Security deposit contract creation

Hi Gurus,
while  creating security deposti contract(z001 contract type) it asking contract number to enter even though we have given internal number range.
We have implemented EHP5.I am testing in quality.
we given internal number range in contract number range.
Please help on this.
Thanks
Regards
Sasikanth.

Hi Srini,
The following error it is displaying while creating security deposit contract..
"Secur.Deposit Contract" not allowed for security on contracts of type "License Agreement-Retail"
I entered the main contract..its showing above error.
Can you please help on this..
Thanks
regards
Sasikanth.

Similar Messages

  • RE-FX Internal contracts and security deposit contracts

    Hi All
    Please let me know the purpose of creating internal contracts and security deposit contracts and their diff with normal contract. in ecc6.0.
    Regards
    shantanu

    Hi
    Thanks for reply.
    how to settle cost between two department in internal contract? through rerapp?
    suppose there are two department(A and B)  and A wants to transfer cost to B because this cost does not belongs to A.
    and A has already post entry exps dr
                                                         to vendor.....
    now through internal contract A wants to .post .above exps as income
    B   Dr.
    to expenses...
    Is above scenario is correct.?
    Regards
    shantanu

  • Creation of Security Deposit while Dunning.

    Hi All,
    Has anyone come across creation of Security Deposit with FM ' FKK_S_SECURITY_CREATE' or 'FKK_S_CASH_SEC_REQUEST_CREATE' while dunning.
    Here the problem is when Dunning triggers the activity where security deposit is created, before this  a FM 'FKK_CREATE_DOC_MASS_START' is triggered as dunning is a mass activity and the field MEM_XSTAR value is changed to 'X'. Inside this standard FM for creating security deposit, FKK_POST_SECURITY_WITH_TAX creates the document(opbel) for repective SD but as MEM_XSTAR is checked as 'X' it doesnot allow the creation of the document which inturn doesnot create a security deposit.
    Can there be way out where this SD will be created.

    As long as you are using standard FM ISU_CREATE_NEW_SEC_REQ_0350, then you should be okay.  If not, then you should look at that FM to see where your custom FM is not coded properly.
    regards,
    bill.

  • Downpayment Request and Security Deposit

    Hi Experts,
    My scenario is to create a downpayment request, make a payment and it should get cleared with the actual receivables.I created a Down payment request through Manual posting.Did the payment for the same. But during my final bill it doesnt get cleared with my actual receivables. I have done the required configuration for Down payments in posting area 1010 with 3000/0010 alongwith clearing restriction '5' and also maiantained them in SAP Utilities -> Invoice Processing -> Item Selection in Account Maintainence as well as Bill printout but unable to acheive the same.
    Moreover, I checked my Security deposit also. It is getting cleared but still remaining as a down payment item. Event R401 is also active.
    Any help would be appreciated.
    Thanks in anticipation.
    Richa Tyagi

    Hi,
    Also check the Clearing configuring for invoicing has the Account Maintenance Clearing Variant defined:
    Contract Accounts Receivable and Payable ->Basic Functions ->Open Item Management.->Clearing Control->Define Specifications for Clearing Types->Define Specifications for IS-U Invoicing
    Ensure that the Final Billing Clearing Types R42 and R43 are assigned the Account Maintenance Clearing Variant.
    In addtion, extend the Interval Days in Item Selection in Invoicing to be 999 days. While Due dates should not matter for credits, some functionality respects the due date.
    If all this fails, make sure your Event R401 is not bypassing any standard logic that is contained with the IS-U standard Event ISU_EVENT_R401.
    Also, make sure that your account is not a multi-contract account. There are dependencies during Move-out/Final bill for Security Deposits the Release can occur only if all contracts are moved out.
    Regards,
    Ivor M.

  • Security Deposit

    I am trying to post a cash security deposit from transaction FPSEC1 and getting the error "Document header does not have a reconciliation key".But I don't see any reconciliation key field in the screen.
    Can anyone tell me how to solve this problem.
    Thanks,
    Banasri Mitra

    Hi
    1)for the below path give the three char by which recon key has to be generated..by which used ID ur logging in.
    Financial accounting -> Contract accounts receivables and payable -> Basic functions -> Posting and documents -> Document -> Define default values -> Maintain Reconciliation Groups for Default Values
    check weather the origin 13 - cash security deposit included or not.
    Financial accounting -> Contract accounts receivables and payable -> Basic functions -> Posting and documents -> Document -> Define default values ->Origin Keys with User-Dependent Default Values
    Sree

  • Security Deposit Replication

    Dear experts,
    In our scenario (CRM 5.0 integrated with ERP 2005), we have to create the security deposit in CRM. The security deposit must be replicated to R3 when the CRM contract is replicated to the backend.
    When I was reading the ERP2005 release notes there was a section 1.9.1 Enhancements to the master data generator that included the submodule MOVE_IN_SEC.  Using the installation field ANLAGE you can associate a security deposit exemption (SECWAIVERAS)  or a security deposit amount and reason it was requested (SEC_TOT_AMOUNT  and SEC_REASON).
    Do you know where I can capture these fields in CRM in order to populate the correct values in the MDT?
    Thanks in advance for your help,
    Best regards,
    Stephanie

    Hi Stephanie,
                      Did you ever find out these fields in CRM ? I'm facing the same problem.
    Cheers,
    Perzad Avari

  • Security Deposit $400

    I've been in contract with verizon about a year or so.
    I'm wondering how am I going to get security deposit and what kind of form does it come through. Does it come through mail?
    Is that the only way to get it? If mail was returned because I was out of country, am I losing the deposit?
    I hope they can tell me when can I get the deposit back:(

    You should get it in the form of a check. Also you only get it back after a year if you've paid your bill in full and on time every month. If not it'll be another 3 months

  • Security Deposit to A/R

    Dear Guru:
    I created Security Deposit and activate.
    I would like to create open item in A/R from security deposit.
    but when I run RERAPP , said  "Flow type for postings is missing in payment-related cash flow Message no. RERAPP007"
    so if I have security deposit , do I need to create open item in A/R and do cash receipt?
    Pls advise.
    Thx in advance.

