Internet time-outs after installing 10.6.X from 10.5.X

Hi,
I had no problems with my internet on system 10.5.8, everything was working fine, but after installing 10.6.1 I have some problems with my internet connection, only on my MBP17. On other computers on my network, internet is working fine.
The problem is, I have some time-outs when I use firefox or safari randomly.
Then after a sec or 10sec, internet is working fine until the next time-out.
What can I do? there are no updates.

northsoca wrote:
Try using DHCP and no DNS Entry. So far so good. Please post your results.
The above, from northsoca, may be a solution.
My laptop is running 10.5.8 and has no problems with drop outs. When I looked at the network preferences (Ethernet>Advanced) The DNS Servers is empty, Search Domains is empty.
Looking at the network preferences on my iMac The DNS Servers are 10.1.1.1 and the Search Domain contains (grayed out) "domain.invalid"
10.1.1.1 is my Siemens SpeedStream 4200 modem management site (the modem has not had a firmware update in 3-4 years).
These will be my next steps, to delete the entries in the network preferences and update the firmware for the modem. Actually I think I'll go out and buy a new modem.
P.S. I am currently trying a new cable that has given me a one hour connection, when I have been getting drop outs every 19mins and 49secs.
Message was edited by: Dasher

Similar Messages

  • Mountain Lion downloaded from App store will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! My Machine MacBook Pro  OS 10.6.8   Processor 2.66Ghz i

    Mountain Lion downloaded from App store on 11th and 12th June will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! Going around in circles!!
    My Machine MacBook Pro  OS 10.6.8  
    Processor 2.66Ghz i7,
    4GB memory
    128GB solid state drive
    Purchased 2010

    Thanks very much for the advice. I trawled through the other answers on the site and it appears others had the same issue. I doubled the available space and the install went like clockwork... which is what one would norma;ly expect from Apple :-)
    Maybe Apple should have a ' definitely read me first' notice before a download takes place with CLEAR instructions to have more than the 6GB they indicate ofr the Mountain Lion download

  • A friend can't update her iPad (1) as it times out after 12 Hours.  What would happen if she uses my pc with a faster Internet?  Will my iTunes, syncing etc get messed up with hers?

    A friend can't update her iPad (1) operating system as it keeps telling her to do, as her Internet timed out after 12 hours.  Can we use my PC with a fast Internet or will that mess up my iTunes, syncing etc?  Should she just find an apple store?

    - She can try disabling the the security software on here computer during the download and update.
    - Update the iPad on your computer will not mess up yur computer or iPad. However, she will then have to restore the iPad on her computer if she want to sync to that computer. Also, unless all the media is on your computer it will not be on her computer after the update.

  • Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occationally. Can we stop Firefox from timing out?

    Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occasionally. Can we stop Firefox from timing out? edit

    Quote from: lcwhitlock on 04-April-14, 13:44:09
    Hello darkhawk,
    Thank you for the recommendation.  I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one  - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
    Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
    If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
    http://www.hiren.info/pages/bootcd
    Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

  • HT4356 What printers beside HP will work continuously with an i-pad?  I tried Canon and Epson and both time-out after a short time, requiring the user to re-initialize.  This defeats the idea of a wireless printer,  Thanks Art

    What printers besides Hp will work continuously with an i-pad?  I tried Canon and Epson and both time-out after a short period of time rerquiring the user to re-initialize, which defeats the purpose of wireless printing.  Please help, Apple can not.  Thanks to all.  Art

    Canon support told me that the I-pad printer driver would not work with any printer, including HP.  They offered to fix the problem for $50.  I turned them down.
    If they really could fix the problem, they must be saying to update the printers firmware. Look on the cannon website & update the priners firmware.  While you at it, update the routers firmware.
    What printer do you have?
    List of supported AirPrinters.
    http://support.apple.com/kb/HT4356

  • Aironet 1100 series web interface times out after few mins of inactivity

    Hello,
    I just upgraded an Aironet 1121G access point to IOS software version 12.3(8)JEC2 (file name: c1100-k9w7-tar.123-8.JEC2). I noticed that the HTTP web interface now times out after an inactivity of just a few minutes (dont have an exact number, but it times out between 2-4 mins of inactivity). Can this timeout period be changed..!? How? This wasnt happenning on the previous software version: 12.3(8)JEB1.
    Also, where can I find the online help files for the latest Cisco IOS software? I cant seem to find it on the Cisco website!
    Thanks much for all your help.. really appreciate it.

    Does anyone have any idea on this..!? Its terrible having to login every couple of mins..!
    Thanks :)

  • When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off but i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half anhour - can anyone help?

