Security prompt

so we're trying to run a .bat file across the network and we get the annoying prompt, "we can not verify the file. Do you still want to run this file"
we do this from the dfsn path \\domain.local\share\share
using policy I add file://*.domain.local to my intranet zone
did not change anything
however if I right click and run as administrator it does not prompt. However most our users are not admins.
Note: UNC is also set to never.
Now I know that it is not best practice to disable this prompt but real world is that 100% of the time users say "open" anyway and it is only done from the Intranet zone.
Is there a group policy to turn off this security warning prompt? I gets lots of complains.
Thanks

> we do this from the dfsn path \\domain.local\share\share
> using policy I add file://*.domain.local to my intranet zone
You need to add "domain.local" :) The "*.domain.local" denotes that
there HAS to be a host part in front of the domain name, wich for DFSN
is not the case.
And make sure the file doesn't have an alternate data stream that
identifies it as "Internet"...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

  • Windows Security Prompt in Internet Explorer 10 on Sharepoint Foundation 2013 site

    Hi,
    I have Sharepoint Foundation 2013 and when I access the site from Internet Explorer 10 I get prompted for windows security, after enter my domain credential I am able to log into the site.  When I access the site from Internet Explorer 9 I don't
    receive the windows security prompt.  Below you will find screenshot.  How can I prevent Internet Explorer 10 and later to not prompt for domain credential?
    Thanks

    Add *.domain.com to the Intranet Zone in IE.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Silent Print and Annoying Printing Security Prompt

    Hello all,
    I finally managed to get my silent print JavaScript to work but I can’t figure out how to get rid of the annoying security prompt "This document is trying to print. Do you want to allow this?". I tried adding the JavaScript folder to the trusted sites under Security (Enhanced) but I am still being nagged with this prompt. Is this feature only for PDF files or can it be used for JavaScript files? I added a button so the user can just click and the PDF document will save in a specified location using PDFCreator. Yes, I know it is strange that I am printing a PDF file to a PDF but I have my reasons. Is it possible to get rid of this message or am I going to have to put up with it. Here is my code:
    function silentprint()
    var pp = this.getPrintParams();
    pp.interactive = pp.constants.interactionLevel.silent;
    pp.printerName = 'PDFCreator';
    this.print(pp);
    function toolbar()
    app.beginPriv();
    app.addToolButton({
    cName: "myToolButton",
    cLabel: "Flatten Active Form",
    cExec: "silentprint();",
    cTooltext: "Click to flatten active form.",
    cEnable: true,
    nPos: 0
    app.endPriv();
    toolbar();

    Hi Shawnny,
    Here are a few points:
    You can (or should be able to) bypass the security warning on your machine.
    There is no way you can set up the doc so other users won't see that warning. Security prefs are on by default.
    Setting up a privileged location should work. Try trusting the file and/or the folder on your machine.
    If that doesn't work, choose to Trust Always from the yellow message bar.
    If that doesn't work, look at the registry and see if you file is indeed trusted for silent printing and JavaScript. Details here: 9   Trust Methods — Acrobat Application Security Guide. Feel free to post your registry prefs here.
    The last option is un-check Enhanced Security in your preferences.
    hth,
    Ben

  • Some data connections only work if security prompts are manually clicked

    I am currently working on a PO form for our company and have run into a bit of a snag. I have one one database with two tables that populate a list of vendors and a list of PO #'s.
    On the form is a Get PO button that connects to the databse, gets the first available PO # that is available, updates the record to in use and addes a unique ID # (generated off the curren time of when the button was clicked) and then does another connection to the same database to get the PO  where the # = to that of the unique ID.
    Here is my problem. With the data connection, you get those prompts about this file is attempting to access the following database. If you click yes to them (first when the doc opens - two more come up when clicking the Get PO button) the form works exactly as intended. No problems
    Now if you check the box to remember this choice, and click yes to any of them, the PO # no longer gets displayed in the box. The database is being updated properly, but the subsequent connection with the select statement does not work.
    I have added the files as trusted sources with the same results. The only way the database is update and the number is displayed is if all data connection prompts are clicked yes each and every time.
    Any help would be appreciated. If it is needed I can update this post with the code I am using, but I am thinking this is more of a settings issue somewhere than it is with my code.
    Thanks
    Brian