    Hello  Franz Posch,
    Even though I choose the Actual Rent for contract, I still get the same error:
    Flow type for postings is missing in payment-related cash flow
    Message no. RERAPP007
    I have searched in internet and found that a lot of people face the same error, but there is no solution.
    Do you have any idea?
    Huong

  • Security Deposit Interest and Withholding tax_ Query

    Hi Experts
    I have raised a security deposit request and received payment against it. Interest on the cash security deposit was also calculated and it was also posted to contract account subject to Withholding tax assigned to it.
    Now, i want to know from which tables will i be able to access the amount of Security deposit paid by the consumer, the amount of interest calculated on that Secuirty deposit and the amount of withholding tax on that interest?
    Thanks in Advance.
    Regards
    Anwesha.

    Hi Anwesha,
    There are multiple tables where you can access the data releted to security deposits and the interest calculated against them.
    FKK_SEC
    FKK_SEC_REQ
    Take the document no. from the above tables and go to DFKKOP, you will be able to find the payment amount (if any) against the SD line item in the clearing section.
    Table DFKKIAPT will give you the interest information for the security deposit.
    Take the interest document no. and go to DFKKOP to find out the With holding tax amount (Field-QBSHB).
    Hope it clarifies.
    Thanks,
    Amlan

  • Security deposit transfer during move-in

    Hi All,
    My requirement is to transfer security deposit automatically during move-in/move -out from EC60.I can transfer the same from FP40 , but I want to transfer this automatically through EC60.
    In move-in control parameter , I have already set the automatic transfer of SD in configuration.What else I need to do for this?
    Also before transfer through FP40 , I need to release the same and the SD will be transferred to new contract account without any restriction.If I want to place the restriction again, what I need to do?

    Banasri:
    using the move control parameters, you will be able to control the deposit transfer automatically when the move in/out occurs.  The contract on the original deposit (request and/or payment) will be updated to the new contract.
    regards,
    bill.

  • Security Deposit Clearing

    Hi Experts,
    In our project we have the requirement that Security Deposit will be posted at contract account level , but payments may come with reference to Contract and even then the payment should clear the SD on priority basis.
    In standard I have checked that if payment is posted with reference to contract then SD is not getting cleared as it is posted at contract account level.
    Can you pls advise whether this is possible through standard config or enhancement is required for this.
    Thanks,
    Banasri Mitra

    Hi,
    I dont think your requirement is possible by standard configuration settings.
    However, going thru your post, wht I could gather is that any payment coming will clear the SD line item first.
    So in that scenario, make a seperate clearing variant for SD, you can use the main tr for grp characteristic.
    Now in the grp rule, plug in a custom FM using clearing rule 8,
    In the custom FM, write the logic that, if any payment is coming against the contract and an open SD line item exist at the CA level, then retrieve the contract account for the same and clear the debt at the contract account level.
    Hope it helps....
    Thanks,
    Amlan

  • Security deposit return date

    Hello everyone,
    I would like to know that in security deposit what is the relation between start date date and return date and also how return date is moved accordingly with start date ?
    Can any one guide me on these queries..??
    Best Regards,
    Shruti

    Shruti:
    The start date for a cash security is initialy populated at creation but is updated at time of payment (this setting can be turned off in configuration).  This field is meant to identify the date at which the deposit was received.
    The return date is also populated at creation.  Posting area 0800 controls the default value for the return date population.  The return date, having been set, can now be used in automatic deposit monitoring to determine when a deposit might be released/returned to the customer.
    regards,
    bill.

  • Tax calculation in Security deposit Agreement

    Hi All,
    While I am running the postings for Security deposit agreement commercial lease In. the tax is being calculated for the security deposit the tax has to be exempted while posting.
    Experts please post any solution.
    Regards,
    Arjun.

    Hi Arjun,
    Hope you have not maintained any taxable tax code in the security deposit line item in the Lease in contract. If it is a required field, you may need to define/use appropriate tax code (for No tax).
    Hope it helps.
    Thx
    Saroj

  • Security deposit transfer

    Dear Friends,
    Is it possible to transfer Cash security deposit from a Business partner/contract account  to another Business partner/contract account? How do we do it?
    By using FP40, we can transfer only open items of a BP to  another.
    Kindly advise on this matter.
    Thanks in advance.
    Rajesh

    RAjesh,
    Check the config in below mentioned path
    FA> CARAP> Business Transaction> Transfer> Define specification & default value for transfer
    Maintain value "X" for Transfer Credit. By activating this field the open cash security payment can be transferred i.e credit item can be transferred by FP40.
    Also check field Only open item, whether activating the field can help you as per your client requirements.
    Regards

  • Return date of Security Deposit blank on move out bill

    Dear All,
    When a move out is done on a contract account, if no final bill is issued, the security deposit is released and the return date of the security deposit is filled with the move out date. Else if a final invoice is issued, the the security deposit is released but the return date remains blank.
    Is there some special configuration to be done so that the return date is populated in both cases.
    I am actually working on a statistics report for security deposits, FPD1 gives only summary and FPD2 is limited by BP or Contract Account. No dates or status available to restrict the search.
    Thanks and Regards
    Malini

    Note 1089152 corrects this problem

Maybe you are looking for