    Hi,
    When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half an hour - can anyone help?
    Thanks

    Before beginning the download, try temporarily disabling the antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required and is running with that secure OS.

  • After installing premiere elements 11 from dvd with serial nr.install is interrupted and uninstalled

    after installing premiere elements 11 from dvd with serial nr.install is interrupted and uninstalled. what to do?

    troubleshoot the installation, http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

  • HT1918 I can't get into my account in iTunes using my ID and password -the session times out after trying to Review and I choose United States as country of origin-- have tried six times and same thong happens.  Just want to verify if/which card is being

    I can't find out if there is a credit card already attached to my apple ID and password.  Every time I go into iTunes, as apple instructs me to do, I can't get into "Review", as it "times out" right after choosing the "united States" for the country of origin.  Every time.  All seven times now.  I received this phone as a gift from my wife and she can't remember if there was a credit card put on file, but thinks there was, since she's pretty sure they wouldn't let her set up the apple account for the new phone without it.  You would think that this should be easy to find with my ID and password and security info and all, but after almost an hour, we are at our wit's end!!   Please help!!!  THANK YOU!!!

    I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
    iPhone 5s, iOS 8.3

  • BPEL process times out after 5 minutes

    Hi,
    I have created a BPEL Asynchronous process that is invoking a view which takes time to give all the records; while the process is invoking this database adapter, my process abruptly ends with the following fault after 5 minutes
    Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CAMPAIGN_BATCH_COUPONS_VSelect' failed due to: DBReadInteractionSpec Execute Failed Exception. Query name: [CAMPAIGN_BATCH_COUPONS_VSelect], Descriptor name: [CAMPAIGN_BATCH_COUPONS_V.WcCampaignBatchCouponsV]. Caused by java.sql.SQLTimeoutException: ORA-01013: user requested cancel of current operation . See root exception for the specific exception. This exception is considered retriable, likely due to a communication failure. Because the global transaction is rolling back the invoke must be retried in a new transaction, restarting from the place of the last transaction commit. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "1013" to your deployment descriptor (i.e. weblogic-ra.xml). ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    It looks like my process is timed out. Is there anything that I can do for it to not time out like this?
    Can anybody please help me on this?
    Thanks in advance.
    Edited by: user1165407 on Sep 6, 2011 4:19 PM

    Hi Naresh,
    Before the transaction was rollback issue it got failed while invoking the DBAdapter and it is showing the below issue:
    Can you please look into this and let me know if any thing required and we pass the payload by standalonely through EM Console it is working fine.But normal order processing it is showing the below error.
    Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'update' failed due to: DBWriteInteractionSpec Execute Failed Exception. update failed. Descriptor name: [insertSiebelOrder.OeSblOrders]. Caused by java.sql.BatchUpdateException: ORA-01013: user requested cancel of current operation . Please see the logs for the full DBAdapter logging output prior to this exception. This exception is considered retriable, likely due to a communication failure. Because the global transaction is rolling back the invoke must be retried in a new transaction, restarting from the place of the last transaction commit. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "1013" to your deployment descriptor (i.e. weblogic-ra.xml). ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    Let me know if any thing required.
    Regards,
    Raj.

  • Transaction time out after 300 seconds..