    It looks like I figured out the cause, and it only sort of had to do with the security prompts. Apparently, the second connection was occuring before update was completing in the access database. The only reason it would work when clicking the prompts was it allowed an extra second or so for the update to happen, then run the check to get the next number. I somewhat adjusted for this by putting a timeout in the code, which I dont really like, but even a delay of 500 milliseconds makes it work.

  • UCS KVM Manger Security Prompt

    Since setting our UCS Manager to use HTTPS, we get security prompts when opening the KVM manager.
    After doing some traces, it looks like the KVM manager makes the following HTTP calls:
    http://fpdownload.adobe.com/pub/swz/crossdomain.xml
    http://fpdownload.adobe.com/crossdomain.xml
    As a result, the HTTPS verion of the KVM manager prompts saying there is unsecured content (the HTTP calls) on the page.
    It's not a huge deal to hit yes or no to get past it, but it seems like some lazy programming.
    Any ideas on if this will get fixed?  The fpdownload.adobe.com pages are available in HTTPS which would fix the issue.
    We are running 1.4.1j.

    OK...here's a link to the Cisco Bug Toolkit:
    http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
    I just opened CSCtn08512.  Might be a bit until it is viewable.  Of course, I could have missed an existing bug and it might be scrapped.
    Hope that helps!
    --Justin

  • Is it possible to disable security prompts on AT&T BlackBerry Curve???

    Hello all. I wrote an SMS application that successfully works on my BlackBerry 8310 (on AT&T Wireless). However, everytime I run the application, I get this annoying security prompt that says, "application <my application> has attempted to access the network. Would you like to allow this?". Is there any way I can get rid of this, as it has become VERY tedious to answer this prompt everytime I run the application. I have already gone into options-->advanced options-->permissions and have set everything to "allow" for my application with no success. I've been reading up on this subject and my first inclination would be to assume that it may not be possible due to AT&T/Cingular locking down the phone via the security domain built into the handset:
    (http://developer.att.com/developer/printArticle.jsp?detailId=11300207) 
    However, I have read in some places that people were hacking their j2me_domain_registry.sm file with some limited success. I did not see that anyone did this with a BlackBerry though. Has anyone had any experience or know of a way to achieve this. I don't even know how to go about finding this file on the BlackBerry as all the examples deal with non-GSM (CDMA) phones and they primarily deal with Motorola V3XX series. Any help would be greatly appreciated!
    Solved!
    Go to Solution.

    You should be able to get rid of this message by enabling firewall. Click on options then security then firewall. Enable and save.
    ~Lorrie~ Master of All Things Blackberry!

  • ADF security - prompt for user id and password again on page forward

    Hi,
    I am working with ADF using JDeveloper 10.1.3 with Business Components and ADF Faces.
    I have a Search page and a List page.
    Both pages are based on the same view within the same application module.
    The Search page is using the default Find and Execute Operations.
    The Execute button has an action that navigate to the List screen.
    faces-config.xml
    <navigation-rule>
    <from-view-id>/jspx/search.jspx</from-view-id>
    <navigation-case>
    <from-outcome>search</from-outcome>
    <to-view-id>/jspx/list.jspx</to-view-id>
    <redirect/>
    </navigation-case>
    </navigation-rule>
    <navigation-rule>
    <from-view-id>/jspx/list.jspx</from-view-id>
    <navigation-case>
    <from-outcome>find</from-outcome>
    <to-view-id>/jspx/search.jspx</to-view-id>
    <redirect/>
    </navigation-case>
    </navigation-rule>
    Security (Roles and Users) is based on the jazn-data.xml and web.xml
    URL Patterns for the pages have assigned to the role.
    Login Configuration is HTTP Digest Authentication
    <web-resource-collection>
    <web-resource-name>APP_SUPPORT</web-resource-name>
    <url-pattern>faces/jspx/search.jspx</url-pattern>
    <url-pattern>faces/jspx/list.jspx</url-pattern>
    </web-resource-collection>
    <auth-constraint>
    <role-name>APP_SUPPORT</role-name>
    </auth-constraint>
    <login-config>
    <auth-method>DIGEST</auth-method>
    </login-config>
    Everything is fine when running the application from JDeveloper,
    but when the application is deployed to the server (OC4J),
    After logging into the system, the Search page prompt for user id and password again
    on click of the Execute button.
    Have anyone experience this problem before?
    Thanks for any help.
    Jim

