Secure site (OWA) times out after 10 min.

I'm finding that Safari times out the session to OWA (Outlook Web Access) after about 10 minutes. The server side time out is set to 22 min.
Is this something that can be fixed? I see no 'idle time disconnect' prefs in Safari.
The PC's time out properly after 22 min.

I found two things that were causing my troubles.
First, port 25 on the switch going to the server was blocked. After this was opened I was able to receive mail to macosxserver02.binghamton.edu. Since this mail server is only used for Podcast Producer notifications, I'm hoping to have this port closed back down after I get Pcast Producer back up and running and fully tested.
Second, when the upgrade from 10.5 -> 10.6 was performed, in ServerAdmin>Mail>Settings>Domain Name, only the .binghamton.edu was populated in this field, not the full domain name of macosxserver02.binghamton.edu. This was preventing me sending mail to our Google branded .binghamton.edu email addresses. Apparently 10.6 was looking locally for all the .binghamton.edu email addresses.
A big thank you to Gordon for looking into this and helping me get this resolved.
Cheryl

Similar Messages

Aironet 1100 series web interface times out after few mins of inactivity

Hello,
I just upgraded an Aironet 1121G access point to IOS software version 12.3(8)JEC2 (file name: c1100-k9w7-tar.123-8.JEC2). I noticed that the HTTP web interface now times out after an inactivity of just a few minutes (dont have an exact number, but it times out between 2-4 mins of inactivity). Can this timeout period be changed..!? How? This wasnt happenning on the previous software version: 12.3(8)JEB1.
Also, where can I find the online help files for the latest Cisco IOS software? I cant seem to find it on the Cisco website!
Thanks much for all your help.. really appreciate it.

Does anyone have any idea on this..!? Its terrible having to login every couple of mins..!
Thanks :)

My regular FTP site suddenly times out - after onl...

Hi
Not sure if this is the right forum but due to some problems I found myself unable to pay the monthly bill by the due date. After some time going round in circles with the famous auomated menus I managed to find a real person and explained the problem. I asked if I ould have until 19th February to pay. They said the latest they could allow was 14 February UNLESS I was able to to pay £20 - £30 towards total of £51 before that.
I managed to borrow £20 which I paid online and I was still connected on the 14th and today too BUT my website FTP which I access daily has suddenly stopped connecting giving me a time out message. No one else using it has experienced any problem.
So I was wondering whether it was possible that BT have decided to block my access to this IP of this FTP site until the balance of the bill is paid. I have no evidence of this except the co-incidence that the last day they would originally give me to settle the bill coincides with the sudden inability to connect to my FTP site. (I can connect to other FTP sites that I use occasionally with different IP's with no problem.)
Any suggestions appreciated.
Solved!
Go to Solution.

Hi Shadowmike,
I don't think this issue has anything to do with BT billing restrictions. When your broadband is restricted due to payment issues you can not access any sites and you get redirected to a BT.com payment page.
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occationally. Can we stop Firefox from timing out?

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occasionally. Can we stop Firefox from timing out? edit

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

I just upgraded to Mavericks and find that I'm being logged out after 15 mins even though I have set security

I just upgraded my IMac to OS X MAVERICKS and find that I'm being prematurely logged out after 15 mins of inactivity even though my Privacy & Security settings are set to 1 hour. Any suggestions on how to correct this problem?

I just upgraded my IMac to OS X MAVERICKS and find that I'm being prematurely logged out after 15 mins of inactivity even though my Privacy & Security settings are set to 1 hour. Any suggestions on how to correct this problem?

Mountain Lion downloaded from App store will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! My Machine MacBook Pro OS 10.6.8 Processor 2.66Ghz i

Mountain Lion downloaded from App store on 11th and 12th June will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! Going around in circles!!
My Machine MacBook Pro OS 10.6.8
Processor 2.66Ghz i7,
4GB memory
128GB solid state drive
Purchased 2010

Thanks very much for the advice. I trawled through the other answers on the site and it appears others had the same issue. I doubled the available space and the install went like clockwork... which is what one would norma;ly expect from Apple :-)
Maybe Apple should have a ' definitely read me first' notice before a download takes place with CLEAR instructions to have more than the 6GB they indicate ofr the Mountain Lion download

When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off but i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half anhour - can anyone help?

Hi,
When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half an hour - can anyone help?
Thanks

Before beginning the download, try temporarily disabling the antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required and is running with that secure OS.