    Hi guys,
    I have very intersting problem. I get transaction time out exception after 300 seconds. I use WLP8.1 SP3. I get this when I try to add a new portlet using admin tool
    to home page (which is customized by many users)
    Here is the error msg:
    <weblogic> <> <BEA-415037> <PortalAdminInstanceManager.addPlaceableToPageInstance() -- java.rmi.RemoteException: EJB Exception: ; nested exception is:
    javax.ejb.EJBException: SQL Error while trying to getLayoutDefinition on 2004: SQL [select LAY.MARKUP_DEFINITION_ID, LAY.INTERSECTION_ID, PL.PLACEHOLDER_DEFINITION_ID, PL.MARKUP_DEFINITION_ID, PL.LAYOUT_LOCATION, PL.INTERSECTION_ID, LAY.ICON_URI, LAY.HTML_LAYOUT_URI, LAY.WEBAPP_NAME, LAY.LAYOUT_FILE, LAY.IS_LAYOUT_FILE_DELETED from PF_LAYOUT_DEFINITION LAY, PF_PLACEHOLDER_DEFINITION PL where LAY.LAYOUT_DEFINITION_ID = ? and PL.LAYOUT_DEFINITION_ID = LAY.LAYOUT_DEFINITION_ID] database error code [0] SQL state [null] 040.; nested exception is: java.sql.SQLException: The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.TimedOutException: Transaction timed out after 299 seconds
    Name=[EJB                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi guys,
    I have very intersting problem. I get transaction time out exception after 300 seconds. I use WLP8.1 SP3. I get this when I try to add a new portlet using admin tool
    to home page (which is customized by many users)
    Here is the error msg:
    <weblogic> <> <BEA-415037> <PortalAdminInstanceManager.addPlaceableToPageInstance() -- java.rmi.RemoteException: EJB Exception: ; nested exception is:
    javax.ejb.EJBException: SQL Error while trying to getLayoutDefinition on 2004: SQL [select LAY.MARKUP_DEFINITION_ID, LAY.INTERSECTION_ID, PL.PLACEHOLDER_DEFINITION_ID, PL.MARKUP_DEFINITION_ID, PL.LAYOUT_LOCATION, PL.INTERSECTION_ID, LAY.ICON_URI, LAY.HTML_LAYOUT_URI, LAY.WEBAPP_NAME, LAY.LAYOUT_FILE, LAY.IS_LAYOUT_FILE_DELETED from PF_LAYOUT_DEFINITION LAY, PF_PLACEHOLDER_DEFINITION PL where LAY.LAYOUT_DEFINITION_ID = ? and PL.LAYOUT_DEFINITION_ID = LAY.LAYOUT_DEFINITION_ID] database error code [0] SQL state [null] 040.; nested exception is: java.sql.SQLException: The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.TimedOutException: Transaction timed out after 299 seconds
    Name=[EJB                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • My Foscam IP Camera "times out" after one day - the IP address changes

    Hey All,
    I'm trying to set up my Foscam 8918 camera.  I'm not so much concerened about being able to view it remotely as i can't even get the local (home) setup to work successfully for more than a day. 
    As far as I undertand it my IP address is dynamic and changes every day and I have to manually go into the foscam app and change the Local Camera Address 10.0.1.XX
    Is there a way I can give the camera a static IP address?  I've tried the port forwarding as instructed on this forum and I can't get it to connect. 
    Everything works until the IP address changes and then the camera times out. 
    Thanks for any insight. 
    I'm using the brand new apple router (the tower)
    I'm using FoscamPro app on iphone 4S and ipad 2

    In case you do want to be able to access your Foscam IP camera from the Internet. Note: I don't have this exact camera model, but the following worked for mine.
    Camera Setup Part 1
    Plug the camera into your router with your ethernet cable
    Log onto the camera using the IP address given by the IP camera tool (IPCT) using the default login given on the bottom of the camera.
    Choose Device Management, and then, Wireless LAN Settings.
    Find your wireless network and input the login info.
    The camera should now reset
    802.11n AirPort Extreme (AEBSn) Setup (Note: I am assuming that you will be using version 6.x of the AirPort Utility from the iPad.)
    Start the AirPort Utility > Select the (AEBSn) > Edit > Advanced > DHCP and NAT
    Verify that the Router Mode = DHCP and NAT
    From the DHCP and NAT window > Reservations > New Reservation...
    Enter anything you like for the Description field.
    Reserve address by: MAC Address
    MAC Address: Enter the wireless MAC address of the IP camera
    IPv4 Address: Enter the desired IP address you want reserved as a "Static IP" address for the camera. This address must be within the DHCP range of your AirPort. By default, this range is: 10.0.1.2 - 10.0.1.200.
    Click Done
    Go to the Advanced window > Port Settings > New Entry...
    Entry Type: IPv4
    Description: Leave blank or enter a desired description.
    Public UDP Port(s): 8888
    Public TCP Port(s): 8888
    Private IP Address: Enter the Static IP address you created above.
    Private UDP Port(s): 8888
    Private TCP Port(s): 8888
    Click Done
    Allow the AEBSn to reset.
    Camera Setup Part 2
    Use the IPCT utility to obtain the network configuration settings.
    Right (or Option)-click the IP address given in IPCT and choose Network Configuration.
    Note these values. You may want to write them down.
    Log onto the camera via a web browser, like Safari.
    Go to Device Management > Basic Network Settings
    Uncheck the box.
    Input the settings from IPCT.
    Verify that the port numbers used are the same as what you entered in the AirPort Utility's Port Mapping option.
    Allow the camera to reset.
    Optional, but recommended
    Setup a Dynamic DNS account. This would take care of the issue of having a Dynamic WAN IP address that your ISP provides you. I would recommend DynDNS.
    Go to  https://www.dyndns.com/account/services/hosts/add.html
    You will want to just set up a basic account.ollow the directions for setting up a basic account.
    Once the account is set up, you will want to choose a web address to map directly to your camera. The Dynamic DNS service will assign a web address that will link to your Dynamic WAN IP address. The web address will stay the same even if the IP address changes.
    When accessing the camera from a remote location, just tag on the port number to the web address. As as example, if the web address DynDNS assigns you is: www.myaddress.com, you would enter: www.myaddress.com:8888 into the web browser's address bar to access your camera.
    Your camera should now be ready for both wireless access on your local network and from the Internet.