    Hi,
    does the same thing happen if you change your protected resource from:
    <web-resource-collection>
    <web-resource-name>APP_SUPPORT</web-resource-name>
    <url-pattern>faces/jspx/search.jspx</url-pattern>
    <url-pattern>faces/jspx/list.jspx</url-pattern>
    </web-resource-collection>to:
    <web-resource-collection>
    <web-resource-name>APP_SUPPORT</web-resource-name>
    <url-pattern>/faces/jspx/*</url-pattern>
    </web-resource-collection>Brenden

  • Security prompt when opening .msg files in SAP

    I have a customer that gets this prompt when opening an attachment in SAP.  The attachment was saved from Outollk so it is in .msg file format.  The customer is using Windows 7, and Office 2007.  This is from the customer:
    As discussed, below is a screen shot of the pop up I receive every time when opening an email attachment with T-Code VA02.  I use this function multiple times per day.  Even if I select “Always Allow,”  I continue to receive this pop up.

    Hello Ronald,
    Did you try to create a security rule at the SAP GUI?
    Access the SAP GUI "options", then "security" -> "security settings". Click at the "Open security configuration" button, and then at the "insert" button.
    Regards,
    Isaías

  • How to disable security prompts on OS X?

    How do I disable securty prompts when installing new programs? Below are some examples of what I mean. Also sometimes it asks for my password. It's very annoying. I want to turn these warnings and password promps off completely.
    Thank you

    vas12345 wrote:
    I have nothing against security but this prompt is an ineffective, basically useless feature. I downloaded the program in question, I clicked on it asking for it to be installed on my computer - this means that I wish for this program to be on my Mac. These prompts are not telling me anything I don't already know, i.e. that the application is from the internet and that I want to open it. Reminds me of Windows Vista with its never ending prompts.
    A much more useful feature would be a behind the scenes scan of the download file to see if it has any viruses or malware.
    But once you have accepted the install, then the fault no longer lies with Apple, but with you and/or the Third Party developer, making Apple exempt from blame if you stuff up your system with it. Simple business practice for protection. Keep clicking OK all you want, but don't come back here crying if your OSX has been severly compromised. A lot of us take security of our systems quite seriously.
    Cheers
    Pete

  • Disable Security prompt or message in dos command line

    Dear all,
    I am working on :
    - Windows 2003 server
    - Office 2007
    - Adobe Acrobat 9 standard
    When I run a dos command :
    C:\WWI>"C:\Program Files\Adobe\Acrobat 9.0\Acrobat\acrodist.exe" /n /q /o "C:\WWI\PS2PDF\Document1.PDF"  C:\WWI\PS2PDF\Document1.PS"
    I always have a confirmation message : "Confirm Security" with 3 options : Edit, Clear and Retain.
    My concern is to not display this prompt because the job is in a batch mode.
    So, could you please help me ?
    Anybody know if exist a command switch or a registry key in order to force Acrobat distiller to apply the defaults security parameters with a unique password ?
    I have contacted the Adobe support but nobody can help me.
    See below how I set parameters up in Adobe PDF printer and security settings
    Thank you for your help and assistance

    Distiller Server is discontinued, so I don't think Adobe intend Distiller to be run unattended any more.

