:00:06)
3> App failed to install, cleaning up...
3> App installation cleanup failed due to errors. Please see the app on the SharePoint site’s “Site Contents” page for details.
3> App installation encountered the following errors:
3>
3> @"Error 1
3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
3>        ErrorDetail: The remote hosting service is not configured.
3>        ErrorType: Configuration
3>        ErrorTypeName: Configuration
3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
3>        Source: RemoteWebSite
3>        SourceName: Remote Web Site Deployment
3>
3> @"Error 2
3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
3>        ErrorDetail: The remote hosting service is not configured.
3>        ErrorType: Configuration
3>        ErrorTypeName: Configuration
3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
3>        Source: RemoteWebSite
3>        SourceName: Remote Web Site Deployment
3>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
========== Build: 2 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

Need a hint for home office / 871 does not support port-security - FPM ?

Hi,
i want to realize the following setup:
- Central Site 871 with Internet Connection and static IP
- Home office 871 with Internet Connection and static IP. On that home office router, there should be 2 Vlans: 1 for the office work and one for the user's private PC. All Traffic from the "office" Vlan is being put into a VPN to the central site. All Traffic on the other interface is being natted and goes straight to the internet.
To minimize security issues, i tried to configure port-security, so that the user cannot connect with his private PC to the office LAN ports and vice versa. Unfortunately, port-security seems not to be supported on the 871 (advanced ip services image).
Now i looked for an alternative...and came over to FPM (flexible packet matching).
If i understood right, you can classify packets for example by their source MAC address and if this field matches a specific value (the mac of the work pc), packets can be dropped by a policy.
Of course i cannot avoid that the user connects the work pc together with his private pc (this is then related to the OS Security to keep out viruses, worms, trojans, etc). But i could/want to restrict the internet access with the work pc through "normal" Internet access - the users should not be able to do that (must use the company's proxy).
I did the follwing config:
class-map type access-control match-any c2
match start l2-start offset 48 size 6 regex "0xabcd1234fedc"
match field ETHER source-mac regex "abcd1234fedc"
policy-map type access-control p2
class c2
drop
interface Vlan1
ip address 192.168.20.1 255.255.255.0
ip nat inside
ip virtual-reassembly
service-policy type access-control input p2
service-policy type access-control output p2
As this feature is quite new, i'm not familiar with it's syntax.
I also tried to use "string" instead of regexp, but i'm still able to connect the office pc to the private Lan and i am able to access the "Internet" (currently it's only setup in a lab).
As i understood so far, the offset is the value in bits, and size is in bytes. is that correct?
Has anyone yet some experience with FPM or maybe any hint for me how to realize the requested setup with the 871 routers?
bets regards,
Andy

For the FPM feature to work you will need PHDF files for the protocols you want to scan for to be loaded on your routers. The files can be downloaded from cisco's website. In your case you will have to download ether.phdf file.

XSQL servlet behave strange in Websphere 5.1 but not in Jboss/tomcat

Hi, we have been using XSQL Servlet (come with 9i) in jboss for a few years without any problem.
(The oracle database is 10g, but I don't think this is related since the XSQL use jdbc connection.)
Recently we try to migrate the app server to websphere app server 5.1 and the majority of xsql scripts work fine (still using the original xdk/xsql jars)
But for a few with xsql script using:
<xsql:include-request-params xmlns:xsql="urn:oracle-xsql"/>
it works for simple test xsql script with just this line at the very begining.
Then I switch to a more complicated xsql with other lines such as: update-request, delete-request, it throws exceptions all the time, and after that the simple test script also breaks.
Here is the exception in the xml returned:
<request>java.lang.NullPointerException at oracle.xml.xsql.XSQLHttpUtil.HttpRequestAsXMLDocument(XSQLHttpUtil.java:116) at oracle.xml.xsql.XSQLServletPageRequest.getRequestParamsAsXMLDocument(XSQLServletPageRequest.java:382) at oracle.xml.xsql.actions.XSQLIncludeRequestHandler.handleAction(XSQLIncludeRequestHandler.java:39) at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:149) at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:140) at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:60) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110) at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174) at com.ibm.ws.webcontainer.servlet.ServicingServletState.service(StrictLifecycleServlet.java:333) at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116) at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283) at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42) at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40) at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:974) at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:555) at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:200) at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:119) at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:276) at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71) at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:114) at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:186) at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334) at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56) at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:618) at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:439) at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)</request>
Could this be a bug?
Did anyone have a clue?
I also tried to use the xdk for 10g, but the library doesn't work with WAS 5.1 somehow, it complains about:
javax.xml.namespace.QName: method <init>(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)V not found
Really appreciate your help.
Kai.