  • Internet not working after installing "StarTech Thunderbolt Docking Station" driver

    My Internet is not working after installing "StarTech Thunderbolt Docking Station" driver although "Ethernet" and "wireless" say they're connected, still there is no internet.
    I have bought a "StarTech Thunderbolt Docking Station" as I need to use 2 thunderbolt based pieces of equipment on my "MacBook Pro"; which are a 2nd monitor as well as a Thunderbolt driven Audio Interface.
    When I first plugged all my equipment to the "StarTech Thunderbolt Docking Station" everything was working fine, all pieces of equipment worked as well as Ethernet from both the computer and the docking station were working perfectly.
    However, when I inserted the "StarTech Thunderbolt Docking Station driver CD" and installed the drivers, the internet on my computer has stopped working. Although the Ethernet says it is "connected" (same goes for "Thunderbolt Ethernet" when cable is connected to it) still the internet does not work. Even my wireless internet is not working anymore. Furthermore, also after installing the Docking Station drivers, my iTunes is crashing whenever started.
    Please help, this is really urgent.
    I've been looking for answers all around but can't seem to find any.
    I'm using OSX Mavericks 10.9.2
    I've tried fixing stuff with Network preferences, like changing IP address, renewing DHCP leace.
    I also tried typing IP address, Subnet Mask, Router and DNS Sever manually... Nothing seems to be working.
    Note: I know someone could suggest to "uninstall" the Thunderbolt Station driver, however, I can't find an "uninstallation file", even the CD that came with the docking station does not have it.

    I had exactly the same problem today, and I was lucky enough to solve it.
    Here's what helped me:
    First, I found a hint to Suspicious Package in this thread.
    With Suspicious Package installed, I was able to identify the script in StarTech's installer pkg. It' called "postflight".
    Amongst other things, postflight runs this command:
    sudo mv usr/share/sandbox/mDNSResponder.sb usr/share/sandbox/_mDNSResponder.sb
    A quick check in Apple's knowledge base revealed, that the mDNSResponder is essential to use DNS (i.e. to resolve server names like www.apple.com) and bonjour.
    I moved th mDNSResponder back to where it belongs:
    sudo mv usr/share/sandbox/_mDNSResponder.sb usr/share/sandbox/mDNSResponder.sb
    After a reboot, everything worked fine again.
    I have no idea, why StarTeck disables an essential tool. Let's assume it's an error ...
    But after this experience, I didn't want the StarTech ethernet driver on my machine (I had installed it just for curiosity, anyway - yes, I know, I shouldn't have ...), so I removed the kext the installer had copied to my system:
    sudo mv /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8 2580.kext /Users/myusername
    (You see I didn't delete the kext directly, I just moved it away and tried another reboot. Now everything works fine, so I'm going to delete the kext entirely and paint a big red cross on StarTech's installer disk.
    Hope this helps.

  • Secure site (OWA) times out after 10 min.

    I'm finding that Safari times out the session to OWA (Outlook Web Access) after about 10 minutes. The server side time out is set to 22 min.
    Is this something that can be fixed? I see no 'idle time disconnect' prefs in Safari.
    The PC's time out properly after 22 min.

    I found two things that were causing my troubles.
    First, port 25 on the switch going to the server was blocked. After this was opened I was able to receive mail to macosxserver02.binghamton.edu. Since this mail server is only used for Podcast Producer notifications, I'm hoping to have this port closed back down after I get Pcast Producer back up and running and fully tested.
    Second, when the upgrade from 10.5 -> 10.6 was performed, in ServerAdmin>Mail>Settings>Domain Name, only the .binghamton.edu was populated in this field, not the full domain name of macosxserver02.binghamton.edu. This was preventing me sending mail to our Google branded .binghamton.edu email addresses. Apparently 10.6 was looking locally for all the .binghamton.edu email addresses.
    A big thank you to Gordon for looking into this and helping me get this resolved.
    Cheryl

  • ITunes Download Times out after 6.8 MB transfer

    i keep trying to download itunes but it times out i tried 64 bit and 32 bit for windows seven but it wont finish internet connection is fine and computer is fine it downloads other large files... HEEEEEELP!!!!

    What web browser are you using for the download, Ltoko? Does it make any difference if you use IE (say) rather than Firefox, or vice versa?

Maybe you are looking for