  • Keep being asked security prompts?

    On any device (Ipad, Iphone 4S, Windows desktop), when purchasing any item (Ibook, Itunes, app store), I keep getting asked for username and to supply 3 security questions. I provide questions/answers, but can never get past that screen. A large black box appears and nothing is ever purchased or charged. If I close out and return later, I'm asked to re-select 3 security questions/answers. I re-enter same questions/answers, etc., etc. This has been going on several weeks.
    I have submitted this online through Apple express line twice, but never received any reply back after many days. I called Apple, but they said it would need to be addressed by Itunes. Online Itunes customer support has never responded. I've changed credit card information. I've gone online to try to submit questions/answers, but was asked a different single question under My Account. All very frustrating!
    I have to assume it's an account problem since affects all device and all products. But I can't find anyone anywhere to help resolve.
    Any suggestions for fixing? Or for a contact for resolving such issues (the "I'd really like to spend money on Apple products but your software won't let me" problem)?
    Thanks.

    Try browsing to My Apple ID to see if your username and password is accepted there.
    You might be able to find other helpful Apple ID info here too -> Frequently asked questions about Apple ID

  • OBIEE Data Level Security - Prompt While logging into the OBI Portal

    All,
    Below is what we are trying to see if it’s possible
    We have a BM say 'Sales and Profits' . This is a simple model built around 1 fact and 5 dimensions. The underlying tables contain data from 5 different geographic segments US-NE, US-SW,US-NW,US-Midwest, US-All Segments.
    The dimension table 'Segments' has all the above said values which are used to build reports related to each segment and all segments etc..
    We have Groups/Users assigned in the repository (Using OBI Rpd security) based on the above segments.
    If we want a user from 'US-NE' group to see only data related to his segment , we can add a filter condition to the group privilege tab ( Using SQL expression segment = 'US-NE') . This is straight forward.
    Now the problem part , if we have a user who should be able to access data from two segments ,how do we handle it ? . We don't want to go and create multiple groups and assign users to them from the RPD groups.
    Other ideas we considered were
    Duplicate the BM and add a filter through the LTS ( based on segment value) . Assign group permissions to the corresponding presentation models. This idea though has a lot of disadvantages. Firstly , it would mean creating several duplicate BM and every time we update the master BM we will have to update all duplicate models
    Another idea was to specify the filter based on presentation model, while assigning the group privileges ( Using the expression from Group permissions). This approach is at least cleaner in the sense we will have to deal with only 1 BM and 1 Presentation model., but we will run into the same problem of having to create multiple groups or assign users to multiple groups ( Users who will have access to multiple segments)
    An ideal solution -
    When a user tries to log in or immediately after he logs , Is there a way we can throw a pop-up that will force the user to select segment(s)? This should enforce the data restriction. I did not find a way to do this especially while using RPD based security model. Any ideas how we can do this ?
    Since the 'Segment' dimension table is applicable to all BM in our systems (All fact tables in our warehouse have a link to the Segment table). We would ideally want this implemented across all dashboards and reports within in the OBI portal
    SK

    Now the problem part , if we have a user who should be able to access data from two segments ,how do we handle it ?
    You handle it on the same way as 'US-NE'. You will create another group called say US-SW then add the filter to it and make sure the user belongs to both groups. OBIEE will translate this into IN('US-NE', 'US-SW').We don't want to go and create multiple groups and assign users to them from the RPD groups.
    You will need to create the groups but you can avoid having to asign them to the group in the RPD by using an init block to populate the GROUPS variable when the user logins.The other options are hacks...