HT4356 What printers beside HP will work continuously with an i-pad? I tried Canon and Epson and both time-out after a short time, requiring the user to re-initialize. This defeats the idea of a wireless printer, Thanks Art

What printers besides Hp will work continuously with an i-pad? I tried Canon and Epson and both time-out after a short period of time rerquiring the user to re-initialize, which defeats the purpose of wireless printing. Please help, Apple can not. Thanks to all. Art

Canon support told me that the I-pad printer driver would not work with any printer, including HP. They offered to fix the problem for $50. I turned them down.
If they really could fix the problem, they must be saying to update the printers firmware. Look on the cannon website & update the priners firmware. While you at it, update the routers firmware.
What printer do you have?
List of supported AirPrinters.
http://support.apple.com/kb/HT4356

HT1218 after Lion update my airport get a time out every 3 min. and loos connection - how can i fix it?

Hej
After I updated to Lion OS my airport get time out and I loos connection al the time . can you help med to fix this problem?
Thanks

I turned on data roaming like you had said. Still didn't work. I tried calling the customer service support number with Verizon the other day. I was told by technical support to head over to a local Best Buy and have the reps at the Samsung Experience uninstall the updated software and install it again but on ground not over the network. I went and did that today and still nothing. I'm still on 3g. The rep was puzzled as to why my phone was on global network instead of the LTE/CDMA. I also performed a factory reset on my phone and still nothing. Its frustrating a bit because i specifically bought my Galaxy S5 with Verizon so i could be on 4G LTE and now i cant get it anymore. If Verizon cant seem to figure out my problem with my phone, is this covered under the warranty? I just bought my phone in may 2014.

Exchange 2013 issue / OWA time-out and WiFi/Cell problem.

Hi everybody,
I'm having some issues with an Exchange 2013 server.
When some users try to logon to the OWA page it keeps loading the page and ends with a time-out.
This only applies to 6 or 7 users, other users can login and open the page.
I tried to replace the signed certificate to solve this problem, and did a online analyzer check, most tests come out good.
I can't seem to find the source of this problem.
There are also multiple users that are having trouble to receive e-mail through the wifi on phones and tablets at home but when they switch to 3g it works fine.
You might need more information, just ask.. i don't know where to search anymore.
I tried inheritance on the AD, disabled SSL in the IIS, restarted the server, replaced the signed cert. etc.
Update:
I set the selfsigned cert in the IIS default web page,, to check if it responds to the certificate and it does, so the issue doesn't come from the certificate.
This issue probably came up after CU1, and i've read something about healthboxes..
I'm going to install CU6 and hope for good result.
Kind regards,
Tim

I've installed CU6, only one of the six users have gained access to OWA or ECP.
Al the other users won't get a logon screen, just a blank page.
So there is no option to insert a username or password to login, the page keeps loading and ends with "the page cannot be displayed"
But on my working spot i can open owa or ecp without any issues.
I've recreated the virtual directory for ECP and OWA with powershell, and checked the certificate.
I checked if the same certificate was connected to the back-end port 444, and this is set correct.
I even reconnected the cert on 444 with the following.
Open the Command Prompt
Run-
netsh http show sslcert
This will show the certs, copy and paste this information into notepad. Under IP:port : 127.0.0.1:443, note the certificate hash and application ID.
Run this command- (Yes, I know there is no :444 listed in the output from the earlier command.)
netsh http delete sslcert ipport=0.0.0.0:444
Run this command. Replace certhas with the certificate hash and appid with the application ID you saved in notepad.
netsh http add sslcert ipport=0.0.0.0:444 certhash=123123123123123 appid="{123123123123-1231231235}"
I used powershell to set the login authentication,
et-Owavirtualdirectory -identity "YourMailBoxServerName\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
set-Owavirtualdirectory -identity "YourCASserverName\owa (Default Web Site)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
and iisreset /noforce
I unchecked the "require SSL" on the default website and left it enabled on the owa and ecp etc.
Checked if HTTP over Proxy is installed, but this one is need to install exchange 2013.
I've checked all ECP/OWA directories in in the IIS, the directories point to the Exchange V15 folders, this should be correct.
Something is really broken, i really can use the help..
I'm going to try to install Exchange 2013 SP1, but i don't know if this one is needed when CU6 has been installed.
The strange thing is, it seem to be location based, not user based.
I can login perfectly, but when i try this at one of the employees, it ends up blank.
When i try to connect on a location dat does not work, at the exact time i press the enter-key to open the page, the eventviewer logs the following:
Event 4634 - An account was logged off.
For the issue on the smartphones and tablets, everything worked fine a few months ago, and happens to users on different ISP connections.
I already checked the inheritance settings on the users in the AD.
Kind regards,
Tim