The fact that XSQL servlet works in other containers suggests that this is WS problem, not the servlet problem. Probably some misimplementation of a deprecated method or something. What is exact version of XSQL servlet? Have you tried with the latest 9.2.0.9 production that comes with 9.2.0.7 db patch set? If you did and the error persists, does the error stack match the one posted (line numbers are of particular interest?)

The verification lists my card data and address etc. correctly but I need to keep entering the card security number. Support keep telling me to delete and re-enter my car info which does not help. Anyone else seen this issue? Seems to be something to do

The verification lists my card data and address etc. correctly but I need to keep entering the card security number.
Support keep telling me to delete and re-enter my car info which does not help. Anyone else seen this issue?
Seems to be something to do with a new security check they have put in the system that does not work correctly and support is totally incapable of helping me out.
wth am i gonna do im feed up and on top i have no one to help me been calling itunes for days now im ****** off to the maxxx

I've been jumping through the hoops with Apple Support on this issue....first time I called they said I should try updating from IOS 4.0 to 4.1....tried that and the issue still persisted...then I called back to update the ticket and get the next steps...they said that the Bank is rejecting the request for verification and that is why it keeps prompting (which doesn't make sense since the confirmation seems to go through successfully). The rep also contacted the iTunes dept and had them run the verify manually and said the bank rejected it. The next hoop they want me to jump through is calling the bank to verify that the account is in good standing and inquire about the rejected requests. I'm fairly certain the bank account is in good standing....will verify of course....but I find it hard to believe that all the people who have posted here, plus countless others that are experiencing the same issue but haven't, are ALL having banking issues in the last 24hrs...I'm more convinced there is a disconnect on the back end between iTunes and Financial institutions...
I'm not sure I buy in to everything I was told...he also told me he has had several calls on this issue and they were all told to check with their banks. He could not verify that any of his past calls were resolved. Needless to say I'm not 100% believing everything he told me....weak response from Apple support on this issue so far.

Secure SIP lines are not supported on the CME

Hi,
I was looking for the configuration of Secure SIP lines on the CME and found in the link bellow that "Secure SIP lines are not supported on the Cisco Unified CME mode", only Secure SCCP lines is supported:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeauth.html
In my opinion, security is an important subject nowadays and SIP is what Cisco is investing more and more ... it's awkward that Secure SIP lines is not supported on the CME.
Does anyone knows if this will be implemented in future versions of CME?
Thanks.

Just to described the answer that I received from Cisco ... there is a roadmap for FY16.
Regards.

I'm trying to download internet security and an error of microsoft windows applications are not supported on OS x keeps coming up

I'm trying to download internet security and an error of microsoft windows applications are not supported on OS x keeps coming up

That's because you must be trying to download a Windows application, and they do not run on a Mac unless you are running Windows on the Mac.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
For adware removal see The Safe Mac » Adware Removal Guide and The Safe Mac » Adware Removal Tool.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Secure zone - ERROR: The payment gateway that you are using does not support recurring payments

So I want to sell a product that is made up of 4 downloadable products. (Totalling ~ 200meg)
The only way I have found is to sell membership to a secure area where the files are linked.
When I create the secure zone, I want a one-time-fee, but the system says:
"ERROR: The payment gateway that you are using does not support recurring payments"
The payment isn't recurring!
Micah

"Note that you have to use seamless gateway to process such payments."
Right, but that's the problem, we're not usiong a seamless gateway and thus we get the error. Again, the system should note that we're doing a one-time charge and not throw the seamless gateway error.
Micah

Secure cookie not supported by XSQL Servlet

Similar Messages

Maybe you are looking for