  • Security prompt from Java with missing checkbox

    Hello,
    In our application we use jnlp link to launch java windows.
    When we click on the link, appear a sécurity prompt containing, the application name, the editor and 2 location for jnlp (The server adress and on a second line the text "Launched from the downloaded jnlp file")
    But in this prompt we don't have the checkbox : "Do not show this again..."  (We read this link https://www.java.com/en/download/help/appsecuritydialogs.xml#selfsigned)
    Do you know  why we don't have this checkbox ? 
    Sincerly

    jjegan wrote:
    public class NewClass2 {
    public static void main(String[] args) {
    Runtime p = Runtime.getRuntime();
    p.exec("cmd");
    I would like to invoke dos prompt from my java application. The above code is not working. What could be the problem? I am using Windows XP m/c with netbeans.You didn't give it hands and feet, i.e. you can't expect the cmd.exe process to fire up a terminal for its input and output; you have to do that yourself. Read all about the Input- and OutputStreams of those sub-processes in the API documentation of the Processs class.
    kind regards,
    Jos

  • Security Prompts for Internet and E-mail (E71)

    Re: Nokia E71
    Whenever I try to connect to an internet application like G-Mail or try to browse the internet it asks me "Allow application to use network and send or receive data". I then click "Yes", then it asks me to "Select Access Point" to which I selecr WLAN or Internet etc. And often it asks me over and over again.
    This is driving me crazy, how do I get rid of these promps so when I log on or start an application it automatically does what I want it to do without prompting me?
    Message Edited by hrashid170 on 21-Nov-2008 11:15 PM

    For Java applications like Gmail, Opera Mini, Widsets etc. there is a way to control Network Access "prompting" to some degree.
    Go to Menu -> Applications (or Installations) -> Application Manager and select given Java application from the list of installed applications.
    Then select "Options -> Settings" or "Options -> Open" (depending on your phone) and you should be able to designate certain Access Point for the application and also configure e.g. "Network Access" prompting behaviour for the particular application.
    Note that available prompting options may vary between different applications but typically there are options like "Not allowed", "Ask everytime" "Ask first time" and "Always allowed" to choose from.

  • Open File - Security Warning with Network-based Silent Install of CS4

    I am attempting to run an enterprise deployment of CS4 Design Standard Edition onto a pool of WinXP Pro workstations. I placed all of the install files on a networked server running Windows 2003, and generated from there all of the requisite .xml files (install, uninstall, and override files). From this network share, I can successfully run a silent install.
    HOWEVER. Multiple times (two or three) during the course of the silent install, I receive the same pop-up security warning from Windows XP (definitely an OS message, not anti-virus or other) that reads as follows:
    Open File - Security Warning
    Do you want to run this file?
    Name: AIRApplicationRunner.exe
    Publisher: Adobe Systems Incorporated
    Type: Application
    From: (server IP address)
    I have tried excluding Adobe Air from the installation package, but I still receive the same security prompt. This is sufficiently a hassle to have to click through these prompts in a silent install. But more importantly I am unable to run the silent install as part of a logoff script because for all intents & purposes it is no longer a silent install (i.e. it requires user intervention). To top it off, I found when testing the logoff script the prompts are suppressed and the installation fails prior to the bulk of the installation (Photoshop, Illustrator, & InDesign).
    I'm sure that I could run the install by copying all of the files to each local workstation, but again that would defeat the purpose of an easy, network-based install. In the past I was able to install CS3 in this fashion with no troubles, which of course did not include Adobe Air.
    Can anybody offer a suggestion as to how to disable these security messages, or alternately, how to entirely exclude Adobe Air from the install package? I have found a VB script that is supposed to address the security warnings issue, but to run the script also requires the user to accept it at a security prompt.
    Thanks in advance for any assistance!
    -Dan

    I'm now able to deploy design suite premium cs4 successfully.
    The issue for me was that the AirapplicationRunner installs some useless software. I worked around the issue with the Airapplicationrunner prompt by removing any apps that are installed using that method. By "removing" I mean marking that app as "donotinstall" in the deployment file. The apps I removed are these adobe codes for adobe media player, adobe.com, adobeair itself. The below is from my deploy.xml file used for the silent workflow:
    donotinstall
    donotinstall
    donotinstall
    If you mark those three adobe codes as "donotinstall" the prompt never appears and the real apps get installed just fine.

Maybe you are looking for