IPad Browser seems to Disconnect/time out after Auto Lock

After iPad auto locks, it seems like the browser (Safari and Chrome have both been tested) disconnects or times out. When I unlock the iPad, the pages need to reload or re-establish a connection - and because of the apparent disconnect I am forced to log back into the web page I was on. How can I prevent this disconnect so I can utilize ipads easily in my office? It's so much easier than lugging around a laptop from client to client.
Background: I utilize a few iPads for my business. My EMR software is web based, which means I can use anything with a browser (ipad, laptop, desktop, etc) to log in and use the program. The program itself has an auto log off at 60 minutes, but on my iPads we don't make it that long. We will log into the web site, begin our day but need to set down the iPad when working with clients which can take 20 minutes or more. Our iPads auto lock for security reasons. When we unlock the iPads to continue working, the browser has to, essentially, re-establish a connection to the site - so it is not maintaining an active connection in that browser. The only thing I have found that helps is disabling the auto lock but that is unacceptable as a long term solution.
It's not the program or the programs site - my laptops work fine as long as I disable hibernation. If it were my network, both laptops and ipads would have the same issue when the wifi signal was lost. What's more, it will happen on other pages - like my bank site or even shopping.
So how can I keep the browser's connection active even when auto locked?
Thanks!

Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

HT1918 I can't get into my account in iTunes using my ID and password -the session times out after trying to Review and I choose United States as country of origin-- have tried six times and same thong happens. Just want to verify if/which card is being

I can't find out if there is a credit card already attached to my apple ID and password. Every time I go into iTunes, as apple instructs me to do, I can't get into "Review", as it "times out" right after choosing the "united States" for the country of origin. Every time. All seven times now. I received this phone as a gift from my wife and she can't remember if there was a credit card put on file, but thinks there was, since she's pretty sure they wouldn't let her set up the apple account for the new phone without it. You would think that this should be easy to find with my ID and password and security info and all, but after almost an hour, we are at our wit's end!! Please help!!! THANK YOU!!!

I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3

Automatic log out after 60 min inactivity

Is it possible to increase time for the system log out after inactivity of 60 minutes?
In other cloud solutions it is possible via adapt mode to change it
(15 min, 25 min, 1 hour, 2 hours, 4 hours)
Thanks in advance,
André

Hi Angi,
thanks a lot. It is working fine.
Regards,
André

Internet time-outs after installing 10.6.X from 10.5.X

Hi,
I had no problems with my internet on system 10.5.8, everything was working fine, but after installing 10.6.1 I have some problems with my internet connection, only on my MBP17. On other computers on my network, internet is working fine.
The problem is, I have some time-outs when I use firefox or safari randomly.
Then after a sec or 10sec, internet is working fine until the next time-out.
What can I do? there are no updates.

northsoca wrote:
Try using DHCP and no DNS Entry. So far so good. Please post your results.
The above, from northsoca, may be a solution.
My laptop is running 10.5.8 and has no problems with drop outs. When I looked at the network preferences (Ethernet>Advanced) The DNS Servers is empty, Search Domains is empty.
Looking at the network preferences on my iMac The DNS Servers are 10.1.1.1 and the Search Domain contains (grayed out) "domain.invalid"
10.1.1.1 is my Siemens SpeedStream 4200 modem management site (the modem has not had a firmware update in 3-4 years).
These will be my next steps, to delete the entries in the network preferences and update the firmware for the modem. Actually I think I'll go out and buy a new modem.
P.S. I am currently trying a new cable that has given me a one hour connection, when I have been getting drop outs every 19mins and 49secs.
Message was edited by: Dasher

API App times out after 1 minute in Logic Apps

Hi,
My API app is timing out after 1 minute when ran in a Logic app. Is there a way to set timeout? better yet, any async model would be nice here.
thanks,
Paul

Apps crashing
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Secure site (OWA) times out after 10 min.

Similar Messages

Maybe you are looking for